50 lines
2.3 KiB
Plaintext
50 lines
2.3 KiB
Plaintext
-//-> The Citronic Cellular Suite :: NEC P3 Reprogramming <-\\-
|
|
|
|
In this package you will find the reprogramming software imaginatively
|
|
titled 'P3.EXE'. This text file shows a diagram of the programming cable.
|
|
|
|
|
|
.+[You will need]+.
|
|
|
|
2 x 1N4148 Diodes
|
|
25-pin D-Plug
|
|
Plug for P3's socket
|
|
|
|
To get the plug for the phones 'up-the-bum' socket you will need to buy
|
|
the car saver. Simply cut the cigaretter lighter end off the cable and
|
|
keep the rest.
|
|
|
|
From the cigarette lighter end find the wires that correspond to the
|
|
correct pins on the P3 plug as per the diagram below and solder on to
|
|
the relevant pins of the D-plug. Don't forget to solder the diodes on
|
|
the right way round. I would recommend putting a decent case around the
|
|
D-25 plug as they can undergo a good deal of stress with continuous use.
|
|
|
|
|
|
25 Pin D-plug LPT1 Plug on end of curly cord
|
|
__________________ _________________________
|
|
|
|
Pin 25.--------------------black--------------------------------------|
|
|
Pin 15.--------------------red-------------------------------------| |
|
|
Pin 6.---|<In4148--| | |
|
|
Pin 13.-------------|------white--------------------------------| | |
|
|
|| [] [] [] [] [] []
|
|
view into plug: Aerial---><>
|
|
Pin 3.---|<1N4148---| || [] [] [] [] [] []
|
|
Pin 12.--------------|-----brown--------------------------------|
|
|
|
|
NOTE Diode protocol: Kathode---|<diode---Anode
|
|
|
|
|
|
Once that is done, simply connect up the cable and fire up the software!
|
|
Enter the ESN you wish to program the phone with. Next you must enter the
|
|
phone number. (Note: You need to use the normal 0850 etc. prefixes not in
|
|
2342 format). The software currently does not accept the new 0585 Cellnet
|
|
prefixed numbers. However it will accept 0374 numbers. If you do need to
|
|
program one with an 0585 number, just enter a valid number, and change it
|
|
with the handset by entering test mode. Lastly you can choose a 4-digit
|
|
unlock code and then you are ready to program. Enter 'Y' at the "Reset and
|
|
Initialise" prompt and your phone will be programmed up for you ready to go.
|
|
|
|
::Pulse/Citronic::
|