Now that RI docs are installed to a seperate output, we don't need to worry
about bloating the main output, so it's reasonable for this to be enabled by
default.
This allows getting access to Ruby documentation through ri by doing
nix-shell -p ruby ruby.devdoc
or by installing the ruby.devdoc package.
A setup hook will add a shim to LOAD_PATH to point ri to the devdoc
output instead of out.
Rather than rolling our own. This means that we can use all of the
extra functionality stdenv gives us, like being able to provide a list
of patches rather than just one.
Patching numpy.distutils used to be required for pythonPackages.cython
to build on darwin. It was later accidentally disabled during one of the
refactorings, but that did not break cython. This change reinstantiates
the patch. It still applies, so it should be low maintenance and it can
still be useful.
give priority to perl libraries when they meet the perl derivation in `buildEnv`.
The notable case is `buildEnv` inside `perl.withPackages`.
The `perl' derivation includes obsolete versions of some CPAN packages
which leads to collissions when there are newer versions
of the same libraries are on the right hand side
of `perl.withPackages` (perhaps indirectly).
Fixes#60025
spidermonkey doesn’t use the autotools build, host, target convention.
Instead it considers ‘--host’ to be the autotools’ ‘--build’ and
‘--target’ to be the autotools’ ‘--host’! As a result, we cannot
safely use “configurePlatforms”. Instead, we must manually set these
flags.
/cc @illegalprime
Originally introduced in 8970a9c and 1531b5e, these patches were lost in
efbe87f when the CPython version files were merged, likely due to
CPython 3.7 not needing them anymore. These patches should remain
in-tree until CPython 3.5 and 3.6 support is dropped completely.
Found with the diffoscope ( https://diffoscope.org/ ).
The upstream patch for distutils does not apply cleanly to Python
3.7.3's sources. (The patch applies cleanly to Python 3.7.2's sources,
but nixpkgs commit 0ddae82e6a upgraded
Python to 3.7.3.) Fix the patch to make python37 build on macOS.
`pkgsBuildTarget` allows us to avoid repeated and confusing conditions.
The others merely provide clarity for one the foreign package set's
target platform matters.
This round is without the systemd CVE,
as we don't have binaries for that yet.
BTW, I just ignore darwin binaries these days,
as I'd have to wait for weeks for them.
The only outside-curl uses of `fetchurlBoot` left are `stdenv`
and `apple-source-releases`. The latter one can probably be removed
too, but I can't test it.
Pros:
- Aggregates all behind-the-scenes insanity in a single place.
Cons:
- At the cost of 10 more derivations (but 0 new outpaths).
Perl likes to capture impure data, needlessly.
- Configure time (cf_time): make 1 second past epoch
- Target system (uname): use less uname information
* lua: generate packages from luarocks
* luarocks-nix: update
* removed packages already available in nixpkgs
* adressing reviews
update script can now accept another csv file as input with -c
* Remove obsolete comment
Comments on conflicts:
- llvm: d6f401e1 vs. 469ecc70 - docs for 6 and 7 say the default is
to build all targets, so we should be fine
- some pypi hashes: they were equivalent, just base16 vs. base32
We don't actually perform any network access, but since Racket 7.0,
when certain modules are loaded, they emit an annoying warning.
While compiling the bundled packages, this happens over and over and
pollutes the logs.
Having a correct SSL configuration prevents the warnings.
He prefers to contribute to his own nixpkgs fork triton.
Since he is still marked as maintainer in many packages
this leaves the wrong impression he still maintains those.
The wrapper is not needed because the runpath is already set correctly,
and LD_LIBRARY_PATH was breaking child processes linked against
different libc versions.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
These interpreters are prebuilt by upstream and patched using patchelf.
They are primarily added for testing purposes and development on the
non-prebuilt PyPy interpreters as it can speed up translation
significantly.
Drop `python.majorVersion`. For Python language version, use `python.pythonVersion`.
For implementation version, use `python.sourceVersion`.
Some expressions were broken. Those that were identified were fixed.
fixup major
This changeset allows for cross-compilation of Python packages. Packages
built with buildPythonPackage are not allowed to refer to the build
machine. Executables that have shebangs will refer to the host.
Each time a new major/minor version of CPython was released, a new
expression would be written, typically copied from the previous release.
Often fixes are only made in the current/latest release. By merging the
expressions it's more likely that modifications end up in all versions,
as is likely intended.
This commit introduces one expression for Python 3, and another for 2.7.
These two may also be merged, but it will result in a lot of extra
conditionals making the expression harder to follow.
A common passthru is introduced for CPython and PyPy.
python 2.7: use common passthru
updateScript accepts a list, in which case, it will execute the head with the
tail as arguments. Switching to this style will allow us to get rid of the need
to create extra script doing just that.
Enable autoreconfHook by default: The build tried to execute autoconf, which was
in the wrong build input. Regenerating autotools configure files is always a good
idea since it delivers fixes.
Also move groff to the native since it is only used at build-time
This fixes build errors like
GEN asn1ct_eval_ext.erl
{"init terminating in do_boot",{undef,[{asn1ct_func,start_link,[],[]},{prepare_templates,gen_asn1ct_eval,1,[{file,"prepare_templates.erl"},{line,58}]},{init,start_em,1,[]},{init,do_boot,3,[]}]}}
init terminating in do_boot ({undef,[{asn1ct_func,start_link,[],[]},{prepare_templates,gen_asn1ct_eval,1,[{_},{_}]},{init,start_em,1,[]},{init,do_boot,3,[]}]})
that occur on some machines but not others.
All Python packages now have an updateScript. The script calls
`update-python-libraries` and passes it the position of the derivation
expression obtained using `meta.position`. This works fine in case a Nix
expression represents only a single derivation. If there are more in it,
`update-python-libraries` will fail.
Instead of pinning Darwin to older versions, add small patches to
configure.in (7.1) / configure.ac (7.2) to fix the build of the intl
extension on recent PHP versions on Darwin.
fix-paths-php7.patch also required changes -- since we now run autoconf
at build time (through ./buildconf), it needs to patch the input .m4
files instead of ./configure directly.
Do not refer to <nixpkgs> as it will produce the following message:
"evaluation aborted with the following error message: 'Illegal use of <nixpkgs> in Nixpkgs.'"
Python 3.4 will receive it's final patch release in March 2019 and there won't
be any releases anymore after that, so also not during NixOS 2019.03.
Python 3.4 is not used anymore in Nixpkgs. In any case, migrating code from
3.4 to 3.4+ is trivial.
By default all warnings were printed. This occasionally resulted in
a lot of warnings leading to builds being killed.
This commit reduces the amount of warnings printed.
`python.buildEnv` would already wrap executables exporting `PYTHONHOME`.
With this change, it is possible to pass in additional arguments to the
underlying `makeWrapper`.
"But Synthetica", I hear you say, "isn't that a downgrade?".
That's what I originally thought as well! So I emailed the maintainer
for the only other repo that had J on version 808, BSD FreePorts. Since
they also didn't know what was going on here, I emailed Jsoftware
themselves. I got a lovely email back from Mr. Iverson (Jr. I presume?)
himself:
So it has been confirmed from the horse's mouth that this _is_ the
correct version to be on.
I also re-enabled all the tests, since they all pass now, enabled the
build on ARM and Darwin (I don't have access to either kind of machine,
but I don't see why it wouldn't work), and added myself as a maintainer.
PHP tries to discover the mysql default socket path during configure
phase by probing the file system:
cf3b852109/ext/mysqli/config.m4 (L4)
This obviously fails to discover /run/mysqld/mysqld.sock, which is being
used (hardcoded) across all MySQL flavours.
This leads to PHP having no mysql socket path set for the mysql[i]
extensions, and `/tmp/mysql.sock` set for pdo_mysql,
meaning one currently has to manually configure and set it in php.ini.
Luckily, PHP supports setting that path via
`--with-mysql-sock=/run/mysqld/mysqld.sock` during configure phase,
so let's do this as soon as one of the three modules is enabled.
As per the following bug report, sometimes erts/start_scripts will fail
to compile because of a Makefile ordering issue. Apply the upstream
patches to fix this.
https://bugs.erlang.org/browse/ERL-241
This way we don't need to disable flags etc by platform and can still
backport new versions to stable for linux even if there's a bug or
something in the darwin build.
This also updates the bootstrap tool builder to LLVM 5, but not the ones
we actually use for bootstrap. I'll make that change in a subsequent commit
so as to provide traceable provenance of the bootstrap tools.
Both 5.6 and 7.0 is currently on life support, as in only recieving
security related patches.
This will only continue until:
- 2018-12-31 for PHP 5.6
- 2018-12-01 for PHP 7.0
Both these dates are in the middle of the 18.09 lifecycle. So it would
be nice to not have them in the 18.09 stable release. Dropping them
now would also result in less maintanance in updating them.
The death dates can be seen on both these links:
- https://secure.php.net/supported-versions.php
- https://en.wikipedia.org/wiki/PHP#Release_history
MySQL Native Driver was implemented by PHP back in 5.3.0 and has been
default in most distributions for a very long time.
The option was added in 41cd4f2459 and I
don't see any reason why it would default to false.
Overview of mysqlnd by PHP: https://secure.php.net/manual/en/mysqlnd.overview.php
* substitute(): --subst-var was silently coercing to "" if the variable does not exist.
* libffi: simplify using `checkInputs`
* pythonPackges.hypothesis, pythonPackages.pytest: simpify dependency cycle fix
* utillinux: 2.32 -> 2.32.1
https://lkml.org/lkml/2018/7/16/532
* busybox: 1.29.0 -> 1.29.1
* bind: 9.12.1-P2 -> 9.12.2
https://ftp.isc.org/isc/bind9/9.12.2/RELEASE-NOTES-bind-9.12.2.html
* curl: 7.60.0 -> 7.61.0
* gvfs: make tests run, but disable
* ilmbase: disable tests on i686. Spooky!
* mdds: fix tests
* git: disable checks as tests are run in installcheck
* ruby: disable tests
* libcommuni: disable checks as tests are run in installcheck
* librdf: make tests run, but disable
* neon, neon_0_29: make tests run, but disable
* pciutils: 3.6.0 -> 3.6.1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools. This update was made based on information from https://repology.org/metapackage/pciutils/versions.
* mesa: more include fixes
mostly from void-linux (thanks!)
* npth: 1.5 -> 1.6
minor bump
* boost167: Add lockfree next_prior patch
* stdenv: cleanup darwin bootstrapping
Also gets rid of the full python and some of it's dependencies in the
stdenv build closure.
* Revert "pciutils: use standardized equivalent for canonicalize_file_name"
This reverts commit f8db20fb3a.
Patching should no longer be needed with 3.6.1.
* binutils-wrapper: Try to avoid adding unnecessary -L flags
(cherry picked from commit f3758258b8895508475caf83e92bfb236a27ceb9)
Signed-off-by: Domen Kožar <domen@dev.si>
* libffi: don't check on darwin
libffi usages in stdenv broken darwin. We need to disable doCheck for that case.
* "rm $out/share/icons/hicolor/icon-theme.cache" -> hicolor-icon-theme setup-hook
* python.pkgs.pytest: setupHook to prevent creation of .pytest-cache folder, fixes#40273
When `py.test` was run with a folder as argument, it would not only
search for tests in that folder, but also create a .pytest-cache folder.
Not only is this state we don't want, but it was also causing
collisions.
* parity-ui: fix after merge
* python.pkgs.pytest-flake8: disable test, fix build
* Revert "meson: 0.46.1 -> 0.47.0"
With meson 0.47.0 (or 0.47.1, or git)
things are very wrong re:rpath handling
resulting in at best missing libs but
even corrupt binaries :(.
When we run patchelf it masks the problem
by removing obviously busted paths.
Which is probably why this wasn't noticed immediately.
Unfortunately the binary already
has a long series of paths scribbled
in a space intended for a much smaller string;
in my testing it was something like
lengths were 67 with 300+ written to it.
I think we've reported the relevant issues upstream,
but unfortunately it appears our patches
are what introduces the overwrite/corruption
(by no longer being correct in what they assume)
This doesn't look so bad to fix but it's
not something I can spend more time on
at the moment.
--
Interestingly the overwritten string data
(because it is scribbled past the bounds)
remains in the binary and is why we're suddenly
seeing unexpected references in various builds
-- notably this is is the reason we're
seeing the "extra-utils" breakage
that entirely crippled NixOS on master
(and probably on staging before?).
Fixes#43650.
This reverts commit 305ac4dade.
(cherry picked from commit 273d68eff8f7b6cd4ebed3718e5078a0f43cb55d)
Signed-off-by: Domen Kožar <domen@dev.si>
Since years I'm not maintaining anything of the list below other
than some updates when I needed them for some reason. Other people
is doing that maintenance on my behalf so I better take me out but
for very few packages. Finally!
That way 'epmd' can be started by systemd using socket
activation. This is important to have when there is more than one
Erlang system used on the same host.
Support for this exists since 17.0:
b7c95eabf6
Configure flag was added in 17.1:
12cd5e5b39
This makes the command ‘nix-env -qa -f. --arg config '{skipAliases =
true;}'’ work in Nixpkgs.
Misc...
- qtikz: use libsForQt5.callPackage
This ensures we get the right poppler.
- rewrites:
docbook5_xsl -> docbook_xsl_ns
docbook_xml_xslt -> docbook_xsl
diffpdf: fixup
* treewide: http -> https sources
This updates the source urls of all top-level packages from http to
https where possible.
* buildtorrent: fix url and tab -> spaces
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/php/versions.
These checks were done:
- built on NixOS
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/phar.phar passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/phar passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/php passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/phpdbg passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/php-cgi passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/pear passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/peardev passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/pecl passed the binary check.
- /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7/bin/php-fpm passed the binary check.
- 9 of 9 passed binary check by having a zero exit code.
- 0 of 9 passed binary check by having the new version present in output.
- found 7.2.7 with grep in /nix/store/n62w6pi30bkz1i08h1wr1icrabkky794-php-7.2.7
- directory tree listing: https://gist.github.com/6ecb6c21e261466b865908a41564ca3e
- du listing: https://gist.github.com/2ca1dc05af5d5240a6b63fadd59ee0d0
Some applications try to build using `pkgconfig lua5.3 --libs...` as some major
distributions use this name. Add a symlink to the lua.pc pkgconfig file.
Signed-off-by: Roosembert Palacios <roosembert.palacios@epfl.ch>
LLVM building is apparently broken. This is a similar fix to what was
done in spidermonkey_38.
enableReadline flag is also introduced (defaults to true except on darwin).
In particular, this contains Firefox-related and libgcrypt updates.
Other larger rebuilds would apparently need lots of time to catch up
on Hydra, due to nontrivial rebuilds in other branches than staging.
Racket checks the current platform via uname, then disallows
unix domain socket usage based on the result. Previously, it could not
successfully call uname at all, so it fell back to denying UDS.
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/jruby/versions.
These checks were done:
- built on NixOS
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/rake had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/ast had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/jgem had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/jirb had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/jirb_swing had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/gem had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/ri had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/irb had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/testrb had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/rdoc had a zero exit code or showed the expected version
- Warning: no invocation of /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/jrubyc had a zero exit code or showed the expected version
- /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/jruby passed the binary check.
- /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/jruby.bash passed the binary check.
- /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/ruby passed the binary check.
- /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/.jruby-wrapped passed the binary check.
- /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0/bin/.jruby.bash-wrapped passed the binary check.
- 5 of 16 passed binary check by having a zero exit code.
- 0 of 16 passed binary check by having the new version present in output.
- found 9.2.0.0 with grep in /nix/store/mxi03kwk4c23xpfjpqv1ggfkyf50wjkn-jruby-9.2.0.0
- directory tree listing: https://gist.github.com/4fecc39e96054dd41278b1d505cdb498
- du listing: https://gist.github.com/6382ad0545e74f9ff62a410b61801232
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/php/versions.
These checks were done:
- built on NixOS
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/phar.phar passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/phar passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/php passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/phpdbg passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/php-cgi passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/pear passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/peardev passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/pecl passed the binary check.
- /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6/bin/php-fpm passed the binary check.
- 9 of 9 passed binary check by having a zero exit code.
- 0 of 9 passed binary check by having the new version present in output.
- found 7.2.6 with grep in /nix/store/25l2hz7njpg9glpmslcadkgqwai5f77s-php-7.2.6
- directory tree listing: https://gist.github.com/409d2cfaa7e805714825281fbaba0d0f
- du listing: https://gist.github.com/7fbd8e3d56524f70b3dfb94c045fccd2
The upstream src URL for the patch appears to no longer exist. Per discussion in
https://github.com/NixOS/nixpkgs/issues/39927, the upstream URL is not stable,
so this commit inlines the patch in the nixpkgs src tree.
The hack of using `crossConfig` to enforce stricter handling of
dependencies is replaced with a dedicated `strictDeps` for that purpose.
(Experience has shown that my punning was a terrible idea that made more
difficult and embarrising to teach teach.)
Now that is is clear, a few packages now use `strictDeps`, to fix
various bugs:
- bintools-wrapper and cc-wrapper
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/spidermonkey/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/47rbdzbgccrrdc63fnsnwklria9clmms-spidermonkey-52.7.4/bin/js52 -h’ got 0 exit code
- ran ‘/nix/store/47rbdzbgccrrdc63fnsnwklria9clmms-spidermonkey-52.7.4/bin/js52 --help’ got 0 exit code
- ran ‘/nix/store/47rbdzbgccrrdc63fnsnwklria9clmms-spidermonkey-52.7.4/bin/js52 -v’ and found version 52.7.4
- ran ‘/nix/store/47rbdzbgccrrdc63fnsnwklria9clmms-spidermonkey-52.7.4/bin/js52 --version’ and found version 52.7.4
- ran ‘/nix/store/47rbdzbgccrrdc63fnsnwklria9clmms-spidermonkey-52.7.4/bin/js52-config --version’ and found version 52.7.4
- found 52.7.4 with grep in /nix/store/47rbdzbgccrrdc63fnsnwklria9clmms-spidermonkey-52.7.4
- directory tree listing: https://gist.github.com/7e5182415a0a1bce8071576312c08a3a
Note that a bunch of non-python packages use this attribute already.
Some of those are clearly unaware of the fact that this attribute does
not exists in stdenv because they define it but don't to add it to
their `bulidInputs` :)
Also note that I use `buildInputs` here and only handle regular
builds because python and haskell builders do it this way and I'm not
sure how to properly handle the cross-compilation case.
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/jruby/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0/bin/jruby -h’ got 0 exit code
- ran ‘/nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0/bin/jruby --help’ got 0 exit code
- ran ‘/nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0/bin/jruby.bash -h’ got 0 exit code
- ran ‘/nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0/bin/jruby.bash --help’ got 0 exit code
- ran ‘/nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0/bin/ruby -h’ got 0 exit code
- ran ‘/nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0/bin/ruby --help’ got 0 exit code
- found 9.1.17.0 with grep in /nix/store/g4a83h4462412zd3cf95j5ny19bxgha6-jruby-9.1.17.0
- directory tree listing: https://gist.github.com/20468ca63db765e0d42a1c93191f0901
upstream issue:
https://bugs.python.org/issue31940
There are two PR's proposed to fix this,
but both seem to be stalling waiting for review.
I previously used what appears to be the favored
of the two approaches[1] to fix this,
with plan of keeping it musl-only until PR was merged.
However, while writing up a commit message
explaining the problem and why it needed fixing...
I investigated a bit and found it increasingly
hard to justify anything other than ...
simply not using lchmod.
Here's what I found:
* lchmod is non-POSIX, seems BSD-only these days
* Functionality of lchmod isn't supported on Linux
* best scenario on Linux would be an error
* POSIX does provide lchmod-esque functionality
with fchmodat(), which AFAICT is generally preferred.
* Python intentionally overlooks fchmodat()[2]
electing instead to use lchmod() behavior
as a proxy for whether fchmodat() "works".
I'm not sure I follow their reasoning...
* both glibc and musl provide lchmod impls:
* glibc returns ENOSYS "not implemented"
* musl implements lchmod with fchmodat(),
and so returns EOPNOTSUPP "op not supported"
* Python doesn't expect EOPNOTSUPP from lchmod,
since it's not valid on BSD's lchmod.
* "configure" doesn't actually check lchmod usefully,
instead checks for glibc preprocessor defines
to indicate if the function is just a stub[3];
somewhat fittingly, if the magic macros are defined
then the next line of the C source is "choke me",
causing the compiler to trip, fall, and point
a finger at whatever is near where it ends up.
(somewhat amusing, but AFAIK effective way to get an error :P)
I'm leaving out links to threads on mailing lists and such,
but for now I hope I've convinced you
(or to those reading commit history: explained my reasons)
that this is a bit of a mess[4].
And so instead of making a big mess messier,
and with hopes of never thinking about this again,
I propose we simply tell Python "don't use lchmod" on Linux.
[1] https://github.com/python/cpython/pull/4783
[2] 28453feaa8/Lib/os.py (L144)
[3] 28453feaa8/configure (L2198)
[4] Messes happen, no good intention goes unpunished :).
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
(cherry picked from commit ba52ae5048)
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/j/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/s4j1rrnwdrrqdaiyqci4c0cqy3azlnl2-j-808/bin/jconsole -h’ got 0 exit code
- ran ‘/nix/store/s4j1rrnwdrrqdaiyqci4c0cqy3azlnl2-j-808/bin/jconsole --help’ got 0 exit code
- ran ‘/nix/store/s4j1rrnwdrrqdaiyqci4c0cqy3azlnl2-j-808/bin/jconsole help’ got 0 exit code
- found 808 with grep in /nix/store/s4j1rrnwdrrqdaiyqci4c0cqy3azlnl2-j-808
- directory tree listing: https://gist.github.com/3c6f38056c15de42a7496ff1f576064e
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/supercollider/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/4azhvz3aw8jkcs3vib2aaii15yq5rr8k-supercollider-3.9.3/bin/supernova -h’ got 0 exit code
- ran ‘/nix/store/4azhvz3aw8jkcs3vib2aaii15yq5rr8k-supercollider-3.9.3/bin/supernova --help’ got 0 exit code
- ran ‘/nix/store/4azhvz3aw8jkcs3vib2aaii15yq5rr8k-supercollider-3.9.3/bin/sclang -h’ got 0 exit code
- found 3.9.3 with grep in /nix/store/4azhvz3aw8jkcs3vib2aaii15yq5rr8k-supercollider-3.9.3
- directory tree listing: https://gist.github.com/1dcdb0888d56e74baf1a827e371acad1
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/renpy/versions.
These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 6.99.14.2 with grep in /nix/store/ppm0viw59sf9hl0c6m9i84zf68yyjnhi-renpy-6.99.14.2
- found 6.99.14.2 in filename of file in /nix/store/ppm0viw59sf9hl0c6m9i84zf68yyjnhi-renpy-6.99.14.2
- directory tree listing: https://gist.github.com/0e25657f100ee2ecfeda5f3e8fb08167
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/supercollider/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/scsynth -v` and found version 3.9.2
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/supernova -h` got 0 exit code
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/supernova --help` got 0 exit code
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/supernova -v` and found version 3.9.2
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/supernova --version` and found version 3.9.2
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/sclang -h` got 0 exit code
- ran `/nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2/bin/sclang -v` and found version 3.9.2
- found 3.9.2 with grep in /nix/store/a6z8q6az7fzhh0sp4llp4fzp8c95bm6y-supercollider-3.9.2
- directory tree listing: https://gist.github.com/5b90384fd1df273cba0757c752a352d6
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/php/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/phar.phar help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/phar.phar version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/phar.phar help` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php -h` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php --help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php -v` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php --version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/phpdbg -V` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/phpdbg --version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-cgi -h` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-cgi --help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-cgi -v` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-cgi --version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pear -h` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pear --help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pear help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pear -V` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pear version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/peardev -h` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/peardev --help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/peardev help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/peardev -V` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/peardev version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pecl -h` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pecl --help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pecl help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pecl -V` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/pecl version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-fpm -h` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-fpm --help` got 0 exit code
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-fpm -v` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-fpm --version` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-fpm -h` and found version 7.2.4
- ran `/nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4/bin/php-fpm --help` and found version 7.2.4
- found 7.2.4 with grep in /nix/store/jkzy4favahn0mxn1i9ags1zazg4z7y8l-php-7.2.4
- directory tree listing: https://gist.github.com/3c197892ad9174dae3d07c1dd61b418c
Erlang's generic-builder isn't using the right /bin/sh in some
situations, causing build errors either in the erlang build itself or
in derivations depending on it.
This patch runs `patchShebangs make/` before running the rest of the
`postPatch` phase, hopefully using the right shell early enough.
This might be a solution for #36853, #36823 and #37638.
mostly just forward environment variables to make arguments,
this partially reverts 5d1e51a199
which removed them because they're already set in env--
but that's not enough to override make vars.
Also, readline is buildInput not nativeBuildInput
(we need headers and to link against it)
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/grape -h` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/grape --help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/grape help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/grape -v` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/grape --version` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/java2groovy -h` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/java2groovy --help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/java2groovy help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovy -h` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovy --help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovy -v` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovy --version` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovydoc --help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovydoc --version` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovyc -h` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovyc --help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovyc -v` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovyc --version` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovysh -h` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovysh --help` got 0 exit code
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovysh -V` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovysh --version` and found version 2.4.14
- ran `/nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14/bin/groovyConsole --help` got 0 exit code
- found 2.4.14 with grep in /nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14
- found 2.4.14 in filename of file in /nix/store/x26aa3454yhk91kncw7nnzl0pw4piwsy-groovy-2.4.14
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/scsynth -v` and found version 3.9.1
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/supernova -h` got 0 exit code
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/supernova --help` got 0 exit code
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/supernova -v` and found version 3.9.1
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/supernova --version` and found version 3.9.1
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/sclang -h` got 0 exit code
- ran `/nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1/bin/sclang -v` and found version 3.9.1
- found 3.9.1 with grep in /nix/store/4wlhzjj8k4a49dvpzgwhll2m03hvvcz9-supercollider-3.9.1
This involved:
* Installing miniperl as $dev/bin/perl
* Setting miniperl to take INC from
lib/perl5/{site_perl/,}cross_perl/${version} as well as
lib/perl5/{site_perl/,}/${version}/${runtimeArch}, in that
order. miniperl taking from runtimeArch is not really correct, but
it works in some pure-perl cases (e.g. Config.pm) and can be
overridden with the cross_perl variant.
* Installing perl-cross's stubs into
$dev/lib/perl5/cross_perl/${version}
* Patching MakeMaker.pm to gracefully degrade (very slightly) if B.pm
can't be loaded, which it can't in cross-compilation.
* Passing the right build-time and runtime perls to Makefile.PL
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby -h` got 0 exit code
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby --help` got 0 exit code
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby -v` and found version 9.1.16.0
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby --version` and found version 9.1.16.0
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby.bash -h` got 0 exit code
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby.bash --help` got 0 exit code
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby.bash -v` and found version 9.1.16.0
- ran `/nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0/bin/jruby.bash --version` and found version 9.1.16.0
- found 9.1.16.0 with grep in /nix/store/yxs5d6pasfvp6000pm1sqhj89iirj3mv-jruby-9.1.16.0
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin/bin/joker -h` got 0 exit code
- ran `/nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin/bin/joker --help` got 0 exit code
- ran `/nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin/bin/joker help` got 0 exit code
- ran `/nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin/bin/joker -v` and found version 0.8.9
- ran `/nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin/bin/joker --version` and found version 0.8.9
- found 0.8.9 with grep in /nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin
- found 0.8.9 in filename of file in /nix/store/16sl6aacbf5yg39jy7k5851ixs26hsnh-joker-0.8.9-bin
cc "@andrestylianos @ehmry @lethalman"
Technically, racket compiles and packages too, but it doesn't pass all
tests yet, so the build fails.
gcc7Stdenv is GCC 7 with the MacOS-specific adaptations retained.
Building on MacOS with that works, but we should be using clang.
I'm hoping that the next person wanting to override the compiler
version in some other derivation sees that attribute and doesn't
inadvertently break a MacOS build again.
* remove EOL ruby versions for security and maintenance reasons.
* only expose ruby_MAJOR_MINOR to the top-level. we don't provide
guarantees for the TINY version.
* mark all related packages as broken
* switch the default ruby version from 2.3.x to 2.4.x
Documents the reason why it's needed and also prevents the
ensureNewerSourcesHook call being evaluated again and again for every
single Python package.
Racket without the bundled packages, such as Mr Racket.
The essential package racket-libs is included, as well as libraries
that live in collections. In particular, raco and the pkg library are
still bundled.
This hardcoded list of CFFI extension modules gets stale when PyPy adds
more, but fortunately the main translation step already builds these now
(hack_for_cffi_modules in pypy/goal/targetpypystandalone.py).
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Wrappers already included `PYTHONNOUSERSITE=1`, but now this env var is
also set in the Python setup hook. This improves purity in case of
non-sandboxes builds and nix-shell.
The `PYTHONNOUSERSITE` was exported to prevent impurities during
runtime. The downside of exporting environment variables is that they
always propagate all the way down the process tree, unless they are
explicitly unset at some point. Using the `-s` argument applies it only
to the process executed in the wrapper. That way, subprocesses are free
to do impure things.
Clojure 1.9 adds native cli tools, which are now used instead of
creating a java wrapper with a clojure.jar arguments. See
https://clojure.org/guides/deps_and_cli for more details on
clojure native cli tools.
When a Python script has the extension `.py`, bytecode is generated.
Typically, executables in bin have no extension, so no bytecode is
generated. However, some packages do provide executables with
extensions, and thus bytecode is generated.
28299f669a introduced the first Python
packages having multiple outputs. The required outputs were not picked
up by `python.buildEnv` (#31857).
This commit modifies `python.buildEnv` so that it always includes the
$out output and thus fixes#31857.
Python libraries or modules now have an attribute `pythonModule = interpreter;` to indicate
they provide Python modules for the specified `interpreter`.
The package set provides the following helper functions:
- hasPythonModule: Check whether a derivation provides a Python module.
- requiredPythonModules: Recurse into a list of Python modules, returning all Python modules that are required.
- makePythonPath: Create a PYTHONPATH from a list of Python modules.
Also included in this commit is:
- disabledIf: Helper function for disabling non-buildPythonPackage functions.
This continues #23374, which always kept around both attributes, by
always including both propagated files: `propgated-native-build-inputs`
and `propagated-build-inputs`. `nativePkgs` and `crossPkgs` are still
defined as before, however, so this change should only barely
observable.
This is an incremental step to fully keeping the dependencies separate
in all cases.
One should depend on
- `stdenv.cc.bintools`: for executables at build time
- `libbfd` or `libiberty`: for those libraries
- `targetPackages.cc.bintools`: for exectuables at *run* time
- `binutils`: only for specifically GNU Binutils's executables, regardless of
the host platform, at run time.
Fixes the build failure after the upgrade to glibc 2.26 in
9bb67d5c1e.
From the cfree(3) manpage:
This function should never be used. Use free(3) instead. Starting with
version 2.26, it has been removed from glibc.
From the glibc 2.26 release notes[1]:
* The obsolete function cfree has been removed. Applications should use
free instead.
[1]: https://sourceware.org/ml/libc-alpha/2017-08/msg00010.html
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @7c6f434c, @tohl
The `make regression` line was failing because the expression was
downloading a core-system-only, no-libraries source tarball. I
switched to using fetchFromGitHub, which downloads the full source
code -- the core system as well as the "community books",
i.e. libraries -- but the libraries unfortunately do not build yet
because they have more dependencies than the core system, and they
also run into some impurity problems during the build process.
This commit changes the ACL2 package so that at least the user will
obtain the latest version of the core system, even though they won't
get the community books. In a later commit I hope to fix this; it
will require either changes to ACL2 itself, or a patch to be applied
to ACL2 in nixpkgs.
ACL2 7.4 has no trouble building on the current version of SBCL in
nixpkgs, so I let it do so instead of using the ancient SBCL version
1.2.0 from 2014.
I also added myself as a maintainer to this package, since I'm an
active contributor to the ACL2 project and am interested in seeing it
working on Nix.
Overriding INSTALL_INC caused luajit to be installed directly into the
`include/` directory instead of `include/luajit-${version}` as normally
expected. Previously the path indicated in the pkg-config file also did
not match the actual header file location.
In the maintenance release bump in
90059701a8 a certain change to /test/ was
backported from Python 3:
- bpo-30207: To simplify backports from Python 3, the test.test_support
module was converted into a package and renamed to test.support. The
test.script_helper module was moved into the test.support package.
Names test.test_support and test.script_helper are left as aliases to
test.support and test.support.script_helper.
libffi needs a patch to actually work on aarch64 (or the cffi Python package
fails its testsuite). Of course the bundled version of libffi has the
same bug, so don't use the buggy version on aarch64.
Python3 already uses the system libffi on all platforms. I don't know
why Python2 doesn't.
Fixes a number of CVEs:
- a DNS request hijacking vulnerability. (CVE-2017-0902)
- an ANSI escape sequence vulnerability. (CVE-2017-0899)
- a DoS vulnerability in the query command. (CVE-2017-0900)
- a vulnerability in the gem installer that allowed a malicious gem to overwrite arbitrary files. (CVE-2017-0901)
While we tell pip not to fetch (with the `--no-index` option),
`setuptools` can do so itself. In the past we used a `distutils.cfg`
with `allow-hosts = None` to prevent setuptools from fetching itself.
This was removed when we started building wheels in
2562f94de4e4fd2ddc677187fa2e2848L69.
The `dist-utils.cfg` code was still there, and adding it to
`buildInputs` is sufficient.
Tested with python.pkgs.passlib by removing the `checkInputs` / `nose`.
This reverts commit 0a944b345e, reversing
changes made to 61733ed6cc.
I dislike these massive stdenv changes with unclear motivation,
especially when they involve gratuitous mass renames like NIX_CC ->
NIX_BINUTILS. The previous such rename (NIX_GCC -> NIX_CC) caused
months of pain, so let's not do that again.
It's now the default. /cc #19456
This makes a real build simplification, because in our current
bootstrapping+aliases, `gcc6` attribute is not the default compiler
but a derivation *built by* the default compiler.
nix-exec didn't build before this commit already
test.{support, regrtest} are the internal packages cpython
developers use to write tests.
Although they are not public and the API may change/break
some developers use these packages to write tests for their
(3rd party) software.
The derivations for cpython now only remove the actual tests
but leave the packages in place that are used to write them.
Discussion: https://github.com/NixOS/nixpkgs/pull/28540
* pgadmin: use https homepage
* msn-pecan: move homepage to github
google code is now unavailable
* pidgin-latex: use https for homepage
* pidgin-opensteamworks: use github for homepage
google code is unavailable
* putty: use https for homepage
* ponylang: use https for homepage
* picolisp: use https for homepage
* phonon: use https for homepage
* pugixml: use https for homepage
* pioneer: use https for homepage
* packer: use https for homepage
* pokerth: usee https for homepage
* procps-ng: use https for homepage
* pycaml: use https for homepage
* proot: move homepage to .github.io
* pius: use https for homepage
* pdfread: use https for homepage
* postgresql: use https for homepage
* ponysay: move homepage to new site
* prometheus: use https for homepage
* powerdns: use https for homepage
* pm-utils: use https for homepage
* patchelf: move homepage to https
* tesseract: move homepage to github
* quodlibet: move homepage from google code
* jbrout: move homepage from google code
* eiskaltdcpp: move homepage to github
* nodejs: use https to homepage
* nix: use https for homepage
* pdf2djvu: move homepage from google code
* game-music-emu: move homepage from google code
* vacuum: move homepae from google code
Symbolic links were added pointing to the executables that end with 3 as
part of the Python 2 to 3 migration. At some point I disabled ensurepip
but forgot to remove this symbolic link.
Symbolic links were added pointing to the executables that end with 3 as
part of the Python 2 to 3 migration. At some point I disabled ensurepip
but forgot to remove this symbolic link.
Symbolic links were added pointing to the executables that end with 3 as
part of the Python 2 to 3 migration. At some point I disabled ensurepip
but forgot to remove this symbolic link.
* pkgs: refactor needless quoting of homepage meta attribute
A lot of packages are needlessly quoting the homepage meta attribute
(about 1400, 22%), this commit refactors all of those instances.
* pkgs: Fixing some links that were wrongfully unquoted in the previous
commit
* Fixed some instances
Python envs did not pass through any of the properties the Python
interpreter has. That could be annoying, especially not having
`python.interpreter` which is the path to the interpreter. This commit
fixes the situation and inherit python.passthru.
- Adds the necessary passthru vars for bundler, bundix, etc. to accept
the package as a ruby.
- Adds the devEnv attribute, so that jruby.devEnv can be used to get
an environment with bundler and bundix installed.
Other executables all invoke jruby, and so don't need to be wrapped.
In some cases wrapping breaks the executables because one file is a ruby
script that directly loads the other (e.g. `gem` is a wrapper that loads
`jgem`). In this case, if the latter script has been wrapped by nix,
loading will fail.
I suppose 2.1 with caveats with some pointers is better than nothing.
I'm sorry for the potential confusion. In particular, the problem
about 64-bit pointers is the same in 2.0 and 2.1, despite the warning
only being shown for 2.1 on the web site.
Graham Christensen
Alyssa Ross
Renaud
Frederik Rietdijk
Elis Hirwing
Ben Hamlin
Robert Schütz
volth
Matthew Bauer
Andrew Miller
Matthieu Coudron
Ihar Hrachyshka
Daiderd Jordan
Dmitry Kalinkin
Will Dietz
Michael Raskin
Jan Tojnar
volth
Samuel Dionne-Riel
Daniel Schaefer
andrewchambers
Frederik Rietdijk
bb010g
Ernestas Lisauskas
Michael Eden
R. RyanTM
Matthew Glazar
Corbin
Matthias Beyer
John Ericson
John Ericson
Wael M. Nasreddine
José Luis Lafuente
Sarah Brofeldt
Mario Rodas
Lancelot SIX
Izorkin
Vladimír Čunát
Lancelot SIX
Dan Callahan
Vladimír Čunát
Florian Friesdorf
Jan Malakhovski
Aaron Andersen
Hlöðver Sigurðsson
Averell Dalton
Pascal Wittmann
Matthieu Coudron
Claes Wallin (韋嘉誠)
Claes Wallin (韋嘉誠)
Herwig Hochleitner
Jean-Philippe Cugnet
Nathan van Doorn
Jörg Thalheim
adisbladis
Jörg Thalheim
rnhmjoj
Anders Kaseorg
Francesco Gazzetta
xeji
Danylo Hlynskyi
Robin Gloster
Rommel MARTINEZ
Piotr Bogdan
Lengyel Balazs
Franz Pletz
Joaquim Pedro França Simão
Maximilian Bosch
Tor Hedin Brønner
Vladyslav M
Nathan van Doorn
Ivan Kozik
Pierre Bourdon
Timo Kaufmann
Travis Athougies
Tim Steinbach
Orivej Desh
André Stylianos Ramos
Yury Bulka
Andrew Miller
Tobias Pflug
Tuomas Tynkkynen
geistesk
Tim Digel
zimbatm
Jean-Philippe Cugnet
Silvan Mosberger
Jos van Bakel
Patrick Hilhorst
bitmappergit
John Ericson
Léo Gaspard
Florian Klink
Andrew Dunham
Christian Kauhaus
Peter Hoeg
Dan Peebles
Markus Kowalewski
Michael Fellinger
Till Höppner
Uli Baum
Tuomas Tynkkynen
Susan Potter
R. RyanTM
Francesco Gazzetta
Cray Elliott
Hoàng Minh Thắng
Lluís Batlle i Rossell
Eric Litak
Alexey Lebedeff
Matthew Bauer
Philipp Gesang
Mitsuhiro Nakamura
sander
Andy Dirnberger
Ryan Mulligan
Roosembert Palacios
Daniel Goertzen
Eric Bailey
Stewart Mackenzie
tilpner
Justin Wood
Samuel Leathers
Benjamin Hipple
Michael Alan Dorman
Shea Levy
lewo
Vincent Laporte
Alastair Pharo
Yucheng Zhang
Jonathan C. Otsuka
Moritz Ulrich
John Ericson
Will Dietz
rardiol
Josef Kemetmüller
Justin Wood
Max Zerzouri
adisbladis
Profpatsch
Alexander V. Nikolaev
Michael Fellinger
Joachim F
Yegor Timoshenko
Itai Zukerman
Ben Gamari
Scott Brown
Alexander Oloo
Tobias Geerinckx-Rice
Ales Huzik
Shea Levy
Andreas Rammhold
Patrick Hilhorst
Gabriel Ebner
John Boehr
aszlig
Christian Kjær
Markus Kohlhase
Keshav Kini
mimadrid
Evan Wallace
Jon Banafato
Gleb Peregud
Rickard Nilsson
Tim Steinbach
Yegor Timoshenko
Stefan Siegl
Nikolay Amiantov
Eelco Dolstra
Maximilian Güntner
Peter Simons
Svintsov Dmitry
Andrey Pavlov
Kirill Radzikhovskyy
Vincent Laporte
