textfiles/messages/ALANWESTON/1995/DLPH07_02.txt

4865 lines
169 KiB
Plaintext

read new nonstop follow
92730 2-JUN 01:09 Telecom (6809)
RE: Anybody home? (Re: Msg 92729)
From: RICKLT To: WDTV5
It seems not much is going on lately, but I keep checking in faithfully
for each days messages. Hopefully it will pick up again. Rick
-*-
92746 4-JUN 14:51 Telecom (6809)
RE: Anybody home? (Re: Msg 92730)
From: 01GEN40 To: WDTV5
Hello Gene,
I was wondering about this same thing when I first logged on
this morning, 6/4. There were about 28 or so messages in this
Forum in one weeks period. Has everyone gone on vacation all
at the same time??? It is getting quite thin out here! This
is not the first time I have seen less than 30 messages in just
a weeks time either. It has happened a few times. I can see
the lack of messages when everyone goes to the Fests.
Oh, BTW Gene. I have finally had GREAT success with this
RLL(MFM) HD. I am booting from it, it is 100% restored and I
love it! I do not have to wait for the HD any more before I
start the CoCo. This HD is ready to go in no time. I thank
you from the bottom of my heart for all the help and just plain
positive feedback you have given me.
I have one of those external floppy drives that Tandy had
at one time (less the drive) and have installed the HD in it.
I have a fan mounted on top of the case to suck cool air into
it to keep it running cool. I can actually leave it running
without worrying about it spewing its inards all over my desk!
Once again, THANKS Gene and thanks to any and all who have
held my hand through this ordeal, THANKS!
See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92747 4-JUN 15:04 Telecom (6809)
RE: Anybody home? (Re: Msg 92746)
From: WDTV5 To: 01GEN40
Gee, I hope that fan is solid. The floppies supplies weren't rated for
what is euphamisticly called CCS. The fan will hold it for a while, but
I'd bet that transformer isaround 250 degrees down in its core.
I'd look around for a pc supply and hang it onto the back of the box, or
even lay it on the floor running the cable up to the drive box. Thats what
I have here, but it was big enough to run it all, 4 drives, the coco3 and
the mpi. The coco3, with a 2 meg ram kit, never rises more tna 10 degrees
over room temp even with a bunch of junk laying on the top! The only
problem is the noise the pc's fan makes, it needs a muffler. 5x noiseier
than the fan in the Amiga 2k on the next table. I have more mail so better
go.
Cheers, Gene, Gene
-*-
92748 4-JUN 15:33 Telecom (6809)
RE: Anybody home? (Re: Msg 92747)
From: 01GEN40 To: WDTV5
Hello again, Gene,
The case my HD is in has no power supply. I have removed it and
the cable connector as well. I run the HD cables through the slot
in the back of the case. As well, the power cable too. I have the
HD powered by a tower case power supply, 250 Watt, should power
most anything. One of these days I may get ambishish enough to
have that power supply run everything. This Tandy external floppy
case is a half height white plastic cover that slides over a steel
chassis. It was designed, I think, for their Tandy 1000 line of
PCs. I have no worries about the fan keeping it cool, as a matter
of fact, I just reached over and touched the case in various spots
and it is completely cool to the touch. :-) I just lifted it and
fealt the steel chassis and it is just slightly warm, not much
more than the plastic case. My CoCo is definitely warmer then my
HD is! I feel that this HD will last me for quite some time.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92749 4-JUN 21:36 Telecom (6809)
RE: Anybody home? (Re: Msg 92748)
From: WDTV5 To: 01GEN40
Ahh Soo; I was preaching to the choir so to speak. Yes, the power can do
the whole thing. I expect if it sneezed, there isn't enough load on the
5 volt line to restart it. Thats been my findings here. Putting the whole
thing on that supply would be a great idea. The mpi is harder to convert
than the coc was for me. The coco went just fine till I tried to use
the seriel port 6 months later and discoverd I didn't have power on the
buffer chips for it! Nother jumper 4" long and the case top hasn't been
off since except to put the 2 megs kit in. Rigging the mpi takes a bunch
of thought and circuit traceing due to that device having its regulator
reference chip in an odd place on the board. Once done tho, its all
coolsville.
Cheers Gene, Gene
-*-
92781 11-JUN 11:43 Telecom (6809)
RE: Anybody home? (Re: Msg 92749)
From: 01GEN40 To: WDTV5
Hello Gene,
I do not know how long it will take me to make a decision on
whether to power everything from the 1 supply or not. But, when I
do and if I decide to goe with it, you can be sure that I may have
more than my share of questions on the procedure. I do have the
Service Manual for the CoCo 3 and I am certain that that will be
of great help. I am learning to build curcuits from schematics in
this Computer Repair course and I must say it is most enjoyable to
build one and have it work right without seeing billows of smoke
rising. So far I have only burned one component, a Zener diode.
I was working late and the lesson told me to place a resistor in
one connection and momentarily touch another component lead. I
touched the wrong lead and the diode smoked and burned my fingers.
That should have said 'diode', 3 lines up, not resistor! I only
had the 2 Zener diodes and I had future curcuits that needed both
so I bought a pack of 6 for the same price that I could have got-
ten 1 from the school. Needless to say, I did not burn any more
diodes! Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92794 12-JUN 22:57 Telecom (6809)
RE: Anybody home? (Re: Msg 92781)
From: WDTV5 To: 01GEN40
Gee, why does that not surprise me? 'cause I've done it too, several times
in the last 45+ years of lassoing electrons for a living!
Cheers Gene, Gene
-*-
92821 18-JUN 12:00 Telecom (6809)
RE: Anybody home? (Re: Msg 92794)
From: 01GEN40 To: WDTV5
Hello Gene,
I see the real need for an off-line reader now. I think that
this message was in reference to my burning out a diode, right?
If it is, then I guess it can happen even to the best of 'em!
From what I am getting, from people I talk to that know com-
puter repair, it has become mainly a matter of board swapping.
Well, more like board/device swapping. In this day of compu-
ters, users do not want to be left without their "toy" for too
length of time. So, the quickest and easiest way to get it to
the user, in a reasonable amount of time, would be "swapping
out" to determin the faulty device, charge the user for part(s)
and labor and send him/her on their happy way.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
End of Thread.
-*-
92731 2-JUN 06:58 General Information
RE: SCREWY SCREENS (Re: Msg 92728)
From: RONMAGOO To: ADITNAVEL
No, I don't have anything like that, but I do have a Disto RGB signal to
composite monitor convertor. I'll have to check that out... Thanks -=RON=-
-*-
92738 3-JUN 07:30 General Information
RE: SCREWY SCREENS (Re: Msg 92725)
From: RONMAGOO To: WDTV5
This system has a Disto 4in1 board instead of a Multi Pak. I don't
even get a sign-on or a cursor. After doing some testing with a spare
machine, I am sure something is wrong with the upgrade boards, but it
bothers me what caused it ! I checked several items on the Coco board
that were memtioned in the service manual. At least what I checked is
still OK. I just worry about blowing replacements also if I haven't
resolved what caused them to fail in the first place. Thanks for your
interest.
-= RON =-
-*-
92740 3-JUN 20:40 General Information
RE: SCREWY SCREENS (Re: Msg 92738)
From: WDTV5 To: RONMAGOO
Humm, I'd almost bet a beer theres an address line messed up. This is one
of those that will nearly always require an oscilloscope (sp) to trace
out. I've got a good 100 mhz scope, but thats not doing you any good if
my probes won't reach to your 20. Theres a couple of folks here who can
do this sort of thing, Marty and Ricku come to mind first. ?Whats it do
if the SCII is pulled, do you get an rsdos signon then?
Cheers - Gene
-*-
92753 4-JUN 23:44 General Information
RE: SCREWY SCREENS (Re: Msg 92740)
From: RONMAGOO To: WDTV5
I do have a friend with an oscilloscope, but he says he needs a signal to
read waveforms. With no cursor, I don't see how I can give him any. I'LL
try pulling the SCII and see what that does.
-= RON =-
-*-
92756 6-JUN 00:16 General Information
RE: SCREWY SCREENS (Re: Msg 92753)
From: WDTV5 To: RONMAGOO
Humm, not too sure the friend would know what he is looking at! Not having
a cursor is a very small item compared to seeing if the system clock is
actually ticking away at 1.879 mhz for instance. And that s/b 1.79 mhz, darned
fat fingers here. What I'm trying to say is theres lots more to check besides
the video output line in there. Strip it to just the coc and the monitor, then
see what you get, both on the monitor, and on a tv! The monitor might even be
at fault, thats why the temporary tv check.
Cheers Ron, Gene
-*-
92758 7-JUN 06:56 General Information
RE: SCREWY SCREENS (Re: Msg 92756)
From: RONMAGOO To: WDTV5
My friend has clanced at the service manual. He know a lot more about it
than I do. He is on vacation. I sent my memory boards off the Tony at Disto
to check them out. I'll keep you posted when my friend get back and I hear
from Tony.
-= RON =-
-*-
92760 7-JUN 22:21 General Information
RE: SCREWY SCREENS (Re: Msg 92758)
From: WDTV5 To: RONMAGOO
Gee I hope this reply works better than attempted mail replies this evening,
I quit trying to reply my mail after the first 2 msgs and my replies fell
into a black hole with some kind of a "device full" message! Anyway, do
keep us posted!
Cheers, Gene
-*-
End of Thread.
-*-
92732 2-JUN 16:20 General Information
Messages
From: MROWEN01 To: ALL
Hi,
Several people have been commenting on the lack of messages in the forum
lately. I believe that many people have been moving to Internet sources. I
check in here often myself. The Cocolist server always has more messages. It
also allows you to communicate with a larger community of users. As I said, I
still read the forum messages, but the real action now seems to be on the
internet list servers. If anyone needs help getting on a listserver, let me
know. You're missing alot if you don't subscribe! Thanks.
Mike Rowen
mrowen01@delphi.com
rowen@fwa.natp.gmeds.com
-*-
92733 2-JUN 20:17 General Information
RE: Messages (Re: Msg 92732)
From: THETAURUS To: MROWEN01
Personally I hope things start picking up here again soon. It probably will
we just need more interesteing topics to go on. It's mptnot like nothing
new is going on in OS-9Ville :-)
I just hope the addition of the Internet access isn't gonna kill us<G>
-*-
92734 2-JUN 21:15 General Information
RE: Messages (Re: Msg 92732)
From: CLTUCKER To: MROWEN01
How does one reach the Cocolist server on the Internet? Commands,etc?(g)
cl
-*-
92735 2-JUN 22:16 General Information
RE: Messages (Re: Msg 92734)
From: MROWEN01 To: CLTUCKER
In case you don't already know....
A listserver is a host that maintains a "member" list. You "subscribe" to
listservers to be added to their list. Each subscriber mails to the list-
server and the list server echoes the message to everyone in the list. The
result is similar to a forum here, but you only require internet mail access.
To subscribe to the coco listserver, enter mail and then at the TO: prompt
enter : internet"listserv@pucc.princeton.edu"
You can leave the SUBJECT: field blank. In the body of the message type :
SUBSCRIBE COCO Your Name
Your Name should be your first and last name. Then send it <Ctrl Z>.
You will get a message telling you that you've been added to the list. To
send a message to everyone on the list address any mail to :
coco@pucc.princeton.edu
If you don't like being on the list, follow the above proceedure but use
UNSUBSCRIBE in the body of the mail message. You will also get a message
from the listserver abouyt how to get more info on commands. Hope this helps.
I wouldn't abandon this forum, but it does expand your horizons. Regards!
Mike Rowen
VP OS-9/6809
OS-9 Users Group
mrowen01@delphi.com
rowen@fwa.natp.gmeds.com
-*-
92736 2-JUN 22:44 General Information
RE: Messages (Re: Msg 92733)
From: JOHNREED To: THETAURUS
> Personally I hope things start picking up here again soon. It probably
> will we just need more interesteing topics to go on. It's mptnot like
> nothing new is going on in OS-9Ville :-)
>
> I just hope the addition of the Internet access isn't gonna kill us<G>
>
Not to worry. Memorial day. Summer has finally arrived. People
doing other things.
As far as Internet access, its great, but we will ALWAYS want someplace
(like they said in the `Cheers' TV series) "where everybody knows your
name".
-*-
92737 3-JUN 05:39 General Information
RE: Messages (Re: Msg 92735)
From: LMCCLURE To: MROWEN01
It should also be mentioned that the Color Computer maillist can be
accessed as a newsgroup via the Usenet reader on Delphi by accessing it
as "bit.listserv.coco".
This has several advantages over the mail method, cheif among them
being able to read selective topics, and do a nonstop read of all new
messages.
-*-
92741 3-JUN 21:03 General Information
RE: Messages (Re: Msg 92735)
From: JOHNBAER To: MROWEN01
Mike,
> If you don't like being on the list, follow the above proceedure but use
> UNSUBSCRIBE in the body of the mail message.
Or if the UNSUBSCRIBE doesn't work, use SIGNOFF instead. Some `List'
want signoff, and I believe the coco list is one.
> I wouldn't abandon this forum, but it does expand your horizons. Regards!
Abandon.. heck no :) just try'n to stay inline with the 'ol 20/20 plan <G>.
John -
-*-
92752 4-JUN 22:52 General Information
RE: Messages (Re: Msg 92741)
From: MROWEN01 To: JOHNBAER
I have successfully used UNSUBSCRIBE on the Cocolist, it's been awhile thoug,
so it might have changed.
-Mike
-*-
92757 6-JUN 01:17 General Information
RE: Messages (Re: Msg 92752)
From: JOHNBAER To: MROWEN01
I here ya Mike, but I remember reading a message awhile ago, that
you can use `signoff'... still, couldn't hurt knowing about both :)
John -
-*-
92759 7-JUN 19:22 General Information
RE: Messages (Re: Msg 92734)
From: CARL_D To: CLTUCKER
The easiest way to connect to the list service is with Delphi's NN reader. I
think it defaults to the alt.answers group. From there enter 'G' and then coco.
NN will ask if you want to goto bit.listserve.coco, hit return and enjoy.
-*-
End of Thread.
-*-
92739 3-JUN 12:25 Telecom (6809)
RE: Z modem (Re: Msg 90325)
From: EARLCASPER To: TIMKIENTZLE (NR)
What's the name of your new bood on data transfer protocols? - Earl
-*-
92742 4-JUN 13:19 General Information
RE: Visability (Re: Msg 92719)
From: 01GEN40 To: THETAURUS
Hi Chris,
Ya know what? I saw the envelope that that form is in just this
morning and said to myself "Oh %#$&, I forgot it again!", so, I
am making a note right now... jotting... There, now I will get it
done! I have got so many things going on right now that I just do
not know whether I am coming or going. I finally got this HD going
on the CoCo, just about half an hour ago. As I was restoring back
to the HD I was working on this Computer Repair lesson which is a
hands on. Been doing some soldering and constructing and reading...
Anyway, now that the CoCo is back on line I had to get on line
here. I promise, I will get that form filled out and in the Snail
Mail tomorrow 6/5. Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92744 4-JUN 14:06 General Information
RE: Visability (Re: Msg 92723)
From: 01GEN40 To: DBREEDING
Hi, again, Dave,
Yes, if ever I get the chance, you may see me at one of these
Fests! I really would like to meet the people I associate with
out here.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92750 4-JUN 22:24 General Information
RE: Visability (Re: Msg 92742)
From: THETAURUS To: 01GEN40
You are a busy man Gene! Glad to hear the HD is working now, and am looking
forward to your entry form. This month's MOTD will have the entry form
for BBS Sysops/users to fill out for those who operate or know of
OS-9/Coco related BBS'.
See UaYa
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92782 11-JUN 11:48 General Information
RE: Visability (Re: Msg 92750)
From: 01GEN40 To: THETAURUS
Hi Chris,
I sent the form on the 5th, Monday, so you should have received it
by now, I would say. Thanks for the reply... See ya among the
stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92801 14-JUN 22:08 General Information
RE: Visability (Re: Msg 92782)
From: THETAURUS To: 01GEN40
>>I sent the form on the 5th, Monday so you should have recieved
it by now, I would say.<<
Gene, I hate to be a pain but could you possibly send it again.
I can remember getting it, but somehow, I must have screwed up
somewhere, because I can't find it. It's possible that I deleted
it with all my other mail messages by accident without extracting
it to my userlist.txt file. That would be my first time doing
this, but I can't think of anything else I might have done as all
the other names are in the file.
Sorry about the hassle :-(
Btw, thanks all of you who have so far responded to my previous
forum request for entry returns. Keep them coming, those of you
who haven't responded yet, we still need your names to be added.
This sourcebook will be moot if it's all blank.
Thanks...
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92822 18-JUN 12:08 General Information
RE: Visability (Re: Msg 92801)
From: 01GEN40 To: THETAURUS
Hi Chris,
I sent the form in by Snail Mail, maybe it is slower than we
thought. I just happened to make a copy of it with my entries
so I will send it again. I think I may even send it to you
here after I put a text file together. One way or another, you
will get it.
You know, I was just thinking. Could you imagine what an
undertaking it would be if this was being done for the PCers?
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92867 22-JUN 20:43 General Information
RE: Visability (Re: Msg 92822)
From: THETAURUS To: 01GEN40
>>I sent the form in by Snail Mail, maybe it is slower than we
though.<<
Ahhh, ok, never mind. I didn't know you snail mailed it. I must
have confused you with someone elses email return. I probably
won't get it for a little while, until there are a reasonable
amount of snail mail returns, since they don't go directly to me.
They go to the UG secretary I believe(am I right Howard?) who then
mails them to me after some accumulation. Now we don't have to
worry :-)
>>You know, I was just thinking.<<
Man, I better jump on that bandwagon SOON....<grin>.
>>Could you imagine what an undertaking it would be if this was
being done for the PCers?<<
I'd rather not<Grin>. But on the other hand, if the actions of
the UG should happen to help make that Sourcebook grow to PC
proportions in the future, I won't be the LEAST BIT upset ;-)
See Ya, and thanks for getting your feet in the water so to
speak!
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92892 25-JUN 12:18 General Information
RE: Visability (Re: Msg 92867)
From: 01GEN40 To: THETAURUS
Hi Chris,
>...thanks for getting your feet in the water so to speak!
I have been using OS-9 since 1989 so I would say that I am
about up to my hips in that water! As long as I do not get
in over my chin, I think I will be alright. I hope noone gets
the wrong idea about that last statement. I just mean I am more
at ease with OS-9 than with MS-DOG!
Oh, by the way, I forgot to re-send that form, but since the
situation has been figured out, I guess I do not have to now.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92894 25-JUN 13:36 General Information
RE: Visability (Re: Msg 92867)
From: LUCKYONE To: THETAURUS
Hi Chris,
> Ahhh, ok, never mind. I didn't know you snail mailed it. I must
> have confused you with someone elses email return. I probably
> won't get it for a little while, until there are a reasonable
> amount of snail mail returns, since they don't go directly to me.
> They go to the UG secretary I believe(am I right Howard?) who then
> mails them to me after some accumulation. Now we don't have to
> worry :-)
>
> Chris Perrault
> OS-9 Users' Group
> Sourcebook Coordinator
>
Carl Boll (He set up the mail address when he was president.) was doing
most of this but for 1 or 2 months, and maybe longer,
I will be getting the smail. Carl is working in Mexico for awhile and his
wife, June, is collecting our mail and then mailing it to me. I expected a
packet this week but so far it hasn't come. When mail does come I will
expedite it .
Howard
-*-
92907 26-JUN 19:55 General Information
RE: Visability (Re: Msg 92892)
From: THETAURUS To: 01GEN40 (NR)
>>...so I would say that I am about up to my hips in that
water!<<
In that case let me remove all toasters and blow dryers from the
area<grin>.
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92908 26-JUN 19:55 General Information
RE: Visability (Re: Msg 92894)
From: THETAURUS To: LUCKYONE
>>When mail does come I will expedite it.<<
Thanks for clearing that up Howard. If it should be less
expensive or easier on your end to accumulate some before sending
them out, feel free to do so. Either way is fine with me, but I'm
in no rush to enter the names into the database, as I'm still
waiting on a LOT more user entries before I actually start the
data entry.
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
End of Thread.
-*-
92743 4-JUN 14:00 General Information
RE: Fest (Re: Msg 92722)
From: 01GEN40 To: DBREEDING
Hi Dave,
Well, let us hope I can answer all your inquiries as I am reply-
ing on-line. :-/
As for the HD, I now have it up and running as an MFM, which is
what the drive physically and electronically is anyway. The only
part of the kernal that is modified is the BOOT module. This is
so that the Kernal is loaded from tracks 128 and 129. Floppies
have the kernal on track 34. I have a disk that has the modified
kernal and the OS9Boot file on it only. This for transfering the
"boot" to the HD. I have another boot disk with the BOOT module
patched back to its original condition, this so that I can boot
from floppy.
The XT-ROM, from B&B, goes through a memory test when first
powered up. Then it goes to look for a boot on the HD. If there
is one, it boots, if not it will automatically go to drive /d0
to look for a boot there and if found it will boot, otherwise it
returns control over to the ROM in the CoCo.
I am now using my original CoCo with 6809 in it. I tore the
whole system apart and cleaned all connections, blew out any dust,
etc. and so on... I put the system back together with the 6309
CoCo and the darned thing crashed hard when tring to format a
floppy. I pulled it and have had no problems since. As a matter
of fact, and this sounds kinda strange, the display on my CM-8 is
much brighter with this CoCo than with the 6309, so...
I have the memory checker that came with my first 512K upgrade
and I ran it on the 6309 CoCo for about 3 hours with no errors
reported, so I do not believe the problem is with memory. I do
have the service manual for the Color Computer 3 but I do not
have any equipment such as an O-Scope to run any tests on it.
About the HD running as an MFM... I have learned, through all
of this that there is no difference between an MFM and an RLL.
This ST-238R RLL HD is nothing more than an ST-225 which has been
certified by Seagate that it will format out with 50% more space.
That's it! The difference is the controller which is designed
to squeeze the bits closer together in the same amount of disk
space. The drive is certified, given a new model number and
voila, you have a 20Meg HD that will give you 30Megs of storage
space.
Well, I think I have answered some of the major queries here,
I know there were more questions but I have gone past the alotted
time that my short term memory will retain information. If there
were any others that you need answered, just let me know.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92769 9-JUN 19:52 General Information
RE: Fest (Re: Msg 92743)
From: DBREEDING To: 01GEN40
> Well, let us hope I can answer all your inquiries as I am reply-
> ing on-line. :-/
I now _hate_ online composition, don't you ?
> As for the HD, I now have it up and running as an MFM, which is
> what the drive physically and electronically is anyway. The only
> part of the kernal that is modified is the BOOT module. This is
> so that the Kernal is loaded from tracks 128 and 129. Floppies
> have the kernal on track 34. I have a disk that has the modified
> kernal and the OS9Boot file on it only.
> I have another boot disk with the BOOT module
> patched back to its original condition, this so that I can boot
> from floppy.
That was as I suspected it was.
> The XT-ROM, from B&B, goes through a memory test when first
> powered up. Then it goes to look for a boot on the HD. If there
> is one, it boots, if not it will automatically go to drive /d0
> to look for a boot there and if found it will boot, otherwise it
> returns control over to the ROM in the CoCo.
That is a sensible setup. Makes it very versatile.. The only change
I would have made if I were doing it would be to check the floppy
first. That way, you could have a "standard" boot on the HD, but
when you wanted to do a "custom" boot, just stick a boot floppy in
and go.
> I am now using my original CoCo with 6809 in it.
> {...}
> I put the system back together with the 6309
> CoCo and the darned thing crashed hard when tring to format a
> floppy. I pulled it and have had no problems since. As a matter
> of fact, and this sounds kinda strange, the display on my CM-8 is
> much brighter with this CoCo than with the 6309, so...
That sounds odd.. Could it be timing? I've not had any problems with
my 6309. My system got to where it would not format a floppy with the
MPI installed, never got it fixed. What 6309 system do you have? Nitro
or PBoost? I have PBoost, and found that they apparently have some kind
of bug in the piping system.. I was running an application piping the
input from an extremely long file, and the PBoost system was apparently
losing characters or something.. in the pipe. I used a standard 6809-
style boot (with the 6309 still in) and the pipe worked wonderfully.
> Well, I think I have answered some of the major queries here,
> I know there were more questions but I have gone past the alotted
> time that my short term memory will retain information.
Heheh.. It's hard to keep everything in mind when trying to compose from
memory.. TTYL...
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92783 11-JUN 12:03 General Information
RE: Fest (Re: Msg 92769)
From: 01GEN40 To: DBREEDING
Hi Dave,
First of all, if I want to boot from a custom floppy, I can
always put the MPI switch on slot 4 but, I can bypass the XT-
ROM with a key sequence when first powered up.
As for the 6309, I was running it in "6809" mode. I do have
PowerBoost, but I quit using it for one reason or another. I
do not remember why, but there was a reason. I have not gotten
around to getting NitrOS9. I basically wanted the 6309 simply
for the fact that it runs quite a bit cooler than the 6809.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92834 19-JUN 20:48 General Information
RE: Fest (Re: Msg 92783)
From: DBREEDING To: 01GEN40
> First of all, if I want to boot from a custom floppy, I can
> always put the MPI switch on slot 4 but, I can bypass the XT-
> ROM with a key sequence when first powered up.
That sounds neat. I never fooled with the B&B so I never did know
just how it _did_ work. From what you say here, it sounds pretty
well thought-out.
> As for the 6309, I was running it in "6809" mode. I do have
> PowerBoost, but I quit using it for one reason or another.
I have my coco in native mode. I have not really had any problems with
it, except I _did_ find that it somehow messes up on an exceedingly long
pipe sequence. I didn't find out about this till less than a year ago.
I had rewritten a database-type program - well, it was a lotto analysis
program, I plan on uploading it soon. Anyway, I had a pretty large database,
but didn't want to key everything back in. I wrote a little filter program
that would read a text output from the original and send the data into the
program via pipe, whereby it would do the same input you would have done
by manually doing it at the keyboard. I first did it on my OSK machine,
it worked perfectly. When I recompiled it on the coco, it would not work
for anything. It was obvious that some of the data was being lost somehow.
I studied for quite some time wondering if there was some kind of bug in
the coco library. I tried the standard library (had been using the Kreider
lib) but still no go. Finally, as a last resort, almost in frustration,
I booted up in 6809 mode and lo and behold, it worked !
> I basically wanted the 6309 simply
> for the fact that it runs quite a bit cooler than the 6809.
I'm not sure whether I can tell a tremendous difference between the two
CPU's or not. One thing is for certain. mdir seems to be twice as fast
in native mode.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92890 25-JUN 11:51 General Information
RE: Fest (Re: Msg 92834)
From: 01GEN40 To: DBREEDING
Hi Dave,
>...I booted up in 6809 mode and lo and behold, it worked !
Maybe this is something that the Hitachi needs to learn about,
if indeed it is a problem with the CPU. Or, then again, it may
be that there is something undocumented about the way the 6309
deals with long pipes, who knows.
As for the heat difference between the 6809 and the 6309, I
did see (feel) a definite difference between the 2.
I was just thinking about the pipe situation. I use HDbackup
for doing my HD backups. Wow! That statement took a lot of
thought! :) Anyway, it uses some very long pipe routines and
I had no problem with my backups and doing 1 restore. Everything
worked fine. Oh well!
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92896 25-JUN 19:29 General Information
RE: Fest (Re: Msg 92890)
From: COCOKIWI To: 01GEN40 (NR)
first! The HD63C09E was supposed to be compatible to the
6809...
it was a CMOS version of the 6809......BUT! unknown to MOTOROLA
they found there was more room to play with after they did the
retrofit
SO! they ADDED the extra functions to the chip to make it more
powerfull
.when Motorola found out,they just OMITTED the Extra
INFORMATION
on the NEW functions from the DATA SHEET......
The problem was .MOTOROLA just wanted a clone..and not extra
goodies!
Anyway someone in JAPAN found out about the extra stuff and
started to
find out what they were! hence the differences......
when in NATIVE mode,many things are added,and SLOPPY
programming
causes a lot of the trouble! WHEN a bit is added to a
instruction and the
programmer could not be bothered to MASK the bit,It comes back
to get one
later when the BIT is used by the new chip......that BIT do
something else
that you don,t want it to do!!!! and THAT is the cause of most
problems!
Dennis
-*-
92897 25-JUN 20:10 General Information
RE: Fest (Re: Msg 92890)
From: DBREEDING To: 01GEN40 (NR)
Re: pipe not working well with PowerBoost
> >...I booted up in 6809 mode and lo and behold, it worked !
>
> Maybe this is something that the Hitachi needs to learn about,
> if indeed it is a problem with the CPU. Or, then again, it may
> be that there is something undocumented about the way the 6309
> deals with long pipes, who knows.
I don't think so. It was the same cpu.. I just used a 6809-based
boot disk. I suspect that there was some bug introduced in the
patch. My guess is that they substituted an I$Write for an I$WritLn
or vice versa. What appeared to be happening was that some of the
data was being eaten up.
> I was just thinking about the pipe situation. I use HDbackup
> for doing my HD backups.
> Anyway, it uses some very long pipe routines and
> I had no problem with my backups and doing 1 restore. Everything
> worked fine. Oh well!
Are you running in 6309 native mode, though? This was when I experienced
the problems.
This could have been some fluke, but the same thing ran on my OSK machine
and also ran perfectly when I went back to "standard" OS9 on the coco.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
End of Thread.
-*-
92745 4-JUN 14:20 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92724)
From: 01GEN40 To: DBREEDING
Well, I do not use an off-line reader. When I first started
noticing this anomoly, the first thought in my mind was that it
might have had something to do with the off-line reader, I did
not want to say anything about it though for fear os stepping on
some toes. I do not have one but have been thinking about getting
one for quite some time now. But, since I do not have to pay any
long distance charges for connection, I saw no need.
I am on the 20/20 plan and in April I went over the 20 hours by
spending a lot of time on the Internet. I have to admit, I am
most definitely getting my moneys worth of on-line time. Try that
on CompuServe or AOL! That and FREE connection to boot!!!
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92770 9-JUN 19:53 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92745)
From: DBREEDING To: 01GEN40
> Well, I do not use an off-line reader. When I first started
> noticing this anomoly, the first thought in my mind was that it
> might have had something to do with the off-line reader, I did
> not want to say anything about it though for fear os stepping on
> some toes.
> I do not have one but have been thinking about getting
> one for quite some time now.
What I like about offline readers is the fact that you can use your own
editor and I feel more relaxed this way.
Do you connect to any BBS's? If so, do they support QWK packets? This is
a real saver.. You download whatever forums you want and they are compressed
(the MS-DOS systems kind of insist on ZIP), and then you read them somewhat
like you do with InfoXpress. I really love them... There are some available
for both OSK and CoCo OS-9.
> But, since I do not have to pay any
> long distance charges for connection, I saw no need.
Not having to pay long distance allows you to indulge <G>
> I am on the 20/20 plan and in April I went over the 20 hours by
> spending a lot of time on the Internet.
Well, I am on the standard 4-hour plan.. Mostly I download the OS9 sig
and do a continuous read of the cocolist and comp.os.os9
> I have to admit, I am
> most definitely getting my moneys worth of on-line time. Try that
> on CompuServe or AOL! That and FREE connection to boot!!!
I'm on CI$. About all I do is read the OS9 and the Coco forums. Their
Internet access is not quite as versatile as it is here, to my understanding.
All I've done there has been exchange e-mail with individuals.. I think
they have something like a $.30 charge for each e-mail packet. I've
never gotten any big bills from there, but I try to be careful with my time
there, as I am here.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92784 11-JUN 12:32 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92770)
From: 01GEN40 To: DBREEDING
Hi Dave,
I have not logged onto BBS since about '92 or '93. I never
could derive the pleasure out of them that I can when logging
onto Delphi and with world-wide-access... There is just so
much more to do and see here... I cannot go to the UK or
Finland or Australia from a BBS.
I just picked up The Internet Connection which is a package
of software and 2 videos. Mosaic and Cello are 2 of the pro-
grams, which I really wanted badly. I cannot download them
with my CoCo, well I could but would do my CoCo no good.
There was also GENIE and CompuServe software and a program
called WinNET. For $15.00 I could not pass it up. Now all I
need is to have my 486 up and running. There is also a pro-
gram out here called InterNav, I think. I want to check them
all out, the navigators that is, I see which one I will feel
the most comfortable with. I think WinNET is an Internet
connection software, not sure yet. Nothing in the paperwork
except that it is a GUI with first month free and 5 free hours
of usage time. Oh well!
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92788 11-JUN 19:38 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92770)
From: VE3DAC To: DBREEDING
Hi Dave;
DBREEDING> ll I've done there has been exchange e-mail with individuals..
DBREEDING> I think they have something like a $.30 charge for each
DBREEDING> e-mail packet. I've never gotten any big bills from there,
DBREEDING> but I try to be careful with my time
I have been with Compuserve for many years but I really can't afford to be on
there very often. With the recent price reductions, we now only pay 38 cents
a min. U.S. Convert that to Can $ by adding 35%. Delphi is pretty good at
5 cents a min. Can afford lots of time here.
Now that I have this super OS/2 Delphi only Navigator, its hard to be on
for a couple of hours a month. Log on, download messages from 4 forums
(perhaps 200 or so) deliver any Email or forum replies and off in maybe 3
mins. Manually it would be 10 times that long. Maybe I' m slow!
Really nice to answer mail off line and almost get it right <g>.
Can't think of any way to work OS9 into the thread. But our moderator
doesn't care much.
Cheerio
Merv
Merv Curley
Written at Scarborough, On., 06/09/95 at 11:19pm
-*-
92799 13-JUN 22:09 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92770)
From: TEDJAEGER To: DBREEDING
> Well, I am on the standard 4-hour plan.. Mostly I download the OS9 sig
> and do a continuous read of the cocolist and comp.os.os9
David,
Is it possible to have InfoXpress automate reading the cocolist
and comp.os.os9 during a Delphi session? If so, please share how!
Bests
---TedJaeger
-*-
92800 13-JUN 23:01 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92799)
From: THETAURUS To: TEDJAEGER
I *THINK* he means doing a buffer scroll like what we non IX users do in
forum(rea unread NS I think). I can't remember hearing of IX having that
capability(I owned it for a while but couldn't get it to work).
>Chris<
-*-
92831 19-JUN 06:20 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92784)
From: EDELMAR To: 01GEN40
I've been seeking a low cost Internet connection for some time. May have
found one.
The Company is NETCOM out of San Jose, California. They are offering personal
accounts for $19.95 a month. For this you get 40 hours of prime time usage
and unlimited non-prime time usage each month. They define prime time from
9 A.M. to Midnight local time. There is no activation fee. Service includes
WWW, IRC, GOPHER, FTP, USENET, TELNET and E-MAIL.
Down-side - I don't know if a regular comm program will work. They provide
a program, 'NetCruiser' at no charge. But - it only runs under Windows 3.1.
I haven't contacted them yet to find out whether other software will work.
NETCOM can be contacted at 1-800-353-6600 or 1-408-983-5950. I don't know
if they have connections for our Canadian cousins.
I'm not endorsing NETCOM nor their software. With time, I expect I'll learn
whether this is a good service or not.
Ed Gresick - DELMAR CO
-*-
92835 19-JUN 20:48 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92784)
From: DBREEDING To: 01GEN40
> I have not logged onto BBS since about '92 or '93. I never
> could derive the pleasure out of them that I can when logging
> onto Delphi and with world-wide-access... There is just so
> much more to do and see here... I cannot go to the UK or
> Finland or Australia from a BBS.
Yes, that's true, but in my case, it costs quite a bit more <G>
I enjoy using the BBS's quite a bit. I enjoy cutting up with them
although we could meet face-to-face rather easily, but actually, I
have never knowingly met a single user on one of our local BBS's --
and we live in an extremely small community..
> I just picked up The Internet Connection which is a package
> of software and 2 videos. Mosaic and Cello are 2 of the pro-
> grams, which I really wanted badly. I cannot download them
> with my CoCo, well I could but would do my CoCo no good.
> There was also GENIE and CompuServe software and a program
> called WinNET. For $15.00 I could not pass it up. Now all I
> need is to have my 486 up and running. There is also a pro-
> gram out here called InterNav, I think.
I believe I've seen references to all these in time. I think InterNav
is a really popular package. We don't have a local internet connection
yet. One BBS downloads a few internet newsgroups and the users can
read them. I don't even know if you can reply to them or not.
With a lot of the newsgroups, I've found that there is a tremendous
amount of volume but many have very little useful content. With some
of the more active ones, it is somewhat tedious to try to ingest it
all, and you sometimes cannot tell what the message is about by just
scanning the Subjects. I read the cocolist and comp.os.os9 here. Of
course many of the names of the people are familiar and these are mostly
quite interesting, but some of the other topics are not as thrilling,
at lealst to me.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92836 19-JUN 20:48 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92788)
From: DBREEDING To: VE3DAC
> Now that I have this super OS/2 Delphi only Navigator, its hard to be
> on for a couple of hours a month. Log on, download messages from 4
> forums (perhaps 200 or so) deliver any Email or forum replies and off in
> maybe 3 mins. Manually it would be 10 times that long. Maybe I' m slow!
I believe I'm slower <G>... If I try to type in a message manually I often
wind up with 10-20 minutes online.
> Really nice to answer mail off line and almost get it right <g>.
I'm hooked! I use InfoXpress for my composition. Have you ever used it?
(it's for OS-9) It is designed specifically for CIS and Delphi. I would
sorely dread trying to go back to online composition now.
> Can't think of any way to work OS9 into the thread.
Well, at least you did mention it <VBG>
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92837 19-JUN 20:49 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92799)
From: DBREEDING To: TEDJAEGER
> > Well, I am on the standard 4-hour plan.. Mostly I download the OS9 sig
> > and do a continuous read of the cocolist and comp.os.os9
>
> Is it possible to have InfoXpress automate reading the cocolist
> and comp.os.os9 during a Delphi session? If so, please share how!
There's no way that I know of. What I do with the cocolist and comp.os.os9
is to log on with STerm or other telecom program and read them nonstop
using buffer capture. It would be neat to be able to do so, though..
Hmm... I wonder.. reckon there would be a way to adapt the scripts???
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92838 19-JUN 20:49 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92800)
From: DBREEDING To: THETAURUS
> I *THINK* he means doing a buffer scroll like what we non IX users do in
> forum(rea unread NS I think). I can't remember hearing of IX having that
> capability(I owned it for a while but couldn't get it to work).
Yeah, you got it right.. I just didn't make myself clear..
It would be nice to be able to download them and reply offline.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92889 25-JUN 11:33 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92831)
From: 01GEN40 To: EDELMAR
Hi Ed,
$19.95 for 40 hours sure beats Delphi, but for the time being, I
am quite satisfied with my access to the Internet through Delphi. It
seems to me that I would also experience long distance charges which
I do not with Delphi. I also would much prefer to use software that
does not DEMAND Windoze, until I get OS/2 that is.
At this point in time I am simply a casual user of the Internet. It
is simply a recreational and learning experience for me. Since
Star Trek is my main, for lack of a better term, passion, I just
read the Usenet Group messages on the subject. I also go into
Paramounts WWW home page. I do do an FTP from a site in Finland
about 6 months ago or so. (/\ that should have been 'did')
I have never said that I was a great typist, but for not having any
formal training, I think I do a pretty good job of it.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92891 25-JUN 12:07 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92835)
From: 01GEN40 To: DBREEDING
Hello again,
I am basically a casual user of the Internet. Recreation and
learning... I am a very avid FAN of Star Trek. I go to the
Usenet and read the messages online. All of the active, I
cannot think of a good term to use here... uh humm, how about
senders, have taken identities based on Star Trek and have an
ongoing story line where the participants write bits and pieces
of a story. Reading them is like reading a Star Trek novel while
online. It is very fascinating how they can keep within the par-
ameters set down by Gene Roddenberry. They stay, definitivly,
in the Star Trek universe without swaying from Genes guidelines.
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92898 25-JUN 20:11 General Information
RE: Chopped-up Threads?!?! (Re: Msg 92891)
From: DBREEDING To: 01GEN40 (NR)
> I am basically a casual user of the Internet. Recreation and
> learning...
I am an _extremely_ casusl user of the Internet so far. With my setup,
it just costs too much to get deeply involved.
We are supposed to get a local access to the internet sometime this
summer. As I hear it, our phone company may make the access available,
and also there is a BBS that is going to have some access. Right now,
the BBS is providing something like a Net access to a few newsgroups.
They make a long distance call each night and download the newsgroups.
I'm not sure if they are offering reply access yet or not.
Your Star Trek group would probably be quite intriguing for one who is
an avid fan. I've found that many of the newsgroups that discuss some
topic usually have a lot of exchange, but very little progress in
reaching a conclusion.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
End of Thread.
-*-
92751 4-JUN 22:29 General Information
OS-9 Latenight Schedule
From: THETAURUS To: ALL
OS-9 Late Night
Conference Schedual
For February AND March
Date Time(EST) Topic
June 5, 1995 10:00 PM Open Forum
June 12, 1995 10:00 PM Let the Games Begin!
What are your favorite OS-9 and Coco based games? There
have been many to come along over the years, not even
including what is available for CD-I! What new games would
be nice to see? Gaming enthusiasts will want to be onhand
for this :-)
June 19, 1995 10:00 PM Open Forum
June 26, 1995 10:00 PM Open Forum
July 3, 1995 10:00 PM Open Forum
July 10, 1995 10:00 PM Beginners Night!
How do I set up OS-9 correctly? What modules should I
patch/leave alone? What apps should I buy, where can I get
them? Why do I keep getting this (#'%("!(%&! error 216
message!? Find out all this and more on Beginners' night!
July 17, 1995 10:00 PM Open Forum
July 24, 1995 10:00 PM OS-9 User's Group
Discussion
Mike Rowen, the Vice-President of the OS-9 Users' Group
representing the Level's I and II users of OS-9, will be on
hand. He is going to cover ideas for upcoming projects to
maintain activity for those using OS-9 on a 6809 or
compatible based machine(Coco 3,Dragon, etc..). If you are a
Level I or II user you will want to attend and give Mike any
feedback you may have, or drop him a line and let him know
if you are available to to get involved in any future
projects.
July 31, 1995 10:00 PM Open Forum
-*-
92785 11-JUN 12:37 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92751)
From: 01GEN40 To: THETAURUS
Hey Chris,
This message said: ...Conference Schedual for Febraury AND
March... But, the dates are for June and July. What gives?
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92802 14-JUN 22:08 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92785)
From: THETAURUS To: 01GEN40
>>... But, the dates are for June and July. What gives?<<
My competence<G>. I just reposted a corrected version of that. I
forgot to change the header(I keep the same header and just edit
it for each schedule).
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92823 18-JUN 12:13 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92802)
From: 01GEN40 To: THETAURUS
Hi Chris,
>> ... (I keep the same header and just edit it for each
>> schedule).
Ahh, that was exactly my thought on this. Just thought I
would point it out. :)
Thanks for the reply... See ya among the stars...
LONG LIVE OS-9! <FOREVER> ** In whatever form it is in!
Peace and Long Life...
Siran of Vulcan (CMDR)
-= GEN =-
-*-
92829 19-JUN 00:51 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92751)
From: JOELHEGBERG To: THETAURUS
Dear Chris,
> OS-9 Late Night Conference Schedule For February AND March:
Just thought I'd drop you a note to thank you for your continued
dedication to the Late Night conferences! It's really great to have
these updates continually stimulating interest here. I know I started
to take these updates for granted lately, and I remember how dull it was
before you took on this task. Hope you know we all appreciate your
efforts!
-- Joel Mathew Hegberg
-*-
92868 22-JUN 20:44 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92829)
From: THETAURUS To: JOELHEGBERG
>>Just thought I'd drop you a note to thank you for your
continued dedication to the Late Night conferences! It's really
great to have these updates continually stimulating interest
here.<<
Warning:I'm gonna get a bit long winded in this message.
Thank you Joel, not only for the kind words but for your active
participation in these conferences as well. As I've stated a
hundred times, I could schedule a conference eight days a week,
but if people don't show then I'm useless. Luckily it hasn't
gotten THAT bad. We've had ups and downs, which you know you're
going to have anyway, but it has been a pretty positive experience
I think. Really, running the conferences are not very difficult at
all. You basically write up the schedule(my format is 2 months per
update, to make it even easier, and to allow time to promote and
build up certain conferences), and show up on Monday night. Even
then if I can't show on Monday, hey I leave a note in forum and/or
to Mike Rowen to tell people just to go on without me<my actually
being isn't even really necessary most of the time when you think
about it).
When I originally started this, I promised myself it wouldn't be
a 'one-night-stand' deal. Others set up conferences in the past
and failed to keep them going due to lack of interest, and I
wanted to make sure that this would be a long term success, unlike
those. 'Course Boisy's OS-9 Live! was an exception(wouldn't mind
seeing that again). He just had a million other things to juggle
and Late Night happened to be there to pick up the slack. While we
will have off nights and mishaps, I try and keep things
interesting(the hardest part of my job), so that it maintains long
term success. You'll notice the next schedule to come out will be
Augest/September. You'll never guess what Augest is? Our 1 year
anniversary! I can't remember if any of the other 'classic'
conferences ever lasted that long? I think we've all done a pretty
good job. We have to keep it up! This conference is nothing but a
small symbol of how we should all be active somehow in the OS-9
community, and a token of of my appreciation to those of you
software developers, Vendors, User Group leaders and magazine
publishers who keep things running. I want to be able to give at
least a little back and maybe use this conference and 'that UG
project of mine'<Grin> as a springboard for future developements.
We all have to get our hands dirty, no matter how much or how
little we do. I think you can relate to that.
Anyway, did I ramble everything yet? Oh, if you ever get the
time, go download the transcript of the first conference. I was
reading it just yesterday and it was such a trip, because it seems
like yesterday that we were just starting out. There I was,
wondering if the conference was gonna hold up for a month<grin>.
Luckily persistance paid off, and now OS-9 Late Night is a
permanent fixture on Delphi and the Online OS-9 world.
Another thing, check my upcoming post(maybe the next one, maybe
not), for a special update to the conference schedule. I've
finally been able to confirm a conference I've been trying to get
for months. It will be of extra interest to a DAVID guy like you
Joel! :-) Now if I can just get Delphi to let me put it on their
signon banner!<G>
>>Hope you know we all appreciate your efforts!<<
And I certainly appreciate everyone's support in keeping this
machine going. C'mon everyone, one year is nothing. The OS-9
community certainly has changed over the last couple years and a
lot of 'leadership' has jumped ship in some form or another. Let's
get behind the new leaders such as the new OS-9 UG president and
VP as well as those who are marketing new products for OS-9. If we
stick to it and stay supportive in many ways, we can carve our own
little niche in the computer world that is rightfully ours. I plan
on bringing 'Late Night' along for the long ride! Ok that's it,
sermons over(Brother Jeremy, you're really much better cut out for
this than me :-) ). I could probably think up more to say
but....(running for cover)
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92877 23-JUN 07:14 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92868)
From: MROWEN01 To: THETAURUS
Chris,
You certainly have no shortage of messages this morning! I'm excited
about the D.A.V.I.D. conference. I hope you are serious about posting this
on the Delphi banner! Good work setting it up. I want to second Joel's thank
you to you. I can't believe a year has nearly passed since Late Night started.
I hope that the IRC conference will be as succsessful. Consistency is probably
the most important aspect of these conferences. Thanks for your dedication to
Late Night and also to your newest project, the database. Keep up the great
work!
Mike Rowen
VP OS-9/6809
OS-9 Users group
mrowen01@delphi.com
-*-
92881 24-JUN 01:26 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92868)
From: JOELHEGBERG To: THETAURUS
Chris,
> You'll never guess what Augest is? Our 1 year anniversary!
Wow! That's is definitely something special!
> least a little back and maybe use this conference and 'that UG
> project of mine'<Grin> as a springboard for future developements.
> We all have to get our hands dirty, no matter how much or how
> little we do. I think you can relate to that.
Yes, most definitely. ;)
> Another thing, check my upcoming post(maybe the next one, maybe
> not), for a special update to the conference schedule. I've
> finally been able to confirm a conference I've been trying to get
> for months. It will be of extra interest to a DAVID guy like you
> Joel! :-) Now if I can just get Delphi to let me put it on their
> signon banner!<G>
Yes, Dave Kimble is an excellent pick for the DAVID chat. He's an
exceedingly nice guy and terrific at explaining things. I'm looking
forward to seeing how everyone attending enjoys the conference.
-- Joel Mathew Hegberg
-*-
92882 24-JUN 01:26 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92877)
From: JOELHEGBERG To: MROWEN01
Chris and Mike,
> You certainly have no shortage of messages this morning! I'm excited
> about the D.A.V.I.D. conference. I hope you are serious about posting
> this on the Delphi banner! Good work setting it up.
Yes, great work setting it up. This should be billed heavily to make
sure everyone who may want to attend knows about it far enough in
advance. Plaster the coco and OS-9 listservers with messages and
updates, along with forum and anywhere else you can find. This is
finally a chance for the "underground" community to find out what DAVID
is all about.
Best wishes,
Joel Mathew Hegberg
-*-
92888 25-JUN 11:22 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92868)
From: JOHNBAER To: THETAURUS
Chris,
It's been a year ? <g> Time is flying to fast for me :).
I do believe that this DAVID conference will be a full house.
I know I'll be there.. at least to hear what is going on. A big Thank
You to you and anyone else that got this pulled off.
And I just can't say thank you enough for your effort in doing these
conferences. Yea, I know, if nobody showed, there wouldn't be a conference.
True.. But, if we weren't reminded, I think we would forget fast :)
John -
-*-
92904 26-JUN 19:55 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92877)
From: THETAURUS To: MROWEN01
>>I'm excited about the D.A.V.I.D conference.<<
Your not the only one :-) I'm just hoping that everything pans
out fine. It's so good so far!
>>I hope you are serious about posting this on the Delphi
banner!<<
Well, yeah I'm gonna try. That doesn't mean I'm real confident
that Delphi will follow my enthusiasm but, hey what the heck. I
have to see about their availability of temp accounts(or lack
thereof).
>>Good work setting it up.<<
And don't think for a minute that you are off the hook for your
conference on the previous week<G>. The OS-9 Users' Group Level II
conference is still going to get a big push, rest assured ;-)
>>Consistency is probably the most important aspect of these
conferences.<<
It really is. Since you have been attending since we began about
a year ago, I'm glad to see your the one to tackle the IRC
conference project. You have seen firsthand all the ups and downs
Late Night has had as far as attendance is concerned. Even the
topics began drying up there for a little while. Hopefully this
will leave an impression on you later on when you get the
conference(s) up and running, so you will know that yes, you WILL
have slow nights and stretches of them, with all the outside
factors you will have to face. Just let those negative stretches
come and go and things will always bounce back up, assuming the
people attending put enough effort in to keep things interesting.
It's going to be far from perfect, but from my experience, I think
riding out the downtimes has helped establish Late Night as a
reliable long term conference, rather than a flash in the pan.
>>Keep up the great work!<<
And don't think I'm going to let you take all my Late Night
attendees to IRC with you. If I start drying up, then I'm going to
sneak over their and rename your group name to "GOOD NEWS". That
oughta scare them back here<Grin>.
Thanks Mike, and good luck!
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92905 26-JUN 19:55 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92881)
From: THETAURUS To: JOELHEGBERG
>>Wow! That's is definately something special!<<
I'll have to try and come up with something special for an
anniversary conference.
>>Yes, Dave Kimble is an excellent pick for the DAVID chat. He's
an exceedingly nice guy and terrific at explaining things. I'm
looking forward to seeing how everyone attending enjoys the
conference.<<
This is going to be interesting to see which way this turns out,
because from all I can remember, this is most likely the first
such topic we've had which dealt with OS-9 in a more mainstream
setting. Most of the past conferences have been geared towards
vendors and new product releases,programming and general OS-9
usage, or community related events(fests). This is something I
still want to do(if any interested vendors or individuals will get
in touch with me), but since OS-9 exposure is growing, I thought
I'd make some changes in my 'Late Night Programming'(ok, everybody
slap your knees for that one<Grin>), to reflect that and to start
lending more attention to where it stands in the real world. I
noticed that the past Late Night topics almost all were popular
with the current 'inner circle' users such as those on
Delphi,Fido, and the Cocolist, and had strong Coco ties. Not that
there's anything wrong with that(and I will continue pursueing
topics in that area in the future), but that's ALL we were doing
and not really lending much attention to what is outside of this
'circle' such as D.A.V.I.D.
I do plan on making a few slight changes now in the way Late
Night is done. For example, when possible I want to try and land
one BIG conference at the end of each scheduling period. This
makes for a neat format, and allows for me a month and a half or
more to build the big one up while at the same time pushing the
smaller ones as we go. Some ideas I've had for these BIG
conferences would be more in line with such things as D.A.V.I.D,
in hopes that this is the start of something good. CD-I related
topics(developement, marketing strategies, and discussions with
people in that field), Rave/multimedia related usage and
programming, and maybe even try to get some of the famous folks
from OS-9's past and present online, is where I'd like to go.
In what is my own personal curiosity for what the smaller Coco
Clubs and OS-9 user groups are doing across the country, I'd like
to get a representative from 1 or 2 on each schedule to give them
an opportunity to let us in on what their clubs are up to. I know
the San Diego OS-9 users group has a cool sounding project going
on , and are pushing OS-9 locally from what I've read on the net.
These are people I'd like to get online in the future, as well as
Daltrug,Toronto OS-9 Users' Group,Glennside,Chicago Area OS-9
Users Group,ACS, etc, you name 'em. Late Night is a good medium
for such small clubs who could use the exposure. Add that to the
fact that I am toying with the idea of incorporating the
conferences into an MOTD series in the future, and you could have
even MORE exposure. I believe in stretching the buck, so I am
interested in finding a way for all these activities to benefit
from eachother in different ways. Late Night and the MOTD could be
a heck of a tool in this regard.
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92906 26-JUN 19:55 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92888)
From: THETAURUS To: JOHNBAER
>>It's been a year ? <G> <<
I said the same thing! ;-) It's so funny how I can remember just
hoping that the conf would last more than a couple months no
matter how rough things got, yet a whole year has just about
passed us just like that. That's not a sign of old age is
it?<crossing fingers><G>
-*-
92912 26-JUN 20:02 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92882)
From: THETAURUS To: JOELHEGBERG
>>This should be billed heavily to make sure everyone who may
want to attend knows about it far enough in advance.<<
This is something I am working on now. I'm going to write to
service on the possibility of getting this on either the sign on
or even signoff banner. It may be a hard sell, but there are a lot
of points in favor of D.A.V.I.D getting the Delphi wide
recognition. With the service being on the whole Multimedia/techno
trip right now, it is a logical possibility<just look at the
exposure stuff like Fox's _Sliders_ and other such programming
gets in the banner. Late Night will have a much longer run than
Sliders' I'm happy to say :-) ). Unfortunately I'm not familiar
with how they handle such requests. Also I do want to check out
the Multimedia related forums including Custom Forums and see if
the SIG managers mind if I post an announcement there.
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92921 27-JUN 23:14 General Information
RE: OS-9 Latenight Schedule (Re: Msg 92912)
From: JOELHEGBERG To: THETAURUS
Chris,
> This is something I am working on now. I'm going to write to
> service on the possibility of getting this on either the sign on
> or even signoff banner....
> Also I do want to check out
> the Multimedia related forums including Custom Forums and see if
> the SIG managers mind if I post an announcement there.
Excellent ideas. I would think Delphi would be willing to have a
signon/signoff banner if they know how big this is... not just to us,
but this conference can have a wide appeal. Whether they'll figure out
how important it is... that's another matter.
-- Joel.
-*-
End of Thread.
-*-
92754 5-JUN 20:30 OSK Applications
RIBBS_MM1
From: VAXELF To: ALL
For those who got a copy of the RIBBS Beta disk for the MM/1, let me
know your username here. the ones I have on my list are:
BRUCE GERST
BRIAN KITT
DAVID LADD
JOHN R. STRONG
JAMES JONES
MALCOM CLEVELAND
JOHN EVANS
I can supply the current packed modules via email. Also the first 24hr
RIBBS_MM1 OSK FIDO BBS is now up. It is the OCEAN BEACH BBS. Telephone
number is 619-224-4878.
John A. Donaldson
RIBBS_MM1 Team Leader
-*-
92764 8-JUN 01:14 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92754)
From: NIMITZ To: VAXELF
Please add me to that list. I now have a private node list local to me.
David
-*-
92765 8-JUN 20:22 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92764)
From: VAXELF To: NIMITZ
I added you to the list. I also forgot to add JOEL HEGBERG.
Did you see the posting that Warren made about RIBBS_MM1?? We decided to
start calling the port RIBBS_MM1, since at present, it will ONLY run on
a system that is running KWINDOW. That means for now the MM/1 or MM/1A.
Saw your add in 268m about the MM/1B 306 machine.
John D.
-*-
92774 10-JUN 13:37 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92765)
From: NIMITZ To: VAXELF
VGA port. Hope he gets it
done soon!
-*-
92828 19-JUN 00:46 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92765)
From: JOELHEGBERG To: VAXELF
John,
> I added you to the list. I also forgot to add JOEL HEGBERG.
Yep, I almost spoke up. ;) The program looks great, and I've called
Warren's system several times since he's moved to the MM1 version.
Great work!!
-- Joel Mathew Hegberg.
-*-
92830 19-JUN 01:09 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92828)
From: NIMITZ To: JOELHEGBERG
By the way Joel, I now have fax modem support on a DOS machine, and my MM/1
so, if you like, I could test any Fax Modem support you come up with....
-*-
92844 19-JUN 23:10 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92830)
From: JOELHEGBERG To: NIMITZ
> By the way Joel, I now have fax modem support on a DOS machine, and my
> MM/1 so, if you like, I could test any Fax Modem support you come up
> with....
Great! Now I just have to buy one... <g> And I predict that's in my
future soon. It's amazing what you can do when you get a real job. ;)
-- Joel.
-*-
92845 20-JUN 01:39 OSK Applications
RE: RIBBS_MM1 (Re: Msg 92844)
From: NIMITZ To: JOELHEGBERG
yeah, I hear you. Maybe you'll want to buy some stock!
:)
-*-
End of Thread.
-*-
92755 6-JUN 00:06 General Information
RE: IDE Hard drive adapter? (Re: Msg 92614)
From: RYROWE To: DISTO
I would be interested in your idea. I'm listening......
----Ryan
-*-
92761 7-JUN 23:27 General Information
The World of 68 Micros(new issue)
From: THETAURUS To: ALL
Well I just recently, say a couple days ago, recieved the latest
issue of 'The World of 68 Micros'. I was just wondering if
everyone else recieved theirs' and how'd ya like it(yes, I'm
trying to kick up some conversation<G>)? I thought it was good as
usual and it's nice to see Frank has been able to stay very
consistent, being as busy as he must be. All I have to say is, I'm
probably Chris Dekker's biggest fan right about now, after
following his series on Basic programming. If this article alone
was the only one in the mag I think I'd keep renewing anyway :-)
Frank, don't let this one get away! It's nice to see more Basic09
than just what's in the manual and tour guide.
Btw did anyone see the add for _Mastering OS-9_? I guess it's
ready and out now. If you've already bought it(I do plan on making
a big, MOTHER_OF_ALL_PURCHASES from Farna in the somewhat near
future, with this book included), let us know how it is. Maybe
someone can write up a review? Anyway, once again, good job
Frank, and keep it up :-)
And since I'm on the subject of magazines and articles...There
are quite a few newsletters and mags out there(ok, mostly
newsletters), that will be happy to print your articles. We have
not only 'The World of 68 Micros', but also, the 'MOTD',Glennside
Color Computer Clubs newsletter, 'Coco 1-2-3', as well as MI&CC
club diskletter 'The Upgrade'. There are others out there also,
catering to their specific Coco Club. I imagine the San Diego
Users' Group and Daltrug have respective newsletters. We should
all help these publishers out and put that knowledge to use at the
same time. There is plenty to write about as it relates to OS-9
and the Coco. New Products, system management,programming, current
events and other things that we take for granted online, could be
put in article form for others offline to appreciate.
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92775 10-JUN 14:10 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92761)
From: TEDJAEGER To: THETAURUS
> Well I just recently, say a couple days ago, recieved the latest
> issue of 'The World of 68 Micros'. I was just wondering if
> everyone else recieved theirs' and how'd ya like it(yes, I'm
> trying to kick up some conversation<G>)? I thought it was good as
Just chiming in. Yes, I got my 68 Micros too and thought it was a very
good issue. And like you, I enjoy seeing the BASIC09 code and
explanations of system calls. Stuff to grow on...
Lately I've been messing with CDL BASIC. A lot of promise there if one
can figure out how to do the advanced stuff. I believe I have system
calls from within CDL mastered and have also successfully created
a signal handler. However, when I combine the signal handler with a
system call to read the mouse very strange things happen! Seems like
with the signal handler installed, the system call to read the mouse
no longer puts the mouse values in the variable pointed to by a0.
Trial and error learning is sure a pain, but then two weeks ago I
couldn't fidure out how to do a system call.
Bests
---TedJaeger
-*-
92790 12-JUN 00:19 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92761)
From: DSRTFOX To: THETAURUS
The new version of "Start OS-9" was retitled "Mastering OS-9" as this is
more consistent with the content. All the info files have been revised and
updated, and some have been added from Rick Ulland (making boot disks the
easy way!). The tutorials were all rewritten to be easier to follow with
fewer, but more logical, steps. And best of all, there is a complete INDEX
and easy to find references in the sidebars of every page.
Francis (Frank) Swygert
Publisher, "the world of 68' micros" Magazine
`[1;37;44mRainbow V 1.11 for Delphi - Registered
-*-
92792 12-JUN 01:07 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92790)
From: NIMITZ To: DSRTFOX
Now all we need to do is get it passed through a System IV /System V and an
MM/1 user and get the OSK version out!
-*-
92796 12-JUN 23:14 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92775)
From: THETAURUS To: TEDJAEGER
>>And like you, I enjoy seeing the BASIC09 code and explanations
of system calls. Stuff to grow on...<<
I'm the type who can really never get quite enough information.
I wish they had a whole new book on Basic09 programming(I've got
Hiiiiiigh Hopes...), since the B09 section of the OS-9 Manual
still leaves some to be desired. It's not that they didn't put a
lot in there are just so many techniques that can be used that
could fill a whole book. Looking over other people's source
listings in 268m is helpfull, since I like to see how the more
experienced people handle such things as syscalls and graphics
programming, array structuring, and all that neat stuff. It's fun
to read about and learn but once your actually programming and
getting stumped for too long a time, it can be painfull<G>. OS-9
Underground also used to have some real neat B09 listings before
they started mailing out the new style transparent issues<G>.
Btw, didn't you have an article in 268m recently, or as I
believe, some of your code was published? I believe this is the
first one I saw that demonstrated using escape codes to achieve
gfx2 type graphics calls. For some reason(inexperience?), while it
is perfectly logical(gfx2 calls are basically escape code
routines), it never did dawn on me that this could be done. Thanks
for shedding some light ;-)
>>Lately I've been messing with CDL BASIC.<<
It is nice to finally see a REAL BASIC compilor for OS-9! I take
it you like it so far? While I do intend to learn C(am starting a
programming AD course in college), I think CDL Basic would most
likely be one of my first software buys when I go OSK. I can't see
me getting a system without it. Is there any reason to use Basic09
do you think with CDL. Are there still any advantages to it?
I'm glad you are getting the hang of it. We could sure use more
OSK developers, and it will be cool to see CDL Basic attract some
of them(you already have a product or three on the market don't
you?). If you get a chance, let us know when you work out the
mouse problem. I've been getting the hang of Syscall a little
better but still am a bit illiterate on it<G>.
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92804 14-JUN 22:30 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92796)
From: TEDJAEGER To: THETAURUS
> Btw, didn't you have an article in 268m recently, or as I
> believe, some of your code was published? I believe this is the
> first one I saw that demonstrated using escape codes to achieve
> gfx2 type graphics calls. For some reason(inexperience?), while it
Yes, that was me. Joel published code of mine in perhaps four issues.
Last summer I was spending quite a bit of time working in Microware
BASIC and sharing my discoveries with him, who in turn shared them
through his column in 68K Micros. Since GFX for OSK was unavailable
at the time, anything I wrote used escape sequences. They were much
faster when used with PUT than either calling BGFX or a shell so I
recommend that approach to graphics programming in BASIC highly.
> It is nice to finally see a REAL BASIC compilor for OS-9! I take
> it you like it so far? While I do intend to learn C(am starting a
> programming AD course in college), I think CDL Basic would most
> likely be one of my first software buys when I go OSK. I can't see
> me getting a system without it. Is there any reason to use Basic09
> do you think with CDL. Are there still any advantages to it?
Its still early for me to make a call on this. I've figured out how to
do system calls and KWindows graphics with it. One needs system calls
to do essential programming chores like read the mouse and sleep. I've
also got a signal trap working in CDL BASIC but when I combine the signal
trap with attempts to read the mouse it fails. One needs a working signal
handler with mouse and keyboard reading to build a good main loop for a
program. If I get passed this hurdle, then I'd say CDL BASIC is the way
to go. I think one thing you would like is that CDL BASIC has some C-like
characteristics so its a good intermediate step on the learning curve
between BASIC09 and C.
> I'm glad you are getting the hang of it. We could sure use more
> OSK developers, and it will be cool to see CDL Basic attract some
> of them(you already have a product or three on the market don't
> you?). If you get a chance, let us know when you work out the
My only commercial venture in the CoCo days was DeskTamer which is
currently ported to the MM1 under MICROWARE BASIC. I'm now
playing with CDL BASIC in the hopes of moving DeskTamer to it so I
can release a version that would be quicker and not need support code
(i.e., RUNB)
Bests
---TedJaeger
-*-
92805 14-JUN 22:30 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92792)
From: TEDJAEGER To: NIMITZ
> Now all we need to do is get it passed through a System IV /System V and
> an MM/1 user and get the OSK version out!
I'll second that! Work on that Frank!
Bests
---TedJaeger
-*-
92806 14-JUN 22:46 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92792)
From: DSRTFOX To: NIMITZ
On 12-JUN 01:07 NIMITZ said to DSRTFOX
> Now all we need to do is get it passed through a System IV /System V
>and an MM/1 user and get the OSK version out!
Actually, that is being worked on at this minute!!
Francis (Frank) Swygert
Publisher, "the world of 68' micros" Magazine
`[1;31;47mRainbow V 1.11 for Delphi - Registered
-*-
92810 15-JUN 08:00 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92796)
From: JEJONES To: THETAURUS
> I'm the type who can really never get quite enough information.
> I wish they had a whole new book on Basic09 programming(I've got
> Hiiiiiigh Hopes...), since the B09 section of the OS-9 Manual
> still leaves some to be desired....
It's not new, but do you have a copy of Dale Puckett's *BASIC09
Tour Guide*?
Opinions herein are solely those of their respective authors.
-*-
92825 19-JUN 00:45 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92804)
From: JOELHEGBERG To: TEDJAEGER
Ted,
> Yes, that was me. Joel published code of mine in perhaps four issues.
Thanks again for those pieces of code! :)
> My only commercial venture in the CoCo days was DeskTamer which is
> currently ported to the MM1 under MICROWARE BASIC. I'm now
> playing with CDL BASIC in the hopes of moving DeskTamer to it so I
> can release a version that would be quicker and not need support code
> (i.e., RUNB)
Desktamer is quite a nice looking program, with lots of features. I
think I saw an early C version at WCP's booth at the fest. Either way
(C or CDL BASIC) it would be great to get rid of the RUNB support code
and get a little speedup as well.
-- Joel Mathew Hegberg
-*-
92826 19-JUN 00:46 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92806)
From: JOELHEGBERG To: DSRTFOX
> On 12-JUN 01:07 NIMITZ said to DSRTFOX
> > Now all we need to do is get it passed through a System IV /System V
> >and an MM/1 user and get the OSK version out!
>
> Actually, that is being worked on at this minute!!
Yes, I've seen parts of the OSK version and it looks great... It's
certainly a product that will be in demand for OSK users.
-- Joel Mathew Hegberg
-*-
92848 20-JUN 22:24 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92825)
From: TEDJAEGER To: JOELHEGBERG
> > Yes, that was me. Joel published code of mine in perhaps four issues.
>
> Thanks again for those pieces of code! :)
Hi Joel!
Well, I may have some CDL BASIC code for ya in the not too distant
future! Are you going to continue with your column in 68K Micros?
Hope you will have the time for such writing!
> Desktamer is quite a nice looking program, with lots of features. I
> think I saw an early C version at WCP's booth at the fest. Either way
> (C or CDL BASIC) it would be great to get rid of the RUNB support code
> and get a little speedup as well.
>
Thanks! I'm working on exactly that though my current impression is that
the change from Microware BASIC to CDL is greater than the change from
BASIC09 to Microware's BASIC for 68K. (Or maybe its just that learning
gets harder as I get older!)
Bests
---TedJaeger
-*-
92855 21-JUN 20:55 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92848)
From: NIMITZ To: TEDJAEGER
Ted, perhaps you would consider a few pieces for MOTD?? We're needing some
nice light technical to intermediate technical pieces.
David M. Graham
Executive Vice-President
OS-9 UG
-*-
92863 22-JUN 20:43 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92804)
From: THETAURUS To: TEDJAEGER
Desktamer is the one currently marketed by Blackhawk right? I
have heard good things about that. Haven't seen it only because
I'm on a Coco and not an MM/1.
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92864 22-JUN 20:43 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92810)
From: THETAURUS To: JEJONES
>>It's not new, but do you have a copy of Dale Puckett's
*BASIC09 Tour Guide*?<<
Yeah I have the tour guide, which is good. I also have the
Rainbow guide to Level II which actually has even more interesting
Basic09 code than the tour guide(it shows how to write the bare
bones of an editor!). Would be nice if there was something to dig
a little deeper. Luckily we do have the articles currently being
written by those with the experience.
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92883 24-JUN 14:00 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92855)
From: TEDJAEGER To: NIMITZ
> Ted, perhaps you would consider a few pieces for MOTD?? We're needing
> some nice light technical to intermediate technical pieces.
>
David,
I'm always eager to share stuff that I learn. I'd give it a shot if
I could write during the summer. Once school gets started its harder
for me. Maybe useful functions for CDL BASIC or doing system calls in
CDL BASIC would be a good topic?
Bests
---TedJaeger
-*-
92884 24-JUN 14:00 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92863)
From: TEDJAEGER To: THETAURUS
> Desktamer is the one currently marketed by Blackhawk right? I
> have heard good things about that. Haven't seen it only because
> I'm on a Coco and not an MM/1.
>
Actually, there is a CoCo version that was sold by MVSystems before
they got out of the CoCo business. The MM1 (commercial) version is
not yet complete, though there is a BASIC 68K version for KWindows
and the MM1.
Bests
---TedJaeger
-*-
92910 26-JUN 19:56 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92883)
From: THETAURUS To: TEDJAEGER
>>Maybe usefull functions for CDL BASIC or doing system calls in
CDL BASIC would be a good topic?<<
If it's basic related, you know I'll sure appreciate it Ted :-)
>Chris<
-*-
92913 26-JUN 20:35 General Information
RE: The World of 68 Micros(new issue) (Re: Msg 92883)
From: NIMITZ To: TEDJAEGER
Ted, that would be great. Thanks so much!!
David
-*-
End of Thread.
-*-
92762 7-JUN 23:27 General Information
Conference reminder
From: THETAURUS To: ALL
This is a reminder that this Monday June 12, at 10:00 PM eastern
time, we will be having our weekly 'OS-9 Late Night' conference.
The topic this week will be 'Let the Games Begin'. What are your
favorite Coco and OS-9 Games? Between what is available for
DECB,Level II, OSK, and CD-I, there are a lot out there! This also
makes a great forum thread(a similar one was started on the list).
I will also most likely post a reminder on Sunday, but if you
need to read the whole schedule it should be in the conference
banner area soon. Also, Mike Rowen will be posting it on the
internet. If you have a conference you want to host let me know,
and try me if there are any you want to see. No guarrentees but
I'll see what I can do. I am taking names for the Augest/September
schedule if you are interested in hosting your own topic(vendors,
user group/club members,sysops,developers etc..).
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92763 7-JUN 23:27 Users Group
Sourcebook User Form
From: THETAURUS To: ALL
At the end of this post will be the user entry form for the OS-9
Users' Group sourcebook. Initial response was great, but returns
have dropped off since. Please make it a point to fill it out and
return it to me(Thetaurus) so I can add your name to the database.
It takes not more than a couple minutes and couldn't be any
easier. You just need to fill it out and return it(email even :-)
), so please return this form with your name so we can keep the
response coming! Btw, in the upcoming MOTD we will have the BBS
entry form for sysops or users for that matter, to send in for
their bulletin board systems. I'll post the form here soon after.
The Industrial user form might also be in the next issue as well.
If not the next one, then the one after, tho it really doesn't
affect many of us here who are really personal users. If you know
any industrial users, please do make sure they see it when it
comes out.
________Form Coming...________
OS-9 Sourcebook Information Form
--------------------------------
Name:
---------------------------------------------------------------
Business:
-----------------------------------------------------------
Address:
------------------------------------------------------------
City: State: ZIP:
---------------- --------------- --------------------
Country: Telephone:( ) -
---------------- ---------------------------------
EMail Address:
-----------------------------------------------------
Signature: Date: 07 /06 /1995
------------------------------------ DD MM YY
Would you like information on
joining the OS-9 Users Group? o Already a Member! o Yes o No
Can this information be passed to OS-9 vendors? o Yes o No
Are you available to act as a volunteer for OS-9 o Yes o No
projects from time to time? This isn't a commitment.
Please indicate your area(s) of interest:
o OS-9/6809 o OS-9/68000 o OS-9000
o Programming o Hardware Other ________________________
You use OS-9 primarily for what purpose:
o personal use o industrial system o both
Please describe briefly your OS-9 computer system(s):
Please describe briefly your computer and OS-9 experience:
Please describe your OS-9 interests (things you would like to see the
UG do, or see in the MOTD), or list any other questions or comments:
-*-
92766 8-JUN 23:46 General Information
Trip Troubles
From: MODEL299 To: DSRTFOX
Sorry to hear about the troubles you had after the show. For our group the
problems were on the way to the show. I have a camper and we all load our
stuff in there. On the day I started out I had to make 3 stops to pick up
the rest of the gang. About 2 miles down the road after the first stop we
heard a loud BANG from the rear of the camper. We stopped and did not see
anything so we started out again. At the next guy's house we checked again
and saw a piece of tire tread missing from the inner tire of the right rear.
This cost about $186 and 90 minutes to fix. We picked up everyone and
started out from Omaha for the show. About 80 miles down the road I looked
at the instrument panel and thought "That really ought to be charging the
battery". When we got to DesMoines we asked directions to an auto parts
place. We replaced the alternator brushes for about $5 and a 30 minute
delay this time. This worked and we were on the road again. While going
down the road we occasionally smelled burnt rubber. At one of the gas
stops we saw that when the tire place swapped tires to put the older ones
on the outside they had not checked the clearance between the tires and the
fender. The inner tires were moved to the outside so they would be easier
to get to in case of trouble. This seemed to make sense because the new
tires would not likely have any problems. However the old inner tires are
a bit wider and scuffed the fenders when going over bumps. We got to the
show and I swapped the tires around the next afternoon. When that was fi
finished I took the camper out for a short test and to get supper. About
half way there I noticed that the speedometer was stuck at zero. I had a
busted cable. By this time it was dark so I got out a small 12 volt light
my wife bought for me. When I plugged it into the cigarette lighter there
was a small click and the dome light went out. BLOWN FUSE!!! Aafter this
no further repairs were attempted and the rest of the trip was problem free.
At times I was tempted to ask "WHAT NEXT??!!". But then I decided it might
be safer not to ask. You can consider this a letter to the editor and print
it if you wish. Take care and hope we both have better luck on the road.
Mark
-*-
92771 9-JUN 19:58 General Information
RE: Trip Troubles (Re: Msg 92766)
From: CLTUCKER To: MODEL299
Welcome to the motor home clan and all of its tribulations. For years we
have traveled to Alaska, Nova Scotia and Miami. Nothing but trouble, trouble.
hey should rename them Trouble Homes.(g)
-*-
92808 14-JUN 23:44 General Information
RE: Trip Troubles (Re: Msg 92771)
From: MODEL299 To: CLTUCKER
Perhapse they should. However, I save on pitstops when the wife is
traveling with me. Having a portable bathroom sure comes in handy!!!
-Mark-
-*-
End of Thread.
-*-
92767 9-JUN 00:33 Telecom (6809)
EMail Address
From: EARLCASPER To: ALL
What is my Delphi EMail address? - Earl
-*-
92768 9-JUN 01:04 Telecom (6809)
RE: EMail Address (Re: Msg 92767)
From: WA2EGP To: EARLCASPER
I would assume it is earlcasper@delphi.com.
-*-
92772 9-JUN 21:23 Telecom (6809)
RE: EMail Address (Re: Msg 92767)
From: ISC To: EARLCASPER
> What is my Delphi EMail address? - Earl
>
earlcasper@delphi.com
Bill
-*-
92797 12-JUN 23:14 Telecom (6809)
RE: EMail Address (Re: Msg 92767)
From: THETAURUS To: EARLCASPER
Earl your Delphi Internet address is 'Earlcasper@delphi.com'
without the single quotes of course. Within Delphi of course,
people can just email you at 'Earlcasper'.
See Ya!
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
End of Thread.
-*-
92773 10-JUN 03:49 Programmers Den
Help a Monk
From: REVWCP To: ALL
Dear Friends:
I am in the midst of working on a project and I need to know if it is
possible to write a program, preferably in Basic09, that can do the
following:
1. Determine if the CPU is a 6809 or 6309.
2. Determine that if the CPU is a 6309, is it running in
6809 emulation, Powerboosted Mode, or Native Mode.
Thank you for your help.
++++++++++++++++++++++++++++++++++++++++++++++++++++++
+: With all best wishes, ::::: When all else fails :+
+: Brother Jeremy, CSJW ::::::::::: ask a Monk :::::+
+: OS9 Users Group Treasurer ::::::::::::::::::::::::+
+::::::::::::::::::::::::::::::::::::::::::::::::::::+
+::: revwcp@delphi.com :::::::::: CIS - 76477,142 :::+
++++++++++++++++++++++++++++++++++++++++++++++++++++++
-*-
92776 10-JUN 21:46 Programmers Den
RE: Help a Monk (Re: Msg 92773)
From: RANDYKWILSON To: REVWCP
Br. Jeremy
Not too long ago, I gave Ricku a Basic09 routine that would determine
if the system was in normal (6809), PowerBoost (normal), PowerBoost (native)
or Nitros mode. If in normal mode, it could not determine between a 6809
and a 6309. Indeed, I can not think of a way to do that from Basic. The
only strategy I can think of would be to try a 6309 only instruction
(the 6809 will ignore it as illegal) to modify a testing value. This
would require direct access to machine instructions, assembler. Though,
I suppose such a thing could be made as a subroutine callable by basic.
If Rick does not have the routine handy, I might still have a copy I could
email.
Randy
-*-
92777 10-JUN 22:52 Programmers Den
RE: Help a Monk (Re: Msg 92776)
From: CLTUCKER To: RANDYKWILSON
Hi Randy. Have you released the updated version of SuperComm yet?(g)
cl
-*-
92779 11-JUN 00:27 Programmers Den
RE: Help a Monk (Re: Msg 92773)
From: COCOKIWI To: REVWCP
lets see!..the MD register is like the CC one in the 6809.....
bit - 0 returns 0 if in 6809 mode
1 if in native mode
bit - 1 returns 0 if FIRQ is normal
1 if same as IRQ ........these are WRITE bits
6 & 7 are error traps
read bits......if one could READ the BIT 0
it would tell one if you was in Native mode or not
we hope!<grin>......have to power up the system and see....Dennis
-*-
92780 11-JUN 11:06 Programmers Den
RE: Help a Monk (Re: Msg 92776)
From: REVWCP To: RANDYKWILSON
Dear Randy:
In reply to your message;
> Not too long ago, I gave Ricku a Basic09 routine that would determine
> if the system was in normal (6809), PowerBoost (normal), PowerBoost (native)
> or Nitros mode.
> If Rick does not have the routine handy, I might still have a copy I could
> email.
>
Rick had one of his famous system crashes last week. I missed it, as I was
not at the meeting that night, but I understand it quite spectacular. If
possible, please see if you still have a copy. As for assembler, this
could very well be the excuse that I have needed to get assembling (?). I
have both RMA and ASM so there is really no reason that I shouldn't try writing
something, other than having no idea where to start. But then I was never one
to let knowledge stand in the way of my making a decision....
++++++++++++++++++++++++++++++++++++++++++++++++++++++
+: With all best wishes, ::::: When all else fails :+
+: Brother Jeremy, CSJW ::::::::::: ask a Monk :::::+
+: OS9 Users Group Treasurer ::::::::::::::::::::::::+
+::::::::::::::::::::::::::::::::::::::::::::::::::::+
+::: revwcp@delphi.com :::::::::: CIS - 76477,142 :::+
++++++++++++++++++++++++++++++++++++++++++++++++++++++
-*-
92789 11-JUN 23:25 Programmers Den
RE: Help a Monk (Re: Msg 92780)
From: RANDYKWILSON To: REVWCP
Br. Jeremy,
Okay already. A "good idea of where to start" is now sitting in your mail
box. Code was written on my MM/1, and is, as is the norm lately, totally
untested.
Rick crashed *again*?? I think I shall rig up a coco with an airbag as
a present. :>
Randy
-*-
92791 12-JUN 01:07 Programmers Den
RE: Help a Monk (Re: Msg 92789)
From: NIMITZ To: RANDYKWILSON
Randy, perhaps you should make that DUAL airbags! ;)
-*-
92793 12-JUN 02:38 Programmers Den
RE: Help a Monk (Re: Msg 92789)
From: REVWCP To: RANDYKWILSON
Dear Randy:
> A "good idea of where to start" is now sitting in your mail
> box. Code was written on my MM/1, and is, as is the norm lately, totally
> untested.
>
Thank you have it safely downloaded and will be trying my hand with it
later on today,(as it is 1:37 am here in Wisconsin as I type this.) I'll
let you know how things work out.
++++++++++++++++++++++++++++++++++++++++++++++++++++++
+: With all best wishes, ::::: When all else fails :+
+: Brother Jeremy, CSJW ::::::::::: ask a Monk :::::+
+: OS9 Users Group Treasurer ::::::::::::::::::::::::+
+::::::::::::::::::::::::::::::::::::::::::::::::::::+
+::: revwcp@delphi.com :::::::::: CIS - 76477,142 :::+
++++++++++++++++++++++++++++++++++++++++++++++++++++++
-*-
92827 19-JUN 00:46 Programmers Den
RE: Help a Monk (Re: Msg 92789)
From: JOELHEGBERG To: RANDYKWILSON
> Rick crashed *again*?? I think I shall rig up a coco with an airbag
> as a present. :>
Heh heh, good idea, Randy! Rick's coco's can do a lot more than any
ordinary CoCo... the only problem is it can only do for a random amount
of time before crashing. <g> (Just teasin' you, Rick, since I've been
too busy to tease you from my 68'Micros column! ;)
-- Joel.
-*-
End of Thread.
-*-
92778 10-JUN 23:28 Applications (6809)
D.L. LOGO
From: MANTONY To: ALL
I've been looking for advice on running D.L. Logo under OS9 LV2. Searched
all my past Rainbows and all Delphi Topics for info on possible patches
with no success. The only advice I've found is in 2 past RAinbows
which state that D.L. LOGO will; run properly under LV2 if started in
a VDG window. I've had only particial success doing this. I recall
that COCOPro while they were still in business used to sell used copies
of D. L. LOGO with the proper patches to run under LV2. The COCOPro ad
always noted that the patches were necessary to run this program properly
under LV2. Does anyone know what those patches are?
-*-
92795 12-JUN 23:13 Applications (6809)
RE: D.L. LOGO (Re: Msg 92778)
From: KSCALES To: MANTONY
> I've been looking for advice on running D.L. Logo under OS9 LV2.
> Searched all my past Rainbows and all Delphi Topics for info on possible
> patches with no success. The only advice I've found is in 2 past
> RAinbows which state that D.L. LOGO will; run properly under LV2 if
> started in a VDG window. I've had only particial success doing this. I
> recall that COCOPro while they were still in business used to sell used
> copies of D. L. LOGO with the proper patches to run under LV2. The
> COCOPro ad always noted that the patches were necessary to run this
> program properly under LV2. Does anyone know what those patches are?
There may be a message in the forum here from a couple of years back
covering what you need to do. I don't know the most efficient way of
searching for it, but something like:
dir from kscales subject logo
might do it. (Before sending this, I logged in and checked... the above
worked, and listed 4 messages. Check 21841, 72314, 81858, and 81967.)
You're half-way there by using the VDG screen. The
other trick is that DL Logo ONLY UNDERSTANDS COMMANDS IN CAPITAL LETTERS.
So, you can either press shift whenever typing your commands, or toggle
caps-lock on (lessee, I think that's Ctrl-zero under L2???), or possibly
type "tmode upc" (???) on the VDG window before executing Logo.
Otherwise, I don't think any patches are required. I found it advantageous
to patch the Logo module to increase the default memory size, since L2
leaves a larger available area for the data area than L1 did.
Sorry about all of the "???" above, but my Level 2 is getting awfully rusty
since the MM/1 moved in.
Good luck... / Ken
--------------------------------------------------------------------------
Ken Scales Delphi:KSCALES Internet:kscales@delphi.com CIS:74646,2237
-*-
92807 14-JUN 23:04 Applications (6809)
RE: D.L. LOGO (Re: Msg 92795)
From: MANTONY To: KSCALES
I appreciate any info no matter how sketchy. This is my third month on
Delphi and I'm still stumbling around Delphi trying to get past info-so
I appreciate the pointers.
-*-
92840 19-JUN 20:49 Applications (6809)
RE: D.L. LOGO (Re: Msg 92795)
From: DBREEDING To: KSCALES
> You're half-way there by using the VDG screen. The
> other trick is that DL Logo ONLY UNDERSTANDS COMMANDS IN CAPITAL LETTERS.
> So, you can either press shift whenever typing your commands, or toggle
> caps-lock on (lessee, I think that's Ctrl-zero under L2???), or possibly
> type "tmode upc" (???) on the VDG window before executing Logo.
> Sorry about all of the "???" above, but my Level 2 is getting awfully
> rusty since the MM/1 moved in.
heh-heh.. It doesn't take long for some of that stuff to get a little
foggy, does it? I still have my coco hooked up, go back to it occasionally.
It's like meeting an old friend, but some of the stuff is beginning to
go. The worst problem I have is the keyboard and the fact that most of
the parameters on the coco don't take the "-" before them <G>
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92841 19-JUN 20:49 Applications (6809)
RE: D.L. LOGO (Re: Msg 92807)
From: DBREEDING To: MANTONY
> I appreciate any info no matter how sketchy. This is my third month on
> Delphi and I'm still stumbling around Delphi trying to get past info-so
> I appreciate the pointers.
If you run into problems, just ask. One thing you'll find out about this
group is that everyone is more than happy to help. I've asked a few
questions and been almost swamped by answers at times.
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92842 19-JUN 22:22 Applications (6809)
RE: D.L. LOGO (Re: Msg 92841)
From: MANTONY To: DBREEDING
Thank you. Will do.
-*-
92865 22-JUN 20:43 Applications (6809)
RE: D.L. LOGO (Re: Msg 92807)
From: THETAURUS To: MANTONY
>>I appreciate any info no matter how sketchy<<
Don't worry, we love getting new 'faces' in here. I'm still
constantly whining for help so don't worry, no one will tire of
your questions :-)
Of course you should consider signing up to a local or national
user group and subscribe to one(or more) of the publications out
there(there are a few). They are a definate help.
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
End of Thread.
-*-
92786 11-JUN 16:52 General Information
OS-9 Late Night Schedule(fixed)
From: THETAURUS To: ALL
OS-9 Late Night
Conference Schedual
For June AND July
Date Time(EST) Topic
June 5, 1995 10:00 PM Open Forum
June 12, 1995 10:00 PM Let the Games Begin!
What are your favorite OS-9 and Coco based games? There
have been many to come along over the years, not even
including what is available for CD-I! What new games would
be nice to see? Gaming enthusiasts will want to be onhand
for this :-)
June 19, 1995 10:00 PM Open Forum
June 26, 1995 10:00 PM Open Forum
July 3, 1995 10:00 PM Open Forum
July 10, 1995 10:00 PM Beginners Night!
How do I set up OS-9 correctly? What modules should I
patch/leave alone? What apps should I buy, where can I get
them? Why do I keep getting this (#'%("!(%&! error 216
message!? Find out all this and more on Beginners' night!
July 17, 1995 10:00 PM Open Forum
July 24, 1995 10:00 PM OS-9 User's Group
Discussion
Mike Rowen, the Vice-President of the OS-9 Users' Group
representing the Level's I and II users of OS-9, will be on
hand. He is going to cover ideas for upcoming projects to
maintain activity for those using OS-9 on a 6809 or
compatible based machine(Coco 3,Dragon, etc..). If you are a
Level I or II user you will want to attend and give Mike any
feedback you may have, or drop him a line and let him know
if you are available to to get involved in any future
projects.
July 31, 1995 10:00 PM Open Forum
-*-
92787 11-JUN 18:10 General Information
Re your IN Post
From: MRUPGRADE To: ARTFLEXSER (NR)
I'm adding the Internet reply here, for what it's worth. Primarily for
theh benefit of others ofcourse. I (grin) thiink you've seen it by now.
RE> Until your post I've always read "& Country" Kinda like
Kountry Kitchen....
Hi Art,
A good point. And I've at least suspected many read the Mid Iowa
and ignored the & Country. Course now,, little did I suspect some
would read it as like,, (grin) "& out into the corn fields too".
Yet I know there could be a better discriptive Club name. But then
some of the members balked at the mere adding of "& Country to our
local group". The best I could get them to accept was a motion to
try it for a year,,, and they (grin) forgot, thus any "change back"
was forgotten. Then too, at times we've had more members in either
AZ or WA then in Iowa. And they all can vote on any major change.
And perhaps too, it my despise for pretensiousness. Many like
yourself make no bones, about who you are. A heck-uva good
programmer (perhaps, an understatement at that) who sells a heck-uva
greal DOS enhancement. On the other hand I've recieved 5+ page
flyers from McBigTech, Inc type fellows. And there name can't be
found anywhere in those 5+ pages? I guess I'm suppose to figure
it's such a huge corperation, that the guy's name,,, who (grin) sits
at the end of the kitchen table opening the mail,, isn't
applicable. Baloney!
So perhaps I lean too far the other way. What the hey,, we're
just a lil' ol' group of guys and gals who for several years now,
are among, if not "the": largest in CoCo reachouts in America and
Canada.
"Mid Iowa & Country CoCo" (smile) (country as in all over the US)
Thanks for the reply,, I guess the secret is out.
Signed
Regional director for the Midwestern district of the Americas
group for Color Computers International. (and mail clerk)
Terry Simons
-*-
92798 12-JUN 23:14 Users Group
Sourcebook/other services
From: THETAURUS To: ALL
I was wondering if there is anyone here that user CIS and Genie
or any other commercial service that supports OS-9, that could
post the Sourcebook entry forms in their respective forums? I'm
not a member of Genie,Cis or Channel 1 or any of them that might
support OS-9. I completely forgot about this, and don't want to
leave the other users out at all, so any help will be appreciated!
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92839 19-JUN 20:49 Users Group
RE: Sourcebook/other services (Re: Msg 92798)
From: DBREEDING To: THETAURUS
> I was wondering if there is anyone here that user CIS and Genie
> or any other commercial service that supports OS-9, that could
> post the Sourcebook entry forms in their respective forums?
I can put it onto CI$. How can they return it to you? Do you want to
provide a snailmail address? I wonder, would CI$ squawk at having
your Delphi internet address on it, or do you prefer not to get it in
email?
-- David Breeding --
CompuServe : 72330,2051 Delphi : DBREEDING
*** Composed with InfoXpress/OSK Vr. 1.02 & VED Vr. 2.4.0 ***
-*-
92869 22-JUN 20:44 Users Group
RE: Sourcebook/other services (Re: Msg 92839)
From: THETAURUS To: DBREEDING
>>I can put it onto CI$. How can they return it to you?<<
Oh yeah, I don't think the form has the return addresses on it.
They can either email it to me at: Thetaurus@Delphi.com or send it
to the UG's Snail Mail address at the end of this message.
>>I wonder, would CI$ squawk at having your Delphi internet
address on it...<<
No, that won't bother them. If they have internet access, they
are gonna get used to seeing a million other internet addresses.
Even if they did(and they won't), they still need some activity in
the OS-9 sig anyway. I guess it's been rather quiet there the last
couple years(hope the price reduction brings more OS-9 and Coco
types out of the woodwork for those on CIS).
Snail mail return address below:
The OS-9 Users' Group Inc.
6158 West 63rd Street
Suite 109
Chicago, Il. 60638
USA
See Ya and thanks David!
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
End of Thread.
-*-
92803 14-JUN 22:08 General Informtion THETAURUS To: ALL
This is a quick reminder that this coming Monday night at 10:00
PM Eastern time will be our weekly 'OS-9 Late Night' conference.
This week we will be having an Open Forum, so anything and
everything is up for discussion. Please try to make it if you can,
and help keep these conferences interesting. It's a bit quiet as
of late... Again, don't hesitate to stop by as everything is up
for discussion and NOTHING is SACRED!
Ahem, excuse me, Brother Jeremy would like to have a word with
me outside... ;-)
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92809 15-JUN 00:33 Telecom (6809)
28.8 modems
From: EARLCASPER To: ALL
Is there a baud rate between 57.6 and 115.2 that 28.8 modems can talk
with their computers? - Earl
-*-
92811 16-JUN 21:03 Telecom (6809)
Baud
From: WILLIAMSON68 To: ALL
I'm really having a problem connecting to delphi @ 2400 baud. I access thru
sprintnet on a 512k 6809 machine-avatex 2400 modem. the problem is that DELPHI
will only let me connect at 1200 baud using the @ D which as I understand
should be the connect for 2400 baud. However, the HS light on the modem is not
lit. I know the modem is allright, at least everything works as it should when
I go online under decb. Any thoughts would be appreciated. Thanks. WILLIAMSON68
-*-
92818 17-JUN 12:18 Telecom (6809)
RE: Baud (Re: Msg 92811)
From: TEDJAEGER To: WILLIAMSON68
> I'm really having a problem connecting to delphi @ 2400 baud. I access
> thru sprintnet on a 512k 6809 machine-avatex 2400 modem. the problem is
> that DELPHI
> will only let me connect at 1200 baud using the @ D which as I understand
> should be the connect for 2400 baud. However, the HS light on the modem is
> not
> lit. I know the modem is allright, at least everything works as it should
> when
> I go online under decb. Any thoughts would be appreciated. Thanks.
I used to use that modem when I was CoCoing so I know it can be done. Do
you have your descriptor (/t2) set to 2400 baud? I am assuming you are
using a hardware serial card (like the Tandy serial pak), right?
Bests
---TedJaeger
-*-
92843 19-JUN 22:23 Telecom (6809)
RE: Baud (Re: Msg 92818)
From: WILLIAMSON68 To: TEDJAEGER
I'm running supercomm v 2.2 which should configure the rs232 @ whatever baud
I set the emulator for (I think?). At least the modem still shows a hs
indicator when I receive the sprintnet signal. It simply refuses to connect.
The curious
thing is that when I sign on, I have to use the 2400 baud sign on @ &UPCASE D
when I make connect @ 1200 baud. Any ideas??
-*-
92849 20-JUN 22:24 Telecom (6809)
RE: Baud (Re: Msg 92843)
From: TEDJAEGER To: WILLIAMSON68
> I'm running supercomm v 2.2 which should configure the rs232 @ whatever
> baud I set the emulator for (I think?). At least the modem still shows a
> hs indicator when I receive the sprintnet signal. It simply refuses to
> connect. The curious
> thing is that when I sign on, I have to use the 2400 baud sign on @
> &UPCASE D when I make connect @ 1200 baud. Any ideas??
That sounds weird to me, unless your calling a sprintnet node that only
supports 1200 baud, but I figure they dont exist anymore, right?
Bests
---TedJaeger
-*-
92874 23-JUN 00:08 Telecom (6809)
RE: Baud (Re: Msg 92849)
From: WILLIAMSON68 To: TEDJAEGER
It was kinda wierd to me also, however, I've connected thru tymnet & every-
thing runs perfect! Hard to say where the problem is but i'm rather sure it's
not on my end now. Who knows? Anyway, thanks for the reply. Dan
-*-
End of Thread.
-*-
92812 16-JUN 21:06 Games & Graphics
LII stdpats
From: DOMM To: ALL
I wonder if someone could point me in the right direction.
What I'd like to be able to do is alter the patterns in MVCanvas. I imagine
these are the stdpats_xx, etc..
Can someone tell me what the best way to do this with some program from
the database. So far I'm toying with "ICE" but keep getting an error
situation. I believe (?) ICE was written around '87. Is there a newer
better way or should I just hang in there until I get this working?
Thanks.
---Dom
-*-
92813 16-JUN 22:47 General Information
Sourcebook User Form
From: TEDJAEGER To: THETAURUS
Completed my Sourcebook Form and then realized I dont know where to snail mail
the thing. Could you provide an address?
Bests
---TedJaeger
-*-
92866 22-JUN 20:43 General Information
RE: Sourcebook User Form (Re: Msg 92813)
From: THETAURUS To: TEDJAEGER
>>Completed my Sourcebook Form and then realized I don't know
where to snail mail the thing. Could you provide an address?<<
I can do that. :-)
Btw, sorry about the late replies. I had a smaller batch of
messages almost completed when my system froze(courtesy of my
Burke and Burke controller which just doesn't seem happy in the
Multi-Pak). Anyway I lost the whole file, and started doing the
replies again now. My system is so sensitive as of late(actually
has been for quite some time but is getting worse again), and
keeps crashing so it is hard to try running anything for an
extended period without having it freeze up. I am doing constant
saves with VED here this time<G>.
Anyway here comes the snail mail address to the OS-9 Users'
Group:
The OS-9 Users' Group Inc.
6158 West 63rd Street
Suite 109
Chicago, Il. 60638
USA
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
End of Thread.
-*-
92814 17-JUN 00:24 General Information
I'm back
From: NEWKID To: ALL
Well after a brief mishap with my 8CM515 monitor, that is going to the shop,
I'm back on-line again. And for all the older CoCoist out there I'm using
the old vintage 1986 Magnavox Amber screen monitor. One of the monitors
used when the old CoCo 1 was set up to rum with 80 columns. Yep, I go way
back.
I need to know a few things.
1) Do we still have any Vendors in the CoCo Community ( esp OS9 ) ?
2) What good mags are still printing ( stopped reading after Rainbow faded) ?
3) Is Conect ( Rick Ulland ) still in business ? We have some unfinished.
Thanks for assistance.
James Mc Daniel
-*-
92817 17-JUN 11:02 General Information
RE: I'm back (Re: Msg 92814)
From: JEJONES To: NEWKID
> I need to know a few things.
OK. We'll do what we can, and I'm sure others will fill in stuff I forget.
> 1) Do we still have any Vendors in the CoCo Community ( esp OS9 ) ?
You bet. CoNect, Northern Xposure, Chris Dekker, FARNA Systems come
immediately to mind; if I had a magazine in hand I'd have a longer list,
which leads up to...
> 2) What good mags are still printing ( stopped reading after Rainbow
> faded) ?
Frank Swygert's *The World of 68 Micros* is still around; it goes almost
without saying that you should give serious thought to joining appropriate
users groups.
> 3) Is Conect ( Rick Ulland ) still in business ?
Yes, he is.
Opinions herein are solely those of their respective authors.
-*-
End of Thread.
-*-
92815 17-JUN 07:49 General Information
DISTO PRODUCTS
From: RONMAGOO To: ALL
Dose anyone know if Tony (Disto o Products) has a Delphi username or an
internet address ??
-*-
92816 17-JUN 10:47 General Information
RE: DISTO PRODUCTS (Re: Msg 92815)
From: DISTO To: RONMAGOO
Yea, I think his Delphi name is DISTO. I got you package the other day,
but I didn't have any time to look at it yet. -Tony.
-*-
92819 17-JUN 13:35 General Information
RE: DISTO PRODUCTS (Re: Msg 92816)
From: JOHNBAER To: DISTO
(hehe) - I like your style Tony <g>.
John -
-*-
92832 19-JUN 06:53 General Information
RE: DISTO PRODUCTS (Re: Msg 92816)
From: RONMAGOO To: DISTO
Thanks for the reply Tony. I am releived to know you received it. I will be
looking forward to your next message.
-= RON =-
-*-
End of Thread.
-*-
92820 18-JUN 06:39 General Information
Scaleing
From: LARRYOLSON To: BOISY
Boisy,
In doing all this thinking about scaleing affecting the GET/PUT function,
it finally hit me that this was the cause of the problem I had with the
screen print program I wrote. The problem I ran into was that sometimes the
program would print all the screen and sometimes it would only print one half
of the screen. I tried every syscall in cgfx.l but I could not find out any
information that would tell why sometimes I would get full screen printouts,
and sometimes only half screen printouts.
I realize now that the problem was that some of the screens were scaled
and some were not.
I really hate to keep throwing these things at you, but I don't know who
else to ask, so here I go again....
What can I do to determine whether a screen is scaled or not ?
p.s. I still have not had any luck in decoding that file you sent, so
I can't tell if it corrects the problem or not.
larry
-*-
92852 21-JUN 01:12 General Information
RE: Scaleing (Re: Msg 92820)
From: CHYDE To: LARRYOLSON
I'm not sure about a syscall to tell whether scaling is on or not, but you
can use ScaleSW() (in Mike Sweet's cgfx lib). You might try looking through
the Window section of the Level 2 manuals.
Chris
-*-
92853 21-JUN 03:39 General Information
RE: Scaleing (Re: Msg 92852)
From: LARRYOLSON To: CHYDE
> I'm not sure about a syscall to tell whether scaling is on or not, but
> you can use ScaleSW() (in Mike Sweet's cgfx lib). You might try looking
> through the Window section of the Level 2 manuals.
Chris
Yes I know about the ScaleSw() function, what I need is a way to tell
if a particular window has scaling on or off. For an example I can start
up and display a picture using Gifshow. Gifshow opens up a window using
/w6, I then run the screen print program on /w6, and it works just fine.
I then run my Makpal program, it opens up a window on /w7, I then run the
screen print program on /w7, but only half of the screen(horizontally) is
printed out. Using all the available calls,(_gs_winfo, _gs_scsz, _gs_styp
and so on), I get reports of identical screen sizes for both /w6 & /w7,
both say that they are 320 pixels wide. Just lately I found out that
scaling is turned on by default, and if you don't want it you must shut it
off, well in the Makpal program I didn't shut off scaling, so even though
it reports itself as a 320 pixel wide screen it is acutally 640 pixels
wide. While apparently Gifshow turns scaling off, so its 320 wide screen
is actually 320 pixels wide.
Now my dumb screen print program gets the window info and is told
that /w7 is 320 pixels wide, so it only gets 320 pixels horizontally,
ignoring the second half of the screen.
As a klugg fix I added an option on the command line so when you print
out a screen but only get half of it then try again with the -f option
enabled, which will double the pixel count and print out the entire screen,
but it would be a whole lot better if the program could find out whether
the screen is using scaling or not and adjust itself accordingly.
Please excuse the length of this reply, I tend to ramble.
larry
-*-
92857 21-JUN 20:56 General Information
RE: Scaleing (Re: Msg 92853)
From: NIMITZ To: LARRYOLSON
Larry, this is going to be hairy for awhile - but if we don't want a lot of
broken programs out there, we'd better try something like turning scaling
off at the start of all programs, in order to keep track of what it is.
Darn it! Hopefully we can get such a status call in RSN.
David
-*-
92858 21-JUN 22:51 General Information
RE: Scaleing (Re: Msg 92852)
From: WDTV5 To: LARRYOLSON
There is not to my limited knowledge, a call that returns the status of
aleing switch byte. To be safe, just command it in the mode you want
it in with the appropriate esc codes, or as suggested, use Mikes cgfx.l to
make the command call. That is not to say that an enterprising programmer,
with enough info in hand, couldn't write a util to do that, rather along
the lines of xmode I would imagine. Its a system call that really does
need adding to the screen driver, probably grfdrv as I believe thats
where the scaling takes place. Check with Alan Dekok, Colin McKay etc
about it if you're using nitros9, otherwise there may be enough clues in
Kevins Inside Os9 L 2 to make it work.
Cheers Larry, Gene
-*-
92859 22-JUN 03:39 General Information
RE: Scaleing (Re: Msg 92857)
From: LARRYOLSON To: NIMITZ
> Larry, this is going to be hairy for awhile - but if we don't want a lot
> of broken programs out there, we'd better try something like turning
> scaling off at the start of all programs, in order to keep track of what
> it is. Darn it! Hopefully we can get such a status call in RSN.
David
I don't know if there would be alot of broken programs out there, as
far as I know, I'm the only one that has run into this problem <g>.
In regards to a status call, you probably don't need to go that far,
there 10 reserved shorts in _gs_winfo, couldn't one of them be w_scal,
with 0 = scaleing off, 1= scaleing on. I know that the scaleing status
is being kept someplace in Kwindows, it just needs to be a little more
available. <g>
If I had to choose though, an interruptable ss_play tops my list, say
you have some sound or music playing at the opening screen of a program
with a click button or press key to start the program displayed, the user
is going to expect the program to start when the button or key is pressed
and not have to wait till the music ends. This is just one example, I can
think of more examples where you might want to stop ss_play, but you get
the idea. <g> In the SCC68070 manual, in the DMA section, it talks of a
software abort flag, which sounds like what is needed, but I don't know
if there would be problems with doing the same thing with the 68340.
larry
-*-
92875 23-JUN 01:23 General Information
RE: Scaleing (Re: Msg 92859)
From: NIMITZ To: LARRYOLSON
Good ideas, and I think Eddie Kuns is working on those sound ideas now.
DAvid
-*-
End of Thread.
-*-
92824 18-JUN 14:23 General Information
Worth Mention....
From: MRUPGRADE To: ALL
Worth mention in passing....
Information taken from the Des Moines Register.
(Des Moines, IA)
John Atanasoff constructed his first working computer in the
basement of the Physics building of what is now Iowa State
University. IN THE LATE 1930's. Though it wasn't until 1973 after
patent infringement suits, that a federal court ruled his research;
"was the source for the ideas of modern computers". Scientists have
called him the "Thomas Edison of the electronc digitial
computer".
John A Atanasoff at his home in New Market MD, died of a stroke June
15, 1995. He was 91 years old.
Sendors comentary:
I had never heard his name before. It seems so odd I'd never heard
his name before. Odd,,, because we all on our CoCo's, our Amiga's,
the PC, MAC, & compatibles, owe a debt of grattitude to this fellow.
So many times we feel as though, just one person can not possible make
a difference. John Atanasoff certainly did that.
Terry Simons, UPGRADE Disk Magazine (for the CoCo) Editor
-*-
92833 19-JUN 13:44 General Information
CONFERENCE REMINDER
From: MROWEN01 To: ALL
Remember! Tonight is OS-9 Late Night in the Delphi conference area!
It's tonight (19 June 95) at 10:00PM ET! Drop by and chat!
Mike Rowen
VP OS-9/6809
OS-9 Users Group
mrowen01@delphi.com
-*-
92846 20-JUN 06:58 General Information
Forum messages
From: MROWEN01 To: ALL
Is there any way to pull text in from your workspace and post it here?
Thanks
-Mike Rowen
-*-
92847 20-JUN 10:45 General Information
RE: Forum messages (Re: Msg 92846)
From: JIMDIXON To: MROWEN01
Mike:
To send a file from your workspace as a message, simply type
ADD filename or REPLY filename, depending on whether your replying or
starting a new thread. To include the text in a message in progress,
you have to use the editor, and I'm rusty enough at that not to attempt
the details. :)
James Dixon
-*-
92850 20-JUN 23:33 General Information
RE: Forum messages (Re: Msg 92847)
From: MROWEN01 To: JIMDIXON
Thanks! That's great! Ask and ye shall receive!
Mike Rowen
-*-
End of Thread.
-*-
92851 20-JUN 23:36 General Information
New Conference being formed on the IRC
From: MROWEN01 To: ALL
NOTICE:
I am planning to begin an OS-9 IRC conference for all those interested.
Details will be forwarded in the near future. I still need some input from
those interested in this conference :
1. What day is best for everyone?
2. What time is best for everyone?
3. Who will work with me to moderate this conference?
4. What specific topics would you like to discuss?
Please send your responses to mrowen01@delphi.com. Thanks!
Mike Rowen
VP OS-9/6809
OS-9 Users Group
-*-
92856 21-JUN 20:56 General Information
RE: New Conference being formed on the I (Re: Msg 92851)
From: NIMITZ To: MROWEN01
Mike, in regards to this, I need some help putting together an IRC
conference for DODMA - many attendees are not Delphi users, thus my need for
IRC - can you enlighten me on the techniques? (I'd like to collect your
messages for an article for MOTD, OK?)
David
-*-
92861 22-JUN 11:00 General Information
RE: New Conference being formed on the I (Re: Msg 92856)
From: MROWEN01 To: NIMITZ
Hi David,
Your welcome to collect messages. I don't know that there are any
specific techniques I can describe. Maybe you could be more specific. The
ICR is very similar to the conference utility on Delphi. Your best bet is
to come up with a unique name for the channe. (DODMA come to mind!) publish
the channel name for all those who want to join. If privacy is an issue or
you wish to keep the rest of the world from poping in to ask what on earth
DODMA is, you can set up a channel that only people invited in can get to.
I'll leave it at that until you come up with some specific questions. I hope
I can help you out.
Mike Rowen
-*-
92876 23-JUN 01:24 General Information
RE: New Conference being formed on the I (Re: Msg 92861)
From: NIMITZ To: MROWEN01
Mike, thanks for the reply, I'll set a schedule ASAP and go for a conference
on delphi. What address would a person telnet to to attend from outside?
-*-
92879 24-JUN 01:26 General Information
RE: New Conference being formed on the I (Re: Msg 92851)
From: JOELHEGBERG To: MROWEN01
Mike,
> 1. What day is best for everyone?
Most any night is fine for me if advance notice is given.
> 2. What time is best for everyone?
I like 10 pm eastern.
> 3. Who will work with me to moderate this conference?
I haven't used IRC before, but I'll help moderate if you like.
-- Joel Mathew Hegberg
-*-
End of Thread.
-*-
92854 21-JUN 20:34 General Information
NEWS FLASH
From: HAWKSOFT To: ALL
NEWS FLASH! NEWS FLASH! NEWS FLASH! NEWS FLASH! NEWS FLASH! NEWS FLASH!
Due to an impending career change (YAY!!!!) HAWKSoft will be moving it's base
of operations to the South Bend Indiana area. The move will cause major service
disruptions, so, We ask all to be patient and tolerant. Things will really be
crazy around here for a while!! We'll post an address change when the new one
is available, but, the old address will still be valid (but, probably realllly
slow!). The Delphi and Internet addresses will not change (tho response time
may slow some).
Thanks in advance for your support!! <g>
Chris
:-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-:
Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM
******************< Uploaded w/ InfoXpress vr. 1.02.00 >******************
-*-
92860 22-JUN 04:20 General Information
RE: NEWS FLASH (Re: Msg 92854)
From: COCOKIWI To: HAWKSOFT
HMMMM! Glad i did not ship the package yet<grin> I could not find the
envelope with the address on it!....ZAP the new address to me when you get
back to normal???......via Email...and package will be sent!..grats on new
job....more $$$..<G.> ....Dennis
-*-
92872 22-JUN 21:55 General Information
RE: NEWS FLASH (Re: Msg 92854)
From: JOHNBAER To: HAWKSOFT
Hello Chris,
> Due to an impending career change (YAY!!!!)
Well congratulations and best of luck with the move and new job!
I'll be looking for that new address also :)
John -
-*-
92880 24-JUN 01:26 General Information
RE: NEWS FLASH (Re: Msg 92854)
From: JOELHEGBERG To: HAWKSOFT
Chris,
> Due to an impending career change (YAY!!!!) HAWKSoft will be moving it's
Congratulations!!! I'm happy to hear that! Care to say which company?
-- Joel.
-*-
92893 25-JUN 13:36 General Information
RE: NEWS FLASH (Re: Msg 92854)
From: LUCKYONE To: HAWKSOFT
Hi Chris,
I am happy to hear about your new job. Somebody mentioned at the Chi. Area
OS-9 meeting on Thur. (6/22). I wish you great success and the next time
I see you I hope to hear more about what you are doing.
Howard
-*-
92899 25-JUN 21:06 General Information
RE: NEWS FLASH (Re: Msg 92880)
From: HAWKSOFT To: JOELHEGBERG
> Chris,
>
> > Due to an impending career change (YAY!!!!) HAWKSoft will be moving
> it's
> Congratulations!!! I'm happy to hear that! Care to say which company?
>
> -- Joel.
>
Thanks Joel!!!
The Company is Syscon Intl. This sounds like it will be more fun than
Microware (and HAWKSoft can remain in business). The only "downside" is that
my "boss's" name will be Mr. Kreider. <BIG G>
Chris
:-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-:
Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM
******************< Uploaded w/ InfoXpress vr. 1.02.00 >******************
-*-
92918 27-JUN 21:03 General Information
RE: NEWS FLASH (Re: Msg 92893)
From: HAWKSOFT To: LUCKYONE
> Hi Chris,
>
> I am happy to hear about your new job. Somebody mentioned at the Chi.
> Area OS-9 meeting on Thur. (6/22). I wish you great success and the next
> time I see you I hope to hear more about what you are doing.
>
> Howard
>
Thanks Howard!!! <grrrrrr!!!>
Hope to be at the next Glenside meeting (the 13th???), but, I'm not
sure. I have to be at my desk in South Bend on the 17th! Whew!!!!
Chris
:-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-:
Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM
******************< Uploaded w/ InfoXpress vr. 1.02.00 >******************
-*-
92922 27-JUN 23:14 General Information
RE: NEWS FLASH (Re: Msg 92899)
From: JOELHEGBERG To: HAWKSOFT
Chris,
> The Company is Syscon Intl. This sounds like it will be more fun than
Awesome! I'm very excited for you!
> that my "boss's" name will be Mr. Kreider. <BIG G>
I'm so sorry for you... I hear he's a real slave-driver... <G>
-- Joel.
-*-
92923 28-JUN 22:01 General Information
RE: NEWS FLASH (Re: Msg 92922)
From: HAWKSOFT To: JOELHEGBERG
> Chris,
>
> > The Company is Syscon Intl. This sounds like it will be more fun than
>
> Awesome! I'm very excited for you!
>
Thanks!! Me toooooo!!!!!!! This is my kind of programming!!!
> > that my "boss's" name will be Mr. Kreider. <BIG G>
>
> I'm so sorry for you... I hear he's a real slave-driver... <G>
>
> -- Joel.
>
Hi Joel!!!
Yeah, if he gives me a hard time or makes me call him MISTER Kreider, I'll
tell Debi on him <VBG>!!!
Chris
:-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-:
Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM
******************< Uploaded w/ InfoXpress vr. 1.02.00 >******************
-*-
End of Thread.
-*-
92862 22-JUN 20:08 General Information
OS-9000 help
From: JOHNREED To: ALL
OK, OS-9000 users. New Guy here. A few questions.
OS-9000 us up and running on my "486DX4/100", and I am slowly getting
it to obey. I have some OS-9 experience, COCO I,II,III and
OS-9/68000 on my MM/1a, so I am not completely lost, but there
are a couple little things I still can't get to work.
1. Comm ports. I can use T1 and T2. Even had STERM talking
to CIS when I had the (internal) modem on T2 (COM2). Then I moved the
modem to T4 (COM4). T2 is now a simple serial port. T2 still
works, I can plug it into an external modem or null-modem to the
MM/1, but I cannot get OS-9000 to talk to T4. Messydos & Windoze
and even OS/2 can find that modem, but OS-9000 cannot. COM2 and
COM4 are BOTH using IRQ3, but I am not trying to use them at the
same time.
2. Printer. I am using LPT1. The address of the port seems right
accord to the BIOS and the information with the OS-9000 system.
It even makes the lights blink and puts the Deskjet through its
INIT routine when I load and init p.lpt1. When I try to print
something, the lights blink on the printer and the system hangs.
LPT1 works fine with the other operating systems, of course.
Current method of printing from OS-9000 is to pass it via null
modem to the MM/1.
3. Disk formats. No big deal here, but I sure can't get the MM/1
and the OS-9000 system to agree on what a "universal disk" is. I
CAN get them both to read and write on a High density messydos
disk, so I use that for transfers.
4. Graphics. Anything available to get OS-9000 to speak to the
Trident 94xx VGA card in this beast? I need a CGFX_VGA.L lib
(grin).
Suggestions welcome.
John Wainwright (johnreed@delphi.com 72517.676@compuserve.com)
-*-
92886 25-JUN 05:04 General Information
RE: OS-9000 help (Re: Msg 92862)
From: EDELMAR To: JOHNREED
John,
Congratulations on getting OS9000 up and running. Which version are you
running? Using the release sold at the CocoFest in Chicago a few years ago
*may* account for some of your problems. As I recollect, there were many
bugs in it. The latest version is 1.3. - much smoother. I think its worth
spending $200 per year for the support contract. In addition to hotline
support, you should be able to get the latest version of OS9000 as part of
the package. The people at MW say version 2.0 should be released in the
next couple of months.
> 1. Comm ports. I can use T1 and T2. Even had STERM talking to CIS when I
> had the (internal) modem on T2 (COM2). Then I moved the modem to T4
> (COM4). T2 is now a simple serial port. T2 still works, I can plug it
> into an external modem or null-modem to the MM/1, but I cannot get OS-9000
> to talk to T4. Messydos & Windoze and even OS/2 can find that modem, but
> OS-9000 cannot. COM2 and COM4 are BOTH using IRQ3, but I am not trying to
> use them at the same time.
If MSDOS, etc. can find and speak to the modem correctly, its safe to say you
have the card configured correctly. Check the data for the descriptor to
be sure it matches your modem configuration. This information is stored
in '/dd/PORTS/PCAT/systype.h'. Use '/dd/PORTS/PCAT/mk.scfdesc' to make a
new descriptor. BTW, I use an internal modem on t3 - no problems.
> 2. Printer. I am using LPT1. The address of the port seems right
> accord to the BIOS and the information with the OS-9000 system.
> It even makes the lights blink and puts the Deskjet through its
> INIT routine when I load and init p.lpt1. When I try to print
> something, the lights blink on the printer and the system hangs.
> LPT1 works fine with the other operating systems, of course.
> Current method of printing from OS-9000 is to pass it via null
> modem to the MM/1.
Don't have any suggestions for this one. I've had no problems. Currently,
I'm using either an old OKI 192 or a HP 4+. Both work fine. You might
try calling MW's hotline.
> 3. Disk formats. No big deal here, but I sure can't get the MM/1
> and the OS-9000 system to agree on what a "universal disk" is. I
> CAN get them both to read and write on a High density messydos
> disk, so I use that for transfers.
OS-9/68000 and OS9000 'universal formats' are not the same. If I remember
correctly, the main difference is where the FAT is placed. Using 'os9copy'
or 'os9dsave' located in the '/dd/CMDS/UNSUPPORTED' directory, you should
be able to read OS-9/68000 universal format disks. Otherwise, you're doing
what most of us are doing - transferring via MSDOS disks or via the serial
port.
> 4. Graphics. Anything available to get OS-9000 to speak to the
> Trident 94xx VGA card in this beast? I need a CGFX_VGA.L lib
> (grin).
Well, I have G-WINDOWS for OS9000. Have 2 drivers that should work with your
card'. These are generic drivers giving a resolution of 640x480x16. I have
additional drivers for specific cards (the Trident isn't included) providing
resolutions up to 1200x1024x256. With the optional Developer's Pak, you
have what you need to write software for gfx using G-WINDOWS. Alternatively,
you can purchase RAVE. I don't think there is a driver for the Trident cards,
but a skeleton driver is included you can fill in to make your own driver.
Ed
-*-
End of Thread.
-*-
92870 22-JUN 20:44 General Information
Special Announcement:Late Night addition
From: THETAURUS To: ALL
Well, yes there is another change in the schedule, but I think
ya'll will like this. July 31st was originally scheduled as an
_Open Forum_ but I just got email recently confirming a
conference I've been trying to get for some time.
Monday July 31, 1995 at 10:00 pm Est D.A.V.I.D W/ David
Kimble
D.A.V.I.D, Microware's latest OS-9 based project which has been
getting a lot of press as of late, is the software environment
produced for the television decoders, otherwise known as set-top
boxes. D.A.V.I.D will be at the the heart of interactive
television technology that will be at our fingertips in the not so
distant futuure. David Kimble is an employee of Microware who is
very active with the DAVID Project. He will be on hand to answer
any questions about this product, which will be usefull for a WIDE
range of applications, right through the TV set.
My knowledge about D.A.V.I.D is limited which is why I'm glad
David Kimble(appropriately named :-) ) was kind enough to guest
host this conference. I can tell you there has been a good amount
of attention paid to it by the press as companies jump on the
Microware bandwagon in it's support.
There are others here who can do a better job of explaining it,
but on April 31st have your questions ready for David Kimble as he
gives us a little insight on what has to be the brightest spot in
the future of OS-9. Can any of you think of a good summary of
D.A.V.I.D to introduce it to users here in forum?
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92871 22-JUN 20:45 General Information
New Late Night Schedule
From: THETAURUS To: ALL
OS-9 Late Night
Conference Schedual
For February AND March
Date Time(EST) Topic
June 5, 1995 10:00 PM Open Forum
June 12, 1995 10:00 PM Let the Games Begin!
What are your favorite OS-9 and Coco based games? There
have been many to come along over the years, not even
including what is available for CD-I! What new games would
be nice to see? Gaming enthusiasts will want to be onhand
for this :-)
June 19, 1995 10:00 PM Open Forum
June 26, 1995 10:00 PM Open Forum
July 3, 1995 10:00 PM Open Forum
July 10, 1995 10:00 PM Beginners Night!
How do I set up OS-9 correctly? What modules should I
patch/leave alone? What apps should I buy, where can I get
them? Why do I keep getting this (#'%("!(%&! error 216
message!? Find out all this and more on Beginners' night!
July 17, 1995 10:00 PM Open Forum
July 24, 1995 10:00 PM OS-9 User's Group
Discussion
Mike Rowen, the Vice-President of the OS-9 Users' Group
representing the Level's I and II users of OS-9, will be on
hand. He is going to cover ideas for upcoming projects to
maintain activity for those using OS-9 on a 6809 or
compatible based machine(Coco 3,Dragon, etc..). If you are a
Level I or II user you will want to attend and give Mike any
feedback you may have, or drop him a line and let him know
if you are available to to get involved in any future
projects.
July 31, 1995 10:00 PM D.A.V.I.D Disucussion w/
Microware's David Kimble
The media is talking about it, and on July 31st, we will
be talking about it also. David Kimble, part of the
Microware's D.A.V.I.D team will be on hand to discuss
technology's latest interactive,multimedia,information
device that will be in our homes and on top of our
television sets in the not to distant future. Don't miss it!
See Ya
Chris Perrault
OS-9 Users' Group
Sourcebook Coordinator
-*-
92873 22-JUN 22:40 General Information
Conect
From: REVWCP To: ALL
Dear Friends:
I am posting this message for those who have been asking about
Rick Ulland and Conect. He has not been on Delphi or on line
for awhile and I thought that I would take the opportunity to
offer an explanation. Due to a series of events beyond his
control, Rick had to move a few months back. He moved into a
nice old duplex on the west side of Milwaukee.
Now comes the problems. Rick had to temporarily suspend his
Delphi account. No problem, since I was letting him use mine
in the interim.
Second problem, the telephone lines to his flat were in ghastly
condition, hanging on by a thread to say the least. They
crashed. A major rewiring job is needed and the phone company
is still arguing over who should pay what. Having faced a bill
of over $300.00 to get phone service for Saint Joseph's several
years ago, I know how hard it is to get the money together.
For the time being, please send any messages that you have for
Rick to me and I will relay them. I see Rick every friday evening
and so I can probably get to him quicker than USMail. I want to
repeat that he is still in business. I am using one of his
FAST-232 paks, (and it is is fast).
++++++++++++++++++++++++++++++++++++++++++++++++++++++
+: With all best wishes, ::::: When all else fails :+
+: Brother Jeremy, CSJW ::::::::::: ask a Monk :::::+
+: OS9 Users Group Treasurer ::::::::::::::::::::::::+
+::::::::::::::::::::::::::::::::::::::::::::::::::::+
+::: revwcp@delphi.com :::::::::: CIS - 76477,142 :::+
++++++++++++++++++++++++++++++++++++++++++++++++++++++
-*-
92878 23-JUN 22:07 General Information
Dallas Semiconductor 1284 chip?
From: MARTYGOODMAN To: ALL
Does anyone here have a catalog that has info on Dallas Semiconductor
clock chips? I'd like data on a Dallas Semiconductor DS1284 chip.
This is a 28 pin chip that is hooked to a 32KHz watch crystal
(pins 2 and 3) and to a source of uninterruptable power on pin 28,
with all 8 data lines, ground, chip enable, and r/w wired in parallel
with a 32 pin static RAM chip in the same circuit.
I'd like tech specs on this chip, including both hardware and software
info on how to wire the thing in and how to acess it.
Thanks for any help you can give me.
---marty
-*-
92885 25-JUN 01:00 General Information
auto logon,terminal identifier
From: SMITHBA To: ALL
I am using SC2.3 autodialer to log on to delphi.
after tymnet answers i get connect 2400 then 18 astrics
I press o and it gives me the time and date.
autodialer answers the login prompt with delphi.
then answers user id and password
i CAN'T get it to do the o for the identifier
i tried using connect 2400 and the astrics for a
search string, but autodialer didn't see them
HELP
BRIAN SMITH
-*-
92887 25-JUN 10:59 General Information
RE: auto logon,terminal identifier (Re: Msg 92885)
From: RANDYKWILSON To: SMITHBA
Brian,
Try:
CNS=\*\*\*o
SS1=login
RS1=delphi\M
etc.
Randy
-*-
92929 1-JUL 13:17 General Information
RE: auto logon,terminal identifier (Re: Msg 92887)
From: SMITHBA To: RANDYKWILSON (NR)
Randy,
Thanks for the info. If I would RTFM like my teacher says,
then I would have known that.
I had to use CNS=\*\*\*\*\*\*o
3 pauses wasen't enough, but 6 worked just fine.
Later, BRIAN
-*-
End of Thread.
-*-
92895 25-JUN 14:15 General Information
Int
From: CLTUCKER To: ALL
I would li
-*-
92911 26-JUN 19:56 General Information
RE: Int (Re: Msg 92895)
From: THETAURUS To: CLTUCKER
>>I would li<<
C'mon, spit it out...<Grin>
-*-
End of Thread.
-*-
92900 25-JUN 21:21 New Uploads
upload
From: FHOGG To: MISAL (NR)
Hi,
I kept getting dropped while trying to upload a new demo version of CDL Basic.
I got the first of 3 files uploaded when the problem happened. I'll try again
tomorrow.
Thanks
Frank
-*-
92901 25-JUN 22:54 OSK Applications
MM/1 System For Sale
From: ERNIEWITHERS To: ALL
For Sale: Complete MM/1 System, S/N 120848 with IMS manuals
Includes: IMS Slimline case & power supply
I/O board
OS-9/68000 v2.4 with Microware manuals
3 megabytes RAM
4 serial ports (/t0, /t1, /t2, & /t3)
2 parallel ports (/p & /p1)
2 1.4MB floppy drives
105 MB Quantum hard drive
101 key XT/AT switchable keyboard
Logitech 3 button Series 9 serial mouse
Magnavox 8CM515 color monitor
MM/1 Technical Manual
Software: FHL's FBU & FRS backup/restore software
(Includes original FHL's DynaStar & DynaForm for 68000
disk & manual) BGFX
Fontasee font editor
WriteRight word processor
Speedisk disk defragmenter
Ved, Vprint, & Vmail
EthaGUI
Desktop
TasCOM
ColorSystems Game Pack
Lots of public domain software
Asking $700.00 for the complete system. I will bring this system to the
Atlanta 'Fest if anyone is seriously interested.
If interested, leave E-Mail.
Ernest Withers CIS: 71545,1117 Delphi: ERNIEWITHERS
-*-
92902 25-JUN 23:09 General Information
MM/1 System For Sale
From: ERNIEWITHERS To: ALL
For Sale: Complete MM/1 System, S/N 120848 with IMS manuals
Includes: IMS Slimline case & power supply
I/O board
OS-9/68000 v2.4 with Microware manuals
3 megabytes RAM
4 serial ports (/t0, /t1, /t2, & /t3)
2 parallel ports (/p & /p1)
2 1.4MB floppy drives
105 MB Quantum hard drive
101 key XT/AT switchable keyboard
Logitech 3 button Series 9 serial mouse
Magnavox 8CM515 color monitor
MM/1 Technical Manual
Software: FHL's FBU & FRS backup/restore software
(Includes original FHL's DynaStar & DynaForm for 68000
disk & manual) BGFX
Fontasee font editor
WriteRight word processor
Speedisk disk defragmenter
Ved, Vprint, & Vmail
EthaGUI
Desktop
TasCOM
ColorSystems Game Pack
Lots of public domain software
Asking $700.00 for the complete system. I will bring this system to the
Atlanta 'Fest if anyone is seriously interested.
If interested, leave E-Mail.
Ernest Withers CIS: 71545,1117 Delphi: ERNIEWITHERS
-*-
92903 26-JUN 10:33 General Information
NEW CONFERENCE
From: MROWEN01 To: ALL
ANNOUNCEMENT:
I am pleased to announce the formation of the OS-9 IRC conference. Please
join us if you are free on Sunday, 2 Jul 95 at 10PM ET. The topic of our
first meeting will be the conference itself and what future direction it
should take. This forum is open to all flavors of OS-9, so bring your
knowledge, your questions, and your opinions. I'm committed to molding
this conference to meet the needs of it's members.
Type /join #os9 to access the conference on the irc.
If you have more questions, email me at the address below.
Mike Rowen
VP OS-9/6809
OS-9 Users Group
mrowen01@delphi.com
-*-
92914 26-JUN 21:44 OSK Applications
BMP files
From: MRGOOD To: ALL
Is there a BMP file viewer (or format converter) for OSK and/or the MM1?
Hugo
-*-
92916 26-JUN 23:40 OSK Applications
RE: BMP files (Re: Msg 92914)
From: MITHELEN To: MRGOOD
Yes... Joel Hegberg is working on one, and infact, just sent out a BETA
version on the mushroom list today. You might ask him for a copy... I
haven't tried it yet myself. Got to get it transfered to my MM/1 first.
--
Paul
-*-
92917 26-JUN 23:41 OSK Applications
RE: BMP files (Re: Msg 92914)
From: JOELHEGBERG To: MRGOOD
> Is there a BMP file viewer (or format converter) for OSK and/or the MM1?
Hugo,
Actually, funny you should ask... I just finished writing one a few
days ago and it's in beta testing. I'll email you the beta version.
What's even more strange is Ken Scales thought how nice it would be to
have a BMP viewer the very morning before I emailed the beta version
off to him and a few other people! Psychic link! :)
-- Joel.
-*-
92920 27-JUN 22:47 OSK Applications
RE: BMP files (Re: Msg 92917)
From: MRGOOD To: JOELHEGBERG
Thanks Joel! With all this Windows stuff taking over the world, there are
lots of BMP files out there. I'll try to give it a workout.
Hugo
-*-
92926 30-JUN 22:50 OSK Applications
RE: BMP files (Re: Msg 92917)
From: TEDJAEGER To: JOELHEGBERG
Hi Joel,
Would you email me a BETA copy of that BMP viewer as well!
Thanks
Bests
---TedJaeger
-*-
92927 1-JUL 02:41 OSK Applications
RE: BMP files (Re: Msg 92926)
From: JOELHEGBERG To: TEDJAEGER
Sure thing, Ted.
-- Joel.
-*-
92928 1-JUL 11:26 OSK Applications
RE: BMP files (Re: Msg 92927)
From: VAXELF To: JOELHEGBERG
joel,
I have archived two BMP's from my Monty Python collection that will now
work with the bmpshow program. I then uuecoded them and sent them to you
via email. Hope they help. btw they do load and display on my son's MSDOS
system.
John D.
-*-
92930 1-JUL 13:23 OSK Applications
RE: BMP files (Re: Msg 92914)
From: NIMITZ To: MRGOOD
A BMP file viewer has just been released in beta to developers. I expect
more development on this front in the next few months....
David
-*-
End of Thread.
-*-
92915 26-JUN 22:54 General Information
RE: Help! My computer hates me! <Grin> (Re: Msg 29198)
From: CCMAN To: EDDIEKUNS (NR)
Hi. My Magnavox 8cm515 monitor went on the blink. I'm using a TV which doesn't
work very well. The monitor just quit working while it was on one night. It
makes a noise but the power light doesn't come on. Does anyone have any ideas
as to what is wrong wit
h it? Is there any other monitors that I could use with a CoCo III? Any help
would be appreciated. :) Ralph Fehringer
-*-
92919 27-JUN 22:13 General Information
RE: Your club Info Request...
From: MRUPGRADE To: MICHAELJN
RE: Information on the UPGRADE to you and a number
who have asked about our Magazine "The UPGRADE".
After contributing a broad base support thoughout the Color
Computer Community, for a number of years now,,, I'm always a bit
surprise the person hasn't heard of us.
And they,,, are surprised to find our subscription is such a
bargin. And naturally want more information.
Well perhaps I should mention our Group a little more often.
So here goes,,,
We are "Mid Iowa & Country CoCo". I think some see the Mid Iowa
and assume we're a little group some where in Iowa. Well, we used
to be that. We kept the "Mid Iowa" after expanding to "& Country",
because we wanted to keep the small group atmosphere. And we have
managed to do that despite expanding to a membership in over 40
states, plus Canada and on to Austrailia, Argentina & England. Now
yur gonna why 'ud all these guys (and several gals) want to join our
group? I mean it's a (grin) bit of hike getting to a meet right?
Not really. "The meet" comes to your frount door. Monthly in
the winter months,, bi-monthly during the summer. That "The
UPGRADE Disk Magazine produced by "Mid Iowa & Country CoCo", will
come filled (the last four issues were double sided) with articles
from our members all over the US and Canada. I have to mention
Canada, because that's where our lead OS-9 writer lives. Chris
Dekker of C DEKKER Software, graces our magazine with his "OS-9 in
??? Many Easy Steps", series. Plus other Chris Dekker articles
"exclusive to our magazine".
Which brings up another subject... Recently an OSKer was making
the usual remark,, "of course your RSDOS, and my interest is
strictly in O9". I say usual, because there are a few OS-9 vendors
who cannot overcome their habit of stereo-typing. Or they think I'm
as narrow minded as they? I donno,, I've given up. But it boils
down to this; I personally don't use OS-9. Consequently you won't
see me in a how to get this or that module, conversation on the
net. What the heck I don't know how to fix a disk controller
either,,, That's why I asked Marty Goodman to write that article
and others.
If your using RSDOS, we have articles on it. If you want hardware
information, we have articles on that. If you want CoCo OS-9
support,, The UPGRADE Disk Magazine, I believe offers the "BEST OS-9
support for the CoCo in the Color Community today"!! Earlier
articles include James Jones & Boisey, as well we offer OS-9 by a
variety of authors. But we don't stop there. We have along with
our MI&CC library (available to England, Australia, or anywhere in
between):
A Well organized CoCo 3, Applications, HAM, Christin Software, AND
OS-9 Disk library. No hodge podging,, each diskette catagorized.
Rather then 1000 + disks, again you're not getting a hodgepodge of
so-so software. We select only the best. (please don't ask me to
list 'em here. They are on each UPGRADE disk)
BUT WE DON'T STOP THERE! Where can you find the really hard to
find hardware? Seen any DS-69's, Rathscans, or MAXSOUND digitizers
here lately? How about a Burk'n Burke HD set up ready to go? A
Disto MEG RAM drive? Eleminator, Disto controller, 3-in-1
boards? You name it. Most of this was in last months "For Sale"
column along with the usual CC3's drives and other CoCo equipment.
All of it has been there, and most likely will be back. Or list
your stuff for sale. No fee it's just a part of being a
member/subscriber.
You get the disk, answer a couple of system config inputs,, and on
it opens with a new graphic each month. Followed by a newsmagazine
contents style, graphic page listing articles. You can read 'em to
screen or dump to printer as you wish. Other graphics are included
with some articles. Ya just can't (smile) get animation to work
with a hard copy.
Now for the hard part: The price? I would think sixty bucks a
year (the price of one RSODS only disk) would be fair. But the
thing is we are a "not for profit group". So how about half that?
That would be a good deal but it doesn't even cost that much. Can
you believe it??
Just put $16.00 ($21 Canada/ $31 forign air)
in the mail and you'll have a full years membership/subscription.
Appx 10 disks (15 if you count sides full) per year will come to
your door. Chalked full of the information and services you want
for your CoCo.
Terry Simons Treas/ Editor, The UPGRADE Disk Magazine
1238 48th, Des Moines, Iowa 50311
Do it today,, and you can't forget tomorrow.
-*-
92924 30-JUN 00:28 General Information
Greetings from Allen
From: JOELHEGBERG To: ALL
From Allen Huffman:
Greetings all. This is Allen at Joel's machine just taking this
opportunity to post a quick hello to everyone on Delphi. I hope to be
joining you guys sometime in the near future (now that I can Telnet
there from the service I subscribe to and save on long distance
charges). Anyway, hello from Sub-Etha Software!
Allen C. Huffman
coco-sysop@genie
.geis.com
-*-
92925 30-JUN 12:21 General Information
IRC CONFERENCE REMINDER
From: MROWEN01 To: ALL
REMINDER:
I just want to remind everyone that the 1st OS-9 IRC conference will be
Sunday 2 Jul 95 at 10:00PM ET. /join #os9 once you're on the IRC. Hope
to see you there!
Mike Rowen
VP OS-9/6809
OS-9 Users Group
mrowen01@delphi.com
-*-
92931 2-JUL 00:09 OSK Applications
OSK C Bug
From: WRHAMBLEN To: ALL
The Microware C compiler release 3.2 running under OS-9/68000 release 2.4
apparently has a problem with the ? operator and string constants. A
line of code such as:
s = flag ? "string1" : "string2"
sometimes generates code with the wrong value for the pointer to a
string constant. This caused me a bit of head-scratching. The work
around is to avoid this construct or to use GCC.
Bud
-*-
FORUM>Reply, Add, Read, "?" or Exit>