498 lines
23 KiB
Plaintext
498 lines
23 KiB
Plaintext
Programming Your Personal or Portable Cellular Telephone
|
|
|
|
Programming Manual - Most Motorola Transportables
|
|
|
|
68P81155E16-D 6/15/89-RGC CONTENTS
|
|
|
|
Introduction ..................................................3
|
|
Features to be Programmed .....................................3
|
|
Obtaining System Registration Data ............................6
|
|
Programming Your Telephone ....................................6
|
|
Determine the Initial Programming Sequence ...................6
|
|
Initial Steps ............................................... 7
|
|
Programming Procedure ........................................8
|
|
Reviewing of NAM Programming ................................10
|
|
Storing the Information .....................................10
|
|
Programming the Second Telephone Number .....................10
|
|
Before Calling for Service ...................................11
|
|
Personal or Portable Cellular Telephone Battery Chargers .....12
|
|
Personal Telephone Battery Charger ..........................12
|
|
Portable Telephone Battery Charger ..........................12
|
|
Safety Information ..........................................12
|
|
Portable Charger Operation ..................................13
|
|
Portable Charger Maintenance ................................13
|
|
Telephone Number Label Installation Instructions .............13
|
|
NAM Programming Data Table ...................................15
|
|
Rules, Regu1ations, and Precautions ..........................17
|
|
General Safety lnformation ...................................18
|
|
|
|
1. INTRODUCTION
|
|
|
|
Your cellular phone contains a special memory which retains information
|
|
about the phone's individual characteristics, such as its assigned
|
|
telephone number, system identification number, and other information that
|
|
is necessary for cellular operation. This special memory is known as the
|
|
Number Assignment Module (NAM). You can program the phone yourself, if the
|
|
phone has not already been programmed where you purchased it. You can also
|
|
reprogram the phone yourself should you wish to change some of the
|
|
features already selected for the NAM.
|
|
|
|
The programming of the NAM is performed after you have contacted your
|
|
cellular system operator (or operators) for the necessary information as
|
|
described below. Enter the information received from your cellular system
|
|
operator in the NAM Programming Data Table (included in this manual)
|
|
before programming the NAM of your cellular telephone. Follow your system
|
|
operator's instructions regarding each NAM information entry. Incorrect
|
|
NAM entries can cause your cellular telephone to operate improperly or not
|
|
at all.
|
|
|
|
Your cellular telephone can be programmed up to three times. After that,
|
|
it must be reset at a Motorola-authorized service facility.
|
|
|
|
Be sure to read through this entire manual before attempting to program
|
|
your phone.
|
|
|
|
2. FEATURES TO BE PROGRAMMED
|
|
|
|
You must request seven pieces of information from the cellular system
|
|
operator to allow you to program your cellular phone. You provide the
|
|
remaining information. Write all of this programming information on the
|
|
NAM Programming Data Table provided on page 15 of this manual before
|
|
commencing the procedure. Incorrect NAM entries can cause your cellular
|
|
telephone to operate improperly or not at all. The required information is:
|
|
|
|
* System Identification (SID) Code (S-digits)--Indicates your Home
|
|
system. Enter O's into the left-most unused positions. Provided by
|
|
the system operator.
|
|
|
|
* Cellular Telephone Number (10 digits)--Used in the same manner
|
|
as a standard land-line telephone. The mobile phone number and
|
|
the Electronic Serial Number are checked against each other by the
|
|
cellular system each time a call is placed or received. Provided by the
|
|
system operator.
|
|
|
|
* Station Class Code (2 digits)--06 or 14 for most personal or portable
|
|
telephones. Even though your phone has extended bandwidth capability (832
|
|
channel capacity), the cellular system operator may require your station
|
|
class code to remain 06. The code should be 14 if 832 channel operation is
|
|
allowed. (If you have the convertible accessory, and wish it to be
|
|
programmed with a separate phone number for standalone operation, the
|
|
class code mark will be set to 12 for the convertible accessory--with the
|
|
personal telephone disconnected) Provided by the system operator.
|
|
|
|
* Access Overload Class (2 digits)--Provided by the system operator.
|
|
|
|
* Group ID Mark (2-digits)--Provided by the system operator.
|
|
|
|
* Security Code (6-digits)--The six-digit security code allows the user to
|
|
restrict his calls in certain ways and it permits other advanced security
|
|
measures. Refer to your operator's manual for further details. Select any
|
|
6-digit code that you will remember, but one that will not be easily
|
|
compromised.
|
|
|
|
* Unlock Code (3-digits)--The 3-digit unlock code unlocks the telephone
|
|
after it has been locked. Locking the telephone allows you to prevent
|
|
unauthorized usage. With many models, this number can be programmed as
|
|
often as desired. Consult your user manual. Select any convenient 3-digit
|
|
number.
|
|
|
|
* Initial Paging Channel (4 digits)--Use a leading zero if required.
|
|
(Example: Channel 334 is entered as 0334.) Provided by the system
|
|
operator.
|
|
|
|
* Option Bits (6 digits)--This programming step allows you to program six
|
|
separate features in one step. Each feature is either selected or
|
|
cancelled by assigning a value of 1 or 0. The six individual single-digit
|
|
features combine to form a six-digit code which is entered as one step. If
|
|
any of the features is to be changed, the entire six-bit word must be
|
|
reentered.
|
|
|
|
--Internal Speaker-- This feature is normally selected by programming 0.
|
|
However, if you purchased the Convertible Accessory and it contains a
|
|
separate External Speaker/VSP unit, cancel the internal speaker feature by
|
|
programming 1.
|
|
|
|
--Local Use--This feature is normally selected by programming 1.
|
|
Your system operator can tell you if you need to cancel this feature
|
|
by programming 0.
|
|
|
|
--MIN Mark--This feature is normally not used and is assigned a
|
|
value of 0. Your system operator can tell you if you need to select
|
|
this feature. To select, program 1.
|
|
|
|
--Auto Recall--This feature is always set at 1.
|
|
|
|
--Second Phone Number--This feature is normally not used and is
|
|
assigned a value of 0. However, if you have arranged with a cellular
|
|
system operator to have a second phone number, select this feature by
|
|
programming 1.
|
|
|
|
--Diversity--This feature is always set at O for the portable/personal
|
|
telephone used alone. (If you have a convertible accessory, and it has two
|
|
external antennas, select this feature by programming 1.)
|
|
|
|
* Option Bits (3 digits)--This programming step allows you to program an
|
|
additional three separate features in one step. Each feature is either
|
|
selected or cancelled with the digit 1 or 0. The three individual
|
|
single-digit features combine to form a three-digit code which is entered
|
|
as one step. If any of the features is to be changed, the entire three-bit
|
|
word must be reentered.
|
|
|
|
--Long Tone DTMF--Certain electronic devices, such as answering machines,
|
|
are not able to decode the normal DTMF tones because the telephone system
|
|
standard duration is too short. The Long Tone DTMF feature allows access
|
|
to answering machines and other similar devices by transmitting the DTMF
|
|
tone for as long as the key is depressed. This feature is normally not
|
|
used and is assigned a value of 0. However, you can select Long Tone DTMF
|
|
by programmlng 1.
|
|
|
|
NOTE
|
|
|
|
Personal or portable models with a MENU key can more flexibly select and
|
|
cancel this feature through the Menu. However to allow Menu control of the
|
|
function it must be cancelled in the NAM by setting this bit to 0. If
|
|
Long Tone DTMF is selected in the NAM with a 1 in this bit, it cannot be
|
|
reversed throughh the Menu.
|
|
|
|
--Future Use--This feature is always set at 0.
|
|
|
|
--Eight-Hour Timeout (Convertible only)--Personal or portable telephones
|
|
with the convertible accessory can normally be left active in the vehicle
|
|
for eight hours with the ignition off. If the timeout feature is selected,
|
|
the telephone will turn itself off after eight hours to preserve the
|
|
vehicle's battery. This feature is normally selected by programming 0.
|
|
However, you can cancel this eight-hour time limit by programming 1.
|
|
|
|
3. OBTAINING SYSTEM REGISTRATION DATA
|
|
|
|
A cellular phone owner purchases service from a cellular system operator,
|
|
just as he would purchase land-line service (for standard telephones) from
|
|
the local telephone company. In cities with cellular coverage, the
|
|
customer may have the option of picking one oE two possible cellular
|
|
system operators.
|
|
|
|
Before you can obtain a phone number, you will have to supply your
|
|
cellular system operator with your electronic serial number.AII cellular
|
|
telephones contain a special Electronic Serial Number (ESN). The ESN
|
|
uniquely identifies your phone and provides a measure of protection
|
|
against theft and fraud. The ESN is an eight-character (numeric/
|
|
hexadecimal) number printed on the box your phone came in.
|
|
|
|
Once you supply your electronic serial number to the system operator, he
|
|
will issue your phone number and supply the other information required to
|
|
program the NAM. You should immediately enter this information on the NAM
|
|
Programming Data Table on page 15 of this manual.
|
|
|
|
4. PROGRAMMING YOUR TELEPHONE
|
|
|
|
4.1 Determining the Initial Programming Sequence
|
|
|
|
The initial programming steps include a sequence of keypresses which vary
|
|
depending on the type of cellular telephone you have. The telephone NAM
|
|
can be programmed from the personal or portable telephone keypad.
|
|
Determine from Table 1 which of the six keystroke sequence numbers to use
|
|
on your phone, based on the type of keys present on the keypad.
|
|
|
|
Table 1
|
|
|
|
Determining the Sequence Number with Personal/Portable Keypad
|
|
|
|
Keys on Personal or Portable Keypad Sequence
|
|
|
|
MENU and FCN keys 6
|
|
FCN key but no MENU key 1
|
|
No Fcn key 2
|
|
|
|
If you have the convertible accessory, the telephone NAM must be
|
|
programmed from the convertible handset. (Makesurethatthepersonaltelephone
|
|
is disconnected from the convertible accessory before programming the
|
|
convertible.)The handset type can be read from the label on the back of
|
|
the handset. The keystroke sequence number is determined from Table 2. If
|
|
you have the convertible accessory, and wish to use it separately as a
|
|
standalone mobile, you may obtain an additional telephone number and
|
|
program this into the convertible accessory at this time.
|
|
|
|
Table 2
|
|
|
|
Determining the Sequence Number with Convertible Handset
|
|
|
|
Model Handset Type Sequence
|
|
|
|
3000 SCN2007A 6
|
|
6000 SCN2023A 2
|
|
6000X SLN2020A 1
|
|
6000XL TLN2659A 1
|
|
6800XL TLN2733A 6
|
|
|
|
|
|
Chose one of the six initial programming sequences from Table 3 depending
|
|
on the sequence number which you determined from Table 1 or 2.
|
|
|
|
Table 3
|
|
|
|
Initial Programming Sequence
|
|
|
|
Sequence
|
|
Number Sequence
|
|
|
|
1 FCN, Security Code entered twice, RCL
|
|
2 STO, #, Security Code entered twice, RCL
|
|
3 Ctl, O + Security Code entered twice, RCL
|
|
4 Ctl, O + Security Code entered twice, *
|
|
5 FCN, O + Security Code entered twice, MEM
|
|
6 FCN, O + Security Code entered twice, RCL
|
|
|
|
Security code is programmed 000000 at the factory.
|
|
|
|
|
|
4.2 Initial Steps
|
|
|
|
Before you proceed with the programming procedure, be sure you have filled
|
|
out the NAM Programming Data Table on page 15.
|
|
|
|
Step a. Turn on your cellular telephone by pressing the Pwr or On/Off
|
|
button. The power indicator in the display will flash.
|
|
|
|
Step b. Enter the proper keystroke sequence determined from Table 3.
|
|
|
|
Step c. The message 01 will appear in the display to confirm the
|
|
activation of the NAM programming feature. It also indicates that you are
|
|
at the first step in the NAM programming sequence. If this message does
|
|
not appear, it may be due to one of the following:
|
|
|
|
* The initial sequence may not have been entered quickly enough. The
|
|
appearance of zeros in the display will indicate this. Press Clr and try
|
|
again.
|
|
|
|
* The six digit Security Code may have previously been programmed
|
|
into your cellular telephone. If this is the case, you must re-enter the
|
|
activation sequence using the assigned security code.
|
|
|
|
* The maximum number of times that your cellular phone can be reprogrammed
|
|
from the keypad may have been reached. Contact the personnel where you
|
|
obtained your cellular telephone if reprogramming is required.
|
|
|
|
* The ability for your cellular phone to be programmed from the keypad may
|
|
have been disabled or cancelled. Contact the personnel where you obtained
|
|
your cellular telephone if reprogramming is required.
|
|
|
|
4.3 Programming Procedure
|
|
|
|
Programming for a single phone number can be as quick as a four-step
|
|
process or may take up to 11 steps, depending on how many programable
|
|
features you wish to review or change. The phone always has some
|
|
information programmed for each of the features, whether that information
|
|
is standard programming performed at the factory or information provided
|
|
by someone who programmed the unit previously. If, while you are
|
|
programming, you are satisfied with the value already programmed for a
|
|
particular feature, simply press * to move to the next feature.
|
|
|
|
At any time that a two-digit step number (01-11) appears in the display,
|
|
you may store all the information programmed in the phone by pressing
|
|
SND to return to normal phone operation.
|
|
|
|
In order to perform the following steps, it is necessary for you to refer
|
|
to the completed NAM Programming Data Table. If you enter a digit
|
|
incorrectly, press the Clr button and start again.
|
|
|
|
Enter/Press
|
|
Step on the Keypad Display Comment
|
|
|
|
01 Ready for step 1
|
|
la * Current System I.D. Factory Setting 000000
|
|
lb New system ID xxxxxxx New system ID
|
|
lc * 02 Ready for step 2
|
|
|
|
2a * Current area code Factory setting 111
|
|
2b New area code xxx New area code
|
|
2c * 03 Ready for step 3
|
|
|
|
3a * Current phone Factory setting 1110111
|
|
number
|
|
3b New phone xxxxxx New phone number
|
|
number
|
|
3c * 04 Ready for step 4
|
|
|
|
4a * Current station Factory setting 06 or 14
|
|
class mark. for portable/personal,12
|
|
for standalone mobile.
|
|
4b New station xx New station class mark
|
|
class mark
|
|
4c * 05 Ready for step 5
|
|
|
|
5a * Current access
|
|
overload class
|
|
5b New access xx New access overload
|
|
overload class class
|
|
5c * 06 Ready for step 6
|
|
|
|
6a * Current Group ID Factory Setting 00
|
|
6b New group ID xx New group ID
|
|
6c * 07 Ready for step 7
|
|
|
|
7a * Current security code Factory setting 000000
|
|
7b New security xxxxxx New security code
|
|
code
|
|
7c * 08 Ready for step 8
|
|
|
|
8a * Current unlock code Factory setting 123
|
|
8b New unlock xxx New unlock code
|
|
code
|
|
8c * 09 Ready for step 9
|
|
|
|
9a * Current initial Factory setting 0334
|
|
paging channel
|
|
9b New initial xxxxxx New initial paging
|
|
paging channel channel
|
|
9c * 10 Ready for step 10
|
|
|
|
10a * Current options Factory setting 010100
|
|
10b New options xxxxxx New options
|
|
10c * 11 Ready for step 11
|
|
|
|
lla * Current options Factory setting 000
|
|
llb New options xxx New options
|
|
llc * 01 or 01 2 Ready for review or
|
|
programming second
|
|
phone number
|
|
|
|
4.4 Reviewing of NAM Programming
|
|
|
|
Once you have completed the programming steps, review the information by
|
|
repeatedly pressing *. Check to make sure that the information programmed
|
|
matches what you wrote in the NAM Programming Table. Make any required
|
|
changes.
|
|
|
|
4.5 Storing the Information
|
|
|
|
If you are programming a single phone number, press SND to store the
|
|
programming information when you are satisfied that it is all correct. A
|
|
two-digit step number (01-11) must appear in the display in order for you
|
|
to store the data. Press * until one appears and then press SND.
|
|
|
|
Your personal or portable cellular telephone is now ready for normal use,
|
|
if you are programming a single phone number.
|
|
|
|
4.6 Programming the Second Telephone Number
|
|
|
|
If 01 2 appears in the display after you have pressed SND to store the
|
|
programming information for the first phone number, you are ready to
|
|
repeat some or all of the ten steps, this time for a second phone number.
|
|
The 01 indicates that you are ready to enter the System ID information
|
|
(step l) and the 2 indicates that you are programming information for the
|
|
second telephone number. The phone assigns the same security and lock
|
|
codes (steps 7 and 8) for the second phone number and as so skips from
|
|
step 6 to step 9. There is no step 11 when programming a second phone
|
|
number.
|
|
|
|
If 01 2 did not appear after programming the first phone number, and you
|
|
wish to program a second number, either the second telephone option has
|
|
not been selected (step 10) or your phone is not equipped for dual system
|
|
operation.
|
|
|
|
Once you have completed the programming steps, review the information by
|
|
repeatedly pressing *. Check to make sure that the information programmed
|
|
matches what you wrote in the NAM Programming Table. Make any required
|
|
changes. Press SND to store the programming information when you are
|
|
satisfied that it is all correct. (A two-digit step number (01-10) must
|
|
appear in the display.)
|
|
|
|
Your personal or portable cellular telephone is now ready for normal use.
|
|
|
|
5. BEFORE CALLING FOR SERVICE
|
|
|
|
If you experience operating difficulties, check the following before making
|
|
a call for service.
|
|
|
|
* Have you read your User's Manual ?
|
|
|
|
Everything you need to know to operate your cellular telephone is in your
|
|
User's Manual. Take the time to read it and become familiar with all the
|
|
features of your telephone before calling for service. Note that not all
|
|
of the features discussed below are included in all telephone models.
|
|
|
|
* If your telephone is equipped with Vehicular Speaker Phone (V.S.P.), do
|
|
you hear excessive feedback noise during a V.S.P. call ?
|
|
|
|
Because of audio variations in the cellular system, excessive feedback
|
|
noise or howling may sometimes be heard when a full duplex (if your
|
|
telephone is so equipped) V.S.P. call is placed or received. If this
|
|
occurs, decrease the speaker volume using the volume control of the side
|
|
of the handset. Motorola's full duplex Vehicular Speaker Phone is
|
|
designated V.S.P. 11.
|
|
|
|
* Have you unlocked your unit ?
|
|
|
|
Your cellular telephone is inoperative when locked as indicated by
|
|
the word Locked in the display. To unlock the telephone, enter your
|
|
3-digit lock code. The word Locked will disappear.
|
|
|
|
* Is the red NS (No Service) indicator lighted ?
|
|
|
|
This may indicate that you are outside the service area or in a marginal
|
|
reception area. Marginal reception may also be indicated by a fast busy or
|
|
alternating high-low sound when attempting to place a call.
|
|
|
|
* Have you programmed a unique operating mode into the unit ? Constant
|
|
flashing of the yellow Roam or Rm indicator or illumination of the red No
|
|
Svc or NS (no service) indicator while in your home service area may
|
|
indicate an undesired roam characteristic choice has been selected. See
|
|
"Roaming and System Operation" in your User's Manual.
|
|
|
|
NAM PROGRAMMING DATA TABLE
|
|
|
|
Step number Description No. of digits Source
|
|
|
|
01 System ID Numbcr 5 Digits System Operator
|
|
02 Cellular Area Code 3 Digits System Operator
|
|
03 Cellular Phone Number 7 Digits System Operator
|
|
04 Station Class Mark 2 Digits System Operator
|
|
|
|
(Usually 14 for 832 channels 12 for Standalone mobile)
|
|
|
|
05 Access Overload Class 2 Digits System Operator
|
|
06 Group ID Mark 2 Digits System Operator
|
|
07 6-Digit Security Code 6 Digits Telephone Owner
|
|
08 3-Digit it Unlock Code 3 Digits Telephone Owner
|
|
09 Initial Paging Channel 4 Digits System Operator
|
|
|
|
(Usually 0333 or 0334)
|
|
10 Option Programming 6 Digits
|
|
/--------- Handset Internal 1 Digit Telephone owner
|
|
| Speaker disable
|
|
| If your installation contains a separate External Speaker/VSP unit
|
|
| The handset internal speaker must be disabled.
|
|
| 1 = disabled, 0 = enabled. This bit normally enabled.
|
|
|/-------- Local Use 1 Digit System Operator
|
|
|| ( Normally enabled 1 = Enabled 0 = Disabled )
|
|
||/------- MIN Mark 1 Digit System Operator
|
|
||| ( Normally disabled 1 = Enabled 0 = Disabled )
|
|
|||/------ Auto Recall 1 Digit Always 1
|
|
||||
|
|
||||/----- 2nd Phone No 1 Digit Telephone Owner
|
|
||||| ( Normally disabled 1 = Enabled 0 = Disabled )
|
|
|||||
|
|
|||||/---- Diversity 1 Digit Telephone Owner
|
|
|||||| (based on the number of antenna ports with which your cellular
|
|
|||||| phone is equipped O = Standard 1 antenna;
|
|
|||||| 1 = optional two antennas
|
|
______ Optional programming data entry
|
|
|
|
11 Option Programming 3 Digits
|
|
(Cont d)
|
|
|
|
/--------- Long Tone DTMF 1 Digit Telephone Owner
|
|
| ( Normally disabled 1 = Enabled 0 = Disabled )
|
|
|/-------- For Future Use 1 Digit Always O
|
|
||
|
|
||/------- Eight-hour Timeout 1 Digit Telephone Owner
|
|
||| ( Normally enabled I = Disabled O = Enabled )
|
|
|||
|
|
___ Optional Programming Data Entry
|
|
|
|
Step number - This number is the message that appears in the display during
|
|
programming
|
|
|
|
|
|
Downloaded From P-80 International Information Systems 304-744-2253
|