77 lines
3.1 KiB
Plaintext
77 lines
3.1 KiB
Plaintext
DIAMONTEL MESA 90X, 99X, 200
|
||
|
||
NOTES: These are dual NAM units.
|
||
The ESN prefix is 134 decimal, 86 hex.
|
||
See file MITSTEST.TXT for test mode access.
|
||
|
||
NAM programing:
|
||
|
||
1. Press PWR key for one second to turn on phone.
|
||
|
||
2. Wait for wake up cycle to end and display to clear.
|
||
|
||
3. Within ten seconds press and hold the END key while entering
|
||
6 9 7 2 8 1 4 (reset code).
|
||
|
||
4. Release END.
|
||
|
||
5. The phone will display the first data entry.
|
||
|
||
6. Press the SEND key to store information and increment the step number.
|
||
|
||
7. Press CLR to correct any item.
|
||
|
||
8. Press END to complete programing and exit.
|
||
|
||
PROGRAMING DATA:
|
||
|
||
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
|
||
|
||
01 0 OR 1 DUAL NO 0=1 NAM, 1=2 NAMS
|
||
02 10 DIGITS NO1 NAM 1 MIN (AREA CODE AND TEL#)
|
||
03 00000 - 32767 SID1 NAM 1 SYSTEM ID
|
||
04 0 OR 1 LU NAM 1 LOCAL USE MARK
|
||
05 0 OR 1 E1 NAM 1 MIN MARK
|
||
06 333 OR 334 IPCH1 NAM 1 INITIAL PAGING CHANNEL
|
||
07 2 DIGITS AACCOLC1 NAM 1 ACCESS OVERLOAD
|
||
08 0 OR 1 PREF NAM 1 PREFERRED SYSTEM (SEE NOTES)
|
||
09 00 TO 15 GIM1 NAM 1 GROUP ID (10 FOR USA)
|
||
10 0 OR 1 RI1 NAM 1 ROAM INHIBIT
|
||
11 0 OR 1 DTX1 NAM 1 VOX OPERATION
|
||
12 0 OR 1 AR1 NAM 1 SYSTEM BUSY REDIAL
|
||
|
||
If you selected 0 in step 01 go to step 24.
|
||
|
||
13 10 DIGITS NO2 NAM 2 MIN (AREA CODE & TEL#)
|
||
14 00000 - 32767 SID2 NAM 2 SYSTEM ID
|
||
15 0 OR 1 LU2 NAM 2 LOCAL USE MARK
|
||
16 0 OR 1 E2 NAM 2 MIN MARK
|
||
17 0333 OR 0334 IPCH2 NAM 2 INITIAL PAGING CHANNEL
|
||
18 00 TO 15 ACCOLC2 NAM 2 ACCESS OVERLOAD CLASS
|
||
19 0 OR 1 PREF2 NAM 2 PREFERRED SYSTEM (SEE NOTES)
|
||
20 00 TO 15 GI2 NAM 2 GROUP ID (10 IN USA)
|
||
21 0 OR 1 RI2 NAM 2 ROAM INHIBIT
|
||
22 0 OR 1 DTX2 NAM 2 VOX OPERATION
|
||
23 0 OR 1 AR2 NAM 2 SYSTEM BUSY REDIAL
|
||
|
||
24 4 DIGITS SEC SECURITY CODE
|
||
25 0 OR 1 EE DTMF SIGNALLING (SEE NOTES)
|
||
26 0 OR 1 C TONE CONTINUOUS DTMF
|
||
27 0 OR 1 AL AUTO LOCK
|
||
28 0 OR 1 BO HORN ALERT
|
||
29 0 OR 1 BEEP SERVICE ENTRY BEEP
|
||
|
||
|
||
NOTES:
|
||
|
||
Preferred system and end to end signalling are automatically set on the
|
||
99X model.
|
||
|
||
To install lock code: With phone out of programing mode press FCN, 7,
|
||
NNNN LLL CLR (where NNNN is 4 digit security code and LLL is new lock code).
|
||
|
||
LOCK: F 2. UNLOCK: Enter three digit code.
|
||
|
||
SYSTEM SELECT: F 1 displays current, then one of the following to change, CLR
|
||
to exit: 0 = Pref/Non pref, 1 = Non pref/pref, 2 = Home only, 3 = Pref only,
|
||
4 = Non pref only. |