textfiles/bbs/KEELYNET/ENERGY/adams3.asc

77 lines
3.7 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

______________________________________________________________________________
| File Name : ADAMS3.ASC | Online Date : 12/17/94 |
| Contributed by : Bob Aldrich | Dir Category : ENERGY |
| From : KeelyNet BBS | DataLine : (214) 324-3501 |
| KeelyNet * PO BOX 870716 * Mesquite, Texas * USA * 75187 |
| A FREE Alternative Sciences BBS sponsored by Vanguard Sciences |
|----------------------------------------------------------------------------|
The ADAMS files currently on KeelyNet consist of 3 .ASC files (ADAMS1, ADAMS2
and ADAMS3) and 9 .GIFs all bundled together as ADAMS1_3.ZIP and ADAMSGIF.ZIP
on KeelyNet.
----------------------------------------------------------------------------
Msg # 4
Date: 12 Mar 94 20:56:00
From: David Galea
To: all
Subj: Adams Motor/Generator
____________________________________________________________________________
Hello all,
I am new to this echo area and I am not sure if anyone has discussed this
topic before.
I have obtained plans for constructing a motor/generator from a Mr. Robert
Adams in New Zealand and I have begun construction.
Seven people have since built this device in Australia and it seems to work
fine, but no-one can explain the effiency anomoly that occurs after about 15
minutes of running time. In the two that I have personally seen, the eff.
rating jumps from 85% (normal) then after about 15 mins goes to around 120%.
We have set up oscilloscopes, amp meters, volt meters, temp meters and can't
account for the increase.
We do not have access to a magnamonitor to measure the magnetic field on the
rotor, but we are still stumped.
Any ideas ? My intention is for it to be a Battery Charger.
David Galea
Melbourne Australia.
... OFFLINE 1.35 * Recycle! For us... and them...
--- Maximus 2.01wb
* Origin: Permaculture 1 BBS * Northcote_Aust * +61-3-482-2942 (3:632/376)
SEEN-BY: 102/2 138 355 435 741 752 756 760 851 1302 105/30 112/1 128/1
SEEN-BY: 132/888 147/7 170/400 203/23 206/1701 209/207 209 710 720
SEEN-BY: 270/101 290/627 345/31 396/1 640/75 3615/50
PATH: 632/376 711/431 401 712/515 105/42 50 3615/50 396/1 209/209
PATH: 102/2 752 756
------------------------------------------------------------------------------
Vangard Note
There are some peculiar activities that have happened with regard to the
ADAMS motor. As you can see from the above email, these fellows claim to
know of 7 people who have successfully replicated the Adams motor.
In 1993, everyone was hot for it, wanting plans and such. Within a very
short period, there was a business arrangement made with Adams which we
heard was to produce a UNITY motor to be patented and sold in the U.K..
Sometime toward the end of 1993, the talk was that the ADAMS motor had not
proven out, that no one had successfully duplicated the effect or there was
some anomaly in the measurement method. A very bizarre turnaround if you
read the above email.
At the 1994 ISNE meeting, Bill McMurtry of New Zealand gave a presentation
in which he said flat out that the Adams motor did not work. We took Bill
to dinner with Tom Bearden and Ken McNeil, but did not have an opportunity
to speak with him in detail because he and Ken had some items to discuss in
private.
The collaboration of Adams with Bruce Cathie had increased the over unity
output to numbers that were so incredible as to warrant not publishing them.
I read something about it being on the order of 1:3000. At any rate, the
Adams motor is far from dead if there have been independent successes.
------------------------------------------------------------------------------