This seems to have worked in 15f105d41f (5
months ago) but broke somewhere in the meantime.
The current module doesn't seem to be underdocumented and might need a
serious refactor. It requires quite some hacks to get it to work (see
https://github.com/NixOS/nixpkgs/issues/86305#issuecomment-621129942),
or how the ldap.nix test used systemd.services.openldap.preStart and
made quite some assumptions on internals.
Mic92 agreed on being added as a maintainer for the module, as he uses
it a lot and can possibly fix eventual breakages. For the most basic
startup breakages, the remaining openldap.nix test might suffice.
- Use floating points instead of strings, which Nix now supports
- Make the type of picom.settings option recursive
- Add a meaningful description of both the option and its type
Add extraConfig option for the muc submodule.
Also move the global extraConfig before all components and
virtualhosts, because the manual states:
The configuration is divided into two parts. The first part is known as
the "global" section. All settings here apply to the whole server, and
are the default for all virtual hosts.
The second half of the file is a series of VirtualHost and Component
definitions. Settings under each VirtualHost or Component line apply
only to that host.
Before, if at least one muc was defined, or uploadHttp enabled, the
global extraConfig would end up after "muc" or "http_upload" component
making it apply to that component only and not globally.
We add a Prosody entry to the NixOS manual showing how to setup a
basic XEP-0423 compliant Prosody service. This example also showcase
how to generate the associated ACME certificates.
Note: The <programlisting> body might look poorly indented, but trust
me, it's necessary. If we try to increase their indentation level, the
HTML output will end up containing a lot of unecesseray heading spaces
breaking the formatting...
The output file is found and handled by thelounge itself [1], leaving
the user free to override THELOUNGE_HOME in the environment if they
choose, but having a sensible default to make `thelounge` generally
usable in most cases.
This solution follows discussion on #70318.
[1] 9ef5c6c67e/src/command-line/utils.js (L56)
We are leveraging the systemd sandboxing features to prevent the
service accessing locations it shouldn't do. Most notably, we are here
preventing the prosody service from accessing /home and providing it
with a private /dev and /tmp.
Please consult man systemd.exec for further informations.
Setting up a XMPP chat server is a pretty deep rabbit whole to jump in
when you're not familiar with this whole universe. Your experience
with this environment will greatly depends on whether or not your
server implements the right set of XEPs.
To tackle this problem, the XMPP community came with the idea of
creating a meta-XEP in charge of listing the desirable XEPs to comply
with. This meta-XMP is issued every year under an new XEP number. The
2020 one being XEP-0423[1].
This prosody nixos module refactoring makes complying with XEP-0423
easier. All the necessary extensions are enabled by default. For some
extensions (MUC and HTTP_UPLOAD), we need some input from the user and
cannot provide a sensible default nixpkgs-wide. For those, we guide
the user using a couple of assertions explaining the remaining manual
steps to perform.
We took advantage of this substential refactoring to refresh the
associated nixos test.
Changelog:
- Update the prosody package to provide the necessary community
modules in order to comply with XEP-0423. This is a tradeoff, as
depending on their configuration, the user might end up not using them
and wasting some disk space. That being said, adding those will
allow the XEP-0423 users, which I expect to be the majority of
users, to leverage a bit more the binary cache.
- Add a muc submodule populated with the prosody muc defaults.
- Add a http_upload submodule in charge of setting up a basic http
server handling the user uploads. This submodule is in is
spinning up an HTTP(s) server in charge of receiving and serving the
user's attachments.
- Advertise both the MUCs and the http_upload endpoints using mod disco.
- Use the slixmpp library in place of the now defunct sleekxmpp for
the prosody NixOS test.
- Update the nixos test to setup and test the MUC and http upload
features.
- Add a couple of assertions triggered if the setup is not xep-0423
compliant.
[1] https://xmpp.org/extensions/xep-0423.html
Rework withExtensions / buildEnv to handle currently enabled
extensions better and make them compatible with override. They now
accept a function with the named arguments enabled and all, where
enabled is a list of currently enabled extensions and all is the set
of all extensions. This gives us several nice properties:
- You always get the right version of the list of currently enabled
extensions
- Invocations chain
- It works well with overridden PHP packages - you always get the
correct versions of extensions
As a contrived example of what's possible, you can add ImageMagick,
then override the version and disable fpm, then disable cgi, and
lastly remove the zip extension like this:
{ pkgs ? (import <nixpkgs>) {} }:
with pkgs;
let
phpWithImagick = php74.withExtensions ({ all, enabled }: enabled ++ [ all.imagick ]);
phpWithImagickWithoutFpm743 = phpWithImagick.override {
version = "7.4.3";
sha256 = "wVF7pJV4+y3MZMc6Ptx21PxQfEp6xjmYFYTMfTtMbRQ=";
fpmSupport = false;
};
phpWithImagickWithoutFpmZip743 = phpWithImagickWithoutFpm743.withExtensions (
{ enabled, all }:
lib.filter (e: e != all.zip) enabled);
phpWithImagickWithoutFpmZipCgi743 = phpWithImagickWithoutFpmZip743.override {
cgiSupport = false;
};
in
phpWithImagickWithoutFpmZipCgi743
Fixes#858001d61efb7f1 accidentially changed the
restartTriggers of `datadog-agent.service` to point to the attribute
name (in this case, a location relative to `/etc`), instead of the
location of the config files in the nix store.
This caused datadog to not get restarted on activation of new
config, if the file name hasn't changed.
Fix this, by pointing this back to the location in the nix store.
Use types.str instead of types.path to exclude private information from
the derivation.
Add a warinig about the contents of acl beeing included in the nix
store.
Enables multi-site configurations.
This break compatibility with prior configurations that expect options
for a single dokuwiki instance in `services.dokuwiki`.
* nixos/k3s: simplify config expression
* nixos/k3s: add config assertions and trim unneeded bits
* nixos/k3s: add a test that k3s works; minor module improvements
This is a single-node test. Eventually we should also have a multi-node
test to verify the agent bit works, but that one's more involved.
* nixos/k3s: add option description
* nixos/k3s: add defaults for token/serveraddr
Now that the assertion enforces their presence, we dont' need to use the typesystem for it.
* nixos/k3s: remove unneeded sudo in test
* nixos/k3s: add to test list
After the recent rewrite, enabled extensions are passed to php programs
through an extra ini file by a wrapper. Since httpd uses shared module
instead of program, the wrapper did not affect it and no extensions
other than built-ins were loaded.
To fix this, we are passing the extension config another way – by adding it
to the service's generated config.
For now we are hardcoding the path to the ini file. It would be nice to add
the path to the passthru and use that once the PHP expression settles down.
Without this, you can change the list of appended or prepended nameservers in
your NetworkManager config, and nixos-rebuild doesn't cause those changes to
come into effect.
running the service in a sandbox. read-only root file system,
with tmpfs mounted in /tmp, hidden /root and /home,
temporary /dev. the only writeable path is the data directory,
which according to my experiments is enough for the service
to work correctly.
This commit:
1. Updates the path of the traefik package, so that the out output is
used.
2. Adapts the configuration settings and options to Traefik v2.
3. Formats the NixOS traefik service using nixfmt.
We already set the relevant env vars in the systemd services. That does
not help one when executing any of the executables outside a service,
e.g. when creating a new user.
The new wording does not assume the user is upgrading.
This is because a user could be setting up a new installation on 20.03
on a server that has a 19.09 or before stateVersion!!
The new wording ensures that confusion is reduced by stating that they
do not have to care about the assumed 16→17 transition.
Then, the wording explains that they should, and how to upgrade to
version 18.
It also reviews the confusing wording about "multiple" upgrades.
* * *
The only thing we cannot really do is stop a fresh install of 17 if
there was no previous install, as it cannot be detected. That makes a
useless upgrade forced for new users with old state versions.
It is also important to state that they must set their package to
Nextcloud 18, as future upgrades to Nextcloud will not allow an uprade
from 17!
I assume future warning messages will exist specifically stating what to
do to go from 18 to 19, then 19 to 20, etc...
I've had Netdata crash on me sometimes. Rarely but more than once. And I lost days of data before I noticed.
Let's be nice and restart it on failures by default.
Also removed `pkgs.hydra-flakes` since flake-support has been merged
into master[1]. Because of that, `pkgs.hydra-unstable` is now compiled
against `pkgs.nixFlakes` and currently requires a patch since Hydra's
master doesn't compile[2] atm.
[1] https://github.com/NixOS/hydra/pull/730
[2] https://github.com/NixOS/hydra/pull/732
Instead of making the configuration less portable by hard coding the number of
jobs equal to the cores we can also let nix set the same number at runtime.
This prevents duplication in cross-compiled nixos machines. The
bootstrapped glibc differs from the natively compiled one, so we get
two glibc’s in the closure. To reduce closure size, just use
stdenv.cc.libc where available.
We have this bug https://github.com/elementary/gala/issues/636
when using notifications in gala. It's likely to not really be fixed
because all development is on the new notifications server.
Them removing cerbere and registering with the SessionManager
should make shutdown very fast. This was even done in plank [0]
which was the last factor outside cerbere causing this.
[0]]: a8d2f255b2
So now we have only packages for human interaction in php.packages and
only extensions in php.extensions. With this php.packages.exts have
been merged into the same attribute set as all the other extensions to
make it flat and nice.
The nextcloud module have been updated to reflect this change as well
as the documentation.
In 7f838b4dde, we dropped systemd-udev-settle.service from display-manager.service's wants.
Unfortunately, we are doing something wrong since without it both Xorg and Wayland fail to start:
Failed to open gpu '/dev/dri/card0': GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Operation not permitted
Until we sort this out, let's add systemd-udev-settle.service to GDM to unblock the channels.
This allows you to specify the system-wide flake registry. One use is
to pin 'nixpkgs' to the Nixpkgs version used to build the system:
nix.registry.nixpkgs.flake = nixpkgs;
where 'nixpkgs' is a flake input. This ensures that commands like
$ nix run nixpkgs#hello
pull in a minimum of additional store paths.
You can also use this to redirect flakes, e.g.
nix.registry.nixpkgs.to = {
type = "github";
owner = "my-org";
repo = "my-nixpkgs";
};
Many options define their example to be a Nix value without using
literalExample. This sometimes gets rendered incorrectly in the manual,
causing confusion like in https://github.com/NixOS/nixpkgs/issues/25516
This fixes it by using literalExample for such options. The list of
option to fix was determined with this expression:
let
nixos = import ./nixos { configuration = {}; };
lib = import ./lib;
valid = d: {
# escapeNixIdentifier from https://github.com/NixOS/nixpkgs/pull/82461
set = lib.all (n: lib.strings.escapeNixIdentifier n == n) (lib.attrNames d) && lib.all (v: valid v) (lib.attrValues d);
list = lib.all (v: valid v) d;
}.${builtins.typeOf d} or true;
optionList = lib.optionAttrSetToDocList nixos.options;
in map (opt: {
file = lib.elemAt opt.declarations 0;
loc = lib.options.showOption opt.loc;
}) (lib.filter (opt: if opt ? example then ! valid opt.example else false) optionList)
which when evaluated will output all options that use a Nix identifier
that would need escaping as an attribute name.
This windowManager and desktopManager doesn't even have
an option to use it. git history suggests to me that there's no way anyone
finds this useful anymore.
* creating a local backup
* creating a borgbackup server
* backing up to a borgbackup server
* hints about the Vorta graphical desktop application
* Added documentation about Vorta desktop client
Tested the examples locally and with my borgbase.com account.
Upgrades Hydra to the latest master/flake branch. To perform this
upgrade, it's needed to do a non-trivial db-migration which provides a
massive performance-improvement[1].
The basic ideas behind multi-step upgrades of services between NixOS versions
have been gathered already[2]. For further context it's recommended to
read this first.
Basically, the following steps are needed:
* Upgrade to a non-breaking version of Hydra with the db-changes
(columns are still nullable here). If `system.stateVersion` is set to
something older than 20.03, the package will be selected
automatically, otherwise `pkgs.hydra-migration` needs to be used.
* Run `hydra-backfill-ids` on the server.
* Deploy either `pkgs.hydra-unstable` (for Hydra master) or
`pkgs.hydra-flakes` (for flakes-support) to activate the optimization.
The steps are also documented in the release-notes and in the module
using `warnings`.
`pkgs.hydra` has been removed as latest Hydra doesn't compile with
`pkgs.nixStable` and to ensure a graceful migration using the newly
introduced packages.
To verify the approach, a simple vm-test has been added which verifies
the migration steps.
[1] https://github.com/NixOS/hydra/pull/711
[2] https://github.com/NixOS/nixpkgs/pull/82353#issuecomment-598269471
After upgrading to NixOS 20.03, I've got the following warning:
nginx: [warn] could not build optimal types_hash, you should increase either types_hash_max_size: 2048 or types_hash_bucket_size: 64; ignoring types_hash_bucket_size
The documentation states that "if nginx emits the message requesting
to increase either hash max size or hash bucket size then the first
parameter should first be increased" (aka types_hash_max_size).
In 19.03, the size of mime.types was around 100 entries. In 20.03, we
are around 900 entries. This is due to ff0148d868 which makes nginx
use mailcap mime.types.
In ff0148d868, nginx configuration was modified to use mime.types
from mailcap package as it is more complete. However, there are two
places where mime.types is included in configuration. When the user
was setting `cfg.httpConfig`, the mime.types from nginx was still
used. This commit fix that by moving the common snippet in a variable
of its own and ensure it is used at both places.
It's impossible to move two major-versions forward when upgrading
Nextcloud. This is an issue when comming from 19.09 (using Nextcloud 16)
and trying to upgrade to 20.03 (using Nextcloud 18 by default).
This patch implements the measurements discussed in #82056 and #82353 to
improve the update process and to circumvent similar issues in the
future:
* `pkgs.nextcloud` has been removed in favor of versioned attributes
(currently `pkgs.nextcloud17` and `pkgs.nextcloud18`). With that
approach we can safely backport major-releases in the future to
simplify those upgrade-paths and we can select one of the
major-releases as default depending on the configuration (helpful to
decide whether e.g. `pkgs.nextcloud17` or `pkgs.nextcloud18` should be
used on 20.03 and `master` atm).
* If `system.stateVersion` is older than `20.03`, `nextcloud17` will be
used (which is one major-release behind v16 from 19.09). When using a
package older than the latest major-release available (currently v18),
the evaluation will cause a warning which describes the issue and
suggests next steps.
To make those package-selections easier, a new option to define the
package to be used for the service (namely
`services.nextcloud.package`) was introduced.
* If `pkgs.nextcloud` exists (e.g. due to an overlay which was used to
provide more recent Nextcloud versions on older NixOS-releases), an
evaluation error will be thrown by default: this is to make sure that
`services.nextcloud.package` doesn't use an older version by accident
after checking the state-version. If `pkgs.nextcloud` is added
manually, it needs to be declared explicitly in
`services.nextcloud.package`.
* The `nixos/nextcloud`-documentation contains a
"Maintainer information"-chapter which describes how to roll out new
Nextcloud releases and how to deal with old (and probably unsafe)
versions.
Closes#82056
Running the manual on a TTY is useless in the graphical ISOs and not
particularly useful in non-graphical ISOs (since you can also run
'nixos-help').
Fixes#83157.
* Removed the use of gnome-screensaver (https://gitlab.gnome.org/GNOME/gnome-flashback/issues/18)
* Flashback's menu-related environment variables are now set in the gnome3.nix module instead of gnome-panel to resolve dependency conflict.
Previously, systemd.network.links was only respected with networkd
enabled, but it's really udev taking care of links, no matter if
networkd is enabled or not.
With our module fixed, there's no need to manually manage the text file
anymore.
This was originally applied in 3d1079a20d,
but was reverted due to 1115959a8d causing
evaluation errors on hydra.
Broken by 0f973e273c284a97a8dffeab7d9c0b09a88b7139 in #73533
The type of the checkReversePath option allows "strict" and "loose" as
well as boolean values.
If the host network stack is slow to start, the alertmanager fails to
start with this error message:
caller=main.go:256 msg="unable to initialize gossip mesh" err="create memberlist: Failed to get final advertise address: No private IP address found, and explicit IP not provided"
This bug can be reproduced by shutting down the network stack and
restarting the alertmanager.
Note I don't know why I didn't hit this issue with previous
alertmanager releases.
* Linkify all service options used in the code-examples.
* Demonstrated the use of `riot-web.override {}`.
* Moved the example how to configure a postgresql-database for
`matrix-synapse` to this document from the 20.03 release-notes.
Fixes some dependency ordering problems at boot time with services that
require DNS. Without Type=notify these services might be started before
stubby was ready to accept DNS requests.
The v7 series is very different.
This commit introduces the 3 packages: fahclient, fahcontrol and
fahviewer. It also rebuilds the NixOS module to map better with the new
client.
Previously the assertion passed if the kernel had support OR the
filter was *enabled*. In the case of a kernel without support, the
`checkReversePath` option defaulted to false, and then failed the
assertion.
...even when networkd is disabled
This reverts commit ce78f3ac70, reversing
changes made to dc34da0755.
I'm sorry; Hydra has been unable to evaluate, always returning
> error: unexpected EOF reading a line
and I've been unable to reproduce the problem locally. Bisecting
pointed to this merge, but I still can't see what exactly was wrong.
Running haproxy with "DynamicUser = true" doesn't really work, since
it prohibits specifying a TLS certificate bundle with limited
permissions. This revives the haproxy user and group, but makes them
dynamically allocated by NixOS, rather than statically allocated. It
also adds options to specify which user and group haproxy runs as.
Previously, systemd.network.links was only respected with networkd
enabled, but it's really udev taking care of links, no matter if
networkd is enabled or not.
With our module fixed, there's no need to manually manage the text file
anymore.
- Fix misspelled option. mkRenamedOptionModule is not used because the
option hasn't really worked before.
- Add missing cfg.telemetryPath arg to ExecStart.
- Fix mkdir invocation in test.
The allowed values have changed in bd3319d28c.
0.15:
--log.level="info" Only log messages with the given severity or above. Valid levels: [debug, info, warn, error, fatal]
--log.format="logger:stderr"
Set the log target and format. Example: "logger:syslog?appname=bob&local=7" or "logger:stdout?json=true"
0.17:
--log.level=info Only log messages with the given severity or above. One of: [debug, info, warn, error]
--log.format=logfmt Output format of log messages. One of: [logfmt, json]
Add a cage module to nixos. This can be used to make kiosk-style
systems that boot directly to a single application. The user (demo by
default) is automatically logged in by this service and the
program (xterm by default) is automatically started.
This is useful for some embedded, single-user systems where we want
automatic booting. To keep the system secure, the user should have
limited privileges.
Based on the service provided in the Cage wiki here:
https://github.com/Hjdskes/cage/wiki/Starting-Cage-on-boot-with-systemd
Co-Authored-By: Florian Klink <flokli@flokli.de>
* prometheus-nginx-exporter: 0.5.0 -> 0.6.0
* nixos/prometheus-nginx-exporter: update for 0.6.0
Added new option constLabels and updated virtualHost name in the
exporter's test.
Prior to this fix, changes to certain settings would not be applied
automatically and users would have to know to manually restart the
affected service. A prime example of this is
`services.mailman.hyperkitty.baseUrl`, or various things that affect
`mailman3/settings.py`
Directory mode 755 is standard for running services. Without this,
downloadDirPermissions doesn't have any use since other users can't even
look inside the main transmission directory
* nixos/gdm: Fix pulseaudio tmpfiles structure
Fix the following startup failure of the sound service in the gdm
session that was introduced by #75893:
```
Feb 16 11:44:15 qp pulseaudio[1432]: W: [pulseaudio] core-util.c: Failed to open configuration file '/run/gdm/.config/pulse//daemon.conf': Not a directory
Feb 16 11:44:15 qp pulseaudio[1432]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Not a directory
Feb 16 11:44:15 qp systemd[1380]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Feb 16 11:44:15 qp systemd[1380]: pulseaudio.service: Failed with result 'exit-code'.
Feb 16 11:44:15 qp systemd[1380]: Failed to start Sound Service.
```
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
Originally added in [1], and iwd added StateDirectory to its services
in [2] -- 4 days later.
("StateDirectory wasn't used when tmpfile snippet was added to NixOS")
(nevermind git -> release delay)
[1] 6e54e9253a
[2] upstream iwd git rev: 71ae0bee9c6320dae0083ed8c1700bc8fff1defb
Some display managers (e.g. SDDM) set the XDG_CURRENT_DESKTOP variable accroding to this parameter.
If this variable is not defined, there will be some problems (e.g. MATE doesn't have icons on the desktop).
Fixes https://github.com/NixOS/nixpkgs/issues/71427
invalid test was introduced in 297d1598ef
and it is disabled in the shipped daemon.conf.
I forgot to reflect that in the module, which caused the daemon to print the following on start-up:
FuEngine invalid has incorrect built version invalid
and the command to warn:
WARNING: The daemon has loaded 3rd party code and is no longer supported by the upstream developers!
To reduce the change of this happening in the future, I moved the list of default disabled plug-ins to the package expression.
I also set the value of the NixOS module option in the config section of the module instead of the default value used previously,
which will allow users to not care about these plug-ins.
We switched to unified default session option services.xserver.displayManager.defaultSession
and included fallback path for the legacy options. Unfortunately when only
services.xserver.windowManager.default is set and not services.xserver.desktopManager.default,
it got incorrectly converted to the new option.
This should fix that.
Closes: https://github.com/NixOS/nixpkgs/issues/76684
In 87a19e9048 I merged staging-next into master using the GitHub gui as intended.
In ac241fb7a5 I merged master into staging-next for the next staging cycle, however, I accidentally pushed it to master.
Thinking this may cause trouble, I reverted it in 0be87c7979. This was however wrong, as it "removed" master.
This reverts commit 0be87c7979.
I merged master into staging-next but accidentally pushed it to master.
This should get us back to 87a19e9048.
This reverts commit ac241fb7a5, reversing
changes made to 76a439239e.
* Fix documentation example for `jupyter.kernels`
The environment variable loading fails when using the example for `kernels` config, due to incorrect syntax. The error being something along the lines of `path not found`.
Thanks to @Infinisil and @layus for suggestions.
Minor incompatibilities due to moving to upstream defaults:
- capabilities are used instead of systemd.socket units
- the control socket moved:
/run/kresd/control -> /run/knot-resolver/control/1
- cacheDir moved and isn't configurable anymore
- different user+group names, without static IDs
Thanks Mic92 for multiple ideas.
Previously, some files were copied into the Nixpkgs tree, which meant
we wouldn't easily be able to update them, and was also just messy.
The reason it was done that way before was so that a few NixOS
options could be substituted in. Some problems with doing it this way
were that the _package_ changed depending on the values of the
settings, which is pretty strange, and also that it only allowed those
few settings to be set.
In the new model, mailman-web is a usable package without needing to
override, and I've implemented the NixOS options in a much more
flexible way. NixOS' mailman-web config file first reads the
mailman-web settings to use as defaults, but then it loads another
configuration file generated from the new services.mailman.webSettings
option, so _any_ mailman-web Django setting can be customised by the
user, rather than just the three that were supported before. I've
kept the old options, but there might not really be any good reason to
keep them.
We already had python3Packages.mailman, but that's only really usable
as a library. The only other option was to create a whole Python
environment, which was undesirable to install as a system-wide
package.
It's likely that a user might want to set multiple values for
relay_domains, transport_maps, and local_recipient_maps, and the order
is significant. This means that there's no good way to set these
across multiple NixOS modules, and they should probably all be set
together in the user's Postfix configuration.
So, rather than setting these in the Mailman module, just make the
Mailman module check that the values it needs to occur somewhere, and
advise the user on what to set if not.
This replaces all Mailman secrets with ones that are generated the
first time the service is run. This replaces the hyperkittyApiKey
option, which would lead to a secret in the world-readable store.
Even worse were the secrets hard-coded into mailman-web, which are not
just world-readable, but identical for all users!
services.mailman.hyperkittyApiKey has been removed, and so can no
longer be used to determine whether to enable Hyperkitty. In its
place, there is a new option, services.mailman.hyperkitty.enable. For
consistency, services.mailman.hyperkittyBaseUrl has been renamed to
services.mailman.hyperkitty.baseUrl.
Using a custom path in the Nix store meant that users of the module
couldn't add their own config files, which is a desirable feature. I
don't think avoiding /etc buys us anything.
This module allows root autoLogin, so we would break that for users, but
they shouldn't be using it anyways. This gives the impression like auto
is some special display manager, when it's just lightdm and special pam
rules to allow root autoLogin. It was created for NixOS's testing
so I believe this is where it belongs.
Motivation:
if enableQuota is true, mail plugins cannot be enabled in extraConfig
because of the problem described here:
https://doc.dovecot.org/configuration_manual/config_file/config_file_syntax/#variable-expansion
doveconf: Warning: /etc/dovecot/dovecot.conf line 8: Global setting
mail_plugins won't change the setting inside an earlier filter at
/etc/dovecot/dovecot.conf line 5 (if this is intentional, avoid this
warning by moving the global setting before /etc/dovecot/dovecot.conf
line 5)
The current module assumes use of iptables and breaks if nftables is
used instead.
This change configures the correct backend based on the
config.networking.nftables.enable setting.
Aligned systemd service config with the definition in the upstream repo:
https://github.com/Irqbalance/irqbalance/blob/master/misc/irqbalance.service#L7.
Other than adding some level of sandboxing it also fixes the "Daemon
couldn't be bound to the file-based socket." warning reported on
irqbalance startup due to the fact that the "/run/irqbalance" directory
didn't exist. The "RuntimeDirectory" property makes sure it gets
created. The aforementioned warning didn't cause any problems I could
spot though.
I have verified that both `irqbalance` as well as `irqbalance-ui` work
fine with this new systemd service config.
Previously if ~/.background-image wasn't present, the background would
be set to black, which would override what the user could
set in e.g. services.xserver.windowManager.i3.extraSessionCommands
According to https://repology.org/repository/nix_unstable/problems, we have a
lot of packages that have http links that redirect to https as their homepage.
This commit updates all these packages to use the https links as their
homepage.
The following script was used to make these updates:
```
curl https://repology.org/api/v1/repository/nix_unstable/problems \
| jq '.[] | .problem' -r \
| rg 'Homepage link "(.+)" is a permanent redirect to "(.+)" and should be updated' --replace 's@$1@$2@' \
| sort | uniq > script.sed
find -name '*.nix' | xargs -P4 -- sed -f script.sed -i
```
* nixos/buildkite: drop user option
This reverts 8c6b1c3eaa.
Turns out, buildkite-agent has logic to write .ssh/known_hosts files and
only really works when $HOME and the user homedir are in sync.
On top of that, we provision ssh keys in /var/lib/buildkite-agent, which
doesn't work if that other users' homedir points elsewhere (we can cheat
by setting $HOME, but then getent and $HOME provide conflicting
results).
So after all, it's better to only run the system-wide buildkite agent as
the "buildkite-agent" user only - if one wants to run buildkite as
different users, systemd user services might be a better fit.
* nixosTests.buildkite-agent: add node with separate user and no ssh key
There is no need to stop/start the unit when the machine is online or
offline.
This should fix the shutdown locking issues.
nixos zerotier: sometimes it doesn't shutdown
On numerous occasions I have seen users mistake this
module as libinput because it being called "multitouch"
and them being unaware that the actually module they want
is libinput. They then run into several decrepit bugs due
to the completely out-of-date nature of the underlying package.
The underlying package hasn't been changed to an up-to-date
fork in a period of 8 years. I don't consider this to be production quality.
However, I'm not opposed for the module being readded to NixOS
with new packaging, and a better name.
Some things were provided by default, some by systemd unit and some
were just miraculously working. This turns them into explicit
dependencies of the package itself, making everything properly
overrideable.
+ providing glibcLocales fixes elixir compile warnings
+ providing systemd dependency allows rabbit to use systemctl for unit
activation check instead of falling back to sleep. This was seen as
a warning during startup.
The php installer creates a random one, but we bypass it, so we have
to create one ourselves.
This should be backward compatible as encryption is used for session
cookies only: users at the time of the upgrade will be logged out but
nothing more.
259b7fa065/config/config.inc.php.sample (L73)
If the database is local, use postgres peer authentication.
Otherwise, use a password file.
Leave database initialisation to postgresql.ensure*.
Leave /var/lib/roundcube creation to systemd.
Run php upgrade script as unpriviledged user.
This gets passed to BUILDKITE_SHELL, which will specify the shell being
used to executes script in.
Defaults to `${pkgs.bash}/bin/bash -e -c`, matching how buildkite
behaves on other distros.
SSH public keys aren't needed to clone private repos, and if we only
need to configure a single attribute, there's no need for the "openssh"
attrset anymore.
This applies [hydra PR #432](https://github.com/NixOS/hydra/pull/432)
to the NixOS module in nixpkgs:
```
commit 4efd078977e5ea20e1104783efc324cba11690bc
Author: Bas van Dijk <v.dijk.bas@gmail.com>
Date: Sun Dec 11 15:35:38 2016 +0100
Only set buildMachinesFiles when nix.buildMachines is defined
```
The following commit from 2016 in hydra removed the `--option
build-use-substitutes` from the hydra-queue-runner service:
```
commit ee2e9f5335c8c0288c102975b506f6b275793cfe
Author: Eelco Dolstra <edolstra@gmail.com>
Date: Fri Oct 7 20:23:05 2016 +0200
Update to reflect BinaryCacheStore changes
BinaryCacheStore no longer implements buildPaths() and ensurePath(),
so we need to use copyPath() / copyClosure().
```
It would be better if the hydra module in NixOS matches the upstream
module.
This replaces some hardcoded values in nginx's VirtualHosts's
configuration with customizable options. Previous values are kept as
default, so nothing should break for existing users.
Co-Authored-By: Florian Klink <flokli@flokli.de>
slapd does only print the error and not the line number.
Sometimes it is not even clear that it fails to start
due to an incorrect configuration file.
Example output of slaptest:
5e1b2179 /nix/store/gbn2v319d4qgw851sg41mcmjm5dpn39i-slapd.conf: line 134 objectClass: Missing closing parenthesis before end of input
ObjectClassDescription = "(" whsp
numericoid whsp ; ObjectClass identifier
[ "NAME" qdescrs ]
[ "DESC" qdstring ]
[ "OBSOLETE" whsp ]
[ "SUP" oids ] ; Superior ObjectClasses
[ ( "ABSTRACT" / "STRUCTURAL" / "AUXILIARY" ) whsp ]
; default structural
[ "MUST" oids ] ; AttributeTypes
[ "MAY" oids ] ; AttributeTypes
whsp ")"
slaptest: bad configuration file!
Currently there is no way to set game settings, such as administrators.
extraSettings allows users to override default game settings without
adding many more settings.
The package option allows users to use the experimental version, or
override to a specific version with their own modified package.
Supporting a path here is important because it allows e.g. fetching a
configuration from a URL. To do this and provide the configuration as
a string, IFD would be necessary. It's just written into a path
anyway.
Fixes this error from `nixos-rebuild switch` introduced by #75893:
setting up tmpfiles
[/etc/tmpfiles.d/nixos.conf:7] Invalid age 'yes'.
warning: error(s) occurred while switching to the new configuration
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
###### Motivation for this change
With space between two options, multiple options just don't work
Looks like xkbOptions then used for generation of xorg.conf.d/00-keyboard.conf.
kbd's man says XkbOptions must be comma-separated without spaces.
https://linux.die.net/man/4/kbd
###### Things done
<!-- Please check what applies. Note that these are not hard requirements but merely serve as information for reviewers. -->
- [ ] Tested using sandboxing ([nix.useSandbox](http://nixos.org/nixos/manual/options.html#opt-nix.useSandbox) on NixOS, or option `sandbox` in [`nix.conf`](http://nixos.org/nix/manual/#sec-conf-file) on non-NixOS linux)
- Built on platform(s)
- [ ] NixOS
- [ ] macOS
- [ ] other Linux distributions
- [ ] Tested via one or more NixOS test(s) if existing and applicable for the change (look inside [nixos/tests](https://github.com/NixOS/nixpkgs/blob/master/nixos/tests))
- [ ] Tested compilation of all pkgs that depend on this change using `nix-shell -p nixpkgs-review --run "nixpkgs-review wip"`
- [ ] Tested execution of all binary files (usually in `./result/bin/`)
- [ ] Determined the impact on package closure size (by running `nix path-info -S` before and after)
- [ ] Ensured that relevant documentation is up to date
- [ ] Fits [CONTRIBUTING.md](https://github.com/NixOS/nixpkgs/blob/master/.github/CONTRIBUTING.md).
###### Notify maintainers
cc @
Currently if you specify home to be someplace else than ~/ for user
then Transmissions always attempts to load the config from the
default location which is $HOME/.config/transmission-daemon based on documentation:
https://github.com/transmission/transmission/wiki/Configuration-Files
Which means that the changes done to the config under settingsDir in
ExecPreStart have no effect because they are modifying a file that is never loaded.
I've added an explicit --config-dir ${settingsDir} to make sure
that Transmission loads the correct config file even when home is changed.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
* structured config for main config file allows to launch nagios in
debug mode without having to write the whole config file by hand
* build time syntax check
* all options have types, one more example
* I find it misleading that the main nagios config file is linked in
/etc but that if you change the link in /etc/ and restart nagios, it
has no effect. Have nagios use /etc/nagios.cfg
* fix paths in example nagios config files, which allows to reuse it:
services.nagios.objectDefs =
(map (x: "${pkgs.nagios}/etc/objects/${x}.cfg")
[ "templates" "timeperiods" "commands" ]) ++ [ ./main.cfg ]
* for the above reason, add mailutils to default plugins
Co-Authored-By: Aaron Andersen <aaron@fosslib.net>
xsession gets passed `dm` `wm`, so the desktop manager would be launched
before the window manager resulting in a regular desktop manager
session.
Fixes https://github.com/NixOS/nixpkgs/issues/76625
The commit b0bbacb521 was a bit too fast
It did set executable bit for log files.
Also, it didn't account for other directories in state dir:
```
# ls -la /var/spool/nginx/
total 32
drwxr-x--- 8 nginx nginx 4096 Dec 26 12:00 .
drwxr-xr-x 4 root root 4096 Oct 10 20:24 ..
drwx------ 2 root root 4096 Oct 10 20:24 client_body_temp
drwx------ 2 root root 4096 Oct 10 20:24 fastcgi_temp
drwxr-x--- 2 nginx nginx 4096 Dec 26 12:00 logs
drwx------ 2 root root 4096 Oct 10 20:24 proxy_temp
drwx------ 2 root root 4096 Oct 10 20:24 scgi_temp
drwx------ 2 root root 4096 Oct 10 20:24 uwsgi_temp
```
With proposed change, only ownership is changed for state files, and mode is left as is
except that statedir/logs is now group accessible.
This change brings pre-existing installations (where the logfiles
are owned by root) in line with the new permssions (where logfiles
are owned by the nginx user)
Currently to run borg job manually, you have to use systemctl:
```
$ systemctl start borgbackup-job-jobname.service
```
This commit makes wrappers around borg jobs available in $PATH, which have
BORG_REPO and connection args set correctly:
```
$ borg-job-jobname list
$ borg-job-jobname mount ::jobname-archive-2019-12-25T00:01:29 /mnt/some-path
$ borg-job-jobname create ::test /some/path
```
Closes: https://github.com/NixOS/nixpkgs/pull/64888
Co-authored-by: Danylo Hlynskyi <abcz2.uprola@gmail.com>
Also cleanup a bit, we enabled gnome-settings-daemon even when using elementary-settings-daemon.
I wanted the nixos module ascribe the defaults, not these lists in pkgs.
Deperecates the interfaces option which was used to generate a host:port
list whereas the port was always hardcoded to 53. This unifies the
listen configuration for plain and TLS sockets and allows to specify a
port without an address for wildcard binds.
Systemd dependencies for scripted mode
were refactored according to analysis in #34586.
networking.vswitches can now be used with systemd-networkd,
although they are not supported by the daemon, a nixos receipe
creates the switch and attached required interfaces (just like
the scripted version).
Vlans and internal interfaces are implemented following the
template format i.e. each interface is
described using an attributeSet (vlan and type at the moment).
If vlan is present, then interface is added to the vswitch with
given tag (access mode). Type internal enabled vswitch to create
interfaces (see openvswitch docs).
Added configuration for configuring supported openFlow version on
the vswitch
This commit is a split from the original PR #35127.
The upstream session files display managers use have no concept of sessions being composed from
desktop manager and window manager. To be able to set upstream session files as default
session, we need a single option. Having two different ways to set default session would be confusing,
though, so we decided to deprecate the old method.
We also created separate script for each session, just like we already had a separate desktop
file for each one, and started using displayManager.sessionPackages mechanism to make the
session handling more uniform.
There's two ways of providing graphical sessions now:
- `displayManager.session` via. `desktopManager.session` and
`windowManager.session`
- `displayManager.sessionPackages`
`sessionPackages` doesn't make a distinction between desktop and window
managers. This makes selecting a session provided by a package using
`desktopManager.default` nonsensical.
We therefor introduce `displayManager.defaultSession` which can select a session
from either `displayManager.session` or `displayManager.sessionPackages`.
It will default to `desktopManager.default + windowManager.default` as before.
If the dm default is "none" it will select the first provided session from
`sessionPackages`.
+ Fixing interrupted descriptions
+ Added more verbose descriptions
+ Addded <literal> to the descriptions
+ uniformly reformated descriptions to break at 80 chars
(cherry picked from commit c7945c8a97df52a468cf32155154cdec021561bc)
Having a default session resulted in GDM not remembering the last used
session.
So do not force the session until setSessionScript is made aware of the
last session used.
A centralized list for these renames is not good because:
- It breaks disabledModules for modules that have a rename defined
- Adding/removing renames for a module means having to find them in the
central file
- Merge conflicts due to multiple people editing the central file
Allow the user to specify the permissions to apply to download folders
used by transmission. This is useful e.g. when they are stored on a
network share and accessed by other users.
This commit also makes the home and config directories 700, as there
is should be no need for wider permissions there.
Only use sudo if we are currently not running as the nextcloud user.
This is problematic when occ is called from a systemd service with
NoNewPrivileges=true
In the process of making UPower.conf customizable (#73968), it came up
that UPower doesn't load its config from /etc by default.
The UPower derivation is modified to make it load its config from /etc
at runtime, but still install the default config to its nix store path
as before.
The UPower module is modified to put the config in /etc.
When session debugging was enabled in GNOME but not in Pantheon
{
services.xserver = {
desktopManager.pantheon = {
enable = true;
};
desktopManager.gnome3 = {
enable = true;
debug = true;
};
};
}
it caused a conflict:
error: The option `environment.sessionVariables.GNOME_SESSION_DEBUG' has conflicting definitions, in `<nixpkgs/nixos/modules/services/x11/desktop-managers/pantheon.nix>' and `<nixpkgs/nixos/modules/services/x11/desktop-managers/gnome3.nix>'.
Didn't notice this till I tried removing my custom roon user from the one I was testing with. There's not a 'groups' option for users, only group (primary group) and extraGroups. Use these.
(#68337)
Samba 3 has been discontinued since Q1/2015. So I think it's time
to just wipe it from the pkgs. FuseSMB is pretty much abandoned,
upstream does not exist and it's also not as useful as it used to
be anyways.
osquery was marked as broken since April.
If somebody steps up to fix it, we can always revive it from the
histroy, but there's not much value in shipping completely broken things
in current master.
cc @ma27
As part of the networking.* name space cleanup, connman should be moved
to services.connman. The same will happen for example with
networkmanager in a separate PR.
The binary name was recently changed from openarena-server to oa_ded in
https://github.com/NixOS/nixpkgs/pull/71122 .
That change broke the openarena module and consequently the openarena
test too. This commit fixes both.
As an alternative, we considered reverting the name change in
https://github.com/NixOS/nixpkgs/pull/72824 but we decided oa_ded was
a better name for the binary (it's the name upstream use).
Unfortunately, you can't configure the default user-session
with GDM like lightdm. I've opened a feature request [0]
but I'd like to be able to do this now.
We use a GObject Python script using bindings to AccountsService
to achieve this. I'm hoping the reliable heuristic for session names
is the file's basename. We also have some special logic for which
method to use to set the default session. It seems set_x_session is
deprecated, and thusly the XSession key, but if that method isn't used
when it's an xsession it won't be the default in GDM.
[0]: https://gitlab.gnome.org/GNOME/gdm/issues/535
- Add services.hardware.bluetooth.config option
- Use lib.generators.toINI with both config and extraConfig options
hardware/bluetooth: a couple suggestions
Co-authored-by: Aaron Andersen <aaron@fosslib.net>
The new description should give more clear understanding of when to
edit the option.
I used NixOS to set up a DNS server that is authoritative for certain
zones. The description of the `cacheNetworks` option made me think I
needed to set it to `"any"` to allow people to query the zone I set
up. Reading the source of the module would have clarified my
understanding, but at the time I just read the description and thought
little of it. Later I discovered I was getting tons of DNS requests
and presumably being used for a DNS amplification attack or similar.
I have fixed the problem now, but I would like the option to have a
clearer description so others don't make the same mistake I did.
most likely, people enabling the lorri module also want to use it,
without explicitly having to add it to users.users.<username>.packages.
cc @curiousleo @Profpatsch
Add a virtual user system based around pam and a Berkeley
user database.
Adding the:
- localRoot
- userDbPath
- allowWriteableChroot
- virtualUseLocalPrivs
Vsftpd options.
Ever since setting up bonding the `wpa_supplicant-unit-start` script has
been failing. This is because the file `bonding_masters` in
`/sys/class/net/` is *not* a directory containing `uevent`.
Adding a test to verify the `uevent` path to be sourced exists resolves
the problem.
The SLIM project is abandoned and their last release was in 2013.
Because of this it poses a security risk to systems, no one is working
on it or picked up maintenance. It also lacks compatibility with systemd
and logind sessions. For users, there liikely isn't anything like slim
that's as lightweight in terms of dependencies.
Slurmdbd requires a password database which is stored in slurmdbd.conf.
A seperate config file avoids that the password ends up in the nix store.
Slurmdbd does 19.5 does not support MySQL socket conections.
Adapated the slurm test to provide username and password.
* Fix path in module for slurm to find plugstack.conf
* Fix configure flags so that slurm can be compiled
without internal X11 support (required for spank-x11).
This prevents services to be started before they're initialized, and
renders the `systemd.targets.ceph.wantedBy = lib.mkForce [];` hack in
the vm tests obsolete - The config now starts up ceph after a reboot,
too.
Let's take advantage of that, crash all VMs, and boot them up again.
Don't pass user and group to ceph, and rely on it to drop ceps, but let
systemd handle running it as the appropriate user.
This also inlines the extraServiceConfig into the makeService function,
as we have conditionals depending on daemonType there anyways.
Use StateDirectory to create directories in
/var/lib/ceph/${daemonType}/${clusterName}-${daemonId}.
There previously was a condition on daemonType being one of mds,mon,rgw
or mgr. We only instantiate makeServices with these types, and "osd" was
special.
In the osd case, test examples suggest it'd be in something like
/var/lib/ceph/osd/ceph-${cfg.osd0.name} - so it's not special at all,
but exactly like the pattern for the others.
During initialization, we also need these folders, before the unit is
started up. Move the mkdir -p commands in the vm tests to the line
immediately before they're required.
The two new options make it possible to create the interface in one namespace
and move it to a different one, as explained at https://www.wireguard.com/netns/.
In cases where you boot up really quickly (like in the VM test on a
non-busy host), tinydns might want to bind before the loopback interface
is fully up. Order tinydns after network.target to fix that.
Incorrect merging of modules resulted in dhcpcd being enabled causing flaky network connection.
https://github.com/NixOS/nixpkgs/pull/64364
Fixing it uncovered an infinite recursion from the same commit, previously masked by the incorrect merge.
We can just drop the `mkDefault` for `networking.wireless.enable` as it is already `false` by default.
Closes: https://github.com/NixOS/nixpkgs/issues/72416
When we did the revert of adding gnome-flashback to systemd.packages [0]
I forgot to test with other display managers. If we use GDM with gnome-flashback
it appears it doesn't try to fallback to non-systemd startup and always fails and
starts the regular gnome-session. So adding gnome-flashback to systemd.packages
was perfectly fine, but we did forgot one detail. We need systemd targets for the
customSessions which is added using mkSystemdTargetForWm in the gnome-
flashback package.
[0]: 42f567b30d
This change ensures that `dhcpcd.service` is restarted as soon as the
exit hook changes. I use this hook to do additional configuration for my
network (like setting a route via the given gateway to my WireGuard) and
when changing parts of this exit hook I'd expect to get this activated
when switching to my new configuration.
When the option services.vault.storageBackend is set to "file", a
systemd.tmpfiles.rules was added, with extraneous []. These are not
needed and have been removed.
This is a good example of a package/module that should be distributed
externally (e.g. as a flake [1]): it's not stable yet so anybody who
seriously wants to use it will want to use the upstream repo. Also,
it's highly specialized so NixOS is not really the right place at the
moment (every NixOS module slows down NixOS evaluation for everybody).
[1] https://github.com/edolstra/jormungandr/tree/flake
Instead of assign the libinput options to touchpad devices only, it
should be appied by any device using libinput.
Due to the fact that `40-libinput.conf` already defines libinput as
driver for any detected input device, we can use `MatchDriver` to appy
options.
I've noticed a similar issue in Pantheon, without this
sound theme installed there's no system sounds.
I believe it's because the gnome theme and the pantheon
theme inherit this one.
It seems that dnsdist doesn't actually request CAP_NET_BIND_SERVICE, which is why normally it's executed and root and setuids to another, unprivileged, user. This means that as it is, dnsdist will be unable to bind to any port under 1024 and will fail with access denied.
Removing CAP_SETGID and CAP_SETUID is also related to this as we don't actually change the uid or gid after the fact as we use DynamicUser. (That part isn't strictly NEEDED but there's no reason to have those capabilities if we don't use them).
There are also some additional sandboxing we can remove from the service definition as they are assumed true or strict by DynamicUser: specifically PrivateTmp and ProtectSystem respectively.
ProtectHome is still there, despite being assumed read-only as setting it to true means they are seen as empty. I don't think it really matters as I don't know if systemd will ignore it or not, but I didn't see any reason to go hunting for excuses to make it a bigger change.
- spawn the geoclue-agent directly instead of running it via bash
- document why we cannot use DynamicUser = true
- have systemd create the home directory instead of using an explicit
tmpfiles.d fragment
* lm_sensors: add fancontrol module + nixos test
fancontrol is a small script that checks temperature sensors and adapts
fan speeds accordingly. It reads a text config file that can be
auto-generated by running the pwmconfig wizard on the live system.
Default behavior is to continue executing the script even when one or
multiple steps fail. We want to abort early if any part of the
initialization fails to not run with a partially initialized state.
Default behavior also allows dereferencing non-existent variables,
potentially resulting in hard-to-find bugs.
This option was removed because allowing (multiple) regular users to
override host entries affecting the whole system opens up a huge attack
vector. There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using networking.hosts,
provide them via the DNS server in your network, or use
networking.networkmanager.appendNameservers to point your system to
another (local) nameserver to set those entries.
This reverts commit 60aedadc59.
Using tests from #71212 I am now unable to reproduce there being issues
with starting the default metacity flashback session without this.
On start, unicorn, sidekiq and other parts running ruby code emits
quite a few warnings similar to
/var/gitlab/state/config/application.rb:202: warning: already initialized constant Gitlab::Application::LOOSE_EE_APP_ASSETS
/nix/store/ysb0lgbzxp7a9y4yl8d4f9wrrzy9kafc-gitlab-ee-12.3.5/share/gitlab/config/application.rb:202: warning: previous definition of LOOSE_EE_APP_ASSETS was here
/var/gitlab/state/lib/gitlab.rb:38: warning: already initialized constant Gitlab::COM_URL
/nix/store/ysb0lgbzxp7a9y4yl8d4f9wrrzy9kafc-gitlab-ee-12.3.5/share/gitlab/lib/gitlab.rb:38: warning: previous definition of COM_URL was here
This seems to be caused by the same ruby files being evaluated
multiple times due to the paths being different - sometimes they're
loaded using the direct path and sometimes through a symlink, due to
our split between config and package data. To fix this, we make sure
that the offending files in the state directory always reference the
store path, regardless of that being the real file or a symlink.
We create a wrapper which launches gnome-shell with the correct environment and
cap_sys_nice.
We can then override gnome-shell-wayland.service to use this wrapper.
NOTE: We need to force clear the environment, because the defaults aren't good
for user services. That should probably be fixed.
Otherwise connecting simply fails:
VPN connection: failed to connect: 'La création du fichier « /tmp/lib/NetworkManager-fortisslvpn/0507e3ef-f0e0-4153-af64-b3d9a025877c.config.XSB19Z » a échoué : No such file or directory'
This reverts commit 2ee14c34ed.
This caused the initializers directory to be cleaned out while gitlab
was running in some instances. We clean out the directory on the
preStart stage already, so ensuring existance and permissions should
suffice.
This fixes an issue with a recent addition of a config file
check in c28ded36ef.
Previously it was possible to supply a path as a string
to `configFile`. Now it will fail checking the config file
during evaluation of the module due to sandboxing.
A toggle to disable the check, more informative log messages
and handling for various configFile values are added.
This session would fail to start because we didn't have it in systemd.packages
(as we've switched to systemd gnome-session).
Haven't tested custom sessions.
Bumps `matrix-synapse` to version 1.4.0[1]. With this version the
following changes in the matrix-synapse module were needed:
* Removed `trusted_third_party_id_servers`: option is marked as deprecated
and ignored by matrix-synapse[2].
* Added `account_threepid_delegates` options as replacement for 3rdparty
server features[3].
* Added `redaction_retention_period` option to configure how long
redacted options should be kept in the database.
* Added `ma27` as maintainer for `matrix-synapse`.
Co-Authored-By: Notkea <pacien@users.noreply.github.com>
Co-authored-by: Maximilian Bosch <maximilian@mbosch.me>
[1] https://matrix.org/blog/2019/10/03/synapse-1-4-0-released
[2] https://github.com/matrix-org/synapse/pull/5875
[3] https://github.com/matrix-org/synapse/pull/5876
This fixes a regression from bb649d96b0.
There were permission problems, when the preStart script tried to copy
the smokeping.fcgi file over the old file.
When having backup jobs that persist to a removable device like an
external HDD, the directory shouldn't be created by an activation script
as this might confuse auto-mounting tools such as udiskie(8).
In this case the job will simply fail, with the former approach
udiskie ran into some issues as the path `/run/media/ma27/backup` was
already there and owned by root.
This option was added by mistake since `listenAddress` exists by default
for each prometheus-exporter. Using
`services.prometheus.exporters.wireguard.addr` will now cause a warning,
but doesn't break eval.
Having `display-manager` conflict with `plymouth-quit` causes this lock up:
- `plymouth-quit-wait` starts up, waiting for plymouth-quit to run
- `lightdm` starts up
- `plymouth-quit` can't start, it conflicts with lightdm
- `plymouth-quit-wait` keeps waiting on plymouth-quit to kill plymouthd
The idea is having LightDM control when plymouth quits, but communication with
plymouth was broken: https://github.com/NixOS/nixpkgs/pull/71064
Unfortunately having the conflict breaks switching to configurations with
plymouth enabled. So we still need to remove the conflict.
fixes#71034
In fact, don't create them at all because Nix does that automatically.
Also remove modules/programs/shell.nix because everything it did is
now done automatically by Nix.
gitlab:db:configure prints the root user's password to stdout on
successful setup, which means it will be logged to the
journal. Silence this informational output. Errors are printed to
stderr and will thus still be let through.
The mime type definitions included with nginx are very incomplete, so
we use a list of mime types from the mailcap package, which is also
used by most other Linux distributions by default.
xfce4-volumed-pulse is not abandoned, but is superseded by a panel
plugin which is not available when not using the desktop.
Fixes: volume up/down keys support
These improvements come from shopping around
at what other downstreams have done with their
systemd units and recent changes like [0] to gdm.
Note there's no requries or after on dbus.socket because
settings BusName will set this up automaticallly and
give it a type of dbus.
[0]: 2d57f45962
The initializers directory is populated with files from the gitlab
distribution on start, but old files will be left in the state folder
even if they're removed from the distribution, which can lead to
startup failures. Fix this by always purging the directory on start
before populating it.
Since the preStart script is no longer running in privileged mode, we
reassign the files in the state directory and its config subdirectory
to the user we're running as. This is done by splitting the preStart
script into a privileged and an unprivileged part where the privileged
part does the reassignment.
Also, delete the database.yml symlink if it exists, since we want to
create a real file in its place.
Fixes#68696.
This introduces an option wifi.backend to the networkmanager module.
Co-authored-by: Cole Mickens <cole.mickens@gmail.com>
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
GNOME initial setup's run is conditioned on whether
the gnome-initial-setup-done file exists in XDG_CONFIG_HOME
Because of this, every existing user will have initial setup
running because they never ran it before.
To prevent this we create the file if the users stateVersion
is older than 20.03 (the release we added this module).
Also drop uneeded manual conflicts as systemd.packages
does handle this.
- register gnome-session and gnome-settings-daemon services.
- gnome-shell is already registered due to having a xdg portal
- manually specify that gsd is wanted by gnome-session
(systemd.packages doesn't pick the .wants directories for some reason)
GDM is now killed if tty1 is started after gdm is launched. This follows
upstream's gdm service config.
This might cause problems with nixos-rebuild switch though. See the reasoning
and work that led to not following upstream on this:
https://github.com/NixOS/nixpkgs/issues/214394a180dac46d4da
We don't want to ignore config that can mess up machines. In general
this should always fail evaluation, as you think you are changing
behaviour and don't, which can easily create run-time errors we can
catch early.
https://github.com/MindFlavor/prometheus_wireguard_exporter/releases/tag/3.1.1
This release adds a flag `-l` which takes an address where the exporter
is available. The default is `0.0.0.0` (previously, `0.0.0.0` was used
by default).
Please note that there are no dependency changes in Cargo and therefore
the cargo hash didn't change.
Since version 2.3 (https://github.com/NixOS/nix/pull/2949 which was
cherry-picked to master) Nix issues a warning when --no-net wasn't
passed and there is no network interface. This commit adds the --no-net
flag to the nix.conf check such that no warning is issued.
This commits makes it clearer to a novice reader how to configure several
diferent types of SSID connections that were otherwise obscurely documented
Resolves#66650
Quoting from the splitString docstring:
NOTE: this function is not performant and should never be used.
This replaces trivial uses of splitString for splitting version
strings with the (potentially builtin) splitVersion.
Fixes eval on darwin after #69072
Resolved conflict in pkgs/tools/security/thc-hydra/default.nix
Basically had to revert a1c0e10564 which
adapts #69210 to master that doesn't yet have
329a88efa7
Tested using maintainers/scripts/eval-release.sh before and after to see
that the fix works
This commit adds a Strict-Transport-Security header to
the nginx config file generated by the nextcloud module.
The Strict-Transport-Security header is recommended in
official guide for hardening Nextcloud installations:
https://docs.nextcloud.com/server/16/admin_manual/installation/harden_server.html
Further, if it is not set, we see a warning in the security scan results
in the Nextcloud admin panel:
```
The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips
```
Make sure that we don't create a database if we're not going to
connect to it. Also, fix the assertion that usernames be equal to only
trig when peer authentication is used (databaseHost == "").
config.services.postgresql.package is only defined when the postgresql
service is activated, which means we fail to evaluate when
databaseCreateLocally == false. Fix this by using the default
postgresql package when the postgresql service is disabled.
The state path now, since the transition from initialization in
preStart to using systemd-tmpfiles, has the following restriction: no
parent directory can be owned by any other user than root or the user
specified in services.gitlab.user. This is a potentially breaking
change and the cause of the error isn't immediately obvious, so
document it both in the release notes and statePath description.
These are the leftovers of an older PR.
a. Send messages to auditd if auditing is enabled.
b. Add missing dbus configuration if dnsmasq is used for DNS
Fixes problems such as:
systemd[1]: Failed to put bus name to hashmap: File exists
systemd[1]: dbus-org.freedesktop.nm-dispatcher.service: Two services allocated for the same bus name org.freedesktop.nm_dispatcher, refusing operation.
Problem is that systemd treats symlinks to files outside the service
path differently, causing our old workaround to look like two separate services.
These symlinks are intended to be a means for manually emulating
the behavior of the `Alias=` directive in these services.
Unfortunately even making these symlinks relative isn't enough,
since they don't make it to where it matters--
that only makes the links in /etc/static/systemd/system/*
relative, with systemd still being shown non-relative links
in /etc/systemd/system/*.
To fix this, drop all of this at the package level
and instead simply specify the aliases in the NixOS modules.
Also handle the same for modemmanager,
since the networkmanager NixOS module also handles that.
During the last update, `hydra-notify` was rewritten as a daemon which
listens to postgresql notifications for each build[1]. The module
uses the `hydra-notify.service` unit from upstream's Hydra module and
the VM test ensures that email notifications are sent properly.
Also updated `hydra-init.service` to install `pg_trgm` on a local
database if needed[2].
[1] c7861b85c4
[2] 8a0a5ec3a3
Fixes problems such as:
systemd[1]: Failed to put bus name to hashmap: File exists
systemd[1]: dbus-org.freedesktop.nm-dispatcher.service: Two services allocated for the same bus name org.freedesktop.nm_dispatcher, refusing operation.
Problem is that systemd treats symlinks to files outside the service
path differently, causing our old workaround to look like two separate services.
These symlinks are intended to be a means for manually emulating
the behavior of the `Alias=` directive in these services.
Unfortunately even making these symlinks relative isn't enough,
since they don't make it to where it matters--
that only makes the links in /etc/static/systemd/system/*
relative, with systemd still being shown non-relative links
in /etc/systemd/system/*.
To fix this, drop all of this at the package level
and instead simply specify the aliases in the NixOS modules.
Also handle the same for modemmanager,
since the networkmanager NixOS module also handles that.
IE6 is long gone and this directive is not useful anymore. We can
spare a few CPU cycles (and maybe skip some bugs) by not trying to
disable gzip for MSIE6.
This option was added in 6336048c58 but it
is essentially a complete duplicate of the existing cfg.servers and
there seems to be no reason to keep maintaining it.
Furthermore, it requires annoying duplication if you try to do option
merging, e.g. merging in sets into your configuration.nix that add
`services.chrony.initstepslew` options will overwrite the servers option
unless you keep it, but that means you just have to duplicate
config.networking.timeServers again anyway which is an implementation
detail!
Signed-off-by: Austin Seipp <aseipp@pobox.com>
'iburst' allows chrony to make very quick adjustments to the clock by
doing a couple rapid measurements outside of the default 'minpoll'
option. This helps improve rapid time adjustment at boot, and is enabled
by default.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This is reckless, ill-advised, pointless, and I will be scorned for it,
but it makes me feel a lot better.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
When mailman-web restarts, it removes the generated "static" directory. This
breaks a currently running httpd process, which needs a re-start, too, to
obtain a new handle for the newly generated path.
Rules are a translation of what's done in the
GDM module and adjustments based of looking at
Arch Linux's configuration and upstream's.
A side effect of this change is that gnome-keyring
and kwallet modules should work as expected when in-
cluded.
Fixes#64259#62045
Adds the ability to make any parameter specified in extraConfig secret
by defining it an attrset containing the attr _secret, which in turn
is a path to a file containing the actual secret.
Use the postgresql module to provision a local db (if
databaseCreateLocally is true) instead of doing this locally.
Switch to using the local unix socket for db connections by default;
this is needed since dbs created by the postgresql module only support
peer authentication.
Instead of running the rake tasks db:schema:load, db:migrate and
db:seed_fu, run gitlab:db:configure, which in turn runs these tasks
when needed.
Solves issue #53852 for gitlab.
Add support for storing secrets in files outside the nix store, since
files in the nix store are world-readable and secrets therefore can't
be stored safely there.
The old string options are kept, since they can potentially be handy
for testing purposes, but their descriptions now state that they
shouldn't be used in production. The manual section is updated to use
the file options rather than the string options and the tests now test
both.
* remove kinetic
* release note
* add johanot as maintainer
nixos/ceph: create option for mgr_module_path
- since the upstream default is no longer correct in v14
* fix module, default location for libexec has changed
* ceph: fix test
* maintain only one version
* ceph-client: init
* include ceph-volume python tool in output
nixos/ceph: extraConfig, fix test, wait for ceph-mgr to become active
* run ceph with disk group permission
* add extraConfig option for the global section
needed per cluster
* clear up how ceph.conf is generated
* fix ceph testcase
Since we moved gsettings-desktop-schemas to top-level, gnome3.glib-networking was the same as glib-networking.
We could try to make the top-level variant not depend on gsettings-desktop-schemas again but that is probably
pointless, as the dependency is rather small compared to things like libproxy. Instead, we will just drop
the package in gnome3 attr set and always rely on the top-level expression.
Since https://github.com/NixOS/nixpkgs/pull/61321, local-fs.target is
part of sysinit.target again, meaning units without
DefaultDependencies=no will automatically depend on it, and the manual
set dependencies can be dropped.
The redis module currently fails to start up, most likely due to running
a chown as non-root in preStart.
While at it, I hardcoded it to use systemd's StateDirectory and
DynamicUser to manage directory permissions, removed the unused
appendOnlyFilename option, and the pidFile option.
We properly tell redis now it's daemonized, and it'll use notify support
to signal readiness.
Adds:
- gnome-color-manager
- services.avahi
It appears that GeoClue requires its daemon and IIRC has
been default enabled in other distros for a while.
- orca
It's the default screen-reader.
Any system uid will do, so we let the system allocate
one for us. The 'mailman' group is gone entirely since
we don't need it. Users who wish to run the 'mailman'
administration utility can do so via 'sudo':
$ sudo -u mailman mailman info
Also, simplify the syntax of our user.users entry to
rely on an attribute set rather than a list.
* nixos/acme: Fix ordering of cert requests
When subsequent certificates would be added, they would
not wake up nginx correctly due to target units only being triggered
once. We now added more fine-grained systemd dependencies to make sure
nginx always is aware of new certificates and doesn't restart too early
resulting in a crash.
Furthermore, the acme module has been refactored. Mostly to get
rid of the deprecated PermissionStartOnly systemd options which were
deprecated. Below is a summary of changes made.
* Use SERVICE_RESULT to determine status
This was added in systemd v232. we don't have to keep track
of the EXITCODE ourselves anymore.
* Add regression test for requesting mutliple domains
* Deprecate 'directory' option
We now use systemd's StateDirectory option to manage
create and permissions of the acme state directory.
* The webroot is created using a systemd.tmpfiles.rules rule
instead of the preStart script.
* Depend on certs directly
By getting rid of the target units, we make sure ordering
is correct in the case that you add new certs after already
having deployed some.
Reason it broke before: acme-certificates.target would
be in active state, and if you then add a new cert, it
would still be active and hence nginx would restart
without even requesting a new cert. Not good! We
make the dependencies more fine-grained now. this should fix that
* Remove activationDelay option
It complicated the code a lot, and is rather arbitrary. What if
your activation script takes more than activationDelay seconds?
Instead, one should use systemd dependencies to make sure some
action happens before setting the certificate live.
e.g. If you want to wait until your cert is published in DNS DANE /
TLSA, you could create a unit that blocks until it appears in DNS:
```
RequiredBy=acme-${cert}.service
After=acme-${cert}.service
ExecStart=publish-wait-for-dns-script
```
The custom session script is always executed (when it exists). This change
passes the selected session script and select session name to the custom session
script, so that it can defer to the selected session script based on the value
of the selected session name.
The `keys.target` is used to indicate whether all NixOps keys were
successfully uploaded on an unattended reboot. However this can cause
startup issues e.g. with NixOS containers (see #67265) and can block
boots even though this might not be needed (e.g. with a dovecot2
instance running that doesn't need any of the NixOps keys).
As described in the NixOps manual[1], dependencies to keys should be
defined like this now:
``` nix
{
systemd.services.myservice = {
after = [ "secret-key.service" ];
wants = [ "secret-key.service" ];
};
}
```
However I'd leave the issue open until it's discussed whether or not to
keep `keys.target` in `nixpkgs`.
[1] https://nixos.org/nixops/manual/#idm140737322342384
This introduces the following options under the services.gnome3 namespace:
* core-os-services.enable
* core-shell.enable
* core-utilities.enable
* games.enable
The first three are all default enabled by gnome3.enable
and their purpose is to make gnome3 more flexable for users
usecases. In the case of core-utilities and games, it allows
users to easily switch on the default gnome3 applications
and games packages. Previously we had lists in gnome-3/default.nix
but they weren't visible to the user. By having options we have
generated documentation and an interface.
For some reason nm-applet has to be running for an authentication
dialog to be spawned by wingpanel-indicator-network.
This also fixes storing NetworkManager secrets in the keyring, but this
is still broken because we lack the proper PAM configuration.
When NetworkManager is configured to not manage all interfaces, it's
perfectly fine to have the rest be managed by the standard nixos
wireless scripts.
I use
networking.networkmanager.unmanaged = [
"*" "except:type:wwan" "except:type:gsm"
];
to control everything using networking.wireless except for the mobile
LTE modem which only works with NetworkManager.
Fix the following error when opening Background panel in GNOME Settings:
URI '/nix/store/…-simple-dark-gray-2016-02-19/share/artwork/gnome/nix-wallpaper-simple-dark-gray.png' is invalid
This module obsoletes services.gnome3.gnome-terminal-server
as that's a confusing option for users, and sounds internal.
It's much simpler to have a gnome-terminal module.
* nginx: expose generated config and allow nginx reloads
Fixes: https://github.com/NixOS/nixpkgs/issues/15906
Another try was done, but not yet merged in https://github.com/NixOS/nixpkgs/pull/24476
This add 2 new features: ability to review generated Nginx config
(and NixOS has sophisticated generation!) and reloading
of nginx on config changes. This preserves nginx restart on package
updates.
I've modified nginx test to use this new feature and check reload/restart
behavior.
* rename to enableReload
* add sleep(1) in ETag test (race condition) and rewrite rebuild-switch using `nesting.clone`
* Regenerated all patches for 1.4.2 and resolved
any conflicts.
* fix-test-paths.patch doesn't copy the whole locale archive
because we have C.UTF8 now.
* nixos/flatpak creates a Flatpak system helper user
Change introduced in 1.3.2.
Changes:
See https://github.com/flatpak/flatpak/releases/tag/1.3.1 through
1.4.2.
This allows xkbvalidate to be compiled via Clang and also has a few
other portability improvements, eg. it now can even be compiled on OS X,
even though it's probably not needed there.
In addition, I changed the binary name so that it matches the package
name.
I'm merging this in right now, because there is only the xserver NixOS
module where this is used, so the risk of a catastrophic breakage is
very low.
Checks and build done by ofborg also ran successfully and I also did a
few local tests (eg. running via valgrind to avoid leaks) to make sure
it's still working properly.
So far, the output binary has been just "validate", which is quite a
very generic name and doesn't match the package name.
Even though I highly doubt that this program will ever be used outside
of NixOS modules, it's nevertheless less confusing to have a consistent
naming.
Signed-off-by: aszlig <aszlig@nix.build>
The old `cp` suffers from a permission issue on the 2nd start of the
service. The files were copied from the read-only nix store. On the 2nd
start of the service the `cp` failed.
The new version force creates a symlink which does not suffer from this.
Prometheus2 does no longer support the command-line flag to specify
an alertmanager. Instead it now supports both service discovery and
configuration of alertmanagers in the alerting config section.
Simply mapping the previous option to an entry in the new alertmanagers
section is not enough to allow for complete configurations of an
alertmanager.
Therefore the option alertmanagerURL is no longer used and instead
a full alertmanager configuration is expected.
