180 lines
9.5 KiB
Plaintext
180 lines
9.5 KiB
Plaintext
|
||
By El Observador
|
||
Copyright (C) 1995 by El Observador BBS
|
||
|
||
|
||
BEATING THE PHONE COMPANY
|
||
|
||
|
||
Modifying your UUCP login script to transfer batched news
|
||
via an intermediary provider using "rlogin."
|
||
|
||
I run a medium size BBS out of Monterey, California and as
|
||
of just a short while ago was looking for a way to provide
|
||
Internet connectivity to my users at a reasonable cost.
|
||
Currently, the only provider in my area is Netcom, but when
|
||
I called them to ask if they would provide me with a UUCP
|
||
feed, the answer was an outright NO. The only other option
|
||
I had was to find an inexpensive provider out of San Jose, a
|
||
long distance call from Monterey. The good news is I did
|
||
find a provider in San Jose called a2i Communications which
|
||
offered me both a UUCP feed and an interactive shell account
|
||
for a low monthly fee of twenty dollars. The bad news is
|
||
that in order to carry the number of USENET newsgroups I
|
||
wanted for my BBS (around 200-300) I was going to have to
|
||
pay approximately four hundred dollars in long distance
|
||
phone charges each month! There had to be a better way.
|
||
|
||
The document that follows explains in detail how to
|
||
configure a uucp script to exchange batched mail via the
|
||
unix `rlogin' command. One of the primary reasons for
|
||
exchanging mail in this manner is that it enables you to
|
||
dial a local Internet provider--who may not offer a uucp
|
||
feed--and `rlogin' to a remote provider that *does* offer a
|
||
uucp feed. In this way, you will avoid the often horrendous
|
||
long distance phone charges associated with running an
|
||
Internet/Usenet feed for your BBS.
|
||
|
||
In order to illustrate this process, let us say as an
|
||
example that the only Internet provider in your town with a
|
||
local access number is Netcom (as in my case).
|
||
Unfortunately, Netcom (as previously mentioned) no longer
|
||
offers UUCP feeds, so you are required to establish a feed
|
||
account with another provider outside of your area code or
|
||
local calling area. As you are no doubt well aware, a full
|
||
UUCP feed (over 8,000 newsgroups) brings in about 55
|
||
megabytes of new messages each and every day. Even a small
|
||
selection (100-300 conferences) will often require several
|
||
hours to download each night from the provider. This can
|
||
add up to BIG phone charges each month. But there is a way
|
||
to avoid this and pay nothing in long distance charges.
|
||
|
||
First, you will need to establish a SHELL account with
|
||
Netcom (or other local provider) and then of course a feed
|
||
account with the provider outside your local calling area.
|
||
Now, configure your BBS or network and ensure that your UUCP
|
||
feed is working via the direct dialing of your out-of-town
|
||
provider. Once you have ironed out all of the bugs and
|
||
idiosyncrasies of running a UUCP feed, you are now ready to
|
||
modify your uucp login script which is accessed by the
|
||
program you are using to dial the provider and to initiate
|
||
the transfer. Login scripts vary according to the software
|
||
you are using. The example that follows is a script I wrote
|
||
for PCBoard 15.21's UUXFER program. NOTE: It runs on one
|
||
continuous line; however, I have split it over multiple
|
||
lines so that it formats correctly to the page. In order to
|
||
distinguish clearly the login names and passwords, let's use
|
||
the following examples: for Netcom, we shall use login name
|
||
`sugar' and password `uncle'; for a2i (the uucp feed) we
|
||
shall use password `87jR2.Q'. There is no need to specify
|
||
the login for the feed, as we will do that in the rlogin
|
||
batch we will create and store in your Netcom's home
|
||
directory.
|
||
|
||
------------------------------------------------------------------
|
||
| Original uucp script for direct dialing uucp provider |
|
||
| |
|
||
| #Systems file for a2i, created 5/25/95 by EO. |
|
||
| |
|
||
| a2i f1 f2 f3 f4 g "" ATZ OK \dATDT2939010 CONNECT \c gin:--gin |
|
||
| Uamos word:--word 87jR2.Q |
|
||
| |
|
||
------------------------------------------------------------------
|
||
|
||
------------------------------------------------------------------
|
||
| MODIFIED SCRIPT FOR LOCAL NETCOM NODE |
|
||
| #Systems file for a2i, modified 6/09/95 by EO. |
|
||
| a2i f1 f2 f3 f4 g "" ATZ OK \dATDT6447850 CONNECT \c gin:--gin |
|
||
| sugar word:-word uncle }:--} feed word:--word 87jR2.Q |
|
||
------------------------------------------------------------------
|
||
|
||
Ok, now that we have our script for direct dialing (long
|
||
distance) our provider working, let's study our modified
|
||
`rlogin' script. First, I have changed the dial-up number
|
||
from the long distance provider to the number for the local
|
||
Netcom node. Then I changed the login and password to
|
||
reflect the local Netcom account. Following those changes,
|
||
you will notice the `}' braces. After UUXFER logs into your
|
||
local Netcom account and signs on with the proper password,
|
||
it needs to be told what to look for next. The Netcom
|
||
server you logon to--which varies with each call--is always
|
||
enclosed in braces (check the prompt your local provider
|
||
uses and substitute accordingly) so I have told UUXFER that
|
||
when it sees the braces that it should execute the batch
|
||
file called `feed.' You now will need to call Netcom (or
|
||
local provider) and after logging in, type `pico feed' at
|
||
the main prompt. This will create an empty text file called
|
||
`feed.' At this point we will type out the rlogin command
|
||
along with the parameters we will use for logging into the
|
||
feed site. Substitute the following for your particular
|
||
site:
|
||
|
||
rlogin hustle.rahul.net -l Uamos
|
||
|
||
Now do a ctrl-x to exit and save the file known as `feed.'
|
||
At the Netcom prompt, type `chmod +x feed' and press enter.
|
||
This will make `feed' executable as a batch file. Please
|
||
note that you will need to find out the name of the specific
|
||
server your provider uses for UUCP feeds and substitute it
|
||
for the name I used: hustle.rahul.net. You will also have
|
||
to ask your provider if he will configure his server to
|
||
allow your incoming rlogin (Rahul of a2i Communications was
|
||
very happy to assist me in my efforts and made all of this
|
||
possible). He will need your Netcom login name to do this.
|
||
Also notice the rlogin -l switch followed by the UUCP login
|
||
you use with the feed site. Unfortunately, UUXFER treats
|
||
any switches or other commands as separate commands or
|
||
programs. Because of this, we have to tell our script to
|
||
execute the batch file known as `feed."
|
||
|
||
So, getting back to our script, we see that after UUXFER
|
||
sees the braces, it will run the feed batch file which will
|
||
in turn `rlogin' to the appropriate server with your UUCP
|
||
username. The next thing that will happen is that you will
|
||
be prompted for a password. When UUXFER sees `word' it will
|
||
enter your UUCP password. (Please note that in the modified
|
||
script I have removed the `CONNECT \c' when using rlogin to
|
||
log into the UUCP server. I have done this because we are
|
||
already logged in thanks to our feed batch file and the use
|
||
of the `-l' parameter with rlogin. All we need do now is
|
||
have our script enter the UUCP password).
|
||
|
||
Once our UUXFER script enters the appropriate UUCP password
|
||
(in this case, 87jR2.Q), you should see the following
|
||
message "Shere=sitename." The transfer should begin just as
|
||
it would had you dialed in directly. Please note that the
|
||
throughput will be nearly the same, as the feed server is
|
||
processing the job at the same speed as before. The good
|
||
news is that you're connected to a local number and
|
||
transferring all of your batched news through Netcom!
|
||
Congratulations if everything works. With enough
|
||
persistence and perspicacity, you should be able to adapt
|
||
this script to work with nearly any program or environment.
|
||
|
||
|
||
Addendum:
|
||
In certain instances, the rlogin command may be unreliable.
|
||
The rlogin command traps certain sequences of characters, when it
|
||
sees a dot at the beginning of a line. If this is the case, you
|
||
may want to experiment with BINARY telnet. If your provider does
|
||
not support BINARY telnet, you will need to obtain the source code
|
||
and recompile it on your local provider's system. With any luck your
|
||
UUCP transactions will never include the character sequences trapped
|
||
by rlogin, making this precaution unnecessary.
|
||
|
||
You can increase the throughput of your UUCP transfers by
|
||
modifying the 'g' parameter in PCBoard's uucp chat script. The g
|
||
parameter controls the window and packet size used during the transfer.
|
||
Try changing it to read g65, a setting which works well on my system
|
||
(my transfer rate increased from 600cps to 1600+ cps). Consult your
|
||
PCBoard manual for more detailed information.
|
||
|
||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͻ
|
||
<20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ <20>
|
||
<20> <20> CONTACT ORGANIZED CONFUZION VIA VOICEMAIL <20> <20>
|
||
<20> <20> ----------------------------------------- <20> <20>
|
||
<20> <20> UNITED STATES HEAD QUARTERS 1+212-415-0239 AFTER 22:00 <20> <20>
|
||
<20> <20> <20> <20>
|
||
<20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20>
|
||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ
|