329 lines
14 KiB
Plaintext
329 lines
14 KiB
Plaintext
|
||
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
|
||
³ ³
|
||
³ WELCOME TO MUZZLELOADING ³
|
||
³ ³
|
||
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
|
||
|
||
|
||
The material in this document originated from a non-copy-
|
||
righted pamphlet from E.M.F. Co. Inc, 1900 E. Warner Avenue -
|
||
Suite 1D, Santa Ana, CA 92705. They are importers of various
|
||
muzzle loading weapons.
|
||
|
||
Their pamphlet is useful for those interested in muzzle
|
||
loading weapons and is reprinted here (except for pictures) to
|
||
help you understand black powder firearms and the safety precau-
|
||
tions required when using them. Study this well. If you have
|
||
further interest, please contact us for other black powder
|
||
related books. Combat Arms can send them to you and you may order
|
||
them by phone or over the BBS. The titles change from time to
|
||
time, so a listing is not presented here.
|
||
|
||
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
||
|
||
POWDER
|
||
|
||
ÉÍÍÍÍÍÍÍÍÍÍÍ»
|
||
º º
|
||
º CAUTION º
|
||
º º
|
||
ÈÍÍÍÍÍÍÍÍÍÍͼ
|
||
|
||
Use only black powder or the proper grade of Pyrodex in all
|
||
muzzle loading firearms. Note that Pyrodex is UNSUITABLE for
|
||
flintlock firearms.
|
||
|
||
The term "black powder" refers to a TYPE of gun powder, NOT
|
||
A COLOR! If in doubt, don't use it!
|
||
|
||
BLACK POWDER TYPES
|
||
|
||
Fg The coarsest type of black powder. It is to be
|
||
used in big bore (.70 caliber and larger) fire-
|
||
arms, scale model cannons and black powder shot-
|
||
guns.
|
||
|
||
FFg For use in smooth bore muskets, in muzzle loading
|
||
rifles over .45 caliber and in black powder
|
||
shotguns.
|
||
|
||
FFFg The most commonly used powder. Use it in muzzle
|
||
loading rifles over .45 caliber and in black
|
||
powder shotguns.
|
||
|
||
FFFFg This is the finest granulation of black powder. It
|
||
is used for priming flintlocks ONLY.
|
||
|
||
PATCHING
|
||
|
||
Use only linen or 100 % cotton for shooting patches. The
|
||
fabric you use should have a hard finish and be tightly woven,
|
||
between .007" and .020" thick.
|
||
|
||
-Recommended Precut Patch Sizes-
|
||
Caliber Patch Diameter
|
||
|
||
.45 1"
|
||
.50 1 1/8"
|
||
.54 1 1/4"
|
||
.58 1 3/8"
|
||
|
||
All of your patches should be lubricated before loading. Use
|
||
a clean burning grease or commercial patch lube such as Hoppe's 9
|
||
Plus, Hodgdon's Spit Patch, or saliva.
|
||
|
||
BALL OR BULLET?
|
||
|
||
The patched round ball is thought to be the most accurate
|
||
bullet for use in rifled, single shot muzzle loading firearms. If
|
||
your rifle's manufacturer recommends a Minie-ball or conical type
|
||
bullet, by all means, try it.
|
||
|
||
Be sure to use only pure lead in casting any type of bullets
|
||
for use in muzzle loaders. Plumber's lead is good. Wheel weights
|
||
are too hard. Always use a lubricated cloth patch when using a
|
||
round ball. Always load round ball with the sprue end up (the
|
||
sprue is the flat place on the cast round ball).
|
||
|
||
IGNITION SYSTEMS
|
||
|
||
The two most common forms of ignition in contemporary muzzle
|
||
loaders are flintlock and percussion. In the flintlock system, a
|
||
piece of flint strikes a hardened piece of steel (the frizzen),
|
||
causing a shower of sparks, which in turn ignites a small quanti-
|
||
ty of powder in the lock pan. This ignites the main charge in the
|
||
barrel and fires the gun.
|
||
|
||
In the percussion system, the priming charge is replaced by
|
||
the percussion cap. This cap is placed on the nipple, or cone.
|
||
When struck by the hammer, it produces a small, hot flame which
|
||
ignites the main powder charge. Of the two systems, the percus-
|
||
sion cap system (also called a "caplock system") is the least
|
||
complicated and the least susceptible to to the effects of
|
||
dampness.
|
||
|
||
Check the action of your firearm's hammer group (called
|
||
"locks"), especially in muzzle loading shotguns. If performance
|
||
is doubtful, take it to a gunsmith who knows muzzle loading
|
||
locks. Poor locks are a decided menace to shooters and spectators
|
||
alike.
|
||
|
||
LOADING PROCEDURE FOR RIFLE AND SINGLE SHOT PISTOL
|
||
|
||
1. Check to be sure the firearm is empty and unprimed.
|
||
|
||
2. Pull the hammer back to the half-cock position.
|
||
|
||
3. Run a dry patch through the barrel to remove any
|
||
remaining oil.
|
||
|
||
4. When the shooting line is clear to handle your fire-
|
||
arms, place a percussion cap onto the nipple of the
|
||
caplock weapon and, with no powder or ball in the
|
||
firearm, fire it downrange. This dries the breech. On
|
||
flintlock firearms, place priming powder in the flash-
|
||
pan (again, with no powder or bullet in the barrel) and
|
||
fire the gun downrange to dry the breech of any mois-
|
||
ture or oil residue.
|
||
|
||
5. If using a rifle, put the butt of the rifle on the
|
||
ground between your feet, with the muzzle pointing away
|
||
from you.
|
||
|
||
6. Measure a charge of powder, level full without jarring
|
||
the powder measure.
|
||
|
||
7. Pour the measured charge into the barrel. Tap the side
|
||
of the barrel with your hand to settle the powder into
|
||
the breech.
|
||
|
||
8. Center a lubricated patch on the muzzle.
|
||
|
||
9. Place a round ball on the patch, with the sprue up.
|
||
|
||
10. Drive the patched ball into the barrel using a short
|
||
starter (bullet starter).
|
||
|
||
11. Using the ramrod, press the ball and patch all the way
|
||
down the barrel against the powder charge. Seat them
|
||
firmly with even pressure.
|
||
|
||
12. Remove the ramrod.
|
||
|
||
13. Cap or prime with powder.
|
||
|
||
14. Bring the hammer to the full-cock position.
|
||
|
||
15. Aim and fire.
|
||
|
||
DETERMINING POWDER CHARGES
|
||
|
||
Charge Tables were intentionally omitted from this document
|
||
because of the many variances to be found among arms available in
|
||
today's market. Here we again urge you to follow the manufactur-
|
||
er's suggestions. Should you seek advice from a reputable dealer
|
||
or Muzzle loading expert, be sure to have your firearm with you.
|
||
He will want to see the gun before advising you. Greater safety
|
||
with all firearms is a part of the National Muzzle Loading Rifle
|
||
Association's (N.M.L.R.A.) Platform. Therefore, assume nothing;
|
||
follow directions concerning powder charges as you become more
|
||
familiar with your firearm. Remember, SAFETY ALWAYS. In any
|
||
Muzzle Loading firearm MODERATE LOADS ARE MORE ACCURATE.
|
||
|
||
LOADING PROCEDURE FOR MUZZLE LOADING SHOTGUNS
|
||
|
||
1. Check to be sure the shotgun is empty and unprimed.
|
||
|
||
2. Pull the hammer back to the half-cock position.
|
||
|
||
3. Run a dry patch through the barrel to remove any
|
||
remaining oil.
|
||
|
||
4. When the shooting line is clear to handle your fire-
|
||
arms, place a percussion cap onto the nipple of caplock
|
||
weapon and, with no powder or ball in the firearm, fire
|
||
it downrange. This dries the breech. On flintlock
|
||
shotguns, place priming powder in the flashpan (again,
|
||
with no powder or bullet in the barrel) and fire the
|
||
gun downrange to dry the breech of any moisture or oil
|
||
residue.
|
||
|
||
5. Place the butt of your shotgun on the ground between
|
||
your feet, with the muzzle pointing away from you.
|
||
|
||
6. Measure a charge of powder, level full without jarring
|
||
the powder measure.
|
||
|
||
7. Pour the measured charge into the barrel. Tap the side
|
||
of the barrel with your hand to settle the powder into
|
||
the breech.
|
||
|
||
8. Place a wad over the powder charge, followed by a wet
|
||
fiber wad. The fiber wad must be moist to scrub,
|
||
lubricate and clean the bore, thus preventing barrel
|
||
fouling. Seat each wad firmly.
|
||
|
||
9. Pour a measured shot load into the barrel. Equal powder
|
||
and shot charges by volume work best.
|
||
|
||
10. Place the over-shot wad into the barrel and seat firmly
|
||
with the ramrod - don't pound the wad down.
|
||
|
||
11. Remove the ramrod.
|
||
|
||
12. Cap or prime with powder.
|
||
|
||
13. Pull the hammer(s) to the full-cock position.
|
||
|
||
14. Aim and Fire.
|
||
|
||
After firing one or both barrels of your shotgun, make it a
|
||
habit to always put the hammers into the half-cock position to
|
||
lessen the chance of an accidental discharge. If reloading one
|
||
barrel while other barrel is still loaded, REMOVE THE CAP from
|
||
the nipple of the loaded barrel to prevent an accidental dis-
|
||
charge of that barrel.
|
||
|
||
Shooting glasses should always be worn when shooting fire-
|
||
arms, especially muzzle loading firearms, to protect your eyes in
|
||
case of an accidental discharge or from a hot ember or piece of
|
||
cap. Remember, SAFETY ALWAYS.
|
||
|
||
LOADING PROCEDURE FOR THE MUZZLE LOADING REVOLVER
|
||
|
||
1. Make sure that the revolver is empty and unprimed.
|
||
|
||
2. Run a dry patch through the barrel and cylinder to
|
||
remove any remaining oil.
|
||
|
||
3. When the shooting line is clear to handle your fire-
|
||
arms, fire a percussion cap in each chamber WITHOUT
|
||
powder or bullets in the revolver to make sure every
|
||
nipple is clear of oil or powder fouling.
|
||
|
||
4. Pour measured powder into chamber.
|
||
|
||
5. Seat your ball (.001" to .002" over the cylinder bore
|
||
diameter) firmly down on powder. Try to apply same
|
||
pressure in loading each chamber. That even pressure
|
||
will yield consistent shots.
|
||
|
||
6. When all of the chambers are loaded, place grease over
|
||
the top of each ball. Use commercial lubes, Crisco, or
|
||
similar grease.
|
||
|
||
7. Cap each chamber nipple with a tight fitting cap.
|
||
Choose your caps wisely and make sure they fit well
|
||
(almost too tight) and that they break up uniformly and
|
||
completely when fired rather than merely enlarging.
|
||
|
||
8. Carefully aim and fire.
|
||
|
||
As an alternative to placing grease over the end of each
|
||
cylinder chamber, you may wish to use a greased or waxed felt wad
|
||
of approximately 1/8" thickness. This will go on top of the
|
||
powder charge, under the ball. Some competitive shooters will use
|
||
a filler of cornmeal, Cream of Wheat, or such (whichever shoots
|
||
best) on top of the small powder charge. This filler brings the
|
||
ball up flush with the end of the cylinder chamber and seems to
|
||
produce better accuracy than having the ball seated farther down
|
||
in the chamber. Grease is still required on top of the ball.
|
||
|
||
CLEANING
|
||
|
||
Hot, soapy water is excellent for cleaning your muzzle
|
||
loader. The commercial solvents are good too. Scrub the bore
|
||
until the patches come out clean and then dry and oil. Remove the
|
||
lock and carefully clean and oil all fouled surfaces. Pipe
|
||
cleaners or cotton swabs are good for this. Don't forget to do
|
||
the nipple area on caplocks or the vents on flintlocks.
|
||
|
||
|
||
HINTS AND CAUTIONS
|
||
|
||
1. Treat every gun as if it were loaded. NEVER point it at
|
||
anything you don't intend to shoot. NEVER handle a
|
||
firearm that you are not familiar with until properly
|
||
instructed by an expert. Remember, SAFETY ALWAYS.
|
||
|
||
2. NEVER pour powder directly from a horn or flask into a
|
||
gun - ALWAYS use separate measurers.
|
||
|
||
3. Treat a misfire or failure to fire with extreme care,
|
||
ESPECIALLY with flintlocks. Keep the gun pointed down
|
||
range and wait one (1) full minute before repriming.
|
||
|
||
4. Carry your tools on the hunt. (Ball puller, nipple
|
||
wrench, screwdriver, etc.) It may save the whole day.
|
||
|
||
5. If you are shooting a caplock and you ram home a
|
||
patched ball without powder, pull the nipple and you
|
||
can put enough (priming) powder behind the ball to
|
||
clear the barrel (fire it in a safe direction). If you
|
||
are shooting a flintlock and do the same thing, use the
|
||
ball puller. With a percussion shotgun, clear the load
|
||
as you would a percussion rifle. With a flintlock
|
||
shotgun, however, clear the gun by pulling the load out
|
||
using a worm tool.
|
||
|
||
6. NEVER, BUT NEVER, drink alcoholic beverages or smoke
|
||
around black powder or Pyrodex powders.
|
||
|
||
7. NEVER, BUT NEVER, use drugs in any form, whether they
|
||
be stimulants or depressants and then attempt to handle
|
||
firearms. Blurred vision, loss of concentration, losing
|
||
track of time, loss of desire to improve and extreme
|
||
agitation are just some of the debilitating effects of
|
||
drugs to a shooter's ability, health and safety.
|
||
|
||
8. A little butcher's wax on the wood around the lock area
|
||
will help protect it against burning from your caps or
|
||
pan flash.
|
||
|
||
9. Drop your ramrod down the empty barrel of your rifle,
|
||
shotgun, or single shot pistol and mark it at the
|
||
muzzle. Now you can always gauge if the gun is loaded,
|
||
or it the barrel is obstructed.
|
||
|
||
|