Bazel computes the default value of output_user_root before parsing the
flag[0]. The computation of the default value involves getting the $USER
from the environment. I don't have that variable when building with
sandbox enabled.
[0]: 9323c57607/src/main/cpp/startup_options.cc (L123-L124)
Create a many-layered Docker Image.
Implements much less than buildImage:
- Doesn't support specific uids/gids
- Doesn't support runninng commands after building
- Doesn't require qemu
- Doesn't create mutable copies of the files in the path
- Doesn't support parent images
If you want those feature, I recommend using buildLayeredImage as an
input to buildImage.
Notably, it does support:
- Caching low level, common paths based on a graph traversial
algorithm, see referencesByPopularity in
0a80233487993256e811f566b1c80a40394c03d6
- Configurable number of layers. If you're not using AUFS or not
extending the image, you can specify a larger number of layers at
build time:
pkgs.dockerTools.buildLayeredImage {
name = "hello";
maxLayers = 128;
config.Cmd = [ "${pkgs.gitFull}/bin/git" ];
};
- Parallelized creation of the layers, improving build speed.
- The contents of the image includes the closure of the configuration,
so you don't have to specify paths in contents and config.
With buildImage, paths referred to by the config were not included
automatically in the image. Thus, if you wanted to call Git, you
had to specify it twice:
pkgs.dockerTools.buildImage {
name = "hello";
contents = [ pkgs.gitFull ];
config.Cmd = [ "${pkgs.gitFull}/bin/git" ];
};
buildLayeredImage on the other hand includes the runtime closure of
the config when calculating the contents of the image:
pkgs.dockerTools.buildImage {
name = "hello";
config.Cmd = [ "${pkgs.gitFull}/bin/git" ];
};
Minor Problems
- If any of the store paths change, every layer will be rebuilt in
the nix-build. However, beacuse the layers are bit-for-bit
reproducable, when these images are loaded in to Docker they will
match existing layers and not be imported or uploaded twice.
Common Questions
- Aren't Docker layers ordered?
No. People who have used a Dockerfile before assume Docker's
Layers are inherently ordered. However, this is not true -- Docker
layers are content-addressable and are not explicitly layered until
they are composed in to an Image.
- What happens if I have more than maxLayers of store paths?
The first (maxLayers-2) most "popular" paths will have their own
individual layers, then layer #(maxLayers-1) will contain all the
remaining "unpopular" paths, and finally layer #(maxLayers) will
contain the Image configuration.
Using a simple algorithm, convert the references to a path in to a
sorted list of dependent paths based on how often they're referenced
and how deep in the tree they live. Equally-"popular" paths are then
sorted by name.
The existing writeReferencesToFile prints the paths in a simple
ascii-based sorting of the paths.
Sorting the paths by graph improves the chances that the difference
between two builds appear near the end of the list, instead of near
the beginning. This makes a difference for Nix builds which export a
closure for another program to consume, if that program implements its
own level of binary diffing.
For an example, Docker Images. If each store path is a separate layer
then Docker Images can be very efficiently transfered between systems,
and we get very good cache reuse between images built with the same
version of Nixpkgs. However, since Docker only reliably supports a
small number of layers (42) it is important to pick the individual
layers carefully. By storing very popular store paths in the first 40
layers, we improve the chances that the next Docker image will share
many of those layers.*
Given the dependency tree:
A - B - C - D -\
\ \ \ \
\ \ \ \
\ \ - E ---- F
\- G
Nodes which have multiple references are duplicated:
A - B - C - D - F
\ \ \
\ \ \- E - F
\ \
\ \- E - F
\
\- G
Each leaf node is now replaced by a counter defaulted to 1:
A - B - C - D - (F:1)
\ \ \
\ \ \- E - (F:1)
\ \
\ \- E - (F:1)
\
\- (G:1)
Then each leaf counter is merged with its parent node, replacing the
parent node with a counter of 1, and each existing counter being
incremented by 1. That is to say `- D - (F:1)` becomes `- (D:1, F:2)`:
A - B - C - (D:1, F:2)
\ \ \
\ \ \- (E:1, F:2)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
Then each leaf counter is merged with its parent node again, merging
any counters, then incrementing each:
A - B - (C:1, D:2, E:2, F:5)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
And again:
A - (B:1, C:2, D:3, E:4, F:8)
\
\- (G:1)
And again:
(A:1, B:2, C:3, D:4, E:5, F:9, G:2)
and then paths have the following "popularity":
A 1
B 2
C 3
D 4
E 5
F 9
G 2
and the popularity contest would result in the paths being printed as:
F
E
D
C
B
G
A
* Note: People who have used a Dockerfile before assume Docker's
Layers are inherently ordered. However, this is not true -- Docker
layers are content-addressable and are not explicitly layered until
they are composed in to an Image.
This causes problems for packages built using a bootstrap stdenv,
resulting in references to /bin/sh or even bootstrap-tools. The darwin
stdenv is much stricter about what requisites/references are allowed but
using /bin/sh on linux is also undesirable.
eg. https://hydra.nixos.org/build/81754896
$ nix-build -A xz
$ head -n1 result-bin/bin/xzdiff
#!/nix/store/yvc7kmw98kq547bnqn1afgyxm8mxdwhp-bootstrap-tools/bin/sh
This reverts commit f06942327a.
This reverts commit f777d2b719.
cc #34409
This breaks evaluation of the tested job:
attribute 'diskInterface' missing, at /nix/store/5k9kk52bv6zsvsyyvpxhm8xmwyn2yjvx-source/pkgs/build-support/vm/default.nix:316:24
This includes the initialy commit was done by @Mic92 plus a few fixes
from my side. So essentially this avoids patching statically linked
executables and also speeds up searching for ELF files altogether.
I've tested this by comparing the outputs of all the derivations which
make use of this hook using the following Nix expression:
let
getPackagesForRev = rev: with import (builtins.fetchGit {
url = ./.;
inherit rev;
}) { config.allowUnfree = true; }; [
cups-kyodialog3 elasticsearch franz gurobi javacard-devkit
masterpdfeditor maxx oracle-instantclient powershell reaper
teamviewer unixODBCDrivers.msodbcsql17 virtlyst wavebox zoom-us
];
pkgs = import <nixpkgs> {};
baseRev = "ef764eb0d8314b81a012dae04642b4766199956d";
in pkgs.runCommand "diff-contents" {
chset = pkgs.lib.zipListsWith (old: new: pkgs.runCommand "diff" {
inherit old new;
nativeBuildInputs = [ pkgs.nukeReferences ];
} ''
mkdir -p "''${NIX_STORE#/}"
cp --no-preserve=all -r "$old" "''${NIX_STORE#/}"
cp --no-preserve=all -r "$new" "''${NIX_STORE#/}"
find "''${old#/}" "''${new#/}" \
\( -type f -exec nuke-refs {} + \) -o \( -type l -delete \)
mkdir "$out"
echo "$old" > "$out/old-path"
echo "$new" > "$out/new-path"
diff -Nur "''${old#/}" "''${new#/}" > "$out/diff" || :
'') (getPackagesForRev baseRev) (getPackagesForRev "");
} ''
err=0
for c in $chset; do
if [ -s "$c/diff" ]; then
echo "$(< "$c/old-path") -> $(< "$c/new-path")" \
"differs, report: $c/diff" >&2
err=1
fi
done
[ $err -eq 0 ] && touch "$out"
''
With these changes there is only one derivation which has altered
contents, which is "franz". However the reason why it has differing
contents is not directly because of the autoPatchelfHook changes, but
because the "env-vars" file from the builder is in
"$out/opt/franz/env-vars" (Cc: @gnidorah) and we now have different
contents for NIX_CFLAGS_COMPILE and other environment variables.
I also tested this against a random static binary and the hook no longer
tries to patch it.
Merges: #47222
The "maxx" package recursively runs isExecutable on a bunch of files and
since the change to use "readelf" instead of "file" a lot of errors like
this one are printed during build:
readelf: Error: Not an ELF file - it has the wrong magic bytes at the
start
While the isExecutable was never meant to be used outside of the
autoPatchelfHook, it's still a good idea to silence the errors because
whenever readelf fails, it clearly indicates that the file in question
is not a valid ELF file.
Signed-off-by: aszlig <aszlig@nix.build>
If the ELF file is not an executable, we do not get a PT_INTERP section,
because after all, it's a *shared* library.
So instead of checking for PT_INTERP (to avoid statically linked
executables) for all ELF files, we add another check to see if it's an
executable and *only* skip it when it is and there's no PT_INTERP.
Signed-off-by: aszlig <aszlig@nix.build>
The `overrideScope` bound by `makeScope` (via special `callPackage`)
took an override in the form `super: self { … }`. But this is
dangerously close to the `self: super { … }` form used by *everything*
else, even other definitions of `overrideScope`! Since that
implementation did not even share any code either until I changed it
recently in 3cf43547f4, this inconsistency
is almost certainly an oversight and not intentional.
Unfortunately, just as the inconstency is hard to debug if one just
assumes the conventional order, any sudden fix would break existing
overrides in the same hard-to-debug way. So instead of changing the
definition a new `overrideScope'` with the conventional order is added,
and old `overrideScope` deprecated with a warning saying to use
`overrideScope'` instead. That will hopefully get people to stop using
`overrideScope`, freeing our hand to change or remove it in the future.
02c09e0171 (NixOS/nixpkgs#44558) was reverted in
c981787db9 but, as it turns out, it fixed an issue
I didn't know about at the time: the values of `propagateDoc` options were
(and now again are) inconsistent with the underlying things those wrappers wrap
(see NixOS/nixpkgs#46119), which was (and now is) likely to produce more instances
of NixOS/nixpkgs#43547, if not now, then eventually as stdenv changes.
This patch (which is a simplified version of the original reverted patch) is the
simplest solution to this whole thing: it forces wrappers to directly inspect the
outputs of the things they are wrapping instead of making stdenv guess the correct
values.
Because dates are an impurity, by default buildImage will use a static
date of one second past the UNIX Epoch. This can be a bit frustrating
when listing docker images in the CLI:
$ docker image list
REPOSITORY TAG IMAGE ID CREATED SIZE
hello latest 08c791c7846e 48 years ago 25.2MB
If you want to trade the purity for a better user experience, you can
set created to now.
pkgs.dockerTools.buildImage {
name = "hello";
tag = "latest";
created = "now";
contents = pkgs.hello;
config.Cmd = [ "/bin/hello" ];
}
and now the Docker CLI will display a reasonable date and sort the
images as expected:
$ docker image list
REPOSITORY TAG IMAGE ID CREATED SIZE
hello latest de2bf4786de6 About a minute ago 25.2MB
This commit adds test based on real-world crates (brotli).
There were a few more edge cases that were missing beforehand. Also it
turned out that we can get rid of the `finalBins` list since that will
now be handled during runtime.
The build expression got quiet large over time and to make it a bit
easier to grasp the different scripts involved in the build are now
separated from the nix file.
Cargo has a few odd (old) ways of picking source files if the `bin.path`
attribute isn't given in the Cargo.toml. This commit adds support for
some of those. The previous behaviour always defaulted to `src/main.rs`
which was not always the right choice.
Since there is look-ahead into the unpacked sources before running the
actual builder the path selection logic has to be embedded within the
build script.
`buildRustCrate` currently supports two ways of running building
binaries when processing a crate:
- Explicit definition of all the binaries (& optionally the paths to
their respective `main.rs`) and,
- if not binary was explictly configured all files matching the patterns
`src/main.rs`, `src/bin/*.rs`.
When the explicit list is given without path information paths are now
being picked from a list of candidates. The first match wins. The order
is the same as within the cargo compatibility code.
If the crate does not provide any libraries the path `src/{bin_name}.rs`
is also considered.
All underscores within the binary names are translated into dashes (`-`)
before the lookups are made. This seems to be a common convention.
Previously the Release.xz URL would show up with a new hash whenever
debian releases an update. By using archive.org we should have a stable
source for those. I wasn't able to find the equivalent in the debian
world. Maybe they don't keep all the different Release files around..
By setting useRealVendorConfig explicitly to true, the actual (slightly
modified) config generated by cargo-vendor is used.
This solves a problem, where the static vendor config in
pkgs/build-support/rust/default.nix would not sufficiently replace all
crates Cargo is looking for.
As useRealVendorConfig (and writeVendorConfig in fetchcargo) default to
false, there should be no breakage in existing cargoSha256 hashes.
Nethertheless, imho using this new feature should become standard. A
possible deprecation path could be:
- introduce this patch
- set useRealVendorConfig explicitly to false whereever cargoSha256 is
set but migration is not wanted yet.
- after some time, let writeVendorConfig default to true
- when useRealVendorConfig is true everywhere cargoSha256 is set and
enough time is passed, `assert cargoVendorDir == null ->
useRealVendorConfig;`, remove old behaviour
- after some time, remove all appearences of useRealVendorConfig and the
parameter itself
Introduce a `skawarePackages.buildPackage` function that contains the
common setup, removing a lot of duplication.
In particular, we require that the build directory has to be empty
after the `fixupPhase`, to make sure every relevant file is moved to
the outputs.
A next step would be to deduplicate the `configureFlags` attributes
and only require a `skawareInputs` field.
There's no reason `linkFarm` can't be used for symlinks in
subdirectories, except that currently it doesn't ensure the directory
of the link exists. This backwards-compatible change expands the utility
of the function.
This hopefully makes patchShebangs respect cross compilation. It
introduces the concept of the HOST_PATH. Nothing is ever executed on
it but instead used as a way to get the proper path using ‘command
-v’. Needs more testing.
/cc @ericson2314 @dtzwill
Fixes#33956Fixes#21138
* substitute(): --subst-var was silently coercing to "" if the variable does not exist.
* libffi: simplify using `checkInputs`
* pythonPackges.hypothesis, pythonPackages.pytest: simpify dependency cycle fix
* utillinux: 2.32 -> 2.32.1
https://lkml.org/lkml/2018/7/16/532
* busybox: 1.29.0 -> 1.29.1
* bind: 9.12.1-P2 -> 9.12.2
https://ftp.isc.org/isc/bind9/9.12.2/RELEASE-NOTES-bind-9.12.2.html
* curl: 7.60.0 -> 7.61.0
* gvfs: make tests run, but disable
* ilmbase: disable tests on i686. Spooky!
* mdds: fix tests
* git: disable checks as tests are run in installcheck
* ruby: disable tests
* libcommuni: disable checks as tests are run in installcheck
* librdf: make tests run, but disable
* neon, neon_0_29: make tests run, but disable
* pciutils: 3.6.0 -> 3.6.1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools. This update was made based on information from https://repology.org/metapackage/pciutils/versions.
* mesa: more include fixes
mostly from void-linux (thanks!)
* npth: 1.5 -> 1.6
minor bump
* boost167: Add lockfree next_prior patch
* stdenv: cleanup darwin bootstrapping
Also gets rid of the full python and some of it's dependencies in the
stdenv build closure.
* Revert "pciutils: use standardized equivalent for canonicalize_file_name"
This reverts commit f8db20fb3a.
Patching should no longer be needed with 3.6.1.
* binutils-wrapper: Try to avoid adding unnecessary -L flags
(cherry picked from commit f3758258b8895508475caf83e92bfb236a27ceb9)
Signed-off-by: Domen Kožar <domen@dev.si>
* libffi: don't check on darwin
libffi usages in stdenv broken darwin. We need to disable doCheck for that case.
* "rm $out/share/icons/hicolor/icon-theme.cache" -> hicolor-icon-theme setup-hook
* python.pkgs.pytest: setupHook to prevent creation of .pytest-cache folder, fixes#40273
When `py.test` was run with a folder as argument, it would not only
search for tests in that folder, but also create a .pytest-cache folder.
Not only is this state we don't want, but it was also causing
collisions.
* parity-ui: fix after merge
* python.pkgs.pytest-flake8: disable test, fix build
* Revert "meson: 0.46.1 -> 0.47.0"
With meson 0.47.0 (or 0.47.1, or git)
things are very wrong re:rpath handling
resulting in at best missing libs but
even corrupt binaries :(.
When we run patchelf it masks the problem
by removing obviously busted paths.
Which is probably why this wasn't noticed immediately.
Unfortunately the binary already
has a long series of paths scribbled
in a space intended for a much smaller string;
in my testing it was something like
lengths were 67 with 300+ written to it.
I think we've reported the relevant issues upstream,
but unfortunately it appears our patches
are what introduces the overwrite/corruption
(by no longer being correct in what they assume)
This doesn't look so bad to fix but it's
not something I can spend more time on
at the moment.
--
Interestingly the overwritten string data
(because it is scribbled past the bounds)
remains in the binary and is why we're suddenly
seeing unexpected references in various builds
-- notably this is is the reason we're
seeing the "extra-utils" breakage
that entirely crippled NixOS on master
(and probably on staging before?).
Fixes#43650.
This reverts commit 305ac4dade.
(cherry picked from commit 273d68eff8f7b6cd4ebed3718e5078a0f43cb55d)
Signed-off-by: Domen Kožar <domen@dev.si>
package-build expects the recipe file name to match the Emacs package
name. `melpaBuild` takes an extra argument `ename` for the Emacs package
name (default: `pname`, the Nix package name) which is used to name the recipe
file.
Fixes: #43893
See also: #43609
This makes the command ‘nix-env -qa -f. --arg config '{skipAliases =
true;}'’ work in Nixpkgs.
Misc...
- qtikz: use libsForQt5.callPackage
This ensures we get the right poppler.
- rewrites:
docbook5_xsl -> docbook_xsl_ns
docbook_xml_xslt -> docbook_xsl
diffpdf: fixup
With the recent update of BusyBox to version 1.29.0 in
d6aa506e3b there is now a new dependency
on libresolv.
This now throws a runtime error when executing ash, eg. whenever we do
something like this:
nix-build -E 'with import ./. {}; vmTools.runInLinuxVM hello'
The resulting error will be:
.../ash: error while loading shared libraries: libresolv.so.2: cannot
open shared object file: No such file or directory
I tried to override BusyBox with enableStatic, but that still requires
parts of glibc:
Static linking against glibc, can't use --gc-sections
Trying libraries: crypt m resolv
Library crypt is not needed, excluding it
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Final link with: m resolv
In the long term maybe switching to a more minimal C library such as
musl would make more sense, but for now I just added libresolv.so to the
initrd which fixes the runtime error.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @rbvermaa
Signed-off-by: aszlig <aszlig@nix.build>
All package sets are simultaneously updated to accommodate changes to
package-build. Due to new restrictions in package-build, all packages using
`melpaBuild` must now provide a recipe file, even those packages which are not
included in upstream MELPA.
So far the runtimeDependencies variable has been rather useless unless
you also set dontPatchelf, because the patchelf setup hook ran *after*
the autoPatchelfHook and thus stripped off the additional RPATHs added
using runtimeDependencies.
I did this by moving the autoPatchelfHook to be run in postFixup instead
of fixupOutput, however I needed to replicate the for loop that runs the
hook on all outputs.
Until we have a way to influence order of execution for hooks I've
marked this with an XXX so that we can use fixupOutput again.
Tested this against all packages that use autoPatchelfHook using the
following and checking whether the output contains any errors concerning
shared libraries:
nix-build -E 'with import ./. { config.allowUnfree = true; };
runCommand "test-executables" {
drvs = [
masterpdfeditor franz zoom-us anydesk teamviewer maxx
oracle-instantclient cups-kyodialog3 virtlyst powershell
];
} "for i in $drvs; do for b in $i/bin/*; do \"$b\" || :; done; done"
'
Signed-off-by: aszlig <aszlig@nix.build>
Fixes: https://github.com/NixOS/nixpkgs/issues/43082
Cc: @Ericson2314
Since this is probably never the desired case and has led to actual
issues, see the comments at:
af1313e915
This might also happen when pulling a patch from GitHub or a similar web
interface without explicitly selecting the "raw" format.
Excludes and includes are implemented by passing the parameters to the
respective flags of `filterdiff`. Those were passed unescaped until now.
Since those flags expect patterns (similar to shell globs), something
like `/some/path/*` might be used to exclude or include all files in
some path. Without escaping the shell would expand the `*`, leading to
unexpected behaviour.
This commit was originally introduced as part of #41420 and then
reverted with the rest of that PR. However there was no reason to revert
his particular commit.
docker-tools tests load images without specifying any tag
value. Docker then uses the image with tag "latest" which doesn't
exist anymore since commit 39e678e24e.
In particular, this contains Firefox-related and libgcrypt updates.
Other larger rebuilds would apparently need lots of time to catch up
on Hydra, due to nontrivial rebuilds in other branches than staging.
A .la file specifies linker flags to link with the library it describes. Its
"dependency_libs" field lists the libraries that this library depends upon.
This list often contains "-l" flags without corresponding "-L" flags. Many
packages in Nixpkgs deal with this in one of these ways:
- delete .la file [1]
- clear dependency_libs [2]
- add -L flags to dependency_libs [3]
- propagate dependencies [4]
Sometimes "dependency_libs" contain wrong "-L" flags pointing to the "dev"
output with headers rather than to the main output with libraries. They have to
be edited or deleted to reduce closure size [5].
Deleting .la files is often but not always safe [6]. Atomatically deleting as
many of them as possible is complex [7]. Deleting .la files that describe
shared rather than static libraries is probably safe; but clearing their
"dependency_libs" field achieves the same effect with less potential for
unintended consequences. This is the approach that may be enabled for all
Nixpkgs.
[1] 2a79d296d3
[2] c83a530985
[3] 9e0dcf3bd9
[4] 01134e698f
[5] f6c73f1e37
[6] https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Handling_Libtool_Archives
[7] https://github.com/gentoo/gentoo/blob/fb1f2435/eclass/ltprune.eclass
If there is a shared object or executable that's using
position-independent code, the file's mime type is
"application/x-pie-executable", so until this change its dependencies
wouldn't be patched.
This simply adds the mime type to the search loop.
Signed-off-by: aszlig <aszlig@nix.build>
Attributes `imageName` and `imageTag` are exposed if the image is
built by our Nix tools but not if the image is pulled. So, we expose
these attributes for convenience and homogeneity.
Skopeo used by our docker tools was patched to work in the build
sandbox (it used /var/tmp which is not available in the sandbox).
Since this temporary directory can now be set at build time, we remove
the patch from our docker tools.
The extraCommands was, previously, simply put in the body of the script
using nix expansion `${extraCommands}` (which looks exactly like bash
expansion!).
This causes issues like in #34779 where scripts will eventually create
invalid bash.
The solution is to use a script like `run-as-root`.
* * *
Fixes#34779
toPath has confusing semantics and is never necessary; it can always
either just be omitted or replaced by pre-concatenating `/.`. It has
been marked as "!!! obsolete?" for more than 10 years in a C++
comment, hopefully removing it will let us properly deprecate and,
eventually, remove it.
The hack of using `crossConfig` to enforce stricter handling of
dependencies is replaced with a dedicated `strictDeps` for that purpose.
(Experience has shown that my punning was a terrible idea that made more
difficult and embarrising to teach teach.)
Now that is is clear, a few packages now use `strictDeps`, to fix
various bugs:
- bintools-wrapper and cc-wrapper
Regression introduced in 736848723e.
This commit most certainly hasn't been tested with sandboxing enabled
and breaks not only pullImage but also the docker-tools NixOS VM test
because it doesn't find it's certificate path and also relies on
/var/tmp being there.
Fixing the certificate path is the easiest one because it can be done
via environment variable.
I've used overrideAttrs for changing the hardcoded path to /tmp (which
is available in sandboxed builds and even hardcoded in Nix), so that
whenever someone uses Skopeo from all-packages.nix the path is still
/var/tmp.
The reason why this is hardcoded to /var/tmp can be seen in a comment in
vendor/github.com/containers/image/storage/storage_image.go:
Do not use the system default of os.TempDir(), usually /tmp, because
with systemd it could be a tmpfs.
With sandboxed builds this isn't the case, however for using Nix without
NixOS this could turn into a problem if this indeed is the case.
So in the long term this needs to have a proper solution.
In addition to that, I cleaned up the expression a bit.
Tested by building dockerTools.examples.nixFromDockerHub and the
docker-tools NixOS VM test.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @nlewo, @Mic92, @Profpatsch, @globin, @LnL7
The script would parse the output of `git submodule status` but
didn't handle paths with spaces in them. This would result in the
following error when trying to determine the URL of the submodule:
error: key does not contain a section: .url
* fetchs3: add configurable name
Change the default from "foo" to the basename of the s3 URL and make it
configurable.
* fetchs3: fix error on missing credentials.session_token
The session token should default to null instead of failing
* fetchs3: make use of the region argument
Set it to null if you don't want to use it
* fetchs3: prefer local build
Fetcher-types spend more time on network than CPU
Skopeo is used to pull images from a Docker registry (instead of a
Docker deamon in a VM).
An image reference is specified with its name and its digest which is
an immutable image identifier (unlike image name and tag).
Skopeo can be used to get the digest of an image, for instance:
$ skopeo inspect docker://docker.io/nixos/nix:1.11 | jq -r '.Digest'
... binutils and gcc add it already anyway.
Without this it's easy to get cross-toolchain paths longer than 256
chars and nix-daemon will then fail to commit them to /nix/store on XFS.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
(cherry picked from commit ba52ae5048)
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Adds a couple of useful NetBSD and OpenBSD derivations. Some of these
will be integrated into Nixpkgs later.
Noncomprehensive list:
- netbsd.getent
- netbsd.getconf
- netbsd.fts
- openbsd.mg
- netbsd.compat (can replace libbsd)
Since the script running is a failure condition, we should fail the
build properly, not leaving it up to the missing output to determine
that the build went wrong. This should partly address #38952 — nix
build will print out the build log on non-zero exits.
Also fix numberous bugs, such as:
- Not getting confused on more flags taking file arguments.
- Ensuring children reexport their children, but the original
binary/library doesn't.
- Not spawning children when it turns out we just dynamically link
under the threshold but our total number of inputs exceeeds it.
- Children were always named `libunnamed-*`, when that name was
supposed to be the last resort only.
ld-wrapper's own RPATH check hardcodes `.so`, but darwin uses `.dylib`
*and* (in practice due to lousy build systems) `.so`. We don't care
however because we never inject `--rpath` like that in practice on
Darwin. Hopefully someday we won't on linux either.
Pull request #38470 added support for running/building kernels without
modules. This got merged in 38e04bbf29 but
unfortunately while this works perfectly on kernels without modules it
also makes sure that *every* kernel gets no modules.
So all of our VM tests fail since that merge with something like this:
machine# loading module loop...
machine# modprobe: FATAL: Module loop not found in directory /lib/modules/4.14.33
machine# loading module vfat...
machine# modprobe: FATAL: Module vfat not found in directory /lib/modules/4.14.33
machine# loading module nls_cp437...
machine# modprobe: FATAL: Module nls_cp437 not found in directory /lib/modules/4.14.33
machine# loading module nls_iso8859-1...
machine# modprobe: FATAL: Module nls_iso8859-1 not found in directory /lib/modules/4.14.33
machine# loading module fuse...
machine# modprobe: FATAL: Module fuse not found in directory /lib/modules/4.14.33
machine# loading module dm_mod...
machine# modprobe: FATAL: Module dm_mod not found in directory /lib/modules/4.14.33
I shortly tested this against the "misc" VM test and the test is working
again.
In the long term (and I currently don't have time for this) it would be
better to also have a VM test which tests a kernel without modules.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @roberth, @7c6f434c
This is necessary due to a e2fsprogs update
(e6114781b0fad5345a2430fac3587d618273bda2) that causes mke2fs to
enable a feature (metadata_csum) that depends on crc32c.
https://hydra.nixos.org/build/72636785
Setting the hash to null is a convenient way to bypass the hash check
while developing. It looks like the ability to do this was inadvertently
removed while adding vendor directory support.
This still checks that the user is explicitly setting the value but
allows null as a valid option.
This is to go to a reproducible image build.
Note without this options image are identical from the Docker point of
view but generated docker archives could have different hashes.
This is to improve image creation reproducibility. Since the nar
format doesn't support hard link, the tar stream of a layer can be
different if a dependency of a layer has been built locally or if it
has been fetched from a binary cache.
If the dependency has been build locally, it can contain hard links
which are encoded in the tar stream. If the dependency has been
fetched from a binary cache, the tar stream doesn't contain any hard
link. So even if the content is the same, tar streams are different.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
Per @Ericson2314's suggestion [1], make it more clear that the active
hardenings are decided via whitelist; the blacklist is merely for the
debug messages.
1: 36d5ce41d4 (r133279731)
Existing "mips64el" should be "mipsel".
This is just the barest minimum so that nixpkgs can recognize them as
systems - although required for building individual derivations onto
MIPS boards, it is not sufficient if you want to actually build nixos on
those targets
Previously, cargoUpdateHook was meaningful as it was used
in
[`cargo-fetch-deps`](19d3cf81d3/pkgs/build-support/rust/fetch-cargo-deps (L71)).
However, this entire file was removed in
5f8cf0048e. As far as I can
tell, nothing in the code is using it, but it is still
being passed around:
https://github.com/NixOS/nixpkgs/search?q=cargoUpdateHook&type=Code&utf8=%E2%9C%93
There are, however, legitimate use cases for it. For example,
in some software, some dependencies are not locked in Cargo.toml
and this causes Cargo to try fetching another version of them.
This doesn't work well with vendoring crates.
This hook allows to inject patching or whatever necessary workarounds
in the crate vendoring process. I suppose that's what it was for
in there in the first place.
This patch restores this hook and makes it usable again.
Before the code would fail silently for zero values and with some output for
empties. We now currently handle both via defaulting value to zero and making
`let` return success error code when there's no syntax error.
A separate function for building Bazel-bazed packages. Internally it splits the
build into two phases, fetching and building.
Users are expected to provide `fetchArgs.sha256` -- checksum of fetched
dependencies. Local dependencies should be removed in `fetchArgs.preInstall`.
Overall `fetchArgs` and `buildArgs` can be used to add specific steps to fetch
and build.
`find -executable` finds everything with the executable bit set,
including directories. Thats not harmful in this scenario as `cp` won't
copy those directories, but it does result in a few warning messages.
I originally wrote this for packaging proprietary games in Vuizvui[1]
but I thought it would be generally useful as we have a fair amount of
proprietary software lurking around in nixpkgs, which are a bit tedious
to maintain, especially when the library dependencies change after an
update.
So this setup hook searches for all ELF executables and libraries in the
resulting output paths after install phase and uses patchelf to set the
RPATH and interpreter according to what dependencies are available
inside the builder.
For example consider something like this:
stdenv.mkDerivation {
...
nativeBuildInputs = [ autoPatchelfHook ];
buildInputs = [ mesa zlib ];
...
}
Whenever for example an executable requires mesa or zlib, the RPATH will
automatically be set to the lib dir of the corresponding dependency.
If the library dependency is required at runtime, an attribute called
runtimeDependencies can be used to list dependencies that are added to
all executables that are discovered unconditionally.
Beside this, it also makes initial packaging of proprietary software
easier, because one no longer has to manually figure out the
dependencies in the first place.
[1]: https://github.com/openlab-aux/vuizvui
Signed-off-by: aszlig <aszlig@nix.build>
Closes: #34506
Among other things, this will allow *2nix tools to output plain data
while still being composable with the traditional
callPackage/.override interfaces.
Summary:
According to git-submodule manpage,
"git submodule status" prefixes the hash with a '-' if it is not
initialized, and other chars in other circumstances.
(this is consistent on the various git versions tested)
nix-prefetch-git runs "git submodule init" which does you'd think,
but apparently despite this earlier versions of git before 2.16
would still give the hash the '-' suffix.
In particular this is the behavior when using 2.15 and 2.14.1
from the nixos-17.09 and nixos-17.03 channels respectively.
The script then used awk to drop the first char of the first field
which does the wrong thing when there is no prefix emitted:
while there is a space character before the hash, this is not
part of the field and so we ended up eating the first character
of the hash.
To fix this in a way that also works with the previous behavior,
this commit instead uses awk to grab the hash field
and uses tr to delete any '-' chars should they be present.
This seems to work in my testing, and for example can now
successfully fetch the source for "nginxModules.brotli"
where previously it would generate an error:
fatal: '22564a95d9ab58865a096b8d9f7324ea5f2e03e' is not a commit and a branch 'fetchgit' cannot be created from it
(we dropped a '2' from the beginning of the hash)
We still ensure the old and new ones start, respectfully, with `a/` and
`b/`. Use with `stripLen` to ensure tha the old `a/` and `/b` are gone
if a new prefix is added.
cargo-vendor generates almost the right cargo config. Store it with the
vendored files and patch it on use.
This allows to re-use the generated config when using git dependencies.
- All deps go on the PATH
- CC and Bintools wrappers with their host != depender's host still get their
setup hooks run.
- Environment hooks get applied to all packages
This isn't so elegent, but eases the transition on a very significant
PR.
We now have the information to properly determine the role the
cc-wrapper dependency has, by taking advantage of `offset`. No longer
use the soon-to-be-deprecated crossConfig environment variable, the
temp hack used before this change.
Changes:
* doesn't handle root user separately
* doesn't chdir("/") which makes using it seamless
* only bind mounts, doesn't symlink (i.e. files)
Incidentally, fixes#33106.
It's about two times shorter than the previous version, and much
easier to read/follow through. It uses GLib quite heavily, along with
RAII (available in GCC/Clang).
It would be nice to be able to track Nix requests. It's not trustworthy,
but can be helpful for stats and routing in HTTP logs.
Since `fetchurl` is used so widely, we should "magically" get a UA on
`fetchzip`, `fetchFromGitHub`, and other related fetchers.
Since `fetchurl` is only used for fixed-output derivations, this should
cause no mass rebuild.
User-Agent example: curl/7.57.0 Nixpkgs/18.03
* Wrap LEN macro in parantheses
* Drop env_filter in favor of stateful environ_blacklist_filter,
use execvp instead of execvpe, don't explicitly use environ
* Add argument error logging wherever it makes sense
* Drop strjoin in favor of asprintf
* char* -> const char* where appropriate
* Handle stat errors
* Print user messages with fputs, not errorf
* Abstract away is_str_in (previously bind_blacklisted)
* Cleanup temporary directory on error
* Some minor syntactic and naming changes
Thanks to Jörg Thalheim and Tuomas Tynkkynen for the code review!
Factor a bintools (i.e. binutils / cctools) wrapper out of cc-wrapper. While
only LD is wrapped, the setup hook defines environment variables on behalf of
other utilites.
They aren't meant to be critical (uncatchable) errors.
Tested with nix-env + checkMeta:
[ "x86_64-linux" "i686-linux" "x86_64-darwin" "aarch64-linux" ]
This commit adds the CentOS 7.4 base image from the CentOS mirror, for use with
building RPMs or evaluating Nix expressions in a CentOS image.
When CentOS 7.5 comes out, I will swap this URL to the permanently vaulted image.
This change adds granular, non-docker daemon docker image fetchers and
a docker image layer compositor to be used in conjunction with the
`docker2nix` utility provided by the `haskellPackages.hocker` package.
This change includes a hackage package version bump and updated sha256
for recent fixes released to `hocker` resulting from formulating this
patch.
On non-GNU (gcc) compilers, there is no "/lib/gcc/..."
so when this is eventually expanded this is empty
resulting in an incomplete "-idirafter " that
eats the next argument:
-idirafter -B/nix/store/wamjwwdvkmhbf4f2902nhw8jxxzv0hy3-clang-wrapper-4.0.1/bin/
Certain tools, e.g. compilers, are customarily prefixed with the name of
their target platform so that multiple builds can be used at once
without clobbering each other on the PATH. I was using identifiers named
`prefix` for this purpose, but that conflicts with the standard use of
`prefix` to mean the directory where something is installed. To avoid
conflict and confusion, I renamed those to `targetPrefix`.
This continues #23374, which always kept around both attributes, by
always including both propagated files: `propgated-native-build-inputs`
and `propagated-build-inputs`. `nativePkgs` and `crossPkgs` are still
defined as before, however, so this change should only barely
observable.
This is an incremental step to fully keeping the dependencies separate
in all cases.
After #31497 starter quoting all values, there arouse the need to left some
values evaluated.
`--set-default var value` expands to `export var=${var-value}`, where value is
not evaluated and literally assigned to var unless it is already set.
`--set-eval var value` expands to `export var=$(eval echo value)`, where value
is evaluated by `eval`.
Currently we wrap ssh so it can find the config file passed in by
<ssh-config-file>. If one however uses ProxyCommand ssh, then ssh that
is on PATH is taken (which is also unavailable when using nix-shell
--pure), which is the plain ${openssh}/bin/ssh.
This commit makes sure our wrapped ssh is available on PATH.
For a while now, the only thing the 'uboot' attribute does is to tell
whether to add ubootTools to kernel/initrd builds. That can be
determined with platform.kernelTarget == "uImage" just as well.
If a dynamic linker for target is not found the generated script fails
due to unbound variable error (due to "set -u"). Correct by specifying
default value with dynamicLinker:- and not generating ldflagsBefore if
no linker is found.
This problem was found when cross compiling to mingw32 targets
The previous one was very bad and worsened the situation.
But even running with some nix-1.12 I'm unable to reproduce
the original failure. Let's unblock channels for now.
Unlike pathsFromGraph, on Nix 1.12, this function produces a
registration file containing correct NAR hash/size information.
https://hydra.nixos.org/build/62832723
The biggest benefit is that we no longer have to update the registry
package. This means that just about any cargo package can be built by
nix. No longer does `cargo update` need to be feared because it will
update to packages newer then what is available in nixpkgs.
Instead of fetching the cargo registry this bundles all the source code
into a "vendor/" folder.
This also uses the new --frozen and --locked flags which is nice.
Currently cargo-vendor only provides binaries for Linux and
macOS 64-bit. This can be solved by building it for the other
architectures and uploading it somewhere (like the NixOS cache).
This also has the downside that it requires a change to everyone's deps
hash. And if the old one is used because it was cached it will fail to
build as it will attempt to use the old version. For this reason the
attribute has been renamed to `cargoSha256`.
Authors:
* Kevin Cox <kevincox@kevincox.ca>
* Jörg Thalheim <Mic92@users.noreply.github.com>
* zimbatm <zimbatm@zimbatm.com>
This requires some small changes in the stdenv, then working around the
weird choice LLVM made to hardcode @rpath in its install name, and then
lets us remove a ton of annoying workaround hacks in many of our Go
packages. With any luck this will mean less hackery going forward.
Before this fix, it seemed to be trying to merge our postFetch with the
patch normalization logic, but accidentally clobbering the whole thing
with the passed-in value.
cc-wrapper may wrap a cc-compiler, but it doesn't need one to build
itself. (c.f. expand-response-params is a separate derivation.) This
helps avoid cycles on the cross stuff, in addition to removing a
useless dependency edge.
I could have been super careful with overrides in the stdenv to avoid
the mass rebuild, but I don't think it's worth it.
We were using 'Combined Image JSON + Filesystem Changeset Format' [1] to
unpack and pack image and this patch switches to the format used by the registry.
We used the 'repository' file which is not generated by Skopeo when it
pulls an image. Moreover, all information of this file are also in the
manifest.json file.
We then use the manifest.json file instead of 'repository' file. Note
also the manifest.json file is required to push an image with Skopeo.
Fix#29636
[1] 749d90e10f/image/spec/v1.1.md (combined-image-json--filesystem-changeset-format)
The database dump doesn't contain sha and size. This leads to invalid
path in the container. We have to fix the database by using
nix-store.
Note a better way to do this is available in Nix 1.12 (since the
database dump contains all required information).
We also add content output paths in the gcroots since they ca be used
by the container.
Currently, the contents closure is copied to the layer but there is no
nix database initialization. If pkgs.nix is added in the contents,
nix-store doesn't work because there is no nix database.
From the contents of the layer, this commit generates and loads the
database in the nix store of the container. This only works if there
is no parent layer that already have a nix store (to support several
nix layers, we would have to merge nix databases of parent layers).
We also add an example to play with the nix store inside the
container. Note it seems `more` is a missing dependency of the nix
package!
1. `crossDrv` is now the default so we don't need to worry about that in
build != host builds.
2. shell is the build time shell, so `wrapCCCross` doesn't need to
worry, as build == host.
3. `shell.shellPath` will always be appended where useful.
4. Complicated `shell == ""` logic served no purpose.
Fetch into $out and remove all version control files to make it
deterministic (.repo and all .git subdirectories - e.g. the .git/index
files change every time).
Additionally I've changed the default of "useArchive" to false because
fetching with "--archive" will fail for some projects (e.g.
"platform/external/iosched" from the AOSP).
Now, this function should hopefully work for every tag of the AOSP.
Before this patch, a VM was used to spawn docker that pulled the
VM. Now, the tool Skopeo does this job well so we can simplify our
dockerTools since we doesn't need Docker anymore:)
This also fixe the regression described in
https://github.com/NixOS/nixpkgs/issues/29271 : cntlm proxy doesn't
work in 17.09 while it worked in 17.03.
Note Skopeo doesn't produce the same output than docker pull so, we
have to update sha.
This was a problem when run inside a sandbox, e.g. via
"fetchRepoProject". The error message from repo seems unrelated:
fatal: Cannot get https://gerrit.googlesource.com/git-repo/clone.bundle
fatal: error no host given
But the exception is actually thrown due to missing certificates
(/etc/ssl/certs). It should be possible to provide another location via
environment variables (e.g. SSL_CERT_FILE, REQUESTS_CA_BUNDLE or
CURL_CA_BUNDLE) but apparently that doesn't actually work for some
reason (would have to study our Python packaging).
Now "fetchRepoProject" works without the "--no-clone-bundle" option.
The verification was failing with the following error:
gpg: keyblock resource '/tmp/nix-build-XYZ.drv-0/.repo/repo/./.repoconfig/gnupg/pubring.kbx': No such file or directory
Using an absolute path for $HOME fixes this.
And since 175ecbab91 the dependencies on
"git" and "gnupg" aren't required anymore as "gitRepo" already covers
them.
This reverts commit 0a944b345e, reversing
changes made to 61733ed6cc.
I dislike these massive stdenv changes with unclear motivation,
especially when they involve gratuitous mass renames like NIX_CC ->
NIX_BINUTILS. The previous such rename (NIX_GCC -> NIX_CC) caused
months of pain, so let's not do that again.
cctool's as needs to be told use to use gnu as, or else we'd need a
dependency cycle between cctools and clang for this case.
In general, this is not a problem because clang uses its own integrated
assembler where possible, and gnu as otherwise.
To wait for the docker deamon, curl requests are sent. However, if a
http proxy is set, it will respond instead of the docker daemon.
To avoid this, we send docker ps command instead of curl command.
This becomes necessary if more wrappers besides cc-wrapper start
supporting hardening flags. Also good to make the warning into an
error.
Also ensure interface is being used right: Not as a string, not just in
bash.
ccPath is only defined below, so this condition would never be true.
Worse, that's not quite true: what if somebody happend to have `/clang`
and no sandboxing. Boy, wouldn't that be annoying to debug!
set-source-date-epoch-to-latest.sh to ignore files newer than "$NIX_BUILD_TOP/.." (unlike "$NIX_BUILD_TOP" it is root-owned and cannot be touched by nixbld1).
Having multiple compilers in the build environment would result in an
invalid LD_DYLD_PATH like /usr/lib/dyld/usr/lib/dyld.
Since the path is hardcoded in XNU it can't be anything but
/usr/lib/dyld anyway.
This fixes a bug introduced in #27831: `for path in "$dir"/lib*.so` assumed that
all libs match `lib*.so`, but 07674788d6 started
adding libs that match `*.so` and `*.so.*`.
`makeWrapper` and `wrapProgram` are being invoked on all kinds of
wacky things (usually with the help of bash globs or other machine
assistance).
So far, I have come across `wrapProgram` being invoked on a directory,
as well as on the empty string.
As far as I can tell, it's only valid to invoke these utilities on a
normal (non-directory, non-device) executable file. This commit
enforces that precondition.
Previously, makeWrapper would accept arguments it didn't recognize,
potentially allowing argument misspellings or broken callers.
Now, makeWrapper dies with a backtrace if it is called incorrectly.
Also changes `wrapProgram` so that it doesn't pass through the first
argument twice --- this was tripping up the argument checking.
Now is an opportune time to do this, as the infixSalt conversion in
`add-flags.sh` ensures that all the relevant `NIX_*` vars will be
defined even if empty.
This is basically a sed job, in preparation of the next commit. The
rules are more or less:
- s"NIX_(.._WRAPPER_)?([a-zA-Z0-9@]*)"NIX_\1@infixSalt@_\2"g
- except for non-cc-wrapper-specific vars like `NIX_DEBUG`
This is an ugly temp hack for cross compilation, but now we have something better on the way.
Bind `infixSalt` as an environment variable as it will be used in it.
Some programs store the executable in a different place and link it
from the `bin` directory. For example, Polari links `$out/bin/polari`
to `$out/share/polari/org.gnome.Polari`. `wrapGAppsHook` did not follow
symlinks so it was not able to wrap Polari, making it unable to access
GObject introspection definitions required for running the program.
I made the wrapping script follow symlinks to fix this corner case.
In 8d76eff, @Ericson2314 changed the representation of the value that
`findInputs` generated from a whitespace-separated bunch strings to an
actual array of strings.
Expressions that *consume* that value, however, also needed to be
changed to iterate over all the contents of the array, else they would
only select the first value, which turns out to be somewhat limiting.
Fixes#27873
Wael M. Nasreddine
Will Dietz
Graham Christensen
Graham Christensen
Daiderd Jordan
John Ericson
Sarah Brofeldt
John Ericson
aszlig
Vladimír Čunát
Jörg Thalheim
Jan Malakhovski
Frederik Rietdijk
Stefan Junker
Jack Kelly
Silvan Mosberger
Andreas Rammhold
Symphorien Gibol
Justin Humm
Matthew Bauer
Shea Levy
Profpatsch
Alyssa Ross
Kamil Chmielewski
Samuel Dionne-Riel
volth
Will Dietz
CrystalGamma
John Ericson
Stewart Mackenzie
Jörg Thalheim
Léo Gaspard
xeji
Eelco Dolstra
Matthew Bauer
James Deikun
Eduard-Mihai Burtescu
Nick Novitski
Periklis Tsirakidis
John Q Crosscompiler
Lorenzo Manacorda
Frederik Rietdijk
Thomas Tuegel
Thomas Tuegel
Timo Kaufmann
Uri Baghin
Antoine Eiche
Mathias Schreck
Peter Simons
Jacob Mitchell
Daniel Barlow
Guillaume Maudoux
Justin Bedő
Tim Cuthbertson
Cole Mickens
Orivej Desh
Daniel Peebles
Yegor Timoshenko
Benjamin Hipple
Ben Wolsieffer
Benjamin Saunders
Benjamin Saunders
Sebastian Jordan
P-E-Meunier
Tuomas Tynkkynen
Alexandre Esteves
adisbladis
Lionello Lunesu
Michael Bishop
zimbatm
Linus Heckemann
Henry Till
Tuomas Tynkkynen
Jean-Philippe Braun
Piotr Bogdan
Michael Raskin
Jan Tojnar
Charles Strahan
Ryan Trinkle
Kevin Cox
Robert Hensing
Will Fancher
Shell Turner
Franz Pletz
Nikolay Amiantov
Mario Rodas
Eelco Dolstra
Yurii Rashkovskii
Pierre-Etienne Meunier
Parnell Springmeyer
Peter Hoeg
gnidorah
Yegor Timoshenko
Andrew Childs
Robin Gloster
dywedir
Wei-Ming Yang
Dmitry Kalinkin
Joachim F
Dan Peebles
Fahad Sadah
Dylan Simon
Bojan Nikolic
knupfer
Falco Peijnenburg
Rodney Lorrimar
Vaibhav Sagar
Dan Haraj
Nikita Uvarov
Michael Weiss
Domen Kožar
volth
Domen Kožar
Taahir Ahmed
davidak
Michael Alan Dorman