19 lines
1.0 KiB
Plaintext
19 lines
1.0 KiB
Plaintext
-------------------------------
|
|
How To Drill A Pin Tumbler Lock
|
|
-------------------------------
|
|
|
|
Sometimes a malfunction in the lock will prevent it from being picked.
|
|
Drilling a pin tumbler lock is a less destructive means of opening the lock
|
|
without the key than forcing the cylinder. Almost any type of drill may be
|
|
used, including a hand operated drill, but the small one-quarter-inch electric
|
|
drill is faster. The bit size is not of great importance, but the small bit
|
|
will make the task easier when using a hand drill. Normally a 1/16 to 1/32-inchtwist steel drill bit will do the job.
|
|
|
|
Make the hole just above the lower tumbler pins near the shear line. Once thehole is drilled to approx- imately one and a half inches, take a tension wrench
|
|
and turn the plug toward the unlocked position. If the plug refuses to turn,
|
|
take a thin stiff section of wire and push the upper pins above the shear line
|
|
to rotate the lock open.
|
|
|
|
Call The Works BBS - 1600+ Textfiles! - [914]/238-8195 - 300/1200 - Always Open
|
|
|