52 lines
2.6 KiB
Plaintext
52 lines
2.6 KiB
Plaintext
*** Yet Another Way to Kill a Car!***
|
|
|
|
|
|
--==Disclaimer==--
|
|
The author of this text or the group is in no way responsible
|
|
for personal injury, property damage, death, dismemberment, or any other
|
|
harm caused by any idea's contained in this text.. These idea's are in
|
|
no way meant to be tried and are made solely for an educational purpose...
|
|
|
|
|
|
******The Procedure******
|
|
|
|
Ok, this is really simple, and the person will never notice
|
|
until there car overheats.. And by then you'll be long gone and they
|
|
have no way to trace it back to you..
|
|
|
|
Ok, here's all you have to do.. As we all know, every car has a
|
|
radiator to cool the engine, and the radiator is made of this tubes and
|
|
little copper or aluminum fins that direct the air blowing in the grill
|
|
over the tubes that cool the water for there car.. So, anyway, these little
|
|
fins are really easy to bend because there made of thin copper or aluminum
|
|
metal.. So all you have to do is kneel down under the car in front by
|
|
the grill and look up, there's the radiator, on the side facing the grill
|
|
in the front of the car run your finger nail over the fins and tada, there
|
|
bent over and no air can pass through.. Now do this to as many rows as
|
|
possible, ten should do to make the car overheat, but if you do more
|
|
it will work faster and probably do more damage.. If the fins are made
|
|
of aluminum or you can't get them to bend with you hand just take a small
|
|
wire brush run that over them in the same fashion, remember to only bend
|
|
once and in one direction otherwise they could break off or partially
|
|
re-open.. Good luck.. Happy Mischieve and don't get caught.!!
|
|
|
|
Ok, here's another way to screw up a persons cooling system..
|
|
While bent over under the car, you could take a screwdriver and losen up
|
|
the bottom radiator hose.. This hose is on the passenger side (usually),
|
|
and takes the pressurized water coming back from the engine into the
|
|
radiator.. All you need is usally a flat head screwdriver, just losen up
|
|
the little round clamp holding the hose to the radiator, then slightly tug
|
|
on the hose to get it unstuck from the metal.. Thats it.. Then when the
|
|
persons driving and the car starts to warm up the pressure will build up
|
|
in the system and blow the hose off, then the fluid will leak out of the
|
|
system and the car will overheat...
|
|
|
|
That's all the fun for now, but I'll
|
|
be back with more!!
|
|
|
|
|
|
Author: Snake (Story 1 & 2)
|
|
Orig, Idea: N/A (1), Snake (2)
|
|
Helpers: Menace
|
|
Date: 5/26/93
|