91 lines
2.8 KiB
Plaintext
91 lines
2.8 KiB
Plaintext
Gold Box Plans by The Jolly Roger
|
|
|
|
|
|
HOW TO BUILD IT
|
|
_______________
|
|
|
|
|
|
You will need the following:
|
|
|
|
Two 10K OHM and three 1.4K OHM resistors
|
|
Two 2N3904 transistors
|
|
Two Photo Cells
|
|
Two Red LED'S (The more light produced the better)
|
|
A box that will not let light in
|
|
Red and Green Wire
|
|
|
|
Light from the #1 LED must shine directly on the photocell #1. The gold
|
|
box I made needed the top of the LED's to touch the photo cell for it to
|
|
work.
|
|
|
|
The same applies to the #2 photo cell and LED.
|
|
|
|
1
|
|
:-PHOTOCELL--:
|
|
: :
|
|
: :BASE
|
|
: 1 TTTTT
|
|
: +LED- TRANSISTOR
|
|
: TTTTT
|
|
: : :
|
|
: -I(-- : :COLLECTOR
|
|
RED1--< >:--: :-------:-----GREEN2
|
|
-I(-- : ----------:
|
|
: :
|
|
2 :-/+/+/-/+/+/-/+/+/-/+/+/
|
|
LED 10K 10K 1.4K 1.4K
|
|
RESISTORES
|
|
|
|
2
|
|
-PHOTOCELL-----------------
|
|
: :
|
|
:BASE :
|
|
TTTTT :
|
|
TRANSISTOR :
|
|
TTTTT :
|
|
: :EMITTER :
|
|
GREEN1- --------------------------RED2
|
|
: :
|
|
/+/+/
|
|
1.4K
|
|
|
|
The 1.4K resistor is variable and if the second part of the gold box is
|
|
skipped it will still work but when someone picks up the phone they will
|
|
hear a faint dial tone in the background and might report it to the
|
|
Gestapo er...(AT&T).
|
|
1.4K will give you good reception with little risk of a Gestapo agent at
|
|
your door.
|
|
|
|
|
|
Now that you have built it take two green wires of the same length and
|
|
strip the ends, twist two ends together and connect them to green1 and
|
|
place a piece of tape on it with "line #1" writing on it.
|
|
|
|
Continue the process with red1 only use red wire. Repeat with red2 and
|
|
green2 but change to line #2.
|
|
|
|
|
|
|
|
|
|
|
|
HOW TO INSTALL
|
|
______________
|
|
|
|
You will need to find two phone lines that are close together. Label one of
|
|
teh phone lines "Line #1". Cut the phone lines and take the outer coating
|
|
off it. Tere should be 4 wires. Cut the yellow and black wires off and
|
|
strip the red and green wires for both lines.
|
|
|
|
Line #1 should be in two pieces. Take the green wire of one end and connect
|
|
it to one of the green wires on the gold box. Take the other half of line
|
|
#1 and hook the free green wire to the green wire on the phone line. Repeat
|
|
the process with red1 and the other line.
|
|
|
|
All you need to do now is to write down the phone numbers of the place you
|
|
hooked it up at and go home and call it. You should get a dial tone!!!
|
|
If not, try changing the emittor with the collector.
|
|
|
|
|
|
Have a great time with this! -----------Jolly Roger
|
|
|