105 lines
4.0 KiB
Plaintext
105 lines
4.0 KiB
Plaintext
___________________________________
|
|
* *
|
|
* System Crusher part II or *
|
|
* How to crash a bulletin board *
|
|
* PART TWO *
|
|
* *
|
|
* Written, idealized, and typed *
|
|
* Grim Reaper *
|
|
* Based on original system crusher*
|
|
* by Mind Master(me) *
|
|
* *
|
|
* * * * * * * * * * * * * * * * * *
|
|
|
|
Call The Order of Assassins
|
|
Opening in 10/87
|
|
Houston,Tx.
|
|
|
|
Definition: You might remember the first one in this series where I showed
|
|
you how to build a simple system crusher out of a rocket-launcher interface.
|
|
This is the ultimate design of that type, including two car batteries...
|
|
|
|
You need:
|
|
Two (2) 120+ volt car batteries or an outlet with similair attributes
|
|
A reel of copper wire, preferably insulated, about three feet
|
|
Your basic rocket-launcher detonator(with key and light,etc.)
|
|
About 5 feet of phone line
|
|
A metal box big enough to hold the car batteries(optional)
|
|
|
|
And anything else I mention here, including tools..
|
|
|
|
Steps:
|
|
|
|
1. Take the car batteries and tape them together, so that they form the
|
|
following shape:
|
|
----
|
|
1 :
|
|
----
|
|
----
|
|
2 :
|
|
----
|
|
Thus, battery one and two.
|
|
Now take some copper wire and wire a split, like this..
|
|
:
|
|
:
|
|
:
|
|
/ \
|
|
/ \
|
|
(1) (2)
|
|
|
|
Area one will be wired to the positive bolt of battery one, area two will be
|
|
wired to the positive bolt of battery two.
|
|
Now do the same thing with the negatives, including wiring a new split.
|
|
It should look something like this...
|
|
:
|
|
: :
|
|
:-:-
|
|
: : \
|
|
/ / \ \
|
|
/ / \ \
|
|
----- -----
|
|
:- +: :+ -:
|
|
: 1 : : 2 :
|
|
----- -----
|
|
|
|
Now if you can make that schematic out, you'll see that there are two
|
|
split wires, one connecting the negatives, and one connecting the
|
|
positives...remember, DO NOT CROSS THE WIRES!
|
|
|
|
2. Next you'll have to split apart the extra phone line you have and
|
|
then strip the red and green wires, it'll be wise to rip out the yellow
|
|
and black. Then connect the positive alligator clip on your launcher
|
|
to the skinned red wire. Now do the same with the negative clip and the
|
|
green wire.
|
|
|
|
3. Now connect the positive split wire on the battery hookup to the
|
|
positive receptor in the launcher. Now do these same with the negative
|
|
split wire and receptor.
|
|
You might want to wrap electric tape around these so they will not
|
|
rip loose.
|
|
|
|
4. Now take your phone line that you just made and substitute it for
|
|
the one that is currently connected to your modem-jack or if you have
|
|
an internal, the computer-to-jack, or whatever one connects into the wall.
|
|
|
|
5. Make sure that you do not have the key inserted in your launcher.
|
|
Then dial a board and make sure you're connected..then turn off your modem
|
|
or your computer(exteranl-internal again).
|
|
|
|
6. Slip the key into the hole and turn, this should give you a light lit
|
|
on your launcher, if it doesn't, then you need to check the connections.
|
|
If you have the light on, then PRESS THE BUTTON!
|
|
This should send some mucho voltage throught the line and into the victim's
|
|
modem..possibly making it malfunction.
|
|
|
|
REASONS FOR IT NOT WORKING
|
|
|
|
1. Your wires are bad, or you have messed up connecting them.
|
|
2. The victim had a modem-line surge protector.
|
|
3. The voltage blew the system connector on your house.
|
|
|
|
There are other things, but you'll have to figure them out for yourself.
|
|
|
|
Good day, I hope it works for you!
|
|
|
|
Grim Reaper |