Fixes problems such as:
systemd[1]: Failed to put bus name to hashmap: File exists
systemd[1]: dbus-org.freedesktop.nm-dispatcher.service: Two services allocated for the same bus name org.freedesktop.nm_dispatcher, refusing operation.
Problem is that systemd treats symlinks to files outside the service
path differently, causing our old workaround to look like two separate services.
These symlinks are intended to be a means for manually emulating
the behavior of the `Alias=` directive in these services.
Unfortunately even making these symlinks relative isn't enough,
since they don't make it to where it matters--
that only makes the links in /etc/static/systemd/system/*
relative, with systemd still being shown non-relative links
in /etc/systemd/system/*.
To fix this, drop all of this at the package level
and instead simply specify the aliases in the NixOS modules.
Also handle the same for modemmanager,
since the networkmanager NixOS module also handles that.
During the last update, `hydra-notify` was rewritten as a daemon which
listens to postgresql notifications for each build[1]. The module
uses the `hydra-notify.service` unit from upstream's Hydra module and
the VM test ensures that email notifications are sent properly.
Also updated `hydra-init.service` to install `pg_trgm` on a local
database if needed[2].
[1] c7861b85c4
[2] 8a0a5ec3a3
Fixes problems such as:
systemd[1]: Failed to put bus name to hashmap: File exists
systemd[1]: dbus-org.freedesktop.nm-dispatcher.service: Two services allocated for the same bus name org.freedesktop.nm_dispatcher, refusing operation.
Problem is that systemd treats symlinks to files outside the service
path differently, causing our old workaround to look like two separate services.
These symlinks are intended to be a means for manually emulating
the behavior of the `Alias=` directive in these services.
Unfortunately even making these symlinks relative isn't enough,
since they don't make it to where it matters--
that only makes the links in /etc/static/systemd/system/*
relative, with systemd still being shown non-relative links
in /etc/systemd/system/*.
To fix this, drop all of this at the package level
and instead simply specify the aliases in the NixOS modules.
Also handle the same for modemmanager,
since the networkmanager NixOS module also handles that.
IE6 is long gone and this directive is not useful anymore. We can
spare a few CPU cycles (and maybe skip some bugs) by not trying to
disable gzip for MSIE6.
This option was added in 6336048c58 but it
is essentially a complete duplicate of the existing cfg.servers and
there seems to be no reason to keep maintaining it.
Furthermore, it requires annoying duplication if you try to do option
merging, e.g. merging in sets into your configuration.nix that add
`services.chrony.initstepslew` options will overwrite the servers option
unless you keep it, but that means you just have to duplicate
config.networking.timeServers again anyway which is an implementation
detail!
Signed-off-by: Austin Seipp <aseipp@pobox.com>
'iburst' allows chrony to make very quick adjustments to the clock by
doing a couple rapid measurements outside of the default 'minpoll'
option. This helps improve rapid time adjustment at boot, and is enabled
by default.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This is reckless, ill-advised, pointless, and I will be scorned for it,
but it makes me feel a lot better.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
When mailman-web restarts, it removes the generated "static" directory. This
breaks a currently running httpd process, which needs a re-start, too, to
obtain a new handle for the newly generated path.
Rules are a translation of what's done in the
GDM module and adjustments based of looking at
Arch Linux's configuration and upstream's.
A side effect of this change is that gnome-keyring
and kwallet modules should work as expected when in-
cluded.
Fixes#64259#62045
Adds the ability to make any parameter specified in extraConfig secret
by defining it an attrset containing the attr _secret, which in turn
is a path to a file containing the actual secret.
Use the postgresql module to provision a local db (if
databaseCreateLocally is true) instead of doing this locally.
Switch to using the local unix socket for db connections by default;
this is needed since dbs created by the postgresql module only support
peer authentication.
Instead of running the rake tasks db:schema:load, db:migrate and
db:seed_fu, run gitlab:db:configure, which in turn runs these tasks
when needed.
Solves issue #53852 for gitlab.
Add support for storing secrets in files outside the nix store, since
files in the nix store are world-readable and secrets therefore can't
be stored safely there.
The old string options are kept, since they can potentially be handy
for testing purposes, but their descriptions now state that they
shouldn't be used in production. The manual section is updated to use
the file options rather than the string options and the tests now test
both.
* remove kinetic
* release note
* add johanot as maintainer
nixos/ceph: create option for mgr_module_path
- since the upstream default is no longer correct in v14
* fix module, default location for libexec has changed
* ceph: fix test
* maintain only one version
* ceph-client: init
* include ceph-volume python tool in output
nixos/ceph: extraConfig, fix test, wait for ceph-mgr to become active
* run ceph with disk group permission
* add extraConfig option for the global section
needed per cluster
* clear up how ceph.conf is generated
* fix ceph testcase
Since we moved gsettings-desktop-schemas to top-level, gnome3.glib-networking was the same as glib-networking.
We could try to make the top-level variant not depend on gsettings-desktop-schemas again but that is probably
pointless, as the dependency is rather small compared to things like libproxy. Instead, we will just drop
the package in gnome3 attr set and always rely on the top-level expression.
Since https://github.com/NixOS/nixpkgs/pull/61321, local-fs.target is
part of sysinit.target again, meaning units without
DefaultDependencies=no will automatically depend on it, and the manual
set dependencies can be dropped.
The redis module currently fails to start up, most likely due to running
a chown as non-root in preStart.
While at it, I hardcoded it to use systemd's StateDirectory and
DynamicUser to manage directory permissions, removed the unused
appendOnlyFilename option, and the pidFile option.
We properly tell redis now it's daemonized, and it'll use notify support
to signal readiness.
Adds:
- gnome-color-manager
- services.avahi
It appears that GeoClue requires its daemon and IIRC has
been default enabled in other distros for a while.
- orca
It's the default screen-reader.
Any system uid will do, so we let the system allocate
one for us. The 'mailman' group is gone entirely since
we don't need it. Users who wish to run the 'mailman'
administration utility can do so via 'sudo':
$ sudo -u mailman mailman info
Also, simplify the syntax of our user.users entry to
rely on an attribute set rather than a list.
* nixos/acme: Fix ordering of cert requests
When subsequent certificates would be added, they would
not wake up nginx correctly due to target units only being triggered
once. We now added more fine-grained systemd dependencies to make sure
nginx always is aware of new certificates and doesn't restart too early
resulting in a crash.
Furthermore, the acme module has been refactored. Mostly to get
rid of the deprecated PermissionStartOnly systemd options which were
deprecated. Below is a summary of changes made.
* Use SERVICE_RESULT to determine status
This was added in systemd v232. we don't have to keep track
of the EXITCODE ourselves anymore.
* Add regression test for requesting mutliple domains
* Deprecate 'directory' option
We now use systemd's StateDirectory option to manage
create and permissions of the acme state directory.
* The webroot is created using a systemd.tmpfiles.rules rule
instead of the preStart script.
* Depend on certs directly
By getting rid of the target units, we make sure ordering
is correct in the case that you add new certs after already
having deployed some.
Reason it broke before: acme-certificates.target would
be in active state, and if you then add a new cert, it
would still be active and hence nginx would restart
without even requesting a new cert. Not good! We
make the dependencies more fine-grained now. this should fix that
* Remove activationDelay option
It complicated the code a lot, and is rather arbitrary. What if
your activation script takes more than activationDelay seconds?
Instead, one should use systemd dependencies to make sure some
action happens before setting the certificate live.
e.g. If you want to wait until your cert is published in DNS DANE /
TLSA, you could create a unit that blocks until it appears in DNS:
```
RequiredBy=acme-${cert}.service
After=acme-${cert}.service
ExecStart=publish-wait-for-dns-script
```
The custom session script is always executed (when it exists). This change
passes the selected session script and select session name to the custom session
script, so that it can defer to the selected session script based on the value
of the selected session name.
The `keys.target` is used to indicate whether all NixOps keys were
successfully uploaded on an unattended reboot. However this can cause
startup issues e.g. with NixOS containers (see #67265) and can block
boots even though this might not be needed (e.g. with a dovecot2
instance running that doesn't need any of the NixOps keys).
As described in the NixOps manual[1], dependencies to keys should be
defined like this now:
``` nix
{
systemd.services.myservice = {
after = [ "secret-key.service" ];
wants = [ "secret-key.service" ];
};
}
```
However I'd leave the issue open until it's discussed whether or not to
keep `keys.target` in `nixpkgs`.
[1] https://nixos.org/nixops/manual/#idm140737322342384
This introduces the following options under the services.gnome3 namespace:
* core-os-services.enable
* core-shell.enable
* core-utilities.enable
* games.enable
The first three are all default enabled by gnome3.enable
and their purpose is to make gnome3 more flexable for users
usecases. In the case of core-utilities and games, it allows
users to easily switch on the default gnome3 applications
and games packages. Previously we had lists in gnome-3/default.nix
but they weren't visible to the user. By having options we have
generated documentation and an interface.
For some reason nm-applet has to be running for an authentication
dialog to be spawned by wingpanel-indicator-network.
This also fixes storing NetworkManager secrets in the keyring, but this
is still broken because we lack the proper PAM configuration.
When NetworkManager is configured to not manage all interfaces, it's
perfectly fine to have the rest be managed by the standard nixos
wireless scripts.
I use
networking.networkmanager.unmanaged = [
"*" "except:type:wwan" "except:type:gsm"
];
to control everything using networking.wireless except for the mobile
LTE modem which only works with NetworkManager.
Fix the following error when opening Background panel in GNOME Settings:
URI '/nix/store/…-simple-dark-gray-2016-02-19/share/artwork/gnome/nix-wallpaper-simple-dark-gray.png' is invalid
This module obsoletes services.gnome3.gnome-terminal-server
as that's a confusing option for users, and sounds internal.
It's much simpler to have a gnome-terminal module.
* nginx: expose generated config and allow nginx reloads
Fixes: https://github.com/NixOS/nixpkgs/issues/15906
Another try was done, but not yet merged in https://github.com/NixOS/nixpkgs/pull/24476
This add 2 new features: ability to review generated Nginx config
(and NixOS has sophisticated generation!) and reloading
of nginx on config changes. This preserves nginx restart on package
updates.
I've modified nginx test to use this new feature and check reload/restart
behavior.
* rename to enableReload
* add sleep(1) in ETag test (race condition) and rewrite rebuild-switch using `nesting.clone`
* Regenerated all patches for 1.4.2 and resolved
any conflicts.
* fix-test-paths.patch doesn't copy the whole locale archive
because we have C.UTF8 now.
* nixos/flatpak creates a Flatpak system helper user
Change introduced in 1.3.2.
Changes:
See https://github.com/flatpak/flatpak/releases/tag/1.3.1 through
1.4.2.
This allows xkbvalidate to be compiled via Clang and also has a few
other portability improvements, eg. it now can even be compiled on OS X,
even though it's probably not needed there.
In addition, I changed the binary name so that it matches the package
name.
I'm merging this in right now, because there is only the xserver NixOS
module where this is used, so the risk of a catastrophic breakage is
very low.
Checks and build done by ofborg also ran successfully and I also did a
few local tests (eg. running via valgrind to avoid leaks) to make sure
it's still working properly.
So far, the output binary has been just "validate", which is quite a
very generic name and doesn't match the package name.
Even though I highly doubt that this program will ever be used outside
of NixOS modules, it's nevertheless less confusing to have a consistent
naming.
Signed-off-by: aszlig <aszlig@nix.build>
The old `cp` suffers from a permission issue on the 2nd start of the
service. The files were copied from the read-only nix store. On the 2nd
start of the service the `cp` failed.
The new version force creates a symlink which does not suffer from this.
Prometheus2 does no longer support the command-line flag to specify
an alertmanager. Instead it now supports both service discovery and
configuration of alertmanagers in the alerting config section.
Simply mapping the previous option to an entry in the new alertmanagers
section is not enough to allow for complete configurations of an
alertmanager.
Therefore the option alertmanagerURL is no longer used and instead
a full alertmanager configuration is expected.
DynamicUser currently breaks the backup functionality provided by roon,
as the roon server cannot write to non-canonical directories and the
recycled UIDs/GIDs would make managing permissions for the directory
impossible. On top of that, it would break the ability to manage the
local music library files (as it would not be able to delete them).
When bluetooth is enabled, we install bluedevil, but
its applet cannot work without the qml components in
bluez-qt.
Superseedes #65440 that failed to address the issue.
The fix for #62874 introduced a race condition on startup: the postStart
commands that configure the firewall run concurrently with sshguard's
creation of the ipsets that the rules depend on. Unfortunately iptables
fails hard when referencing an ipset that doesn't exist, so this causes
non-deterministic crashlooping until sshguard wins the race.
This change fixes that race condition by always creating the ipset and
reconfiguring the firewall before starting sshguard, so that the order
of operations is always deterministic.
This change also cleans up the ipsets on sshguard shutdown, so that
removing sshguard from a running system doesn't leave state behind.
Fixes#65985.
For some reason it doesn't seem to load things in the cache directory
properly without this slash.
Looks like this regression may have been introduced in:
commit 19851ec1fc
nixos/zoneminder: Fix nginx config check
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Peter Hoeg <peter@hoeg.com>
Signed-off-by: William Casarin <jb55@jb55.com>
This adds a simple configuration for sending snapshots to a remote
system using zfs-replicate that ties into the autoSnapshot settings
already present in services.zfs.autoSnapshot.
The following configuration generates a systemd unit that doesn't
start.
```nix
{
services.syncthing = {
enable = true;
user = "my-user";
};
}
```
It fails with
```
systemd[1]: Started Syncthing service.
systemd[6745]: syncthing.service: Failed to determine group credentials: No such process
systemd[6745]: syncthing.service: Failed at step GROUP spawning /nix/store/n1ydz3i08nqp1ajc50ycy1zribmphqc9-syncthing-1.1.4-bin/bin/syncthing: No such process
systemd[1]: syncthing.service: Main process exited, code=exited, status=216/GROUP
systemd[1]: syncthing.service: Failed with result 'exit-code'.
```
This is due to the fact that `syncthing` group (default) is not
created if the user is overridden.
Add a separate check for setting up the default group, so that
user/group are created independently.
Upstream switched to a different type of ipset table, whereas we
create ipset in post-start which overrides upstream, and renders
sshguard ineffective.
Remove ipset creation from post-start, and let it get automatically
by upstream script (sshg-fw-ipset) as part of startup
The default for logFile is /var/log/couchdb.log, and the tmpfile rules chown
${dirOf cfg.logFile}, which is just /var/log, to couchdb:couchdb.
This was found by Edes' report on IRC, which looked like
Detected unsafe path transition /var/log → /var/log/journal during canonicalization of /var/log/journal
While this bug has been present since the initial couchdb module in
62438c09f7 by @garbas, this wasn't a
problem, because the initial module only created and chowned /var/log
if it didn't exist yet, which can't occur because this gets created in
the initial phases of NixOS startup.
However with the recent move from manual preStart chown scripts to
systemd.tmpfiles.rules in 062efe018d (#59389),
this chown is suddenly running unconditionally at every system
activation, therefore triggering the above error.
Regression I caused with 3944aa051c, sorry
for this! The Nextcloud installer broke back then because
`trusted_domains` was an empty value by default (a.k.a an empty array)
which seemed to break the config merger of Nextcloud as Nextcloud
doesn't do recursive merging and now no domain was trusted because of
that, hence Nextcloud was unreachable for the `curl` call.
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes#49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
Since version 3.0 all allowed IPs and subnets are exposed by the
exporter. With `-s` set on the CLI, instead of a comma-separated list,
each allowed IP and subnet will be in a single field with the schema
`allowed_ip_<index>`.
Introduce a new .plasma5.phononBackend option. Default value
"gstreamer" installs the same packages as before. "vlc" installs
only the vlc phonon backend.
In commit d43dc68db3, @Mic92 split the
rootpw option to allow specifying it in a file kept outside the Nix
store, as an alternative to specifying the password directly in the
config.
Prior to that, rootpw's type was `str`, but in order to allow both
alternatives, it had to become `nullOr str` with a default of `null`. So
I can see why this assertion, that either rootpw or rootpwFile are
specified, makes sense to add here.
However, these options aren't used if the configDir option is set, so as
written this assertion breaks valid configurations, including the
configuration used by nixos/tests/ldap.nix.
So this patch fixes the assertion so that it doesn't fire if configDir
is set.
The old open-source driver for AMD/ATI GPUs is commonly known as "radeon"
despite the historical package name xf86-video-ati. For example it presents
itself as RADEON in the Xorg log. So adding "radeon" to videoDrivers should
work.
Also changed the docs for the videoDrivers option to use "radeon" in the
default value instead of "ati".
Fixes#37917
This is a refactor of how resolvconf is managed on NixOS. We split it
into a separate service which is enabled internally depending on whether
we want /etc/resolv.conf to be managed by it. Various services now take
advantage of those configuration options.
We also now use systemd instead of activation scripts to update
resolv.conf.
NetworkManager now uses the right option for rc-manager DNS
automatically, so the configuration option shouldn't be exposed.
The new option services.postfix.localRecipients allows
configuring the postfix option 'local_recipient_maps'. When
set to a list of user names (or patterns), that map
effectively replaces the lookup in the system's user
database that's used by default to determine which local
users are valid.
This option is useful to explicitly set local users that are
allowed to receive e-mail from the outside world. For local
injection i.e. via the 'sendmail' command this option has no
effect.
We were already creating a group for the user under which to run syncthing but
we were defaulting to running as `nogroup`.
Additionally, use `install` instead of multiple calls to mkdir/cp/chown.
NixOS usually needs nscd just to have a single place where
LD_LIBRARY_PATH can be set to include all NSS modules, but nscd is also
useful if some of the NSS modules need to read files which are only
accessible by root.
For example, nixos/modules/config/ldap.nix needs this when
users.ldap.enable = true;
users.ldap.daemon.enable = false;
and users.ldap.bind.passwordFile exists. In that case, the module
creates an /etc/ldap.conf which is only readable by root, but which the
NSS module needs to read in order to find out what LDAP server to
connect to and with what credentials.
If nscd is started as root and configured with the server-user option in
nscd.conf, then it gives each NSS module the opportunity to initialize
itself before dropping privileges. The initialization happens in the
glibc-internal __nss_disable_nscd function, which pre-loads all the
configured NSS modules for passwd, group, hosts, and services (but not
netgroup for some reason?) and, for each loaded module, calls an init
function if one is defined. After that finishes, nscd's main() calls
nscd_init() which ends by calling finish_drop_privileges().
There are provisions in systemd for using DynamicUser with a service
which needs to drop privileges itself, so this patch does that.
Until now the startup failed with an error like this:
```
com.github.joschi.jadconfig.ValidationException: Parent path /var/lib/graylog/server for Node ID file at /var/lib/graylog/server/node-id is not a directory
```
This happens since `graylog.service` ensures that `/var/lib/graylog`
exists, however it doesn't take care of the directory for
`cfg.nodeIdFile`.
Thanks to @arianvp for pointing out that when DynamicUser is true,
systemd defaults the value of User to be the name of the unit, which in
this case is already "nscd".
These options were being set to the same value as the defaults that are
hardcoded in nscd. Delete them so it's clear which settings are actually
important for NixOS.
One exception is `threads 1`, which is different from the built-in
default of 4. However, both values are equivalent because nscd forces
the number of threads to be at least as many as the number of kinds of
databases it supports, which is 5.
nscd doesn't create any files outside of /run/nscd unless the nscd.conf
"persistent" option is used, which we don't do by default. Therefore it
doesn't matter what UID/GID we run this service as, so long as it isn't
shared with any other running processes.
/run/nscd does need to be owned by the same UID that the service is
running as, but systemd takes care of that for us thanks to the
RuntimeDirectory directive.
If someone wants to turn on the "persistent" option, they need to
manually configure users.users.nscd and systemd.tmpfiles.rules so that
/var/db/nscd is owned by the same user that nscd runs as.
In an all-defaults boot.isContainer configuration of NixOS, this removes
the only user which did not have a pre-assigned UID.
Previously this module created both /var/db/nscd and /run/nscd using
shell commands in a preStart script. Note that both of these paths are
hard-coded in the nscd source. (Well, the latter is actually
/var/run/nscd but /var/run is a symlink to /run so it works out the
same.)
/var/db/nscd is only used if the nscd.conf "persistent" option is turned
on for one or more databases, which it is not in our default config
file. I'm not even sure persistent mode can work under systemd, since
`nscd --shutdown` is not synchronous so systemd will always
unceremoniously kill nscd without reliably giving it time to mark the
databases as unused. Nonetheless, if someone wants to use that option,
they can ensure the directory exists using systemd.tmpfiles.rules.
systemd can create /run/nscd for us with the RuntimeDirectory directive,
with the added benefit of causing systemd to delete the directory on
service stop or restart. The default value of RuntimeDirectoryMode is
755, the same as the mode which this module was using before.
I don't think the `rm -f /run/nscd/nscd.pid` was necessary after NixOS
switched to systemd and used its PIDFile directive, because systemd
deletes the specified file after the service stops, and because the file
can't persist across reboots since /run is a tmpfs. Even if the file
still exists when nscd starts, it's only a problem if the pid it
contains has been reused by another process, which is unlikely. Anyway,
this change makes that deletion even less necessary, because now systemd
deletes the entire /run/nscd directory when the service stops.
This postStart step was introduced on 2014-04-24 with the comment that
"Nscd forks into the background before it's ready to accept
connections."
However, that was fixed upstream almost two months earlier, on
2014-03-03, with the comment that "This, along with setting the nscd
service type to forking in its systemd configuration file, allows
systemd to be certain that the nscd service is ready and is accepting
connections."
The fix was released several months later in glibc 2.20, which was
merged in NixOS sometime before 15.09, so it certainly should be safe to
remove this workaround by now.
Add an option to set the rc-manager parameter in NetworkManager.conf,
which controls how NetworkManager handles resolv.conf. This sets the
default rc-manager to "resolvconf", which solves #61490. It
additionally allows the user to change rc-manager without interference
from configuration activations.
We might be inside a NixOS container on a non-NixOS host, so instead of not
running at all inside a container, check if the nix-daemon socket is writable as
it will tell us if the store is managed from here or outside.
Fixes#63578
This commit adds new options to the Deluge service:
- Allow configuration of the user/group which runs the deluged daemon.
- Allow configuration of the user/group which runs the deluge web
daemon.
- Allow opening firewall for the deluge web daemon.
The override that builds the custom python for integrations-core was
overriding python, but pythonPackages was still being inherited from a
call to `datadog-integrations-core {}`, causing
service.datadog-agent.extraIntegrations to be ignored.
This commit adds new configuration options to the Lidarr module that
allows configuration of the user and group that Lidarr runs as; and to
open the firewall for the Lidarr port.
There are many support questions when people add a new binary cache
and they suddenly lose nixos substitutions.
Most of the users want to keep that, so we're doing a breaking change.
Previously to disable all binary caches one had to do:
nix.binaryCache = [];
Now the same is possible via:
nix.binaryCache = lib.mkForce;
Applies OpenWRT's noscan patch to hostapd and the relevant option to
the hostapd module.
This noscan patch adds a new `noscan` option allowing us to create
some overlapping BSSs in HT40+/- mode.
Note: this option is disabled by default, we leave this up to the end
user whether it should be enabled or not.
Not being able to create those overlapping BSSs is basically
preventing us to use 802.11n in any urban area where chances to
overlap with another SSID are extremely high.
The patch we are using is a courtesy of the openwrt team and is
applied to the defaul hostapd package in both OpenWRT and Archlinux.
This is just usbguard without the Qt GUI that brings in Qt dependencies.
Remove pandoc to reduce closure size. The usbguard build appears to
use it only for spell checking.
Remove asciidoctor because 0.7.1 switched to asciidoc. But don't add
a dependency on asciidoc, because that causes the build fails on
external DTDs.
