89 lines
3.8 KiB
Plaintext
89 lines
3.8 KiB
Plaintext
|
|
*^**^**^**^**^**^**^**^**^**^*
|
|
* Motorola Cellular Software *
|
|
* Instructions for Versions *
|
|
* #1 and 2 *
|
|
* Written By Task Man *
|
|
* of the HIGH TECH HOODS *
|
|
******************************
|
|
|
|
Ok well, I guess you have the Motorola Software that's why your reading this.
|
|
Now let me stress to you this is for Versions 1 & 2.
|
|
|
|
**Check which version you are using! Version #1 Software WILL NOT change
|
|
phones with software versions higher than 9122!!
|
|
|
|
**Version #2 (HTH-V2.EXE) will do ALL the New Phones with software later than
|
|
9122.
|
|
|
|
So don't fuck up and hook up a new phone to the old software!!
|
|
|
|
Now if you need the Hook Up instructions for the phones you should be able to
|
|
get it the same place you got DownLoaded this file OR you can get it from
|
|
The New York Hack Exchange BBS (718) 379-4702. The New York Hack Exchange is
|
|
the only BBS that will get the Software & Updates before any other BBS.
|
|
|
|
Following the directions, attach the phone to the cables. Make sure the phone
|
|
is powered off, because the software will turn it on and begin reading the
|
|
programed information.
|
|
Once the phone is attached to the programming cables, and there is adequate
|
|
power source (remember, don't turn the phone on) hit "ENTER" on your keyboard
|
|
Now you'll get another box that will ask you the type of phone that you are
|
|
programming.
|
|
|
|
If you are programming a Motorola "FLIP" also known as the 550 line, of a
|
|
Micro Tac portable, select "M"
|
|
|
|
If you are programming an 8000 series, also known as the "Brick","Classic"
|
|
or "Ultra Classic" then select "H"
|
|
|
|
If you are programming any installed , bag or transportable Motorola phone
|
|
then select "C"
|
|
|
|
If you have established a successful connection, then the screen will let
|
|
you know, and then using the tab key and arrow keys, you may select certain
|
|
fields for editing. The most important fields are obviously the ESN and the
|
|
MIN fields, with the "AID" used for the Home System I.D.
|
|
|
|
Now you can type over the information you want changed, but remember to
|
|
copy the original info. somewhere just in case you have to restore the phone
|
|
back.
|
|
|
|
The AOIC is usually the last number of your phone number, preceded by a
|
|
Zero.
|
|
|
|
If you don't become connected, the screen will tell you. Check your cables,
|
|
your power source, and possibly your printer port.
|
|
|
|
The following computers have trouble running the software:
|
|
I.B.M.'s (The real ones not the clones)
|
|
Compaq
|
|
and 486's with over 25Mhz clock speed.
|
|
Certain ports do not have the correct output, so if you are sure that your
|
|
wiring is correct, move the software to another computer and try again.
|
|
|
|
After the phone is successfully programmed the menu will say disconnect
|
|
phone. Now you are ready to use your phone!!
|
|
|
|
Remember, voltage is critical in programming phones. The cable MUST be built
|
|
exactly as diagrammed, and the voltage supplied must be within the specified
|
|
tolerance.
|
|
|
|
NEVER REMOVE THE PHONE WHEN IT IS CALCULATING CHECK SUMS, OR BEING READ. THIS
|
|
MAY PERMANENTLY DAMAGE THE PHONE BEYOND REPAIR.
|
|
|
|
If you have any problems at all just leave me E-MAIL on:
|
|
THE NEW YORK HACK EXCHANGE BBS (718) 379-4702 in the States
|
|
OR THE HACK FACTORY +44PRIVATE in the U.K.
|
|
|
|
Greets go to The RAVEN, V2 will work I did the Mods. myself! Even though it
|
|
still has the 1991 file date!!
|
|
Greets to Video Vindacator, I love your Mitsubishi File! I'll drop you a line
|
|
soon. Leave me your Internet address on the Hack Exchange. P.S. where's
|
|
Ersokose!?!
|
|
LOOK FOR MORE CELLULAR SHIT FROM H.T.H.!!
|
|
|
|
THE PUNISHER *HTH-UK*
|
|
|
|
|