textfiles/bbs/KEELYNET/GRAVITY/biebrn1.asc
2021-04-15 13:31:59 -05:00

199 lines
8.5 KiB
Plaintext

(word processor parameters LM=8, RM=75, TM=2, BM=2)
Taken from KeelyNet BBS (214) 324-3501
Sponsored by Vangard Sciences
PO BOX 1031
Mesquite, TX 75150
There are ABSOLUTELY NO RESTRICTIONS
on duplicating, publishing or distributing the
files on KeelyNet!
December 27, 1990
BIEBRN1.ASC
--------------------------------------------------------------------
The Biefield-Brown Anti-Gravity Effect
While researching the effects of X-rays generated from a Coolidge
tube, American physicist, T. Townsend Brown found a relationship
between gravity and high voltage.
Press reports state that a 2 foot diameter disc was made to fly
around a central pole when tethered and excited with a potential of
50 KiloVolts. The disc circled the pole at almost 12 MPH.
Later improvements using 3 foot discs driven by potentials of 150
KiloVolts and up yielded results so spectacular that the test
results were classified.
Working in conjunction with Dr. P.A. Biefield, Brown found that
highly charged capacitors when properly suspended showed a tendency
to move relative to the gravitational force.
When the poles of a freely suspended charged capacitor were placed
on a horizontal axis, a forward thrust would be produced which would
move the capacitor in the direction of the positive pole. The
direction of thrust would reverse in conjunction with a polarity
change. This is the phenomenon known as the Biefield-Brown Effect.
Anti-gravity was demonstrated by placing the capacitor on a beam
balance and charging it. When the positive pole pointed upwards,
the condenser would move to a point of equilibrium, when the
positive pole was pointed downwards, the balance would show a
downward deflection.
Experiments show the intensity of the effect to be dependent on
several factors :
1) the surface area of the plates
2) the voltage differential between the plates
3) the proximity of the plates to each other
4) the material mass between the plates
5) the dielectric capacity between the plates
It is interesting to note that Brown's research was being carried
out several years BEFORE the UFO reports towards the end of World
War II.
Page 1
The Biefield-Brown Effect could be used to control the direction of
flight by distorting the gravitational field through the use of a
very high electrical charge "shaped" by the surface of the structure
from which it was emitted. The humped disc shape was determined to
be one of the most efficient.
Brown gave a successful demonstration of a flying airfoil in 1953.
The device was 2 feet in diameter with later demonstrations using 3
foot diameter craft. These were seen to fly a 50 foot diameter
course.
Formal scientists tend to dismiss such phenomena as being due to the
"electrical wind" (ion) effect, yet Brown thoroughly disproved this
by flying the discs in a vacuum. Results of this airless test were
deemed astonishing.
--------------------------------------------------------------------
Vangard note...
There are reports that Brown was directly involved in the
Philadelphia Experiment. His knowledge of the effects of high
voltage on matter seems to have been made use of, but then we
have heard that Einstein and Tesla were also involved.
Both sources are somewhat spurious and one in particular freely
distorts or "incorporates" information to bolster his contentions
(see BIELEK1.ZIP).
On a personal visit to Peter Kelly's lab in Georgia, I was
looking at Peter's Museum of old Radionic equipment. Under a
table was a large aluminum disc about 2 to 3 foot in diameter,
thick in the center and tapering toward the rim. Next to this
was a plate with two rows of metal spheres.
The spheres appeared to be of aluminum and began with a smaller
diameter in the left hand corner, a slightly larger diameter
opposite (on the right) and closer together, a slightly larger
diameter sphere (on the left) and slightly farther apart and on
and on.
These ever larger diameter spheres were placed in a zig-zag
fashion with ever increasing distances between them.
I asked Peter what it was and he said the disc and sphere table
were parts of Townsend Brown's experiment which he had acquired
in his many travels and contacts.
Of course I was totally fascinated with the artifacts and we
discussed what the spheres were for. Peter is an Electrical
Engineer and a researcher in field energies particularly in the
area of Radionics. He studied extensively with the late Dr. T.
Galen Heironymous and has made a name for himself in this and
other areas. Pete and his wife Marianne can be contacted at PO
BOX 167, Lakemont, Georgia, 30552.
Apparently the spheres were used as a simple way to generate high
voltages. Electrical potential is dependent on the surface area
of the electrode, in this case, a small diameter sphere would be
charged to its maximum potential.
Page 2
A large diameter sphere would be placed at a distance sufficient
to allow electrical breakdown (arcing) to occur which would
discharge the first sphere into the second.
This process would then replicate as the 2nd sphere accumulated
a high charge which would discharge into the 3rd larger diameter
sphere spaced at a specified distance.
A most interesting method of achieving high voltages without the
use of Tesla, Van de Graff or Wimhurst machines.
Researchers in this area will also note that the Searle disc used
a rotating metal plate which built up a high electrical charge on
the outside rim.
Searle believed that at sufficiently high rotational velocities,
electrons would be centrifugally thrown to the outside rim.
Another link to this effect is that of DePalma and Tewari with
the Faraday HomoPolar Motor. When a spinning cylindrical magnet
has a disc conductor attached to one pole and rotating with the
magnet, a voltage can be detected when measuring between the
center and the outside rim of the conducting disc.
To my knowledge, there are NO reports that Brown used rotating
AND charged discs although it is not without possibility.
This experiment is definitely worth trying and we will videotape
our experiments in this area for sale to other researchers.
--------------------------------------------------------------------
If you have comments or other information relating to such topics
as this paper covers, please upload to KeelyNet or send to the
Vangard Sciences address as listed on the first page.
Thank you for your consideration, interest and support.
Jerry W. Decker.........Ron Barker...........Chuck Henderson
Vangard Sciences/KeelyNet
--------------------------------------------------------------------
If we can be of service, you may contact
Jerry at (214) 324-8741 or Ron at (214) 242-9346
--------------------------------------------------------------------
Page 3