118 lines
3.7 KiB
Plaintext
118 lines
3.7 KiB
Plaintext
Inpho on Automatic Line Testers
|
||
Typed By RiPMaX/LIBERTY
|
||
|
||
DOC NO: [2/4]
|
||
|
||
AUTOMATICE LINE TESTERS - S.A.L.T.
|
||
|
||
GENERAL
|
||
-------
|
||
|
||
The S.A.L.T. (Subscriber Automatic Line Tester) is installed in exchanges to
|
||
provide automatic testing facilities for telephones and line conditions on
|
||
exchange services.
|
||
After clearing the fault it is neccessary to test the complete telephone
|
||
service including the insulation resistance on the line to earth and between
|
||
the pair, the bell and dial operation.
|
||
Access to the S.A.L.T. testing equipment is obtained by dialing the special
|
||
number allotted to the particualr exchange. It is only neccessary to obtain
|
||
access to the S.A.L.T. tester once. All subsequent tests may be made by
|
||
dialing the code digit for that test. The following tests may be preformed in
|
||
any order or independantly of each other without the need to release the
|
||
tester.
|
||
|
||
TO OBTAIN ACCESS TO S.A.L.T. TESTER
|
||
-----------------------------------
|
||
|
||
Dial the access code number for the particular exchange.
|
||
|
||
* If the tester is free ring tone will be heard.
|
||
* If no tone is heard wait for busy tone, hang up and try again.
|
||
* If the tester becomes free while waiting, ring tone will be heard.
|
||
|
||
Hang up and wait for telephone bell to ring ( About 4 seconds ).
|
||
|
||
Lift receiver on ring back. If dial tone is heard the circuit is ready for
|
||
testing to proceed.
|
||
|
||
The S.A.L.T. is released when the handset is replaced after a test.
|
||
|
||
INSULATION RESISTANCE TESTS A> A TO B B> A AND B TO EARTH
|
||
-----------------------------------------------------------
|
||
|
||
This is a combination test which tests both the insulation resistance between
|
||
the pair and the insulation resisitance to earth.
|
||
|
||
Dial 5 and listen for ring tone.
|
||
Hang up and wait for telephone bell to ring.
|
||
Lift receiver on ring back.
|
||
Listen to tone :
|
||
|
||
* 900 Hz = Line OK (I * R Over 1Mê)
|
||
* Busy Tone = Line Faulty (I * R between 0.5Mê and 1Mê)
|
||
* NU Tone = Line Faulty (I * R below 0.5Mê)
|
||
|
||
If the service fails this test, use code digits 6 and/or 7 to isolate the
|
||
problem.
|
||
|
||
INSULATION RESISTANCE, A TO EARTH AND B TO EARTH
|
||
------------------------------------------------
|
||
|
||
Dial 6 and LIsten for ring tone.
|
||
Continue as for Insulation resistance tests. (Code digit 5)
|
||
|
||
INSULATION RESISTANCE, A TO B
|
||
-----------------------------
|
||
|
||
Dial 7 and LIsten for ring tone.
|
||
Continue as for Insulation resistance tests. (Code digit 5)
|
||
|
||
LINE LOOP RESISTANCE TEST
|
||
-------------------------
|
||
|
||
Dial 8.
|
||
Listen to tone :
|
||
|
||
* 900 Hz = Line OK
|
||
* Busy Tone = Loop resistance too high
|
||
* NU Tone = Loop resistance 200ê or less.
|
||
|
||
DIAL TEST
|
||
---------
|
||
|
||
Dial 1 and listen for ring tone, then dial "0".
|
||
Listen to tone :
|
||
|
||
* 0.5 seconds 900 Hz tone then ring tone = Dial OK.
|
||
* NU Tone = Pulse Faulty (Replace)
|
||
|
||
BELL TEST (FULL VOLTAGE)
|
||
------------------------
|
||
|
||
Dial 4 and Listen for ring tone.
|
||
Hang up and ring back in 4 to 5 seconds.
|
||
Lift receiver to trip ring.
|
||
|
||
BELL TEST (HALF VOLTAGE)
|
||
------------------------
|
||
|
||
Dial 4 and Listen for ring tone.
|
||
Continue as for full voltage test.
|
||
|
||
TEST CONTROL FOR S.A.L.T.
|
||
|
||
Dial 9 and listen for dial tone, which indicates that the testing equipment is
|
||
functioning correctly. This test may be done at anytime time after access to
|
||
the S.A.L.T. has been obtained. Hang up to release the testing equipment.
|
||
|
||
*******************************************************************************
|
||
THIS PHILE WAS DOWNLOADED FROM
|
||
|
||
/\/\ L I B E R T Y W O R L D H E A D - Q U A R T E R S /\/\
|
||
|
||
+ 61 9 447 6588
|
||
|
||
LIBERTY - A FUTURE NOT OF DREAMS BUT REALITY!
|
||
|
||
***********************************EOF*****************************************
|
||
|