b18c7b5891
linux-3.8: upgrade to 3.8.10
2013-04-30 09:27:02 +02:00
008bb6935c
update kernels 3.0, 3.2, 3.4, 3.8 and 3.9-rc
2013-04-26 09:12:35 +02:00
61b65080d9
linux-3.0: upgrade to 3.0.74
2013-04-19 14:53:00 +02:00
384de84023
linux-3.4: upgrade to 3.4.41
2013-04-19 14:53:00 +02:00
181fb52b14
Update Linux 3.8
2013-04-18 19:22:54 +04:00
873fa411b0
Update Linux 3.9rc
2013-04-18 19:22:54 +04:00
56afb97e87
linux-3.8: upgrade to 3.8.7
2013-04-14 00:35:39 +02:00
e20d9d0a97
linux-3.4: upgrade to 3.4.40
2013-04-14 00:35:39 +02:00
407f07e7e6
linux-3.0: upgrade to 3.0.73
2013-04-14 00:35:39 +02:00
7ab70b3a41
linux-3.2: upgrade to 3.2.43
2013-04-12 11:40:33 +02:00
a99ea7a0ee
linux-3.0: update to 3.0.72
2013-04-06 20:45:30 +02:00
4eff34e602
linux-3.4: upgrade to 3.4.39
2013-04-06 20:45:29 +02:00
8092bc2dd7
linux-3.8: upgrade to 3.8.6
2013-04-06 20:39:36 +02:00
4154fbfabd
linux-3.9: upgrade to 3.9-rc4
2013-04-04 22:18:07 +02:00
6ef9c6b1fc
linux-3.8: upgrade to 3.8.5
2013-04-04 22:18:07 +02:00
d0c6308da7
linux-3.4: upgrade to 3.4.38
2013-04-04 22:18:07 +02:00
37de48e43d
linux-3.0: upgrade to 3.0.71
2013-04-04 22:18:06 +02:00
bee99995d9
linux: update to 3.8.5
2013-03-31 09:27:40 +02:00
df92d96871
linux: Update to 3.2.42
2013-03-28 13:10:38 +01:00
f0d45e2e25
Linux kernel: Enable CONFIG_FHANDLE
...
This enables the open_by_handle_at(2) and name_to_handle_at(2)
syscalls. Systemd kind of requires this.
2013-03-27 23:00:02 +01:00
916c1adb84
Delete all kernels older than 2.6.39
...
Systemd doesn't support those kernels, so there is no point in keeping
them around.
2013-03-27 23:00:02 +01:00
4fa4ab3a6e
Partially revert my recent kernelPackages changes
...
First, pass in `self' again so that overriding works properly (thanks
for pointing that out, @edolstra)
Second, instead of having linuxPackages*.kernel mean something different
inside the set and out, add a new attribute linuxPackages*.kernelDev,
which for the generic kernel is simply linuxPackages*.kernel but for the
manual-config kernel is the `dev' output (which has the build tree,
source tree, etc.)
The second change required trivial modifications in a bunch of
expressions, I verified that all of the linuxPackages* sets defined in
all-packages.nix have the same drv paths before and after the change.
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-03-24 07:45:00 -04:00
1f43786616
linux-3.0: upgrade to 3.0.70
2013-03-22 00:00:05 +01:00
7560812cfa
linux-3.2: upgrade to 3.2.41
2013-03-22 00:00:05 +01:00
b7bb81bc1f
linux-3.4: upgrade to 3.4.37
2013-03-22 00:00:05 +01:00
42d29c2afb
linux-3.8: upgrade to 3.8.4
2013-03-22 00:00:04 +01:00
2d2123b8d7
Update Linux 3.9-rc to rc3
2013-03-19 13:34:57 +04:00
6922ec9258
Linux-3.9-rc2
2013-03-16 16:27:19 +04:00
b5b4a4a5cf
Linux 3.8: update to 3.8.3
2013-03-16 10:51:03 +04:00
262c21ed46
Enable __ignoreNulls globally
2013-03-07 19:42:01 +01:00
f5052a8679
Fix extraBuildNativeInputs reference
2013-03-07 19:41:40 +01:00
674c51af3c
Merge remote-tracking branch 'origin/master' into stdenv-updates
2013-03-07 19:33:52 +01:00
3d28751740
Linux 3.9-rc1: set correct modDirVersion
2013-03-07 09:12:49 +04:00
b72134dc11
Linux: Add 3.9-rc1 as lowPrio (it has a regression fix 3.8.2 lacks)
2013-03-06 23:59:49 +04:00
060ba43e8f
linux-3.8: upgrade to 3.8.2
2013-03-04 22:40:33 +01:00
c7c6592f6f
linux-3.7: upgrade to 3.7.10
2013-03-04 22:40:23 +01:00
01c5d2d702
linux-3.4: upgrade to 3.4.35
2013-03-04 22:40:23 +01:00
04e883e496
linux-3.0: upgrade to 3.0.68
2013-03-04 22:40:22 +01:00
3b5b1be3cf
Linux 3.8.1
2013-03-02 20:16:08 +04:00
0bdd926a32
linux/manual-config: put build and source trees into a separate 'dev' output.
...
This makes it possible to still build out-of-tree modules without making a system using this kernel depend on the full source and build tree at runtime.
Note that references to the source tree are removed from kernel modules after build.
Ideally, this would be accomplished by modifying the Makefile that puts the reference there in the first place, but I haven't tracked that down yet.
2013-03-02 09:54:08 -05:00
b90b62e33b
linux/manual-config: Move configfile symlinking to configurePhase.
...
It makes more semantic sense there than in unpackPhase, as that symlink is _how_ we configure the kernel
2013-03-02 07:55:07 -05:00
8ce1295ad3
linux/manual-config: ignore nulls.
...
There's no need to set the postFixup env var at all if we're not modular.
2013-03-02 07:51:12 -05:00
26af997d41
Merge branch 'master' into stdenv-updates
...
Conflicts (simple):
pkgs/applications/networking/browsers/chromium/default.nix
pkgs/development/libraries/libsoup/default.nix
pkgs/os-specific/linux/kernel/manual-config.nix
pkgs/os-specific/linux/qemu-kvm/default.nix
2013-03-02 10:41:53 +01:00
94fe64b3eb
manual-kernel: Add bc to buildNativeInputs.
...
As timeconst.pl was replaced by a bc script in the merge window for kernel 3.9,
we also need bc during build time, for more information about the reasons,
please have a look at the following commit:
torvalds/linux@70730bca13
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2013-02-28 18:57:03 +01:00
bf8f39ff9b
linux: Update to 3.2.39
...
CVE-2013-0228
2013-02-27 14:47:40 +01:00
5f32207dfc
Merge remote-tracking branch 'origin/master' into stdenv-updates.
2013-02-24 19:27:08 +01:00
17d289498f
linux: Typo: CFG80211_WEXT
2013-02-24 12:07:14 +01:00
0961084afb
linux 3.7, 3.8: Enabling CFG80211_WEXT (for ipw2200)
...
My computer with a ipw2200 nic needs that, to have the
ipw2200 driver.
2013-02-23 15:40:20 +01:00
afe3758b1b
Remove myself from kernel maintainers.
...
I use manual config now.
2013-02-21 12:39:25 -05:00
acd4299e75
Merge branch 'master' into stdenv-updates
...
Conflicts:
pkgs/applications/networking/browsers/chromium/default.nix
pkgs/top-level/all-packages.nix
Merge conflicts seemed trivial, but a look from viric and aszlig would be nice.
2013-02-21 11:13:30 -05:00
059c30bf9d
add kernel 3.8
2013-02-21 08:53:16 +01:00
aacca1902c
Merge branch 'upstream-master' into stdenv-updates
2013-02-19 10:09:39 -05:00
a4d5e4a9e2
Linux 3.7.9
2013-02-18 11:35:22 -05:00
0e4c3a1fc9
Linux 3.4.32
2013-02-18 11:34:42 -05:00
f4a51bbdd6
Linux 3.0.65
2013-02-18 11:34:19 -05:00
2aa6f262cb
Merge remote-tracking branch 'origin/master' into stdenv-updates
2013-02-15 13:36:34 +01:00
af26af6fc7
Remove EOL'd Linux 3.6
2013-02-14 14:33:42 -05:00
0ad870eb5e
Remove EOL'd Linux 3.5
2013-02-14 14:32:44 -05:00
c23084906b
Remove EOL'd Linux 3.3
2013-02-14 14:30:31 -05:00
0178a3b7b1
Remove EOL'd Linux 3.1
2013-02-14 14:28:53 -05:00
ca59489e2b
Linux 3.7.8
2013-02-14 14:25:19 -05:00
e531913aca
Linux 3.4.31
2013-02-14 14:25:11 -05:00
2d23eb3a19
Linux 3.0.64
2013-02-14 14:24:57 -05:00
00251af191
SUNRPC_DEBUG doesn't work on linux 3.3
...
It's as if the option isn't there.
http://hydra.nixos.org/build/4015233
2013-02-14 20:08:08 +01:00
3a8631201e
Linux 3.4.30
2013-02-11 12:57:40 -05:00
45e877f706
Linux 3.0.63
2013-02-11 12:53:43 -05:00
170b0c9e2e
Linux 3.7.7
2013-02-11 12:34:14 -05:00
76a5e89a1c
linux: Update to 3.2.38
2013-02-11 15:34:30 +01:00
c4216ed1a0
linux kernel: enabling SUNRPC_DEBUG
...
Much easier debugging of nfs issues.
If I understand correctly, it was enabled in 3.2 and below; I enable it for
next kernels.
2013-02-07 16:21:03 +01:00
5336c82882
Linux 3.7.6
2013-02-04 06:58:19 -05:00
249b3ea5ef
Linux 3.4.29
2013-02-04 06:58:07 -05:00
c32435381e
Linux 3.0.62
2013-02-04 06:57:46 -05:00
45de66b2b1
Update the raspberry pi kernel to one newer.
2013-01-29 20:17:32 +01:00
97c5ab3a6d
linux-2.6.32-xen: Remove
...
Hasn't built in a long time and is obsolete anyway.
2013-01-29 12:43:53 +01:00
2afdaf0e82
Linux 3.7.5
2013-01-28 00:12:35 -05:00
4bf80b462d
Linux 3.4.28
2013-01-28 00:12:24 -05:00
39fa2f72ab
Merge pull request #253 from rickynils/fscache
...
linux 3.2-3.7: enable NFS_FSCACHE and CIFS_FSCACHE
2013-01-27 12:39:25 -08:00
1886d1db6a
Merge remote-tracking branch 'upstream/master' into stdenv-updates
2013-01-20 16:53:21 +01:00
d54c8c4b83
update kernels: 3.0.59, 3.4.26 and 3.7.3
2013-01-18 08:31:25 +01:00
8faee15126
linux: Update to 3.2.37
2013-01-17 17:21:31 +01:00
5bb548d2e4
Merge remote-tracking branch 'origin/master' into stdenv-updates
2013-01-17 14:19:14 +01:00
2d56a2cc15
linux-3.7: upgrade to 3.7.2
2013-01-13 14:30:55 +01:00
91d4d56703
linux-3.4: upgrade to 3.4.25
2013-01-13 14:30:55 +01:00
cf546347e5
linux-3.0: upgrade to 3.0.58
2013-01-13 14:30:55 +01:00
97d6292deb
linux 3.2-3.7: enable NFS_FSCACHE and CIFS_FSCACHE
...
NFS_FSCACHE and CIFS_FSCACHE are required to enable the local cache support for
NFS and CIFS (the 'fsc' mount option). The reasoning for enabling it from 3.2
and forward is that at least Ubuntu 12.04 (linux 3.2) has it turned on. Could
probably be enabled for earlier kernels too.
2013-01-09 18:14:54 +01:00
9e9cd7b529
Merge branch 'master' into stdenv-updates.
2013-01-04 21:00:53 +01:00
99897218f4
linux: Update to 3.2.36
2013-01-04 14:19:00 +01:00
67aa9243f0
Merge branch 'stdenv-updates' into pi-stdenv-updates
...
Conflicts:
pkgs/development/compilers/gcc/4.7/default.nix
Trivial.
2012-12-28 23:30:53 +01:00
b58780c43d
Merge remote-tracking branch 'eelco/master' into stdenv-updates
...
Conflicts:
pkgs/development/compilers/gcc/4.7/default.nix
Trivial solution.
2012-12-28 23:28:16 +01:00
719ba63004
Merge branch 'stdenv-updates' into pi-stdenv-updates
...
Conflicts:
pkgs/development/compilers/gcc/4.6/default.nix
pkgs/development/compilers/gcc/4.7/default.nix
The 4.7 had some weird parameters added in crossAttrs; I've removed
them, but I don't understand where they come from.
2012-12-28 20:14:01 +00:00
ab3eeabfed
Rename buildNativeInputs -> nativeBuildInputs
...
Likewise for propagatedBuildNativeInputs, etc. "buildNativeInputs"
sounds like an imperative rather than a noun phrase.
2012-12-28 19:20:09 +01:00
5be0a9acd7
Rename hostDrv -> crossDrv, buildDrv -> nativeDrv
...
This is for consistency with terminology in stdenv (and the terms
"hostDrv" and "buildDrv" are not very intuitive, even if they're
consistent with GNU terminology).
2012-12-28 19:08:19 +01:00
ab2520c383
Adding linux-3.6-rpi
...
I picked the change from
7b4d69eeff
2012-12-27 21:29:56 +00:00
9247552a91
Linux 3.7.1
2012-12-17 17:45:01 -05:00
baa5ebfbdf
Linux 3.0.57
2012-12-17 17:43:02 -05:00
55196223c7
Linux 3.4.24
2012-12-17 17:42:38 -05:00
cc12516cf0
Linux 3.6.11
2012-12-17 17:33:44 -05:00
faf821e501
Adding USB cameras to linux 3.7
...
Details changed since the 3.6 config to get this enabled.
2012-12-17 11:52:47 +01:00
639edcb829
manual-kernel: Fix handling spaces in readConfig.
...
The previos version did a for loop over the output of set, which spits out _all_
defined variables and their contents. This not only is dangerous if there is a
variable starting with CONFIG_ but also can't handle whitespace, as the IFS is
set to any (horizontal _and_ vertical) whitespace by default.
So, imagine (actually don't imagine, something like this is the case in a lot of
kernel configuration files) you have the following variable:
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi ..."
A loop with for and the default IFS would result in the following variable
pieces:
0: CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi
1: -fcall-saved-rsi
2: ..."
This obviously leads to the problem that this config variable is being cut off
at the first whitespace.
Another downside of this approach is that set not only returns variables but
functions as well. This could lead to quite a lot of unexpected behaviour and
confusion.
So the new approach doesn't source the kernel configuration anymore but uses
`read` to parse the file line-by line, setting IFS to '=', thus splitting all
configuration lines into key/value pairs.
Using parameter expansion, we ensure that we only read lines starting with
"CONFIG_". This particularily has the advantage of not being bash-specific,
should we choose to change to a different default shell someday.
Now, after we got a correct "CONFIG_" line, we're using a temporary variable to
split off the first quote from the result. Particularily the reason behind this
is shell compatibility again, as ${${foo#"}%"} only works in Bash, Zsh and
whatnot but not in plain SH.
And within the next line we obviously insert the no_firstquote variable without
it's last quote removed.
But, what about escaping?
First of all, if we'd just eval the $val variable, we would correctly unescape
the value, but this has the downside that variables within the content would be
expanded, for example look at this:
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
Well, obviously this is a bad example at the Nix sense, but just to show that
variables within kernel configuration entries aren't impossible.
And second, which would have been a show stopper if \" would be within $val: It
simply would end up being an invalid Nix expression, because \" would end up as
a ploin " within a double quoted string.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-12-13 22:54:57 +01:00
caf561d41a
aufs3: upgrade to 1210 release, add linux-3.7 support
2012-12-13 14:00:28 +01:00
9ddd1cc78b
Linux 3.7
...
Kernel configuration succeeds, I'll let hydra test the build
2012-12-11 11:57:04 -05:00
ce5ba30f64
Linux 3.6.10
2012-12-10 19:26:36 -05:00
ed994dcbe2
Linux 3.4.23
2012-12-10 19:26:20 -05:00
81a856c878
Linux 3.0.56
2012-12-10 19:25:00 -05:00
88ca46bfa0
linux: Update to 3.2
2012-12-07 13:24:40 +01:00
fe070086fb
linux-3.6: upgrade to 3.6.9
2012-12-04 12:02:36 +01:00
38740214cb
linux-3.4: upgrade to 3.4.21
2012-12-04 12:02:36 +01:00
47362f67ea
linux-3.0: upgrade to 3.0.54
2012-12-04 12:02:36 +01:00
9b0879bf85
Linux 3.6.8
2012-11-26 15:42:07 -05:00
d4d1100123
Linux 3.4.20
2012-11-26 15:41:55 -05:00
1180478089
Linux 3.0.53
2012-11-26 15:37:06 -05:00
3ee85e3a8d
linux-3.6: upgrade to 3.6.7
2012-11-18 11:13:04 +01:00
6a46699855
linux-3.4: upgrade to 3.4.19
2012-11-18 11:13:04 +01:00
0404c409cc
linux-3.2: upgrade to 3.2.34
2012-11-18 11:13:04 +01:00
d45b239dcc
linux-3.0: upgrade to 3.0.52
2012-11-18 11:13:03 +01:00
f215bda5b4
linux-2.6.32: upgrade to 2.6.32.60
2012-11-18 11:13:03 +01:00
c604ff045e
add cifs_timeout to kernel 3.5
2012-11-15 07:41:11 +01:00
bb3b603ea7
mips linux: Adding a patch to fix an ext3 bug in 3.5 and 3.6
...
I made it apply to all Mips, although the bug works only for n32 and o32 ABIs.
We don't support any n64 by now.
2012-11-06 00:16:13 +01:00
b56a899320
linux-3.6: upgrade to 3.6.6, contains fix for recent ext4 corruption
2012-11-05 21:11:21 +01:00
97c5b93402
linux-3.4: kernel 3.4.18, contains fix for recent ext4 corruption
2012-11-05 21:11:21 +01:00
a1c54023ce
linux-3.0: upgrade to 3.0.51
2012-11-05 21:11:20 +01:00
1d384b0fe0
linux: Update to 3.2.33
2012-10-31 13:48:04 +01:00
9f221073c2
Linux 3.6.4
2012-10-28 22:13:59 -04:00
1da5d34957
Linux 3.4.16
2012-10-28 22:09:25 -04:00
d843ec6b28
Linux 3.0.49
2012-10-28 22:05:33 -04:00
125f6a02a4
Linux 3.6.3
2012-10-21 22:40:13 -04:00
e71103deef
Linux 3.4.15
2012-10-21 22:38:53 -04:00
c01c02a74b
Linux 3.0.47
2012-10-21 22:36:33 -04:00
76c010b928
linux: Update to 3.2.32
2012-10-18 12:22:17 -04:00
fb62b5fb91
linux-3.0: upgrade to 3.0.46
2012-10-13 12:22:48 +02:00
444b136eee
linux-3.4: upgrade to 3.4.14
2012-10-13 12:22:47 +02:00
86693f1c5c
linux-3.5: upgrade to 3.5.7
2012-10-13 12:22:47 +02:00
12ad270d2a
linux-3.6: upgrade to 3.6.2
2012-10-13 12:22:47 +02:00
5711282fd8
linux kernels: mark kernels that can disable the conntrack-helper
2012-10-13 12:22:47 +02:00
8ea8105071
linux kernels: mark kernels with rpfilter support
2012-10-13 12:22:47 +02:00
ebd2b0e1ab
linux: Update to 3.2.31
2012-10-10 21:51:36 -04:00
8f480e3035
linux-3.6: upgrade to 3.6.1
...
- enable aufs3 patch
- check other patches needing upgrade/enable
2012-10-09 16:05:24 +02:00
2f39ec92e3
linux-3.5: upgrade to 3.5.6
2012-10-09 16:05:23 +02:00
76aa428ac6
linux-3.4: upgrade to 3.4.13
2012-10-09 16:05:23 +02:00
332c6de736
linux-3.0: upgrade to 3.0.45
2012-10-09 16:05:23 +02:00
396de23762
Enable V4L2 modules
2012-10-04 15:35:21 +04:00
359355e150
Linux 3.6
2012-10-01 07:01:31 -04:00
22e050f8c6
linux: In case of an ARM kernel build, add extra include directories
...
They are required in order to build some modules, like that of
cryptodev.
2012-09-23 19:59:37 +02:00
0874615fcc
Remove User Mode Linux
...
It hasn't built in a long time and it's obsolete IMHO.
2012-09-21 13:32:37 -04:00
50aac3247a
linux: Update to 3.2.30
2012-09-21 13:30:00 -04:00
ce3e42df72
linux aufs3: upgrade patch and utils to 20120827 for all 3.x kernels
2012-09-16 13:05:52 +02:00
7b92af45f8
linux-3.4: upgrade to 3.4.11
2012-09-16 13:05:52 +02:00
c9b24ba210
linux-3.0: upgrade to 3.0.43
2012-09-16 13:05:52 +02:00
95fa07e183
linux-3.5: Updating to 3.5.4
2012-09-15 21:57:05 +02:00
080c0a5c20
linux: Update to 3.2.29
2012-09-13 10:10:26 -04:00
d37b642769
newer kernels need cifs-utils to mount CIFS filesystems
...
the kernel itself (and busybox's cifs mount code) are no longer able
to do this in some/most cases and will error out saying:
"CIFS VFS: connecting to DFS root not implemented yet""
Nixos' qemu-vm target is hurt by this, as it wants to mount /nix/store
via cifs very early in the boot process.
this commit just marks the problematic kernels.
An associated commit in nixos will use this info to fix the problem.
2012-08-30 18:25:49 +02:00
6fabe047c6
linux-3.4: upgrade to 3.4.10
2012-08-30 18:25:49 +02:00
8f1a34e228
linux-3.5: upgrade to 3.5.3
2012-08-30 18:25:49 +02:00
192b29181b
linux-3.4: upgrade to 3.4.9
...
- aufs patch: upgrade to latest stable 3.4
2012-08-21 10:27:13 +02:00
6e9a6a5924
linux-3.3: upgrade to 3.3.8
...
- aufs patch: upgrade to latest stable 3.3
2012-08-21 10:26:44 +02:00
e91a4fb1e4
linux: Update to 3.2.28
2012-08-20 09:56:39 -04:00
03228d60fe
linux-3.5: upgrade aufs3 patch to latest stable
2012-08-16 12:00:25 +02:00
05ed13dc49
linux-3.5: upgrade to 3.5.2
2012-08-16 12:00:04 +02:00
839c58f5b1
linux/manual-config: Cleanup
2012-08-11 21:21:06 -04:00
9ac776ab22
linux/manual-config.nix: Set sourceRoot directly to the pre-unpacked source rather than using a symlink
2012-08-11 21:07:37 -04:00
0c18551c93
linux/manual-config: Do source unpacking/patching in a separate derivation.
...
Since we keep the source in the kernel build anyway, no space is wasted by having a separate store path for the unpacked source. The upside is that the same source can be used to build the kernel multiple times, or generate configurations for later kernel builds, without going through the (fairly long) unpack and patch process multiple times.
2012-08-11 21:02:30 -04:00
e69a6c57bc
linux: Update to 3.2.27
2012-08-10 18:54:10 -04:00
691d069af9
perf: make it take the linux patches
...
Otherwise the previous patch I added does not get used for perf.
2012-08-10 10:03:53 +02:00
734bb84f09
linux-3.5: fix perf build with a patch from the perf mailing list
2012-08-10 09:41:43 +02:00
cbb2c3abf2
linux-3.5: upgrade to 3.5.1
2012-08-10 08:27:09 +02:00
21a200d6b2
linux/manual-config: Fix depmod step, remove false comment
2012-08-07 06:36:50 -04:00
d6cc420fd7
linux: Update to 3.2.26
2012-08-06 09:57:21 -04:00
fb99c24d7c
kernel-3.5: add aufs3 patch
2012-08-05 01:55:31 +02:00
1935f7e5b8
linux/manual-config: Add informative comment
2012-08-03 08:33:31 -04:00
1b7264d349
linux/manual-config.nix: When stripping, use xargs -r in case CONFIG_MODULES=y but no modules are actually installed
2012-08-01 23:32:02 -04:00
4aba2bb3f5
linux/manual-config: Use kernelPatches like generic.nix, not a plain patches list
2012-08-01 23:02:17 -04:00
fd330e9315
linux/manual-config: Install the kernel with the name given in stdenv.platform.kernelTarget
2012-08-01 15:39:49 -04:00
ad49d92899
linux/manual-config: When installing firmware, create the firmware directory prior to make *_install.
...
It is probably a kernel build system bug that this is necessary, but it's not really a big deal either.
2012-08-01 11:56:12 -04:00
3f4fd55c63
linux/manual-config: Remove unnecessary quotation
2012-08-01 11:26:30 -04:00
443b9bc936
linux/kernel/manual-config: use isDisabled instead of isNo in case FIRMWARE_IN_KERNEL is left unspecified
2012-08-01 11:21:32 -04:00
3dbfca0d7f
linux/manual-config: Change from 'features' to 'config' and fix build when firmware is installed.
...
Instead of manually adding which 'features' a kernel has based on its config here, just generate a nixexpr representation of the whole config and let places that need it (e.g. NixOS modules) decide how to map config options to features.
Note that if your kernel requires firmware whose hex file sits directly in ${src}/firmware rather than in a subdirectory thereof, you may need this patch for now: https://lkml.org/lkml/2012/7/31/724
2012-08-01 06:18:03 -04:00
b5d4e8a17a
linux-3.4: upgrade to 3.4.7
2012-07-31 10:26:18 +02:00
da4c64026a
linux/kernel/manual-config: Greatly simplify config parser
2012-07-29 15:54:31 -04:00
298b5ccdab
linux/kernel/manual-config: Only import from derivation when explicitly asked to
2012-07-29 13:26:39 -04:00
f0694a3151
linux/kernel/manual-config: Do all of the config file parsing in the imported-from derivation
2012-07-29 13:24:05 -04:00
6585646d41
linux/kernel/manual-config: Add meta
2012-07-29 04:59:38 -04:00
46fa5ab105
linux/kernel/manual-config: Relink the symlink from the build directory to the source directory after the source directory is moved
2012-07-29 04:56:56 -04:00
f7b6f01da1
linux/kernel/manual-config: Cleanup
2012-07-29 04:52:34 -04:00
98341e0bda
linux/kernel/manual-config: Use the kernel's make install
2012-07-29 04:48:50 -04:00
a9a7085684
linux/kernel/manual-config: Allow manually specifying features, cleanup
2012-07-29 04:31:40 -04:00
6bb20c7ba2
linux/kernel/manual-config: Strip modules after install
2012-07-29 04:23:28 -04:00
6b18ab5365
linux/kernel/manual-config: Remove useless INSTALL_MOD_STRIP variable
2012-07-29 04:07:43 -04:00
6e3b17feec
linux/kernel/manual-config: Run depmod after build
2012-07-29 04:01:40 -04:00
48b5e8eee7
linux/kernel/manual-config: Build in a separate directory and move the build and source trees into $out
2012-07-29 03:49:52 -04:00
e42a6c5f46
linux/kernel/manual-config: Move the build directory to $out instead of symlinking it
2012-07-29 03:27:09 -04:00
a36456ca25
linux/kernel-manual-config: Simplify the lines.nix runCommand now that I know how to escape properly
2012-07-29 03:09:44 -04:00
5a9d9f4f45
linux/kernel/manual-config: Properly escape makeFlagsArray and installFlagsArray
2012-07-29 02:57:58 -04:00
471b4bc9bb
MODLIB needs to be passed directly to make
2012-07-29 02:49:31 -04:00
aa40e0ff59
linux/kernel/manual-config: The default 'make install' tries to do something with LILO, so install the kernel manually
2012-07-29 01:57:59 -04:00
dfa750732d
linux/kernel/manual-config: Properly set env vars referencing $out
2012-07-29 01:34:27 -04:00
ff728a6365
The kernel build needs hostname and perl
2012-07-29 01:29:56 -04:00
bf7467cbb1
Add first attempt at linux/kernel/manual-config.
...
The goal of this function is to make it possible to build a kernel with a user provided .config.
As a secondary goal, it will extract NixOS-relevant features from the config automatically.
As a tertiary goal, the build will aim to be simpler than the current generic kernel builder.sh.
Unfortunately, that simplicity is offset by the complexity of the feature extraction, especially since nix segfaults when trying to split the file into lines (so an import from a derivation is used)
2012-07-29 01:23:51 -04:00
1b0abce6de
linux: Update to 3.2.24
2012-07-26 11:32:53 -04:00
8c9bef04a6
linux-3.5: Enable XEN_DOM0 support
2012-07-24 02:26:04 +00:00
053f641d16
Add linux-3.5
2012-07-22 11:33:00 -04:00
f3b43a268d
linux-3.4: update to 3.4.6
2012-07-20 13:37:46 +02:00
d04cbc85cf
linux-3.4: Update to 3.4.5
2012-07-16 20:26:27 -04:00
dc5ba23ab4
linux: Update to 3.2.23
2012-07-14 17:41:52 -04:00
6bf409999f
linux-3.4: Add the improved transaction scheduler for USB 2.0
...
This is needed for new Apple trackpads
2012-07-14 12:17:28 -04:00
685acc6ef8
Linux 3.4: Enable options to make b43 work with bcm4331
2012-07-13 22:48:43 -04:00
0b07259865
linux: Update to 3.2.22
2012-07-10 09:18:12 -04:00
82b2588e35
Linux no-xsave.patch: commit patch into Nixpkgs since fetchurl no longer works
...
Patch submitted by Jan Malakhovski <oxij@oxij.org>.
2012-07-02 16:53:53 +02:00
876ff45fd5
linux perf: Allowing perf to build with its gtk interface.
...
Disabled by default, it can be enabled using overrides.
2012-06-27 22:23:15 +02:00
f97a277efc
linux kernel: 3.4.2 -> 3.4.4
2012-06-24 10:03:09 +02:00
023e8f2fb9
* Linux 3.2.21.
...
svn path=/nixpkgs/trunk/; revision=34570
2012-06-20 12:42:56 +00:00
6551b822af
* Enable devtmpfs since recent udev (systemd) versions need it.
...
svn path=/nixpkgs/trunk/; revision=34565
2012-06-19 19:10:54 +00:00
1582276602
* Drop some old obsolete kernels and unused patches.
...
svn path=/nixpkgs/trunk/; revision=34558
2012-06-19 15:56:17 +00:00
cf6db2bbac
* "powermanagement" is not a word.
...
svn path=/nixpkgs/trunk/; revision=34557
2012-06-19 15:01:49 +00:00
a5c2318d08
Fixing the mips patch for sigill fpu cases.
...
svn path=/nixpkgs/trunk/; revision=34527
2012-06-16 15:37:04 +00:00
3874e5812d
Adding two kernel patches for mips, that make the life easier on loongson2f
...
(less sigill, less sigbus). Related to bad handling of FPU instructions.
I apply them only to linux 3.4, although I think they can apply to many older kernels too.
svn path=/nixpkgs/trunk/; revision=34522
2012-06-16 10:49:03 +00:00
4cfe058218
* Linux 3.2.20.
...
svn path=/nixpkgs/trunk/; revision=34486
2012-06-12 22:27:55 +00:00
3d4ab75229
linux kernel headers: copy generated headers as well
...
as they are referenced from other kernel headers, this seems like the
best thing to do. Ubuntu seems to do so too.
Fixes issues with nvidia's binary driver and bbswitch on kernels > 3.3
svn path=/nixpkgs/trunk/; revision=34469
2012-06-11 17:41:11 +00:00
46beccef20
linux kernel aufs (needed for livecd): added to 3.4
...
upgraded 3.3 version to stable
svn path=/nixpkgs/trunk/; revision=34468
2012-06-11 17:41:05 +00:00
1697485678
Updating linux 3.4.1 to 3.4.2
...
svn path=/nixpkgs/trunk/; revision=34423
2012-06-10 15:24:28 +00:00
9ebd661fb8
Updating linux 3.4 to 3.4.1
...
svn path=/nixpkgs/trunk/; revision=34411
2012-06-09 20:25:48 +00:00
dd6ab8d7bf
* Linux 3.2.19.
...
svn path=/nixpkgs/trunk/; revision=34382
2012-06-08 13:11:38 +00:00
8805bf1ba5
'perf' wants flex and bison, since linux 3.4.
...
svn path=/nixpkgs/trunk/; revision=34210
2012-05-22 17:32:23 +00:00
5c393a469b
Adding linux 3.4.
...
svn path=/nixpkgs/trunk/; revision=34209
2012-05-22 15:29:51 +00:00
690051abbc
* Linux 3.2.18.
...
svn path=/nixpkgs/trunk/; revision=34198
2012-05-21 18:14:47 +00:00
da01b6db17
* Linux 3.2.17.
...
svn path=/nixpkgs/trunk/; revision=34073
2012-05-12 19:55:39 +00:00
b64a1dac46
Linux 3.3.6
...
svn path=/nixpkgs/trunk/; revision=34070
2012-05-12 17:50:19 +00:00
196c30de9b
* Linux 3.0.31.
...
svn path=/nixpkgs/trunk/; revision=34036
2012-05-09 21:49:39 +00:00
829e78f78f
Linux 3.3.5
...
svn path=/nixpkgs/trunk/; revision=34011
2012-05-07 22:24:35 +00:00
497a4afe72
We no longer need the bootstub config patch
...
svn path=/nixpkgs/trunk/; revision=33987
2012-05-05 14:26:20 +00:00
242e54dab6
Linux 3.3.4 (not compile tested, sorry
...
svn path=/nixpkgs/trunk/; revision=33956
2012-04-30 17:31:39 +00:00
7716976345
* Linux 3.2.16.
...
svn path=/nixpkgs/trunk/; revision=33908
2012-04-24 13:54:33 +00:00
50a0b839af
Linux 3.3.3
...
This incorporates the btrfs fix, so remove that patch. Also, I will test
that this builds after committing, and fix it if it fails
svn path=/nixpkgs/trunk/; revision=33885
2012-04-23 00:12:47 +00:00
82b308bf11
Add armv7l support.
...
svn path=/nixpkgs/trunk/; revision=33798
2012-04-15 23:41:25 +00:00
73d98c07c2
* Linux 3.2.15.
...
svn path=/nixpkgs/trunk/; revision=33794
2012-04-15 16:23:08 +00:00
8ebd53f45f
Updating linux to 3.3.2
...
svn path=/nixpkgs/trunk/; revision=33779
2012-04-13 18:09:27 +00:00
b35d2c6b89
Adding a patch for linux 3.3 for btrfs regarding ENOSPC.
...
This should solve the problem I had, where I could not boot either 3.3 or 3.3.1
in my system, as I got ENOSPC all the time.
svn path=/nixpkgs/trunk/; revision=33714
2012-04-09 21:02:17 +00:00
5dfcf18801
Adding a minimal FTRACE to the 3.2 and 3.3 linux kernels, that should not
...
affect the kernel performance, but allow more tracing.
svn path=/nixpkgs/trunk/; revision=33713
2012-04-09 21:01:00 +00:00
8e160830c1
* Doh.
...
svn path=/nixpkgs/trunk/; revision=33620
2012-04-05 13:09:30 +00:00
9a1080d7ea
* Enable NUMA. On our 48-core machines this cut the duration of a
...
kernel build from 12m27s to 4m42s.
svn path=/nixpkgs/trunk/; revision=33616
2012-04-05 12:26:13 +00:00
8cd391b130
Whoops, don't need modDirVersion for 3.3.1
...
svn path=/nixpkgs/trunk/; revision=33547
2012-04-02 20:18:52 +00:00
8585f4000b
Linux 3.3.1
...
svn path=/nixpkgs/trunk/; revision=33546
2012-04-02 20:15:19 +00:00
1e8dfa4e2c
Linux 3.3 release
...
svn path=/nixpkgs/trunk/; revision=33260
2012-03-19 15:36:40 +00:00
dfcd4dd559
Add a kernel patch for the efi boot stub to read a config file when booted without arguments, and base removable media booting off of that patch
...
The patch is currently being discussed on LKML and hopefully will be included
in mainline in some form in the future. Note that booting from the livecd has
to do a lot of work before anything is output to the console, so if the drive
is still busy don't assume the boot has hanged
svn path=/nixpkgs/trunk/; revision=33235
2012-03-18 17:14:52 +00:00
a3b099d279
* Latest 3.0.x, 3.1.x and 3.2.x kernels.
...
svn path=/nixpkgs/trunk/; revision=33151
2012-03-16 12:08:41 +00:00
0845f6618c
Add an 'efiBootStub' kernel feature to be used by NixOS
...
svn path=/nixpkgs/trunk/; revision=33137
2012-03-16 02:45:47 +00:00
76832793f2
Linux 3.3-rc7
...
svn path=/nixpkgs/trunk/; revision=33007
2012-03-12 02:19:05 +00:00
38e3d7bc86
svn merge ^/nixpkgs/trunk
...
Not merged r32497 (tree conflict, glibc GNU Hurd update). Ludovic, could you
please look at this?
svn path=/nixpkgs/branches/stdenv-updates/; revision=32520
2012-02-23 20:06:21 +00:00
1ee7c4250f
linux-3.2.nix: updated to version 3.2.7
...
svn path=/nixpkgs/trunk/; revision=32517
2012-02-23 18:07:09 +00:00
9db6840814
linux kernel 3.2 : added aufs patches
...
svn path=/nixpkgs/trunk/; revision=32483
2012-02-22 20:29:18 +00:00
77a8ea6fbd
merge powertop kernel config into default kernel config
...
svn path=/nixpkgs/trunk/; revision=32472
2012-02-22 12:12:00 +00:00
0beb6c6266
* Remove some obsolete patches.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=32379
2012-02-17 23:53:49 +00:00
eae4c3afab
* Get rid of some old kernels that no longer compile.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=32378
2012-02-17 23:47:00 +00:00
acee1c4e5a
* Latest 2.6.27 and 2.6.32 kernels.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=32376
2012-02-17 22:31:37 +00:00
5144a19987
svn merge ^/nixpkgs/trunk
...
There were a few merge conflicts due to ensureDir->mkdir -p migration
svn path=/nixpkgs/branches/stdenv-updates/; revision=32174
2012-02-10 10:24:30 +00:00
f1a6497357
Linux kernel 3.2.2 -> 3.2.4.
...
svn path=/nixpkgs/trunk/; revision=32096
2012-02-07 09:13:45 +00:00
3256c40575
svn merge ^/nixpkgs/trunk
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=31878
2012-01-27 11:48:58 +00:00
c4fdb28b80
Stable kernel 3.2.2 released today.
...
svn path=/nixpkgs/trunk/; revision=31874
2012-01-26 23:25:39 +00:00
5b132f6e96
svn merge ^/nixpkgs/trunk
...
Conflicts: cups, all-packages.nix (gcc45_debug)
svn path=/nixpkgs/branches/stdenv-updates/; revision=31863
2012-01-26 15:27:03 +00:00
4a1c721c01
Changing every reference from mips64-linux to mips64el-linux. That's
...
what the new nix thinks the fuloong is.
Anyone having the old nix should use a nixpkgs previous to this change to build
the new nix. And then, with the new nix, he can use any newer nixpkgs revision.
svn path=/nixpkgs/trunk/; revision=31751
2012-01-21 00:34:51 +00:00
10394bd844
Updating linux 3.2 to 3.2.1
...
svn path=/nixpkgs/trunk/; revision=31743
2012-01-20 16:51:39 +00:00
c556a6ea46
* "ensureDir" -> "mkdir -p". "ensureDir" is a rather pointless
...
function, so obsolete it.
svn path=/nixpkgs/branches/stdenv-updates/; revision=31644
2012-01-18 20:16:00 +00:00
29e69f119d
Making perf cross-build again, now with manpages.
...
svn path=/nixpkgs/trunk/; revision=31371
2012-01-06 19:35:12 +00:00
75d5ffe7ac
Adding perf manual pages.
...
I copied the docbook inputs from awesome. I don't understand them.
svn path=/nixpkgs/trunk/; revision=31355
2012-01-06 17:45:53 +00:00
b76352800e
Adding slang to perf. It looks like it wants slang too.
...
svn path=/nixpkgs/trunk/; revision=31354
2012-01-06 17:04:32 +00:00
cae619da08
Updating elfutils/perf to cross-build. I tested this for the nanonote.
...
I add newt, checking that it cross-builds too.
I update perf to have newt support, and now it's also finding python, whatever
that means. I've not tested if 'python' as buildInputs is enough.
svn path=/nixpkgs/trunk/; revision=31353
2012-01-06 16:45:14 +00:00
4c814dd003
Adding linux 'perf' tool.
...
svn path=/nixpkgs/trunk/; revision=31319
2012-01-05 21:24:51 +00:00
da6b6a9332
Update Linux 3.2 to release
...
svn path=/nixpkgs/trunk/; revision=31306
2012-01-05 07:24:37 +00:00
95b42b8134
Updating linux to 2.6.32.52 and 3.1.7
...
svn path=/nixpkgs/trunk/; revision=31299
2012-01-04 21:34:03 +00:00
0efe938292
A newer rc
...
svn path=/nixpkgs/trunk/; revision=31081
2011-12-26 04:20:15 +00:00
435c32b5b6
A fresher Linux rc
...
svn path=/nixpkgs/trunk/; revision=31048
2011-12-23 04:26:36 +00:00
0e3d2e236e
Update Linux kernel to 3.1
...
svn path=/nixpkgs/trunk/; revision=30876
2011-12-14 07:27:58 +00:00
f3b7b7d69e
Linux 3.1.4
...
svn path=/nixpkgs/trunk/; revision=30625
2011-11-29 16:47:28 +00:00
752203c3ca
* Remove broken tux-on-ice kernels.
...
svn path=/nixpkgs/trunk/; revision=30619
2011-11-29 14:49:32 +00:00
25f6c6ca6e
* Re-enable the CFQ scheduler as a builtin module (as was the case in
...
2.6.32).
svn path=/nixpkgs/trunk/; revision=30617
2011-11-29 14:19:35 +00:00
ab017a58c5
* Enable PROC_EVENTS, since it's required by libcgroup's cgrulesengd
...
to monitor process creation.
svn path=/nixpkgs/trunk/; revision=30549
2011-11-24 17:54:55 +00:00
df05356c05
Linux 3.1.2
...
svn path=/nixpkgs/trunk/; revision=30529
2011-11-22 17:05:18 +00:00
9a9df48782
Linux 3.0.9 and 3.1.1
...
svn path=/nixpkgs/trunk/; revision=30427
2011-11-14 16:55:50 +00:00
d800dcc26c
Linux 3.2-rc1
...
svn path=/nixpkgs/trunk/; revision=30336
2011-11-08 16:58:20 +00:00
c65ff0d37d
Update aufs3.0, add aufs3.1
...
svn path=/nixpkgs/trunk/; revision=30329
2011-11-08 16:00:19 +00:00
5e5dd16842
Remove the efi stub patch
...
svn path=/nixpkgs/trunk/; revision=30264
2011-11-06 17:38:51 +00:00
40f93f0b3b
* Increase XEN_MAX_DOMAIN_MEMORY to support 4xlarge EC2 instances.
...
svn path=/nixpkgs/trunk/; revision=30036
2011-10-26 17:34:31 +00:00
6638835c93
Linux 3.0
...
svn path=/nixpkgs/trunk/; revision=30007
2011-10-25 06:21:27 +00:00
f405ee266b
* Enable staging drivers in Linux 3.x. Staging drivers are more experimental
...
and lower quality than regular drivers. However, there are a lot of drivers
for wireless cards that we really need to have. And it doesn't really hurt
to have these drivers if you don't need them.
* Enable the Radeon KMS option. This shouldn't be a problem since the X driver
supports KMS (I think).
svn path=/nixpkgs/trunk/; revision=29994
2011-10-24 16:30:59 +00:00
b3f1015e6b
Linux 3.1
...
svn path=/nixpkgs/trunk/; revision=29993
2011-10-24 16:06:31 +00:00
11941954d8
Linux 3.0.7
...
svn path=/nixpkgs/trunk/; revision=29978
2011-10-23 15:52:28 +00:00
805a4c0261
linux/kernel - added myself to maintainers
...
svn path=/nixpkgs/trunk/; revision=29811
2011-10-13 09:23:22 +00:00
5a5602184e
Whoops, forgot to re-inherit postBuild now that it's not set manually
...
I really should have done these changes in a topic branch, sorry
svn path=/nixpkgs/trunk/; revision=29567
2011-10-02 17:12:50 +00:00
34144e835d
Linux 3.x: Use our module directory during modules_install
...
The "unset MODULE_DIR" trick was enough to get Linux 3.x kernels compiling, but it was definitely the Wrong Thing
We NEED MODULE_DIR set so that depmod can store the right dependencies during the build. The REAL problem with the
3.x kernels was two-fold: Our module-init-tools was so old that the kernel build needed to introduce a hack when
calling depmod (involving creating a symlink prepending 99.98 to the version number), and the depmod wrapper was
moved out of the Makefile into scripts/depmod.sh, so our substituteInPlace to get rid of '-b $(INSTALL_MOD_PATH)' in
the Makefile was a noop and INSTALL_MOD_PATH was still being passed to depmod. This is now fixed and modprobe can
successfully find dependencies using the modules.dep created during install
svn path=/nixpkgs/trunk/; revision=29559
2011-10-02 11:01:08 +00:00
72f41379be
Add a patch to enable adding efi stub code to the linux kernel
...
svn path=/nixpkgs/trunk/; revision=29555
2011-10-01 23:00:48 +00:00
107e39b214
linux-3.1: rc8
...
svn path=/nixpkgs/trunk/; revision=29539
2011-09-28 23:15:30 +00:00
f979d3de4e
Add features.aufs2 to old kernels
...
svn path=/nixpkgs/trunk/; revision=29536
2011-09-28 22:13:59 +00:00
ed38cc3545
aufs3-util
...
svn path=/nixpkgs/trunk/; revision=29535
2011-09-28 21:59:07 +00:00
4add420a48
aufs3 kernelPackage
...
svn path=/nixpkgs/trunk/; revision=29534
2011-09-28 21:46:07 +00:00
2e012018bb
makeAufs3StandalonePatch: Don't unpack the kernel source
...
svn path=/nixpkgs/trunk/; revision=29533
2011-09-28 21:09:54 +00:00
60b155479d
linux-3.0: Add aufs3 patch
...
svn path=/nixpkgs/trunk/; revision=29532
2011-09-28 20:48:08 +00:00
b6a786f097
linux-3.1: Bump to rc7
...
svn path=/nixpkgs/trunk/; revision=29463
2011-09-23 20:03:52 +00:00
2872ccafd6
linux-3.1: Bump to r6
...
Not sure if kernel.org is ever coming back now...
svn path=/nixpkgs/trunk/; revision=29303
2011-09-16 11:26:43 +00:00
4a47336cb5
linux-3.1.nix: Bump to rc5
...
I wanted to wait for kernel.org to get back up, but there doesn't seem to be any information about when that will be. If you don't trust that this is Torvalds' github, see https://lkml.org/lkml/2011/9/4/92 for how to verify
svn path=/nixpkgs/trunk/; revision=29198
2011-09-12 03:38:12 +00:00
e8c849f8e3
* Re-enable the fbcondecor patch for Linux 2.6.35, seems to work fine.
...
svn path=/nixpkgs/trunk/; revision=28974
2011-09-02 13:41:38 +00:00
80db090ed7
add bluetooth audio support for linux 3.0 and 3.1.
...
svn path=/nixpkgs/trunk/; revision=28954
2011-09-01 10:03:06 +00:00
5058e62c56
linux-3.1: Bump to rc4
...
svn path=/nixpkgs/trunk/; revision=28928
2011-08-30 13:25:23 +00:00
72c9b2f62e
linux-3.0.nix: Bump to 3.0.4
...
svn path=/nixpkgs/trunk/; revision=28927
2011-08-30 13:25:11 +00:00
019cc6614a
linux-3.1.nix: Bump to 3.1-rc3
...
svn path=/nixpkgs/trunk/; revision=28765
2011-08-23 02:34:21 +00:00
4b3530f55d
apply aufs patch to other kernels.
...
svn path=/nixpkgs/trunk/; revision=28708
2011-08-20 07:55:53 +00:00
db3eb9de85
utrace: fix urls.
...
But it still does not apply to recent 2.6.32 kernels.
svn path=/nixpkgs/trunk/; revision=28707
2011-08-20 06:47:13 +00:00
22ee5aba7a
aufs for 2.6.36/39 and 3.0
...
svn path=/nixpkgs/trunk/; revision=28705
2011-08-20 06:39:29 +00:00
b541948dee
kernel 2.6.32.44 -> .45
...
svn path=/nixpkgs/trunk/; revision=28704
2011-08-20 06:39:23 +00:00
87e5c7e6fb
Enable options useful for lxc - linux containers. Changing only 3.0/3.1
...
svn path=/nixpkgs/trunk/; revision=28666
2011-08-18 16:10:50 +00:00
739b5aae63
linux-3.0.nix: Bump to 3.0.3. Not sure what happened to 3.0.2...
...
svn path=/nixpkgs/trunk/; revision=28650
2011-08-17 22:48:14 +00:00
e3da49ce82
linux-3.1.nix: Bump to rc2
...
svn path=/nixpkgs/trunk/; revision=28607
2011-08-16 07:24:39 +00:00
5db26b465e
update kernels
...
svn path=/nixpkgs/trunk/; revision=28437
2011-08-09 20:04:03 +00:00
532511e7f5
linux-3.1.nix: Set modDirVersion
...
broadcom-sta: use kernel.modDirVersion in place of kernel.version
svn path=/nixpkgs/trunk/; revision=28406
2011-08-08 20:49:59 +00:00
ffdc37215a
kernel/generic.nix: Add a passed-thru modDirVersion attribute
...
With the new kernel versioning scheme, the first release in a series only has a version number and
a major revision number (e.g. linux 3.0, linux 3.1-rc1, etc.). Unfortunately, the module
directory for these kernels still has a minor revision number (e.g. lib/modules/3.0.0, lib/modules/3.0.1-rc1, etc.).
This causes problems for packages such as broadcom_sta that need to know the module directory, so
this attribute will allow setting the module directory version number separate from the
kernel version number when necessary.
svn path=/nixpkgs/trunk/; revision=28405
2011-08-08 20:49:49 +00:00
56cf7dfe4a
Two options allegedely required for ath9k detection in Linux 3.0+. Without them nothing works, checked.
...
svn path=/nixpkgs/trunk/; revision=28404
2011-08-08 20:49:32 +00:00
6d5004cc42
linux-3.{0,1}: Use the v3.x subdirectory instead of the 3.0 one
...
svn path=/nixpkgs/trunk/; revision=28387
2011-08-08 13:25:18 +00:00
363b0c12d3
linux-3.1: Get the right sources
...
svn path=/nixpkgs/trunk/; revision=28383
2011-08-08 12:47:58 +00:00
8aefeeefed
Base the Linux 3.1 expression off of the Linux 3.0 expression
...
svn path=/nixpkgs/trunk/; revision=28382
2011-08-08 12:32:07 +00:00
5b197147cb
linuxPackages_3_0: Bumped to 3.0.1
...
svn path=/nixpkgs/trunk/; revision=28203
2011-08-06 19:14:13 +00:00
3c05ad236d
* Linux 2.6.32.43.
...
svn path=/nixpkgs/trunk/; revision=27981
2011-07-28 09:32:02 +00:00
20ebca303e
Add comments explaining the purpose of the postBuild prepend
...
svn path=/nixpkgs/trunk/; revision=27922
2011-07-24 20:24:23 +00:00
5db8c88547
Fix problem with linux 3.0 trying to install in /nix/store/...
...
Thanks to MarcWeber on IRC for helping with this
svn path=/nixpkgs/trunk/; revision=27921
2011-07-24 20:24:12 +00:00
e34c2e366e
First attempt at linuxPackages_3_0
...
svn path=/nixpkgs/trunk/; revision=27915
2011-07-24 03:05:00 +00:00
57f59594db
Updating the linux 2.6.39 to 2.6.39.3
...
svn path=/nixpkgs/trunk/; revision=27878
2011-07-21 13:56:25 +00:00
5795d23320
Linux: Actually use `postBuild'.
...
svn path=/nixpkgs/trunk/; revision=27833
2011-07-19 09:03:09 +00:00
69dca5f4aa
Add meta.platforms to the Linux kernel expression.
...
svn path=/nixpkgs/trunk/; revision=27722
2011-07-11 14:07:21 +00:00
12f976e56e
Added Linux 2.6.15
...
svn path=/nixpkgs/trunk/; revision=27721
2011-07-11 14:00:26 +00:00
14f3664d3f
Added Linux 2.6.26
...
svn path=/nixpkgs/trunk/; revision=27720
2011-07-11 14:00:21 +00:00
808c2f69b4
Fixed Linux 2.6.31 compilation
...
linux_2_6_31 compilation was broken and added the CIFS timeout patch.
svn path=/nixpkgs/trunk/; revision=27716
2011-07-11 14:00:03 +00:00
e381c7c385
Added CIFS timeout patch for Linux 2.6.15
...
svn path=/nixpkgs/trunk/; revision=27715
2011-07-11 14:00:01 +00:00
388ba0981b
Added CIFS timeout patch for Linux 2.6.{25 --> 28}
...
svn path=/nixpkgs/trunk/; revision=27713
2011-07-11 13:59:54 +00:00
b2cf02eb5e
Renamed cifs-timeout-2.6.{32 --> 29} patch
...
Renamed cifs-timeout-2.6.32 patch to cifs-timeout-2.6.29 as this is the
older kernel version this patch applies to.
svn path=/nixpkgs/trunk/; revision=27711
2011-07-11 13:59:47 +00:00
c551998c82
Added CIFS timeout patch for Linux 2.6.{35 --> 38}
...
svn path=/nixpkgs/trunk/; revision=27710
2011-07-11 13:59:43 +00:00
df0a6394b3
Suffixed cifs timeout patch with kernel version.
...
Currently suffixed with 2.6.32.
This pre-patch prepares the landing of several versions of this patch to
support other Linux kernel versions.
svn path=/nixpkgs/trunk/; revision=27709
2011-07-11 13:59:40 +00:00
8268a39690
Improved the Linux kernel building framework
...
Moved the hardcoded postBuild hook from the builder to generic.nix:
Some old kernel (such as 2.6.15) did not yet support the unifdef target.
As a result, compiling them with the current Linux builder leads to a
failure.
Fixed by moving this hook as argument of the top-level function of
generic.nix. This allows some kernel nix codes to overrides its default
value.
svn path=/nixpkgs/trunk/; revision=27708
2011-07-11 13:59:37 +00:00
0a127bf64b
* Linux 2.6.32.41.
...
svn path=/nixpkgs/trunk/; revision=27395
2011-06-08 10:36:50 +00:00
186d36ca4b
Fix kernel configuration
...
svn path=/nixpkgs/trunk/; revision=27282
2011-05-20 08:37:25 +00:00
6719630316
Add Linux 2.6.39
...
svn path=/nixpkgs/trunk/; revision=27279
2011-05-19 11:17:34 +00:00
95b7bc1726
* Linux 2.6.32.40.
...
svn path=/nixpkgs/trunk/; revision=27222
2011-05-11 12:56:18 +00:00
d7325f69dd
Updating linux 2.6.37
...
svn path=/nixpkgs/trunk/; revision=26966
2011-04-25 13:33:28 +00:00
8c115162c4
Updating the nanonote kernel 2.6.36, because I was hitting a bug about stack shrinking:
...
https://bugzilla.redhat.com/show_bug.cgi?id=643426
No problem in 2.6.36.3.
svn path=/nixpkgs/trunk/; revision=26947
2011-04-24 12:33:23 +00:00
eaad654e4a
Update Linux kernel version
...
svn path=/nixpkgs/trunk/; revision=26929
2011-04-23 07:10:08 +00:00
73dbdbd1d7
* Linux 2.6.32.38.
...
svn path=/nixpkgs/trunk/; revision=26900
2011-04-20 09:30:46 +00:00
dedd972a16
Add fbcondecor for 2.6.38
...
svn path=/nixpkgs/trunk/; revision=26876
2011-04-18 15:13:04 +00:00
5662304328
Update Linux kernel version
...
svn path=/nixpkgs/trunk/; revision=26872
2011-04-17 20:31:23 +00:00
9d0df24860
Updating linux 2.6.38 to 2.6.38.2
...
svn path=/nixpkgs/trunk/; revision=26832
2011-04-13 20:41:20 +00:00
d86630472b
Add aufs2.1 for 2.6.38
...
svn path=/nixpkgs/trunk/; revision=26811
2011-04-12 18:36:33 +00:00
2f84b4b7b3
* Linux 2.6.32.36.
...
svn path=/nixpkgs/trunk/; revision=26783
2011-04-11 13:42:54 +00:00
16d86dcbe2
Linux 2.6.{25,28}: Allow compilation with recent Glibc.
...
svn path=/nixpkgs/trunk/; revision=26741
2011-04-07 13:57:43 +00:00
38a4604710
Linux 2.6.{28,29}: Disable Xen support, which no longer builds on x86_64.
...
svn path=/nixpkgs/trunk/; revision=26732
2011-04-07 09:57:38 +00:00
6eaaa06077
Committing on behalf of Shea Levy:
...
This patch adds a "features.aufs2_1" to the aufs-2.1 patch for Linux
2.6.37 to prevent aufs2_1 and aufs2_1_util from being options for
kernels without an aufs 2.1 patch. There were several Hydra build
failures as a result of attempting to build aufs2.1 against older
kernels.
svn path=/nixpkgs/trunk/; revision=26597
2011-03-30 08:16:44 +00:00
1357904982
Committing the aufs2.1 patch by Shea Levy. His comments:
...
* My motivation for this patch is that kernels < 2.6.36 contain an
e1000e that does not support the ethernet card that is part of the
chipset for the second-generation Core-i Intel CPUs, so in order
to have a more useful livecd I needed to get aufs working with a
newer kernel, and 2.6.37 is the latest kernel with an official
aufs release.
* All sources are downloaded with fetchgit. This is because the aufs
upstream doesn't provide release tarballs, they just add a tag to
their git tree for an official release.
* The make target for the aufs2.1 headers uses a Makefile in the
kernel build directory that requires that unifdef be in the
scripts/ subdirectory of the build directory. The way I've dealt
with this here is by adding "make $makeFlags -C scripts unifdef"
to the postBuild in the kernel builder. Since the builder is used
by all kernel versions, this will require rebuilding every kernel
and kernel-dependent package if the patch is accepted, so one
alternative I thought of would be to create a fake kernel build
directory where everything is symlinked to the real build
directory except scripts/, which is first copied and then make
unifdef is run before building aufs2.1. If that more complicated
solution is preferred, or if anyone has ideas for another one, I
can do that and submit a new patch.
* The patch was tested by building a livecd ISO that uses it, then
running the ISO from within virtualbox and installing aufs2.1-util
from within the livecd environment.
* The livecd was built using installation-cd-minimal.nix, with two
changes to the Nixos tree:
1. boot.kernelPackages = pkgs.linuxPackages_2_6_37 was added to
profiles/minimal.nix
2. config.boot.kernelPackages.aufs2 was changed to
config.boot.kernelPackages.aufs2_1 in iso-image.nix
I would have preferred to keep all changes within
profiles/minimal.nix, but I couldn't figure out how to override
iso-image.nix's definition of boot.extraModulePackages. Livecds
that use an older kernel can't be built with this iso-image.nix,
since we don't have aufs2.1 for them (just aufs2). If someone can
point me to how I can override things set in iso-image.nix, I'd
appreciate it.
make -C scripts unifdef compiles the unifdef application in the
scripts/ directory, and when Nix copies over the build tree to
$out/lib/modules/$version/build for kernel modules to reference, it
copies over all of scripts/ except the .o files. I can't speak for
other kernel versions, but at the least for 2.6.37.1 unifdef is not
built by default. If you look at the Makefile in scripts, unifdef is
listed under a comment saying that the following programs are only
built on-demand.
svn path=/nixpkgs/trunk/; revision=26548
2011-03-27 15:18:39 +00:00
f6e3d3e10d
Adding tuxonice for some recent kernels.
...
svn path=/nixpkgs/trunk/; revision=26447
2011-03-21 15:53:22 +00:00
84ca32b293
Adding tuxonice for 2.6.35
...
svn path=/nixpkgs/trunk/; revision=26446
2011-03-21 15:42:21 +00:00
8ab38a2828
Adding the fbcondecor patch for 2.6.37, by Shea Levy
...
svn path=/nixpkgs/trunk/; revision=26428
2011-03-19 20:44:45 +00:00
19253151fe
Source for Linux 2.6.38
...
svn path=/nixpkgs/trunk/; revision=26411
2011-03-18 07:51:22 +00:00
5a1dec3588
* Linux 2.6.32.33.
...
svn path=/nixpkgs/trunk/; revision=26344
2011-03-16 09:30:38 +00:00
39828662e9
* Linux 2.6.32.32.
...
svn path=/nixpkgs/trunk/; revision=26225
2011-03-09 12:04:45 +00:00
8944a4110d
* Linux 2.6.32: fix "swiotlb" build failures.
...
svn path=/nixpkgs/trunk/; revision=26180
2011-03-06 19:36:41 +00:00
5cc5e16104
* Remove the xen-pvclock-resume patch, which has finally been merged
...
into 2.6.32.
svn path=/nixpkgs/trunk/; revision=26149
2011-03-03 15:36:13 +00:00
43cca4d6ab
* Linux 2.6.32.30.
...
svn path=/nixpkgs/trunk/; revision=26148
2011-03-03 15:00:30 +00:00
a5dae2652e
kernel: 2.6.37 -> 2.6.37.1
...
svn path=/nixpkgs/trunk/; revision=26108
2011-02-24 22:19:42 +00:00
76b07fbc18
* Linux 2.6.32.29.
...
svn path=/nixpkgs/trunk/; revision=26090
2011-02-24 13:11:51 +00:00
529b17d8c5
* Linux 2.6.27.57, 2.6.32.28.
...
svn path=/nixpkgs/trunk/; revision=25563
2011-01-14 13:01:15 +00:00
48749c756c
kernel: new 2.6.37
...
svn path=/nixpkgs/trunk/; revision=25508
2011-01-11 13:42:59 +00:00
132f791f81
kernel: 2.6.36.2 -> 2.6.36.3
...
svn path=/nixpkgs/trunk/; revision=25507
2011-01-11 13:42:55 +00:00
98c3eed19c
kernel: 2.6.35.7 -> 2.6.35.9
...
svn path=/nixpkgs/trunk/; revision=25506
2011-01-11 13:42:52 +00:00
c14382cb45
* Sync with the trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=25225
2010-12-21 15:14:33 +00:00
0af5585d3c
* Linux 2.6.32.27.
...
svn path=/nixpkgs/trunk/; revision=25209
2010-12-20 12:18:37 +00:00
b48b2a7bb4
Merging from trunk. I solved some trivial merge conflicts.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=25188
2010-12-17 20:39:58 +00:00
dc94479f5f
Updating the linux 2.6.36 to 2.6.36.2
...
svn path=/nixpkgs/trunk/; revision=25185
2010-12-17 20:28:50 +00:00
ee04ffcb55
Updating from trunk. I resolved simple conflicts.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=25061
2010-12-11 12:47:00 +00:00
09bcba17f5
Adding the nanonote openwrt 2.6.36 kernel
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=25005
2010-12-06 15:30:19 +00:00
9feaa9db94
* Linux 2.6.32.26.
...
svn path=/nixpkgs/trunk/; revision=24911
2010-11-29 09:52:50 +00:00
13a8b34a81
Fix for a syscall restart bug on linux-mips
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=24791
2010-11-21 15:26:36 +00:00
8746de3ae8
Updating from trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=24674
2010-11-11 22:18:14 +00:00
e119bdb5de
Enable VGA_SWITCHEROO
...
svn path=/nixpkgs/trunk/; revision=24667
2010-11-11 21:37:35 +00:00
528dc56ce1
* Linux 2.6.32.25.
...
svn path=/nixpkgs/trunk/; revision=24588
2010-11-03 20:54:20 +00:00
f4f84af4ab
Updating from trunk. I only had to take away the usual stdenv2 in
...
all-packages.nix
svn path=/nixpkgs/branches/stdenv-updates/; revision=24553
2010-10-31 19:30:31 +00:00
85a0cd1385
* A better fix for the Xen clock problem.
...
svn path=/nixpkgs/trunk/; revision=24488
2010-10-26 13:08:51 +00:00
5762edd607
* Linux 2.6.32: revert upstream patch
...
489fb490dbf8dab0249ad82b56688ae3842a79e8. It causes the DomU clock
to jump into the future and freeze after being saved and restored
across a Dom0 reboot. See
http://lists.xensource.com/archives/html/xen-devel/2010-10/msg00498.html
http://lists.xensource.com/archives/html/xen-devel/2010-10/msg01174.html
svn path=/nixpkgs/trunk/; revision=24473
2010-10-25 16:36:42 +00:00
6dc839d344
Merging from trunk. I resolved some conflicts; I hope that well.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=24429
2010-10-23 14:52:21 +00:00
ac19af507f
Adding Linux 2.6.36
...
svn path=/nixpkgs/trunk/; revision=24403
2010-10-21 12:28:14 +00:00
bf6f39fb7c
Adding a patch fixing ARM trouble on the recent linux 2.6.35
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=24158
2010-10-07 22:10:28 +00:00
fca582bff0
Updating from trunk. I had to resolve the pcre and some stdenv2 in all-packages
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=24155
2010-10-07 21:21:31 +00:00
872fa6577d
* Update the Xen pvops kernel.
...
svn path=/nixpkgs/trunk/; revision=24145
2010-10-07 14:06:44 +00:00
1f136b4630
Update Linux 2.6.35 to .35.7
...
svn path=/nixpkgs/trunk/; revision=24105
2010-10-06 06:58:05 +00:00
80607fd285
* Linux 2.6.32.24, which fixes booting on Xen.
...
svn path=/nixpkgs/trunk/; revision=24065
2010-10-05 10:38:25 +00:00
cd4b54748a
Updating from trunk
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=24038
2010-10-03 09:25:34 +00:00
2368ca287c
* Linux 2.6.32.23.
...
svn path=/nixpkgs/trunk/; revision=23997
2010-09-30 13:53:13 +00:00
87aed78cc0
Updating to linux 2.6.35.6
...
svn path=/nixpkgs/trunk/; revision=23976
2010-09-27 21:22:55 +00:00
30765e4be9
update kernels
...
svn path=/nixpkgs/trunk/; revision=23974
2010-09-27 20:05:42 +00:00
9f696ae43e
Revert "Make kernel work for me". Committed this by accident.
...
This reverts commit 8a2cd2c99f26e5bd5c5a324e2a1712db8991379e.
svn path=/nixpkgs/trunk/; revision=23856
2010-09-18 16:22:04 +00:00
5bc3007bf6
Make kernel work for me
...
svn path=/nixpkgs/trunk/; revision=23855
2010-09-18 16:20:06 +00:00
2c5de61327
Updating from trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23840
2010-09-17 19:10:21 +00:00
078353fc15
Linux: Add GuruPlug-related patches.
...
svn path=/nixpkgs/trunk/; revision=23833
2010-09-17 15:56:42 +00:00
13f346058c
* Add a branch of the Linux kernel that can be used in Xen's Dom0.
...
From http://git.kernel.org/?p=linux/kernel/git/jeremy/xen.git;a=shortlog;h=refs/heads/xen/stable-2.6.32.x
svn path=/nixpkgs/trunk/; revision=23729
2010-09-10 16:27:39 +00:00
ead1b8bc5c
* Move config-blocks.nix to zen-kernel where it's used.
...
svn path=/nixpkgs/trunk/; revision=23721
2010-09-10 14:07:22 +00:00
9ff5c12798
* Remove the systemtap option from linux-2.6.32.nix and use
...
extraConfig instead.
svn path=/nixpkgs/trunk/; revision=23720
2010-09-10 14:06:56 +00:00
a42e571e33
Trying to fix an URL for a patch (the previous URL did not work anyamore)
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23700
2010-09-09 17:07:12 +00:00
bd17763fbb
Fixing an url on kernel patches
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23639
2010-09-05 05:59:55 +00:00
641f956581
Setting any stdenv.system references for the loongson2f system to 'mips64-linux'.
...
(my git-svn info:)
Merge branch 'mips64' into stdenv-updates
Conflicts:
pkgs/applications/networking/browsers/firefox/3.6.nix
pkgs/top-level/all-packages.nix
svn path=/nixpkgs/branches/stdenv-updates/; revision=23588
2010-09-01 09:50:12 +00:00
cca1cae042
Updating from trunk. I had to do some changes to make it fit.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23500
2010-08-29 11:09:23 +00:00
a73c3a96e6
Correct patch for AUFS2 2.6.35.*
...
svn path=/nixpkgs/trunk/; revision=23498
2010-08-29 10:37:58 +00:00
3f400cc2e3
* Latest kernels.
...
svn path=/nixpkgs/trunk/; revision=23476
2010-08-27 08:44:07 +00:00
509fa794dd
* Linux 2.6.32.20, 2.6.27.52. This fixes the "scheduling while
...
atomic" regression.
svn path=/nixpkgs/trunk/; revision=23386
2010-08-24 09:01:48 +00:00
fb24277ef2
Update Linux kernel to 2.6.35.3 - 2.6.35.2 has a few lockup regressions
...
svn path=/nixpkgs/trunk/; revision=23356
2010-08-23 11:49:17 +00:00
be17d69549
Fix problem in aufs2-35.patch
...
svn path=/nixpkgs/trunk/; revision=23291
2010-08-20 21:35:11 +00:00
d3d44dc6d3
Add AUFS patch for 2.6.35
...
svn path=/nixpkgs/trunk/; revision=23288
2010-08-20 20:46:12 +00:00
10c5146a78
Add fbcondecor-2.6.35
...
svn path=/nixpkgs/trunk/; revision=23286
2010-08-20 20:12:03 +00:00
f16353b6f2
Updated from trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23275
2010-08-20 13:41:12 +00:00
f7d0fcdaac
Making the kernel builder accept the 'vmlinux' kerneltarget.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23274
2010-08-20 13:30:59 +00:00
7dea1a0f4f
* Revert to 2.6.32.18 for now, because we get a lot of "BUG:
...
scheduling while atomic" errors
(e.g. http://hydra.nixos.org/build/568323/log/raw ). This might be
fixed by this patch: http://lkml.org/lkml/2010/8/6/672
svn path=/nixpkgs/trunk/; revision=23272
2010-08-20 13:13:26 +00:00
2e230288bf
* Latest kernels.
...
svn path=/nixpkgs/trunk/; revision=23270
2010-08-20 09:29:10 +00:00
2d062ba772
Allow override options being required in kernel configuration.. Otherwise modifying significantly config via extraConfig becomes practically impossible.
...
svn path=/nixpkgs/trunk/; revision=23171
2010-08-14 09:18:57 +00:00
92d437c54f
kernel updates and add kernel 2.6.35.1
...
svn path=/nixpkgs/trunk/; revision=23155
2010-08-12 16:33:19 +00:00
e4686546ec
* Enable parallel building for the Linux kernel, an obvious candidate.
...
svn path=/nixpkgs/trunk/; revision=23109
2010-08-11 10:43:09 +00:00
5c8b4ec35a
* Linux 2.6.32.18.
...
svn path=/nixpkgs/trunk/; revision=23104
2010-08-11 09:25:35 +00:00
4137ceaf80
Updated nanonote 2.6.35 kernel (fixed a keyboard matrix problem)
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23041
2010-08-08 18:50:10 +00:00
eddc9d6ab5
Fixing the nanonote kernel expressions so they work.
...
In fact only 2.6.34 boots fine, while 2.6.35 needs a fetchsvn new revision,
waiting for an upstream patch.
svn path=/nixpkgs/branches/stdenv-updates/; revision=23039
2010-08-08 18:46:57 +00:00
46082f25f9
Updating from trunk
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=23027
2010-08-07 20:14:04 +00:00
8783e812b5
More changes beyond stdenv-linux for the fuloong2f platform
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=22973
2010-08-05 18:51:12 +00:00
b17d1d7d07
Adding nanonote kernel and uboot
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=22943
2010-08-04 11:07:13 +00:00
5a08a41204
* Kernel updates.
...
svn path=/nixpkgs/trunk/; revision=22941
2010-08-04 10:40:25 +00:00
3f287cfb1d
* Ensure that the dell-bluetooth device does not stay in the "hard
...
blocked" state.
svn path=/nixpkgs/branches/x-updates/; revision=22730
2010-07-25 12:15:59 +00:00
3d442ad185
* Apply a patch that is apparently required to make the kernel work
...
properly on Amazon EC2.
* Always apply the CIFS timeout patch. It's rather annoying to have
to build a separate kernel for the VM tests.
svn path=/nixpkgs/trunk/; revision=22630
2010-07-18 21:10:46 +00:00
237c7808ce
* Latest Linux kernels.
...
svn path=/nixpkgs/trunk/; revision=22488
2010-07-06 08:44:05 +00:00
cb5bcfa04a
* In the VM tests, apply a patch to increase the 15s timeout on CIFS
...
operations to 120s. This is necessary if the host is heavily
loaded. For instance, in the Hydra build farm, if there are many
concurrent jobs, VM builds often fail because they hit the timeout.
svn path=/nixpkgs/trunk/; revision=22347
2010-06-20 20:52:08 +00:00
c6b05c7164
aufs2: patch for kernel 2.6.34
...
svn path=/nixpkgs/trunk/; revision=22178
2010-06-08 06:29:02 +00:00
6daa7866ca
* Only build aufs2 for kernels that have the requisite base/standalone
...
patch applied.
svn path=/nixpkgs/trunk/; revision=22037
2010-05-28 09:29:39 +00:00
74b6d94ed5
* Get aufs2 and aufs2-util to build against Linux 2.6.32.
...
svn path=/nixpkgs/trunk/; revision=22032
2010-05-28 07:09:15 +00:00
7c19b40dbf
kernel-2.6.34
...
The Linux 2.6.34 kernel delivers (from [1])
- many open-source GPU driver updates,
- GPU switching support,
- the LogFS file-system,
- faster KVM networking support,
- Btrfs file-system updates,
- the VMware memory ballooning driver,
- and many other changes.
A more exhaustive list of the Linux 2.6.34 kernel changes from
architectures to network drivers is listed on the Wiki at
KernelNewbies.org.[2]
[1] http://www.phoronix.com :
[2] http://kernelnewbies.org/Linux_2_6_34
svn path=/nixpkgs/trunk/; revision=22023
2010-05-27 19:44:23 +00:00
8f99f22819
* Kernel updates.
...
svn path=/nixpkgs/trunk/; revision=22002
2010-05-27 12:16:05 +00:00
a310fc9ed0
* Latest kernels.
...
svn path=/nixpkgs/trunk/; revision=21874
2010-05-19 12:28:54 +00:00
3bda68d779
Linux: Attempt to copy more debugging info to $out.
...
svn path=/nixpkgs/trunk/; revision=21624
2010-05-06 11:52:49 +00:00
074f450ab3
Linux: Patch incorrect absolute paths in makefiles.
...
svn path=/nixpkgs/trunk/; revision=21623
2010-05-06 11:52:43 +00:00
96f2d289bc
Don't strip Linux modules in the SystemTap variant.
...
svn path=/nixpkgs/trunk/; revision=21619
2010-05-05 19:48:52 +00:00
588be9d6db
Add a Linux kernel suitable for SystemTap.
...
svn path=/nixpkgs/trunk/; revision=21618
2010-05-05 19:48:46 +00:00
68d9e26bcb
* Linux 2.6.32.12, 2.6.33.3.
...
svn path=/nixpkgs/trunk/; revision=21338
2010-04-27 09:52:36 +00:00
5330be5fbb
* Latest Linux kernels.
...
svn path=/nixpkgs/trunk/; revision=20952
2010-04-06 10:33:49 +00:00
6934d0770c
Fix build of fresh Zen kernels: POSIX ACL seems to be non-optional in OCFS2 now
...
svn path=/nixpkgs/trunk/; revision=20684
2010-03-17 10:04:35 +00:00
f02cd9d59c
* Linux updated to 2.6.32.10, 2.6.33.1.
...
svn path=/nixpkgs/trunk/; revision=20646
2010-03-16 11:44:28 +00:00
11c20b3a2c
Making the cross kernel builds take properly the cross-built uboot, when needed.
...
svn path=/nixpkgs/trunk/; revision=20455
2010-03-06 22:04:21 +00:00
ef1918f200
Allowing the kernel to build in the sheevaplug natively.
...
svn path=/nixpkgs/trunk/; revision=20284
2010-02-28 08:58:07 +00:00
289d728337
Fixing the kernel expressions to allow normal and cross-building, depending
...
on the native and cross platforms.
I thought I already did that today in a previous commit, but I did all wrong.
svn path=/nixpkgs/trunk/; revision=20280
2010-02-27 21:48:48 +00:00
3b747e92e5
Fixing the correct handling of uboot in the initrd and the kernel derivations.
...
(nixos on sheevaplug)
svn path=/nixpkgs/trunk/; revision=20275
2010-02-27 18:51:06 +00:00
11aa65c28a
Simplified much more the expressions for cross building and multiplatform.
...
I introduce the new nixpkgs parameter "platform", defaulting to "pc",
which was before defined as an attribute of nixpkgs.
I made the crossSystem nixpkgs attribute set parameter contain its own 'platform'.
This allows cross-building a kernel for a given crossSystem.platform in a non-PC
platform.
The actual native platform can be taken from stdenv.platform, and this way we also
avoid the constant passing of 'platform' to packages for platform-dependant builds
(kernel, initrd, ...).
I will update nixos accordingly to these changes, for non-PC platforms to work.
I think we are gaining on flexibility and clearness. I could cross build succesfully
an ultrasparc kernel and a mipsel kernel on PC. But since this change, I should be able
to do this also in non-PC.
Before this change, there was no possibility of distinguishing the "target platform" or
the "native build platform" when cross building, being the single "platform" attribute
always interpreted as target platform.
The platform is a quite relevant attribute set, as it determines the linuxHeaders used
(in the case, by now the only one supported, of linux targets).
The platform attributes are quite linux centric still. Let's hope for more generality to come.
svn path=/nixpkgs/trunk/; revision=20273
2010-02-27 17:35:47 +00:00
61c9c2434f
* Updated fbcondecor for Linux 2.6.33.
...
svn path=/nixpkgs/trunk/; revision=20257
2010-02-25 14:15:42 +00:00
280ba422b8
* Linux 2.6.32.9.
...
svn path=/nixpkgs/trunk/; revision=20255
2010-02-25 13:55:57 +00:00
e04c9a452a
* Linux 2.6.33.
...
svn path=/nixpkgs/trunk/; revision=20246
2010-02-25 12:40:03 +00:00
9727f3d707
Making the i915 module Kernel Mode Setting enabled.
...
This is required by the X module nowadays, and the linux i686 config does not
have it enabled by default.
svn path=/nixpkgs/trunk/; revision=20136
2010-02-19 18:28:02 +00:00
50e309f022
linux: Removing some assertions on armv5tel no more valid when cross-building.
...
svn path=/nixpkgs/trunk/; revision=20119
2010-02-18 21:10:53 +00:00
9bcb6277f3
Changing linux kernel references from vmlinuz to bzImage.
...
This way we get a simpler kernel build script.
svn path=/nixpkgs/trunk/; revision=20094
2010-02-18 11:34:48 +00:00
5fc64e5f9c
Again, trying to fix the kernel build.
...
It seems that there is no make target named 'vmlinuz' that makes the file 'vmlinuz'.
So we need different variables for the make target and the kernel file. Unless we
some day stop using the file 'vmlinuz' in pc, and use bzImage.
svn path=/nixpkgs/trunk/; revision=20092
2010-02-18 10:25:33 +00:00
ee72c53378
Trying to fix the non-cross kernel build.
...
svn path=/nixpkgs/trunk/; revision=20090
2010-02-18 08:02:16 +00:00
4e51d7d296
Fixing the linux kernel cross builder (lacking an ARCH again in a make call)
...
svn path=/nixpkgs/trunk/; revision=20081
2010-02-17 22:36:59 +00:00
70cb7050f5
Trying to make the linux kernels also cross-build.
...
svn path=/nixpkgs/trunk/; revision=20080
2010-02-17 22:20:56 +00:00
c86da889cc
Made the kernel generate-config "build as modules as you can" an option.
...
Sepcifically, a nixpkgs "platform" option. So, for PC all remained the same
as it was.
svn path=/nixpkgs/trunk/; revision=20059
2010-02-16 19:27:51 +00:00
2027b96de5
* Linux 2.6.32.8.
...
svn path=/nixpkgs/trunk/; revision=19933
2010-02-11 14:33:17 +00:00
a617a7c239
* Sync with the trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19786
2010-02-03 14:23:43 +00:00
26ea153e8b
svn path=/nixpkgs/trunk/; revision=19724
2010-01-29 00:38:34 +00:00
e04beb262e
* Strangely, running "make defconfig" before the generator causes
...
"make config" to print an additional question that the script
doesn't know how to answer ("Audio Excel DSP 16 [N/y] (NEW) ###").
Just ignore it.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19713
2010-01-27 15:43:27 +00:00
561e37cfe0
* Linux 2.6.32.6, 2.6.27.44.
...
svn path=/nixpkgs/trunk/; revision=19661
2010-01-26 10:18:14 +00:00
bcba809460
Updating from trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19654
2010-01-25 18:52:07 +00:00
44457a9ad7
Fixing a typo in options
...
svn path=/nixpkgs/trunk/; revision=19563
2010-01-20 11:06:20 +00:00
d2795e889c
Force CFS in zen-kernel not specified as BFS
...
svn path=/nixpkgs/trunk/; revision=19557
2010-01-20 06:24:29 +00:00
30477123ef
Allow building kernels for CPUs incapable of running Xen
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19489
2010-01-16 20:40:59 +00:00
70dd97620c
Updating from trunk
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19485
2010-01-16 15:19:23 +00:00
c0bca28b2f
Do not insist on using CONFIG_PAE if we are trying to build a non-PAE kernel
...
svn path=/nixpkgs/trunk/; revision=19454
2010-01-15 05:30:00 +00:00
9183f21f7e
Merging from trunk.
...
I fixed conflicts regarding the renaming 'kernel' -> 'linux' in all-packages.
Also a small conflict in all-packages about making openssl overridable.
And I some linux 2.6.31-zen kernel files also marked in conflict.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19438
2010-01-14 14:49:31 +00:00
5bf63365d2
Update options according to renaming of them in Zen
...
svn path=/nixpkgs/trunk/; revision=19407
2010-01-13 16:19:48 +00:00
fdc45114a7
Remove tabs
...
svn path=/nixpkgs/trunk/; revision=19403
2010-01-13 15:42:08 +00:00
77c9077f0a
Adding a attrSet to import configuration chunks from
...
svn path=/nixpkgs/trunk/; revision=19398
2010-01-13 15:16:08 +00:00
0f38401813
* Latest and greatest kernels.
...
svn path=/nixpkgs/trunk/; revision=19287
2010-01-07 14:10:39 +00:00
ed4447febd
* Urgh - generic.nix doesn't expect a `extraConfig' argument.
...
svn path=/nixpkgs/trunk/; revision=19205
2010-01-04 13:14:39 +00:00
e3c2b77c11
* Add the gcov patch to patches.nix.
...
svn path=/nixpkgs/trunk/; revision=19190
2010-01-03 17:57:08 +00:00
d864771e26
Updating from trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19139
2009-12-28 11:40:34 +00:00
d5aa5641de
Fixing the evaluation of the linux kernel (= /= ==)
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19138
2009-12-28 11:26:23 +00:00
1452ce46a4
Fixing the kernel configuration for the sheevaplug
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=19137
2009-12-28 10:35:34 +00:00
ea5a440d42
* Linux 2.6.32.2, 2.6.27.42.
...
svn path=/nixpkgs/trunk/; revision=19091
2009-12-24 12:48:01 +00:00
9ef11e4c4d
Made the linux kernel expressions support 'platform' again (thinking on reusing
...
most of the kernel expressions for the sheevaplug).
I still have not added anything in the kernels about cross compilation.
I moved the platform definitions out of all-packages.
I have not written good platform definitions for the sheevaplug - only for the
PC.
Only the linux-2.6.32 expression uses the platforms kernelConfig.
The linux-2.6.31 was broken, and I left it broken.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19046
2009-12-19 12:12:24 +00:00
5bae851b1e
Merging from trunk. I had to give away some structure to build the native
...
sheevaplug kernel, so the kernel does not build in the sheevaplug right now.
I will try to fix that in next commits.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19045
2009-12-19 11:14:16 +00:00
c122c7a5ba
* Hm, I thought I tested this...
...
svn path=/nixpkgs/trunk/; revision=19032
2009-12-18 12:23:13 +00:00
cfd6dd29fe
* Linux 2.6.32.1.
...
svn path=/nixpkgs/branches/kernel-config/; revision=19000
2009-12-16 19:22:42 +00:00
f833d465e6
* Enable Kernel Samepage Merging.
...
svn path=/nixpkgs/branches/kernel-config/; revision=18949
2009-12-14 19:30:25 +00:00
2e5908b1df
* Use the kernel config generator for Linux 2.6.25.
...
svn path=/nixpkgs/branches/kernel-config/; revision=18948
2009-12-14 19:08:20 +00:00
00c641d336
* Use the kernel config generator for Linux 2.6.28.
...
* Get rid of Linux 2.6.20 and 2.6.26 (the former was only used for
building UML).
svn path=/nixpkgs/branches/kernel-config/; revision=18945
2009-12-14 18:34:46 +00:00
ec2fd60f88
* Doh!
...
svn path=/nixpkgs/branches/kernel-config/; revision=18944
2009-12-14 18:30:52 +00:00
c3e80cbc9f
* Get User-Mode Linux to build with a newer kernel. Yes, SHELL really
...
has to be "/bin/sh" - other values such as "sh" or "bash" or "$(type
-tP sh)" cause a build error:
LD .tmp_vmlinux1
/nix/store/1yv8i1m76cvwk5w5i5wrk4gj5zyfj6vh-binutils-2.19.1/bin/ld:arch/um/kernel/vmlinux.lds:1: ignoring invalid character `#' in expression
/nix/store/1yv8i1m76cvwk5w5i5wrk4gj5zyfj6vh-binutils-2.19.1/bin/ld:arch/um/kernel/vmlinux.lds:1: syntax error
collect2: ld returned 1 exit status
This is caused by Bash 4.0
(http://bugzilla.kernel.org/show_bug.cgi?id=13343 ).
svn path=/nixpkgs/branches/kernel-config/; revision=18941
2009-12-14 17:22:38 +00:00
03b4efe9c8
* Use the kernel config generator for Linux 2.6.27.
...
* Move kernel patches out of all-packages.nix to
os-specific/linux/kernel/patches.nix.
* Make the kernel config available under $out/config (it's also in
$out/lib/modules/$version/build/.config, but that's kind of hard to
find).
svn path=/nixpkgs/branches/kernel-config/; revision=18937
2009-12-14 15:28:55 +00:00
98101f9cb1
* Linux 2.6.32.
...
svn path=/nixpkgs/branches/kernel-config/; revision=18932
2009-12-14 10:15:52 +00:00
15c6ede144
* Allow options to be ignored if they don't exist by marking them with
...
a "?".
svn path=/nixpkgs/branches/kernel-config/; revision=18931
2009-12-14 09:27:15 +00:00
71ed6194e1
* Get fbcondecor to work.
...
* Barf on ignored options.
svn path=/nixpkgs/branches/kernel-config/; revision=18914
2009-12-12 18:55:17 +00:00
03e45e0cb4
* Added a script to generate the kernel configuration.
...
`generate-config.pl' runs `make config' to generate a Linux kernel
configuration file. For each question (i.e. kernel configuration
option), unless an override is provided, it answers "m" if possible,
and otherwise uses the default answer (as determined by the default
config for the architecture). This is safer than allmodconfig,
which answers "y" everywhere it can't answer "m" and thus ends up
enabling a lot of experimental or debug options. (For this reason,
a configuration generated by allmodconfig must be carefully checked
with every new release to ensure that nothing dangerous is enabled.
The default config should be safer wrt new kernel releases.)
Overrides are specified in the `config' argument to generic.nix,
which is a string that contains lines such as `EXT2_FS_POSIX_ACL y'.
The script warns about ignored options, and aborts if `make config'
selects an answer inconsistent with the one in `config'. This
allows us to be sure that `make config' doesn't silently override
our configuration values (e.g., depending on other options, it will
set FB_TILEBLITTING to "y" even if we want it to be "n").
svn path=/nixpkgs/branches/kernel-config/; revision=18910
2009-12-12 13:51:07 +00:00
89fe676bb3
Updating from trunk.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=18878
2009-12-10 14:48:45 +00:00
ebeacec489
* Linux 2.6.27.39.
...
svn path=/nixpkgs/trunk/; revision=18838
2009-12-08 11:38:19 +00:00
84eb2eadef
Apply patch from Lluis needed for future ARM merge..
...
svn path=/nixpkgs/trunk/; revision=18776
2009-12-03 07:08:51 +00:00
7769ad11bd
Updating the logic to put the resulting kernel image into its store path.
...
svn path=/nixpkgs/branches/stdenv-updates/; revision=18289
2009-11-08 17:19:46 +00:00
4b27d28701
Porting changes from stdenv-updates into this branch.
...
This comes from:
svn diff ^/nixpkgs/trunk/@18255 ^/nixpkgs/branches/stdenv-updates/ > diff
patch -p0 < diff
and then adding into svn all files new from the patch.
trunk@18255 comes from the last time I updated stdenv-updates from trunk.
svn path=/nixpkgs/stdenv-updates2/; revision=18272
2009-11-08 00:32:12 +00:00
45ba16864f
* Deleted some obsolete kernels (2.6.20, 2.6.21, 2.6.22, 2.6.23 and
...
the 2.6.31rcs).
svn path=/nixpkgs/trunk/; revision=18065
2009-11-01 17:17:40 +00:00
41879a5c74
* Linux 2.6.27.38.
...
svn path=/nixpkgs/trunk/; revision=17985
2009-10-28 12:07:00 +00:00
37b42b3ab7
Linux: Enable `sdhci', for Ricoh SD readers.
...
svn path=/nixpkgs/trunk/; revision=17954
2009-10-25 15:22:54 +00:00
21ddf5e52e
* Linux 2.6.27.37.
...
svn path=/nixpkgs/trunk/; revision=17909
2009-10-21 13:07:09 +00:00
213519d327
* Linux 2.6.27.35.
...
svn path=/nixpkgs/trunk/; revision=17422
2009-09-25 18:59:07 +00:00
f4162c9716
Turn off more debug options not needed by default
...
svn path=/nixpkgs/trunk/; revision=17103
2009-09-13 20:22:37 +00:00
a8fa3e9cc9
Removing more debugging options from default 2.6.31 config
...
svn path=/nixpkgs/trunk/; revision=17101
2009-09-13 20:10:19 +00:00
01063c854b
Remove option stopping 2.6.31 from booting
...
svn path=/nixpkgs/trunk/; revision=17094
2009-09-13 16:24:44 +00:00
0462878b22
Fixing a typo
...
svn path=/nixpkgs/trunk/; revision=17067
2009-09-12 07:33:55 +00:00
a5023cf381
Adding 2.6.31 kernel and trying to generate config for it without manual operations
...
svn path=/nixpkgs/trunk/; revision=17065
2009-09-12 07:13:20 +00:00
491255bbb3
Trying to add Zen Linux Kernel
...
svn path=/nixpkgs/trunk/; revision=17050
2009-09-11 13:16:18 +00:00
2dffe66c92
* Linux 2.6.27.31.
...
svn path=/nixpkgs/trunk/; revision=16754
2009-08-18 09:29:03 +00:00
e8dbd26bee
* Linux 2.6.27.29.
...
svn path=/nixpkgs/trunk/; revision=16554
2009-08-03 10:04:20 +00:00
be5fc98c97
Really non-PAE configuration this time
...
svn path=/nixpkgs/trunk/; revision=16552
2009-08-03 09:25:57 +00:00
3baa3663c9
Try newer -RC kernel
...
svn path=/nixpkgs/trunk/; revision=16504
2009-07-29 18:10:26 +00:00
15bec036fa
Add 2.6.31-rc2 kernel for now : rc3 has a BtrFS stability regression
...
svn path=/nixpkgs/trunk/; revision=16384
2009-07-16 06:30:25 +00:00
8eefb03231
Fix typo
...
svn path=/nixpkgs/trunk/; revision=16383
2009-07-15 21:09:17 +00:00
0865385a29
Add a config for older x86 processors without PAE support. Turn off PAT for a good measure, too
...
svn path=/nixpkgs/trunk/; revision=16382
2009-07-15 21:01:24 +00:00
57c8392eee
Fixed cmdline override in 2.6.31-rc3 kernel config
...
svn path=/nixpkgs/trunk/; revision=16362
2009-07-14 19:24:10 +00:00
a310f4f2a0
Forgot to turn off debugging options in all-mod-config..
...
svn path=/nixpkgs/trunk/; revision=16347
2009-07-14 10:23:45 +00:00
396ae631ea
Add AMD64 config for 2.6.31-rc3
...
svn path=/nixpkgs/trunk/; revision=16346
2009-07-14 09:57:51 +00:00
64c89c7532
Oops, mixed up hashes
...
svn path=/nixpkgs/trunk/; revision=16345
2009-07-14 09:18:22 +00:00
ad2f62980a
Try building a really full-featured configuration of the fresh Linux kernel pre-release
...
svn path=/nixpkgs/trunk/; revision=16344
2009-07-14 09:13:59 +00:00
bfadd94cec
* Kernel updates.
...
svn path=/nixpkgs/trunk/; revision=16155
2009-07-03 09:11:46 +00:00
85479e92d1
* Linux 2.6.29.5.
...
* Build the PC speaker as a module. This allows people who are
annoyed by beeps (e.g. users of Dell Latitude D6xx laptops) to get
rid of them :-)
svn path=/nixpkgs/trunk/; revision=15983
2009-06-17 12:26:22 +00:00
588eb7a351
* Linux 2.6.27.25.
...
svn path=/nixpkgs/trunk/; revision=15962
2009-06-15 15:05:42 +00:00
e559192847
* Fix module installation.
...
svn path=/nixpkgs/trunk/; revision=15887
2009-06-07 21:49:14 +00:00
86e3458dd7
* Linux 2.6.29. It doesn't build yet due to some depmod problem.
...
svn path=/nixpkgs/trunk/; revision=15884
2009-06-06 23:09:38 +00:00
6645fcb0c5
* Oops.
...
svn path=/nixpkgs/trunk/; revision=15821
2009-06-02 12:29:40 +00:00
32aa1eacf3
* Linux 2.6.27.24, 2.6.28.10.
...
svn path=/nixpkgs/trunk/; revision=15819
2009-06-02 09:48:01 +00:00
65a87fefd5
Fix kernel builder - fails, depending on FS behavior
...
svn path=/nixpkgs/trunk/; revision=15437
2009-05-04 10:51:51 +00:00
10b1740dab
Copy all the headers already - problems with module building seem to be worse than hdd usage
...
svn path=/nixpkgs/trunk/; revision=15423
2009-05-02 14:18:22 +00:00
7689a348c4
* Got rid of a lot of "postInstall=postInstall" and similar lines in
...
builders. These are redundant now.
* Inlined some trivial builders.
* Removed a few explicit setup-hook creations. This is done
automatically now if setupHook is set.
* Deleted the initscripts package. NixOS doesn't use it anymore.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15276
2009-04-23 13:31:10 +00:00
9379c34b11
Renable preConfigure for kernel builder. Actually needed by custom kernel
...
Linux kernel 2.6.29 (release) has a slightly changed Makefile. They now add the prefix for depmod. So in NixOS "make modules_install" fails on depmod. To fix it, our old '/-b \$(INSTALL_MOD_PATH) -r/d' should be replaced with '/-b \$(INSTALL_MOD_PATH)/d'.
svn path=/nixpkgs/trunk/; revision=14811
2009-03-31 20:10:05 +00:00
105f9f7b80
* Some kernel updates.
...
svn path=/nixpkgs/trunk/; revision=14790
2009-03-30 15:02:17 +00:00
b161fd2921
Linux: Build the `sdhci' module, for Ricoh SD readers.
...
svn path=/nixpkgs/trunk/; revision=14541
2009-03-15 14:03:59 +00:00
f8641d34a2
* Latest kernels.
...
svn path=/nixpkgs/trunk/; revision=14486
2009-03-10 09:05:43 +00:00
958a01ffa6
These changes to kernel builder are obviously needed. kQemu is built, but causes kernel oops
...
svn path=/nixpkgs/trunk/; revision=14213
2009-02-24 05:10:36 +00:00
f9b79d752a
Fixing in general the module construction (there were wrong paths in modules/build). Now kqemu works well for me, for instance. I will take the commit back, if it annoys anyone.
...
svn path=/nixpkgs/trunk/; revision=14192
2009-02-22 20:49:35 +00:00
a6a74c53f8
* Latest 2.6.{27,28} kernels.
...
svn path=/nixpkgs/trunk/; revision=14136
2009-02-20 10:56:00 +00:00
5e3c509cb8
* Latest kernels.
...
svn path=/nixpkgs/trunk/; revision=14019
2009-02-10 11:10:12 +00:00
a6867fa9a3
* Linux 2.6.28.3.
...
svn path=/nixpkgs/trunk/; revision=13963
2009-02-02 19:00:30 +00:00
858cf3cdcb
* Wrong hash.
...
svn path=/nixpkgs/trunk/; revision=13899
2009-01-29 11:00:56 +00:00
e5349d1716
* Linux 2.6.27.13 and 2.6.28.2.
...
svn path=/nixpkgs/trunk/; revision=13887
2009-01-27 14:56:17 +00:00
4e9b120ad2
small fixes to build custom kernel
...
svn path=/nixpkgs/trunk/; revision=13795
2009-01-17 13:40:12 +00:00
4eedf7dae8
* Install the arch-specific headers for Linux <= 2.6.27 properly
...
again.
svn path=/nixpkgs/trunk/; revision=13783
2009-01-16 10:28:18 +00:00
89364df3e9
svn path=/nixpkgs/trunk/; revision=13781
2009-01-15 16:22:01 +00:00
7df6cdf6da
* Doh.
...
svn path=/nixpkgs/trunk/; revision=13780
2009-01-15 15:59:59 +00:00
f89876974e
* Use the generic kernel builder.
...
svn path=/nixpkgs/trunk/; revision=13779
2009-01-15 15:54:24 +00:00
a0670a904e
* Reduce duplication between kernel expressions.
...
svn path=/nixpkgs/trunk/; revision=13778
2009-01-15 15:40:23 +00:00
2188660f2d
* CONFIG_LSF should be set on i686, otherwise ext4 can't even mount
...
filesystems created by mkfs.ext4 with default options.
svn path=/nixpkgs/trunk/; revision=13777
2009-01-15 15:11:14 +00:00
739ef5e82a
* Various hacks needed to get the NVIDIA driver to build on
...
Linux 2.6.28. In particular the arch-specific headers
are in a different place now. (I'd like to do "make
headers_install", but it doesn't install all the headers
that are needed to build external kernel modules. What
a mess.)
* Add Linux 2.6.28 to the channel.
svn path=/nixpkgs/trunk/; revision=13775
2009-01-15 15:00:30 +00:00
Mathijs Kwik
David Guibert
Michael Raskin
Lluís Batlle i Rossell
Eelco Dolstra
Shea Levy
Vladimír Čunát
aszlig
Peter Simons
Rickard Nilsson
Lluis Batlle
Lluís Batlle i Rossell
Nicolas Pierron
Yury G. Kudryashov
Florian Friesdorf
Arie Middelkoop
Ludovic Courtès
Ludovic Stordeur
Evgeny Egorochkin