textfiles/apple/DOCUMENTATION/echo.txt

203 lines
4.9 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

ECHO 1.0 DOCUMENTATION
------------------------
CHANGING PARAMETERS
-------- ----------
- THE CURSOR WILL FLASH OVER THE DIGIT
YOU ARE ABOUT TO CHANGE.
- TYPING RETURN WILL MOVE THE CURSOR DO
WN TO THE NEXT PARAMETER.
- THE TWO ARROW KEYS MOVE THE CURSOR FR
OM DIGIT TO DIGIT.
- WHEN YOU GET TO THE FRAME BITS PARAME
TER THE RETURN KEY WILL START
THE COPY.
PARAMETER DEFINITIONS
--------- -----------
SOURCE SLOT: RANGE: 1-7 DEFAULT:
6
SOURCE DRIVE: RANGE: 1-2 DEFAULT:
1
TARGET SLOT: SAME AS SOURCE EXCEPT
TARGET DISK
TRACK PHASE: RANGE: 0-2 DEFAULT:0
DEFINITION: WHEN SET TO 0 ECHO ON
LY READS WHOLE TRACKS.
WHEN SET TO 1 ECHO RE
ADS HALF TRACKS.
WHEN SET TO 2 (SEE SP
ECIAL FEATURES) ECHO TRIES TO
FIGURE OUT WHAT TO
READ.
TRACK START: RANGE: 0-23 DEFAULT:
00
DEFINITION: FIRST TRACK THAT ECHO
WILL COPY.
TRACK END: RANGE: 0-23 DEFAULT:
22
DEFINITION: LAST TRACK THAT ECHO
WILL COPY.
TRACK COUNT: RANGE: 1-23 DEFAULT:
1
DEFINITION: NUMBER TO INCREMENT B
Y
EXAMPLE: TRACK 1-12 TRACK COUNT:
3
COPY: 1-4-7-10 ETC.
ENABLE SYNC: RANGE: 0-1 DEFAULT:
0
DEFINITION: IF IT'S A 1, ECHO SYN
CS THE TRACK
(SEE SPECIAL FEATURES
)
ENABLE COUNT: RANGE: 0-1 DEFAULT:
0
DEFINITION: IF IT'S A 1 NIBBLE CO
UNTING IS SELECTED.
(SEE SPECIAL FEATURES
)
FRAME BITS: RANGE: 0-2 DEFAULT: 1
DEFINITION: THE NUMBER OF '0' BITS
ECHO WILL WRITE AFTER
EACH SYNC BYTE. IF
'0' IS SELECTED ECHO ENABLES
IT'S LENGTH KILL FEA
TURE (SEE SPECIAL FEATURES)
.NP
ECHO'S MESSAGES
------ --------
IN THE LOWER RIGHT HAND BOX WHEN COPYIN
G YOU WILL SEE SOMETHING IN A
FORMAT LIKE THIS:
TT SSSS LLLL
E
TT = TRACK NUMBER
SSSS = NUMBER OF SYNC BYTES ON THE
TRACK
LLLL = LENGTH OF THE TRACK
E = ERROR CODE
THE TWO LONG BOXES ON THE RIGHT HAND SI
DE ARE THE TRACK INFORMATION
FIELDS. IN THEM YOU WILL SEE SOMTHIN
G LIKE THIS:
TT +NN
OR
TT -NN
TT = TRACK # NN = DIFFERENCE BETWEEN
SOURCE AND TARGET INFORMATION.
IN THE PHASE FINDER MODE, THE TWO BOXES
WILL FORMAT LIKE THIS:
TT N
TT = TRACK # N = WHOLE TRACK IF IT'S
A 0, HALF TRACK IF IT'S A 1
ERROR CODES
----- -----
ERROR 0: ECHO HAD NO PROBLEM COPYING T
HIS TRACK
ERROR 1: ECHO COULDN'T DETERMINE LENGT
H OF TRACK WHEN IT WAS READ.
> THIS ERROR IS FATAL. IF YO
U GET IT TRY AGAIN AND HOPE!
ERROR 2: ECHO COULD NOT DETERMINE THE
START OF THE TRACK. THE TRACK
MAY OR MAY NOT HAVE BEEN CO
PIED CORRECTLY
ERROR 3: IF YOU GET THIS ERROR YOU BET
TER GET ANOTHER COPY OF ECHO
1.0 BECAUSE THIS ERROR IS N
OT BEING USED YET.
ERROR 4: TARGET DISK IS WRITE PROTECTE
D
ERROR 5 ECHO COULD NOT VERIFY THE TRA
CK THAT IT WROTE. THE TRACK
MAY OR MAY NOT HAVE BEEN CO
PIED SUCCESSFULLY.
ERROR 6 TRACK LENGTH IS DIFFERENT THE
N THE ORIGINAL. THIS ERROR
ONLY HAPPENS WHEN YOU USE E
NABLE COUNT. ECHO WILL
CONTINUE TO WRITE THE TRACK
UNTIL THE LENGTHS ARE THE
 SAME.
ERROR 7: ECHO COULDN'T SYNC THE TRACK.
SPECIAL FEATURES
------- --------
PHASE FINDER
DEFINITION: DISPLAYS A 0 IF IT'S A W
HOLE TRACK AND A 1 IF IT'S A
HALF. THIS IS ONLY A STATISTICAL E
VALUATION AND MAY BE UNRELIABLE.
SYNC MODE
DEFINITION: SYNCS THE DISK. IF YOU G
ET EITHER AN ERROR 2 OR AN
ERROR 7 THEN ECHO 1.0 CAN'T SYNC THE
TRACK.
COUNT MODE
DEFINITION: ENABLES NIBBLE COUNING.
TRY NOT TO NIBBLE COUNT UNLESS
ALL ELSE FAILS.
LENGTH KILL
DEFINITION: IF THE FRAME BITS PARA
METER IS SET TO 0 THEN THE
LENGTH KILL FEATURE IS IN EFFECT. T
HIS SHOULD ONLY BE USED IF YOU
CANNOT OVERCOME THE ERROR 5'S.
EXIT
DEFINITION: IF YOU TYPE THE ESC KEY
FROM ALMOST ANYWHERE IN THE
PROGRAM IT WILL RETURN YOU TO THE CH
ANGE PARAMETER MODE.
.NP
TROUBLE SHOOTING
------- --------
ERROR 0'S: IF THE COPY DOESN'T WORK T
RY SYNC OR NIBBLE COUNT. IF
IT STILL DOESN'T WORK TR
Y 0 OR 2 FRAME BITS.
ERROR 1'S: TRY READING AGAIN. IF IT H
APPENS AGAIN TRY ANOTHER
COPIER. THIS ERROR IS R
ARE.
ERROR 2'S: TRY A FEW TIMES - THE CO
PY MAY STILL WORK.
ERROR 3'S: IF YOU GET THESE GET ANOTH
ER COPY OF ECHO.
ERROR 4'S: THE TARGET DISK IS WRITE P
ROTECTED.
ERROR 5'S: TRY SEVERAL TIMES OR SET
FRAME BITS TO 0.
ERROR 6'S: IF THE TRACK LENGTH NEVER
GETS TO 0 TRY SETTING FRAME
BITS TO 2 AND TRY AGAIN.
ERROR 7'S: TRY COPYING TRACK 0 PHASE
0 FIRST. IF ALL ELSE FAILS
DON'T SYNC THE TRACK.