75 lines
4.6 KiB
Plaintext
75 lines
4.6 KiB
Plaintext
THIS PUBLICATION IS FOR INFORMATIONAL PURPOSES ONLY. NEITHER I, THE PEOPLE
|
||
WHO DISTRIBUTE THIS FILE, NOR THE ORGANANIZATIONS THROUGH WHICH IT IS
|
||
DISTRIBUTED ARE LIABLE FROM ANY DAMAGE, LEGAL ACTION, OR ANYTHING ELSE
|
||
AS A RESULT OF THE USE OR MISUSE OF THIS FILE.
|
||
******************************************************************************
|
||
Well, I guess that covers everything. I am serious about not being liable for
|
||
damages, too. You could screw a lot of things up with this stuff, so I sure as
|
||
hell hope you have enough intelligence to bullshit your way out of sticky
|
||
situations. But the best advice is don't get caught. This is primarily meant
|
||
for information on possible ways crooks can tap your line(or the government,
|
||
same thing!!), but if you use these techniques personally, I suggest having
|
||
escapes...
|
||
Anyway, I guess I'll start with hot-mics. At least that's what I heard
|
||
they're called. They are made up of a few cheap components, and very easy to
|
||
make, requiring little skill(Hell, I can do it!). There are many types, but I
|
||
will just cover the primary ones:
|
||
|
||
With a Resister only:
|
||
Well this is by far the simplest method of bugging any phone. The basic
|
||
principle is that by placing a resister over the hookswitch, enough power will
|
||
be let through to power the microphone in the phone, but not enough to make the
|
||
phone go "off-hook" The best way to do this is probably with a 10k ohm
|
||
resister, which are availible in 2-packs at radio shack for about 69›. Simply
|
||
attach the resister to each side of one of the hookswitches(I suggest soldering)
|
||
and you can pick up the signal at another point on the line via a mini-amp
|
||
(will be explained later). You can also try using different strength resisters,
|
||
the less powerful the resister, the stronger the sound. You will be able to hear
|
||
room noise with this one.
|
||
|
||
With a resister and a capacitor:
|
||
Use a 10k ohm resister, and a .47 uf, or 1 uf capacitor. Place these in
|
||
parallel across a hookswitch as in above. The capacitor should have a rating of
|
||
200 volts or more. The capacitor is also availible in radio shack, a pack of 2
|
||
being less than a dollar. room audio comes in stronger with this one.
|
||
|
||
Picking up the line:
|
||
Okay, well to tell the truth, I haven't gotten either of the above scams
|
||
to work, but this one is easy and surely works. The above things may or may not
|
||
work, but they probably DO, so you should probably try them. I probably have
|
||
trouble because I've only done the first one, which is less powerful than the
|
||
second. So now, let's get down to this listening business. All you need is a
|
||
mini-amp, availible at, yes, radio shack, for about 11.95. I can'tgive you the
|
||
exact cat. number, but it is a little beige thing, usually on display somewhere
|
||
You will also need a .022 uf capacitor, a small length of phone cord, and either
|
||
a mono female to male adapter, or a mono cord with one male end. They can be
|
||
stereo too, but the amplifier is only mono. they can also be either 1/8" or 1/4"
|
||
but the input on the mini amp is 1/8", so get an adapter if you get a 1/4"...
|
||
alright, now to connect the phone line to the amp, cut off one end of the phone
|
||
line, and strip the red and green wires inside(there should also be a black wire
|
||
and a yellow wire). Connect the capacitor to the red wire and one of the
|
||
contacts on the adapter or cable(you should strip the cable, or remove the cover
|
||
to the adapter, dur!) Connect the green wire to the other contact on the adapter
|
||
I soldered them and ti works great, but you don't have to. Now, obviously, you
|
||
need to plug the adapter into the mini amp, and the phone line into a jack. You
|
||
should now be able to listen in on any phone conversations, and if you have one
|
||
of the above hot-mics installed, you should be able to hear room conversations.
|
||
|
||
I hope this file helps you to find any bugs, or to build anything you
|
||
might need. Have phun!!!
|
||
|
||
|
||
|
||
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|
||
Another file downloaded from: NIRVANAnet(tm)
|
||
|
||
& the Temple of the Screaming Electron Jeff Hunter 510-935-5845
|
||
Burn This Flag Zardoz 408-363-9766
|
||
realitycheck Poindexter Fortran 510-527-1662
|
||
My Dog Bit Jesus Suzanne d'Fault 510-658-8078
|
||
New Dork Sublime Demented Pimiento 415-864-DORK
|
||
The Shrine Tom Joseph 408-747-0778
|
||
|
||
"Raw Data for Raw Nerves"
|
||
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|