146 lines
3.2 KiB
Plaintext
146 lines
3.2 KiB
Plaintext
from drwho@l0pht.com
|
|
FOR AUTHORIZED DEALER USE ONLY
|
|
|
|
|
|
|
|
NOKIA 101/1000/N201/211/191 CELLULAR HANDPORTABLE TELEPHONE
|
|
|
|
NAM PROGRAMMING INSTRUCTIONS
|
|
|
|
|
|
|
|
The Nokia 101 series handportable CMT uses an EEPROM NAM that can be programmed
|
|
|
|
directly from the standaard user keypad. In order to access the NAM, you must
|
|
|
|
enter the special access code currently programmed into the phone. This
|
|
|
|
code can be changed and therefore may vary from phone to phone. Once the
|
|
|
|
programming mode is accessed, NAM parameters are loaded by entering them into
|
|
|
|
the display and "storing" them in selected memory locations. Be sure to
|
|
|
|
obtain all parameters before proceeding.
|
|
|
|
|
|
|
|
ACCESS NAM PROGRAMMING MODE:
|
|
|
|
1. Turn the phone on.
|
|
|
|
2. Enter the NAM access code. Factory default is: * 3 0 0 1 # 1 2 3 4 5
|
|
|
|
3. Enter [STO] 00.
|
|
|
|
4. Verify that "STORE NOT DONE" appears in the display. If "NOT ALLOWED"
|
|
|
|
appears, check to see if you have entered the access code correctly.
|
|
|
|
|
|
|
|
Note: If the correct access code is unknown, reprogramming must be
|
|
|
|
referred back to the wholesale purchaser of the phone.
|
|
|
|
|
|
|
|
ENTER SPECIAL NAM PARAMETERS (Memory Location 01):
|
|
|
|
5. Press and hold the [CLR] key until the display clears.
|
|
|
|
6. In one long string, enter the special NAM parameters according to the
|
|
|
|
format of Example 1 below. Enter each emergency number (such as 911
|
|
|
|
or *911) followed by the pound (#) key, the Language Code followed by
|
|
|
|
the asterisk (*) key, and the desired four digit lock code.
|
|
|
|
Language code: 0 = English, 1 = French, 2 = Spanish.
|
|
|
|
|
|
|
|
EXAMPLE 1: 9 1 1 # * 9 1 1 # 0 * 1 2 3 4
|
|
|
|
|
|
|
|
7. Enter [STO] 01 [STO].
|
|
|
|
|
|
|
|
ENTER MOBILE PHONE NUMBER (Memory Location 02 or 04):
|
|
|
|
8. Press and hold the [CLR] key until the display clears.
|
|
|
|
9. Enter the correct 10 digit phone number.
|
|
|
|
10. If desired, press the [ALPHA] key and enter a name of up to 16
|
|
|
|
characters. Note that the zero (0) key can be used to insert a blank
|
|
|
|
space. After the name is entered, press [ALPHA].
|
|
|
|
11. (For Primary NAM) Enter [STO] 02 [STO].
|
|
|
|
(For Optional NAM) Enter [STO] 04 [STO].
|
|
|
|
|
|
|
|
ENTER SYSTEM PARAMETERS (Memory Location 03 or 05):
|
|
|
|
12. Press and hold the [CLR] key until the display clears.
|
|
|
|
13. In one long string, enter the system parameters according to the
|
|
|
|
format of Example 2 below. Be sure to separate each parameter with an
|
|
|
|
asterisk (*). Do not place and asterisk before or after the string.
|
|
|
|
|
|
|
|
Initial Paging Channel_________
|
|
|
|
\
|
|
|
|
System ID ______ \ ___Access Overload Class
|
|
|
|
\ / \ /
|
|
|
|
/\ / \ / \
|
|
|
|
EXAMPLE 2: 3 4 * 1 * 1 * 3 3 4 * 1 5 * 1 5
|
|
|
|
/ \ \/
|
|
|
|
Access Method Local Use Mark \__Group ID Mark
|
|
|
|
|
|
|
|
14. (For Primary NAM) Enter [STO] 03 [STO].
|
|
|
|
(For Optional NAM) Enter [STO] 04 [STO].
|
|
|
|
|
|
|
|
VERIFY NAM INFORMATION:
|
|
|
|
15. Press and hold the [CLR] key until the display clears.
|
|
|
|
16. Enter [RCL] followed by one of the memory locations from above
|
|
|
|
(01 through 05).
|
|
|
|
17. Verify that the information for that memory location is correct.
|
|
|
|
18. To exit the programming mode, power the phone off then back on. If
|
|
|
|
"NAM ERROR" or NO SVC appears on the display, programming was done
|
|
|
|
incorrectly and must be repeated.
|
|
|
|
|
|
|
|
-END
|
|
.
|