textfiles/anarchy/INCENDIARIES/pillbomb.txt

1165 lines
35 KiB
Plaintext

Pill Bottle Bombs
Chemicals:
1. Potassium Perchlorate
2. Aluminum Powder
Materials:
1. Plastic Bowls And Spoons
2. High Quality Measuring Scale
3. Plastic Pill Bottle
4. Safety Fuse
5. Drill Of Some Sort
Procedure:
1. Drill A Hole Through Top Of Pill
Bottle For Fuse.
2. Cut Good Length Of Safety Fuse And
Stick It Through The Hole, Tieing
One End To Secure It.
3. Measure Chemical On A Scale To This
Ratio:
2 Parts Potassium Perchloride To
1 Part Aluminum Powder
4. Mix Chemicals In Bowl, Being Careful
To Avoid Friction.
5. Fill Pill Bottle 1/3 Full With The
Powder.
Detonation:
Test In Open Field At Least 100
Yards From Anything You Wanna Keep.
Pill Bottle Bomb ][
[20-30 Times Stronger]
Chemicals:
1. Flash Powder (Made Above)
2. Potassium Chlorate
3. Vaseline
Materials:
1.Pill Bottle Bombs
2.Plastic Mixing Bowl
3.Plastic Gloves
Procedure:
1. Measure By Volume
9 Parts Powdered Potassium Chlorate
1 Part Vaseline
2. Mix Ingredients Together In Bowl,
Kneeding With Hand Until Entire
Mixture Is Same Consistently.
3. Open 1 Pill Bottle, Pack Bottom
1/3 Full With Mixture.
4. Fill In On Top Of Plastic Another
1/3 Of Bottle With Flash Powder
(Made For Pill Bottle)
Detonation: Same As Pill Bottle Bomb
#1, Except Much More
Powerful.
Time Bomb
Materials:
1. Empty Milk Jug (1 Gallon Kind)
2. Can Of Gasoline
3. Working Light Bulb
4. Light Socket With Cord
5. Wind Up Alarm Clock
6. Finishing Nail
7. Wire
Procedure:
1. Fill Milk Jug To The Top With Gas.
2. Break Glass Of Ligh Bulb; Careful
Not To Break The Filiment.
3. Screw The Light Bulb Into The Light
Socket.
4. Put The Filimen Of The Bulb Into The
Milk Carton And Tape It.
5. Take Off Covering In The Face Of The
Clock.
6. Hammer The Finishing Nail Into The
12 On The Clock Half Way In.
7. Cut One Of The Wires That Goto The
Light Bulb Socket.
8. Wrap One Of The Wires Around The
Nail.
9. Wrap The Other Wire Aaround The Big
Hand Of The Clock.
10. Plug The Light Fixture & Clock In.
(Careful, Ake Sue The Big Hand Is
Not Touching The Nail)
11. Move The Big Hand So You Have A
Certain Amount Of Time Till It
Goes Off.
Imagine This. A Great, Inflated, Green Garbage Bag
Slowly Wafting Down From A Tall Building. It Gains Some Speed
As It Nears The Ground. People Look Up And Say, "What The....?"
The Garbage Bag Hits! *Boom!!!* It Explodes In A Thundering
Fireball Of Green Bits Of Plastic And Flame!
"What Is This?" You May Ask. Well, This Is The Great
"Acetylene Balloon Bomb." And Here Is How To Make It.
Ingredients:
============
(1> For A Small Bomb: A Plastic Bag. Not Too Big.
For Something Big(Ger): A Green, Plastic Garbage Bag.
(2> Some "Fun-Snaps". A Dozen Should Be More Than Enough.
(3> Some Garbage Bag Twisties. String Would Also Do.
(4> A Few Rocks. Not Too Heavy, But Depends On Size Of
Bomb And Desired Velocity Of Balloon/Bomb.
(5> Prime Ingredient: Acetylene. This Is What Is Used In
Acetylene Torches. More On This Substance Later.
(6> One Or More Eager Anarchists.
Notes:
======
Acetylene Is A Fairly Dangerous Substance. It Is Unstable Upon
Contact With Oxygen (Air). For This Reason, And For Your
Safety, I Recommend You Keep All Of The Acetylene Away From Any
Source Of Oxygen. This Means Don'T Let It Get In Touch With
Air.
Construction:
=============
(1> Fill Up A Bathtub With Cold Water. Make It Very Full.
(2> Now Get Put You Garbage Bag In The Water And Fill It
With Water. Make Sure All Air/Oxygen Is Out Of The
Bag Before Proceeding.
(3> Now Take Your Acetylene Source (I Used It Straight
From The Torch, And I Recommend This Way Also.), And
Fill The Bag Up With Acetylene.
(4> Now, Being Careful With The Acetylene, Take The Bag
Out Of The Tub And Tie The Opening Shut With The
Twisty Or String. Let The Balloon Dry Off Now. (Put
It In A Safe Place.)
(5> Okay. Now That It Is Dry And Filled With Acetlene,
Open It Up And Drop A Few Rocks In There. Also Add
Some Fun-Snaps. The Rocks Will Carry The Balloon
Down, And The Fun-Snaps Will Spark Upon Impact, Thus
Setting Off The Highly Inflammable Acetylene.
*Baboom!*
(6> Now Put The Twisty Or String Back On Very Tightly.
You Now Have A Delicate But Powerful Balloon Bomb.
To Use:
=======
Just Drop Off Of A Cliff, Airplane, Building, Or Whatever. It
Will Hit The Ground A Explode In A Fireball. Be Careful You Are
Not Near The Explosion Site. And Be Careful You Are Not
Directly Above The Blast Or The Fireball May Rise And Give You
A Few Nasty Burns.
Have Fun!
Toxic Gas Devices
----- --- -------
Soda Bomb
Materials:
1 Box Granulated Pool Chlorine
1 Bag Of Sugar
1 Bucket Water
1 2-Liter Soda Bottle Or Other Glass
Bottle
1 Small Glass Jar With Metal Lid
Directions:
Make A Mixture Of The Following:
50% Chlorine
50% Sugar
Put Mixture Into Soda Bottle. Then
Fill The Glass Jar With Water And Put
It Into The Soda Bottle.
Detonation:
Throw This At A Hard Surface, It
Creats An Explosion, And At The
Same Time, Releases Very
Harmful Fumes.
Deadly Fume Bomb
Materials:
1 Large Explosive (M-80 Or Greater)
1 Large Cylindrical Cardboard
Container Such As Kool Aid Drink
Mix
4 Cans Comet Cleaner
1 Roll Of Black Electrical Tape
Directions:
Fill Container Half-Way Full With
Comet Cleanser. Nestle Explosive On
The Cleanser. Pour More Cleanser On
And The Explosive Until The Container
Is Full; Leave Explosive Wick
Sticking Out Above Comet.
Stick Fuse Through Plastic Top.
Tape Plastic Lid To The Container
Tightly.
Detonation:
To Ignite, Light Fuse And Get Away.
The Bomb Will Explode And Fill The Air
With Gaseous Poison.
Chlorine Gas
Materials:
1 2-Liter Bottle
1 Measuring Cup
1 Bottle Of Chlorox Bleach
1 Bottle Of Amonia
Directions:
Pour 1/2 Cup Of Chlorax Into The
Bottle. Pour 1/2 Cup Ammonia Into The
Bottle. Quickly Screw On The Cap And
Throw The Bottle Far Away.
When The Bottle Hits The Ground The
Cap Should Blow Off Releasing A
Highly Toxic Cloud Of Deadly Fumes.
Unstable Explosives
Ingredients: A Glass Jar
Amonia (Like The Kind
Used On Floors)
Iodine (Hightest Conc.
You Can Find)
Directions:
Pour A Lot Of Amonia In Bottle. Add All Of The Idodine. (Try And Get At Least
A 95% Solution Of Iodine) A Lot Of White Crap Will Start To Separate And Form
At The Bottom. Pour Out The Excess Liquid Out And Scrape The White Crap Out.
As Soon As This White Stuff Is Dried When You Apply The Least Amount Of
Pressure, It Will Blow Up!
Unstable Expolsive #2
Mix Solid Nitric Iodine With House- Hold Ammonia. Wait Overnight And You Will
Be Left With A Muddy Substance. Let This Dry Till It Hardens. Then Throw It
At Something.
Chapter The First: A Short Introduction
Well, This Bomb Was Constructed By Us In An Attempt To Not Only Make An
Antipersonnel Device Which Was Easy To Construct, But Also To Create The
Biggest Fireball That The World Has Ever Seen. So, You Get The Power Of Pure
Butane, With The Added Advantage Of Simplicity In Construction...Have Phun!
_____________________________________________________________________________
Chapter The Next: Materials Required
_____________________________________________________________________________
1. A Cannister Of Butane Fuel: Easy To Obtain, This Can Be Found At Just
About Any Good Drugstore, Certainly At A Hardware Store.
2. Gun Powder: Not All That Tough To Get Ahold Of, Either Find A Phile
Telling You How To Construct It By Hand, Or Snag Some Shotgun Shells
At K-Mart And Empty The Powder Out Of Them. You Can Use Firecrackers
Instead Of Shotgun Shells, But You'Ll Need A Sufficient Amount Of
Powder, So Unless You Want To Spend Five Years Emptying Firecrackers,
Stick To The Shells.
3. Plastic Container: Preferably A Tupperware-(Tm) Glass, As It Will Bot
Melt Away And Explode, While Glass Will Shatter With Heat, And Metal
Will Not Explode.
4. A Fuse: You Can Buy These In Places, But If You Don'T Want To Go Thru
The Hassle, Simply Rub Model Glue All Over A String, It'Ll Work Just
As Well.
5. Masking Tape: Or Electrical Tape, Or Cellophane Tape, Or Whatever Kin
Of Tape That You'Ve Got Lying 'Round The House.
_____________________________________________________________________________
Chapter The Third: Assembly
_____________________________________________________________________________
1. Fill The Plastic Container With 1/4 To 1/2 Inch Of Powder.
2. Center The Butane In The Container, Atop The Powder.
3. Fill The Rest Of The Container With Powder, Around The Butane. Pack
It Down -- Lightly, Just So That It Fully Fills In The Container.
4. Insert The Fuse At Least 1/2 Inch Into The Powder, And Pack The
Surrounding Powder As In Step 3. Seal The Top Of The Container Aroun
The Butane With A Small Covering Of Masking Tape.
5. Plant The Device In A Target Area.
6. Light The Fuse, And...
7. Run Like Hell!!
8. (Detonation): If This Is Done Correctly, And You Get Well Out Of Rang
Of The Fireball, The Immediate, (And Non-Immediate), Area Will Be "Up
In Smoke," Persay.
_____________________________________________________________________________
A Diagram Of Proper Construction
_____________________________________________________________________________
__! Butane !
/ ! Cannister !
>*< _ /
! ! ! /
\ _! !_ __! Tape !
! Bomb !______! / \ / ! Covering !
! Fuse ! _!_! !___/
!.!.! !.:.!
!:!:!_______!:.:!_
!.!.! !.:.! \
!:!:! Ronco !:.:! \__! Plastic !
!.:.!_______!.:.! ! Container !
!:.:! !:.:!
!.:.! !.:.!
!:.:! !___!______! Notice The "Designer" !
!_:.!_______!.:.! ! Butane Fuel, Here! !
! Gun !__/!:.:.:.:.:.:.:.:!
! Powder ! !_______________!
^^ Please Take Into Account That
I'M No Artist...Text Is A Bitch.
_____________________________________________________________________________
(+) Have Fun!! (+)
_____________________________________________________________________________
Letter Bombs Are Very Simple To Make, But The Difficult Part Is Making Sure It
Will Detonate Properly, Or That It Is Not Obvious That It Is A Bomb.
Mixtures:
About 75% Aluminum Powder With 25% Iron Power Is Best. This Is A Light Version
Of Thermite, Since It Is In An Enclosed Space (The Envelope, As Described Below
A Ways). Mix The Above Well. The Idea Is This: Iron Can Burn, At A Very High
Temperature, But It Needs A Little Help. This Is What The Aluminum Is For.
Aluminum Burns At A Relatively Low Temperature, So It Is Used As A Catalyst Of
Sorts. Magnesium Is Used To Flash-Ignite The Aluminum, Which Then Burns The
Iron, At A Suitable Temperature. Since This Is Going Off In An Enclosed Space,
It Will Burn Much Hotter And Slower And With More Violence Than A Normal Mix.
I Advise You Play With This For A While, Learning Your Mixture.
Now For The Fun Stuff:
Get An Insulated (Padded) Envelope, The Type That Is Double Layered. Seperate
The Layers. In The Inner Layer Goes The Wonderful Mixture, One You Are
Satisfied With. Keep This Section Seperate, But It Might Be Handle To Top It
Off With Some Magnesium. The Outer Layer Can Be Either Magnesium, For A Flash
Bomb, Or Possibly A Material Of Your Own Choice.
Now For The Difficult Part!
The Fuse... We Can Make A Fuse From Another Set Of Chemicals: Iodine Crystals,
And Amonium Hydroxide, In Liquid Form. Mix These Together, In About And Equal
Amount, But You Might Want To Use A Heavy Amount Of Iodine If Pressed For Time.
These Form A New Crystalline Structure, About And Inch Long. These Are Highly
Volatile, And I Advise Keeping Them Protected. They Have About The Impact
Power Of An M-100 For A Teaspoon. I Put These In A Protective Card-Board
Lining, And Put Them At The Top Of The Envelope. Rig This So It Puts Pressure
On The Crytals When The Package Is Opened, But Not From Just Squeezing The
Envelope. This Is Tricky, And I Can'T Explain It Here. Seal This Up, And You
Have A Working Letter Bomb. By The Way, Since The Bulk Of Letter Bombs Are
Easily Recognizable, They Rarely Make It Past The Post Office.
*****
I Frown Upon The Use Of Letter Bombs As A Means Of Getting Even Because You
Never Know Who It Is Going To Detonate Around, Or That It Will Even Be Them.
There Are Simpler Ways Of Getting Even, So Take One Of Them. It Is Also A
Federal Offence To Make And Send One. Procede At Your Own Risk.
*****
How To Avoid Letter Bombs: Since You Made It This Far Into The File, I Will
Tell You How To Avoid Being Detonated With A Letter Bomb You May Have Had Sent
To You. 1) Never Open A Letter Bomb The Way It Wants To Be Opened! This Is
The Way Of Possibly Avoiding The Fuse. If It Is Set To Detonate On Contact
With Air, Then This Will Not Work. 2) Don'T Squeeze, Bend, Or Anything! 3) If
It Looks Like A Bomb, Then Don'T Even Touch It! This Is The Best Way To Avoid
Problems!
How To Make:
T.N.T
---------------------------------------
Mix 170 Parts Tolulene With 100 Parts Acid. The Acid Made Of 2 Parts Of 70%
Nitric And 3 Parts Of 100% Sulfuric. Mix Below 30 Degrees.Set This For 30 Min
And Let It Separate. Take The Mononitrotolulene And Mix 100 Part Of It With
215 Parts Of Acid. This Acid Is 1 Part Pure Nitric And 2 Parts Pure Sul Furic.
Keep The Temp. At 60-70 While They Are Slowly Mixed. Raise Temp To 90-100 And
Stir For 30 Min. The Di- Nitrotoluene Is Separated And Mix 100 Parts Of This
With 225 Parts Of 20% Oleum Which Is 100% Sulfuric With 20% Extra Dissolved
Sulfur Trioxide, And 65 Parts Nitric Acid. Heat At 95 Degrees For 60 Min. And
Then At 120 Degrees For 90 Min.Separate The Trinitrotoluene And Slosh It Around
In Hot Water. Purify The Powder By Soaking It In Benzene.
::::::::::::::::::::::::::::::::::::::
How To Make And Use Nitroglycerin.
::::::::::::::::::::::::::::::::::::::
Ch2Ono2
! 3/2 N2 + 3 Co2
Chono2 ----------> +
! Ignition 5/2 H2O + 1/4 O2
Ch2Ono2
(How Nitro Explodes--Note That The Byproducts Are Nothing But Nitrogen, Carbon
Dioxide, Water And Oxygen)
::::::::::::::::::::::::::::::::::::::
Nitroglycerin [Heretofore Nitro] Is A Very Powerful High- Explosive. I Am Not
Sure Who Invented It But He Probably Didn'T-- The First Person To Make It
Probably Blew Himself Up And His Freind Got The Info Off His Notes. Well
Anyway, The Next Best Thing To Nitro Is Tnt Which Is Ten Times Harder To Make
But Also Ten Times Safer To Make. If You Can'T Use Nse Then Dont Even Try To
Make This Stuff--A Few Drops Can Bbcircumstances.
::::::::::::::::::::::::::::::::::::::
To Make Nitro:
== ==== ======
Mix 100 Parts Fuming Nitric Acid (For Best Results It Should Have A Specific
Gravity Of 50 Degrees Baume') With 200 Parts Sulphuric Acid. This Is Going To
Be Hot At First--It Won'T Splatter If You Pour The Nitric Into The Sulphuric
But Don'T Try It The Other Way Around. The Acid Solutions Together Can Disolve
Flesh In A Matter Of Seconds So Take The Proper Measures For God'S Sake!!!
When Cool, Add 38 Parts Glycerine As Slowly As Possible. Let It Trickle Down
The Sides Of The Container Into The Acids Or It Won'T Mix Thourily And The
Reaction Could Go To Fast--Which Causes Enough Heat To Ignite The Stuff. Stir
With A **Glass** Rod For 15 Seconds Or So Then Carfully Pour It Into 20 Times
It'S *Volume* Of Water. It Will Visibly Precipitate Immediatly. There Will Be
Twice As Much Nitro As You Used Glycerin And It Is Easy To Separate. Mix It
With Baking Soda As Soon As You Have Separated It-- This Helps It Not To Go Off
Spontainously.
::::::::::::::::::::::::::::::::::::::
Notes: Parts Are By Weight And The Baume' Scale Of Spicific Gravity Can Be
Found In Most Chem. Books. You Can Get Fuming Nitric And Sulfuric Acids
Wherever Good Chemicals Or Fertilizers Are Sold. It Is Positivly *Stupid* To
Make More Than 200 Grams Of Nitro At A Time. When Mixing The Stuff Wear
Goggles, Gloves, Etc. When I First Made The Stuff I Had The Honor Of Having It
Go Off By Itself (I Added Too Much Glycerine At A Time.) I Was Across The Room
At The Time, But I Felt The Impact--So Did The Table It Was On As Well As The
Window It Was Next To--They Were Both Smashed By Only 25 Grams In An Open Bowl.
Oh, Yes, Glycerine You Can Get At Any Pharmacy And You Need An Adult Signature
For The Acids. Any Bump Can Make Nitro Go Off If You Don'T Add The Bicarbonate
Of (Baking) Soda--But Even With That, If It Gets Old I Wouldn'T Play Catch With
It.
::::::::::::::::::::::::::::::::::::::
Once You Have Made The Nitro And Saturated It With Bicarb. You Can Make A
Really Powerful Explosive That Won'T Go Off By Itself By Simply Mixing It With
As Much Cotton As You Can And Then Saturating That With Molten ((Parifine--Just
Enough To Make It Sealed And Hard. Typically, Use The Same Amounts (By Weight)
Of Each Nitro, Cotton And Parifine. This, When Wrapped In Newspaper, Was Once
Known As "Norbin & Ohlsson'S Patent Dynamite," But That Was Back In 1896.
Thermite Is A Powerful Substance Which Can Burn Through Practically Anything,
Save Tungsten. It Is Especially Of Use In Trying To Crack Open A Fortress
Fone. Now Here'S How You Make It. It Is Very Simple.
The First Step In Making Thermite Is To Make Hematite. In Layman'S Terms,
Hematite Is Iron Oxide (Rust). Here Is A Good Method Of Making Large
Quantities Of Rust. Ou Will Electrolyze A Metal Rod, Such As A Common Nail.
You Will Need A Source Of Dc Power As Well. An Electric Train Transformer Is
Perfect. Attatch Therod To The Positive Wire.
Then Place The Rod And The Negative Wire In Opposite Sides Of A Glass Jar
Filled With Water. Put A Little Salt In The Water, Just Enough To Make It
Conduct Well (A Teaspoon). Let The Setup Sit Overnight. In The Morning, There
Will Be A Dark Red Crud In The Jar. Filter All The Crud Out Of The Water Or
Just Fish It Out With A Spoon. Now You Will Need To Dry It Out. Heat It In An
Iron Pot Untill It All Turns A Nice Light Red.
The Other Ingrediant You Will Need Is Aluminum Filings. You Can Either File
Down A Bar Of Aluminum, Or (As I Suggest) Buy Aluminum Filings At Your Local
Hardware Shop. (If You Buy The Bar Use No Less Than 94% Pure Aluminum. It Is
Called Duralumin.) That'S Almost It. Now, Mix Together The Rust And Aluminum
Filings. The Ratio Should Be 8 Grams Of Rust Per 3 Grams Of Aluminum Filings.
That'S Thermite!
Now, To Light It! Stick A Length Of Magnesium Ribbon In A Pile Of The
Thermite. (Either Steal It From Chem Lab Or Buy It At Your Local Hardware
Store. If Not, Order From A Chemical Supply House. It'S Pretty Cheap.) The
Ribbon Should Stick Into The Thermite Like A Fuse. Now You Light The Magnesium
With A Blowtorch. (Don'T Worry. The Torch Isn'T Hot Enough To Light The
Thermite.) When The Burning Magnesium Reaches The Thermite, It Will Light.
When The Thermite Burns, Get The Hell Back! That Stuff Can Vaporize Carbon
Steel. It Does Wonders On Human Flesh.
= --==> Cone Shaped Charges <==-- =
This Phile Will Discuss The Simple Techniques For A Method The Cia And
Mercenaries Who Lack Heavy Demolition Material Have Used For Years To Attack
Armored Vehicles.
Shock Waves From A Detonating Block Of Explosive Emerge In All Directions
Creating A Generalized Blast Effect. It Is Possible, However, To Shape An
Explosive Charge In Such A Way That A Portion Of The Shock Waves Will Be
Focussed And Concentrated On A Very Small Area, Thereby Creating A Very
Powerful Puncturing Or Drilling Action. When The Charge Is Detonated Against
The Side Of A Tank, The Shock Waves Emerging From The Conical Cavity Are
Focussed On One Spot Where They Will Penetrate Several Inches Of Steal.
We Will Discuss Two Different Ways Of Making Cone Shaped Charges :
<1> Martini Glass
<2> Wine Bottle
Martini Glass Cone Shaped Charge
================================
You Will First Need The Following
Materials To Construct This Charge :
<1> Martini Or Wine Glass
<2> Tube (Cardboard Or Similar)
<3> Sticks (3-4)
<4> Tape
<5> Explosive (Preferably Plastic...
See G-File With That Title)
Preparation
-----------
<1> File A Notch Around The Stem Where
The Cup Part Meets The Stem And
Then Break It Off.
<2> Place The Glass Upside Down In The
Container. Unless The Glass Is
Wedged Firmly, Tape It To Hold It
In Place.
<3> Pack The Explosive Behind The Glass
Tamping It Carefully To Provide
Good Density. For Best Results
The Explosive Should Be No Closer
To The Mouth Of The Glass Than
The Point Where It Was Cut.
(See Diagram)
<4> Tape The Whole Charge To Assure It
Remains In Firm Condition.
Diagram Of Complted Charge
--------------------------
Key
---
= = Container Outline
\ = Martini Glass (Top Part)
* = Explosive Charge
# = Blasting Cap Or Fuse
= Separation Between Explosive And Glass.
=================================
=\ !****************** = =\\ !****************** =
=\\\ !****************** = =\\\\ !******************####
=\\\\\!******************######## =\\\\ !******************####
=\\\ !****************** = =\\ !****************** =
=\ !****************** = =================================
Notice The Spce Between The Cone- Shaped Glass And The Explosive. This Allows
Area For The Charge To Focuss And Is Quite Important To Its Success.
Here Is A Diagram Demonstrating How To Place The Explosive On Its Target :
Diagram Of Placed Charge
------------------------
========
=******=
Explosive ==> =******=
=******=
= .. =
Glass ==> = .... =
^=......=^
^========^
Support ==>^^ ^^ ^^
Tripod ^^ ^^ ^^
\\\\\\\\\\\\\\\\\\\\
\\\\\\ Target'S Armored \\\\\
\\\\\\\\ Surface \\\\\\\
\\\\\\\\\\\\\\\\\\\\
The Support Tripod Shown Should Roughly Place The Explosive Some 4-5 Inches
Above The Target'S Surface To Maximize Penetration. This Is Again Following
The Same Principle As Placing The Explosive Totally Behind The Cone.
Wine Bottle Shaped Charge
=========================
If You Can Find A Wine Bottle With A Dome Shaped Bottom (Not The Mouth) You Can
Make A Quite Effective Charge From It Also.
Materials
---------
<1> Wine Bottle With Cavity Base
<2> Tublular Container
<3> Sticks
<4> Tape
<5> Shoelace
<6> Gasoline
<7> Bucket Of H2O
<8> Explosive
Procedure
---------
<1> Remove All Labels From Bottle.
<2> Soak Shoelace In Gas
<3> Tie String Around The Bottle Where
You Wish To Cut It. (Anywhere
Below Neck)
<4> Grasp The Bottle By The Neck,
Light The String, And As String
Burns Rotate Glass Horizontaly.
<5> When The Burning Begins To Die
Plunge The Bottle Into The H2O.
<6> The Bottle Should Crack Easily
Along Where The String Was Tied.
(Good Glass Cutting Method)
<7> Cover The Remaining Sharp Edges
With Rags To Make It Easier To
Handle.
<8> Use Wine Bottle Bottom Just Like
The Win Glass In The First Part.
This Concludes This Little Phile On Shaped Charges. Look For Other Lod Philes
Written By Me (Dr. Doom) And By My Coleques. The Doom Wares Trademark Rests
(Origionally Anyway) On All Our Philes.
The Writer Of This Phile, Dr. Doom, Can'T In Any Way Be Held Responsible For
The Misuse Of Any Info Provided In The Phile. This Phile Has Been Produced For
Novelty And Informational Purposes Only And The Actual Use Of Its Contents Is A
Violation Of Phederal Law....(Oooooohhhhhh...)
=======================================
This Has Been A
Legion Of Doom/Association
Production
Lodlodlod
L L
O *** *** O
D *** *** D
L L
O *** O
D *** D
L L
Olodo
D D D
----------------
- Mini Grenade -
----------------
This Simple Experiment Designed By The Famous Captain Coco, Is A Very Small
Grenade Like Device That Will Put Two Rounds Of Shrapnel Into The Air.
Materials:
----------
2 Bolts (Same Size)
1 Nut (Fits Bolts)
4 Packs Matches
Instructions
------------
1) Scrape The Tips Off The Matches
2) Screw The Nut Onto A Bolt So That
Less Than Half The Nut Is Actually
Touching The Bolt.
3) Place Match Tips In Hole Formed By
The Nut.
4) Screw The Second Bolt Onto The Free
End Of The Nut, Trapping The Match
Tips Between The 2 Bolts.
This Device Explodes On Impact, With A Small Explosion That Throws The Bolts In
Two Diffrent Directions At A High Speed.
-------------
- Land Mine -
-------------
This Is A Simple Land Mine Designed By Agent Usa.
Materials:
----------
1 M-80 (Or Another Explosive)
3 Wires(Copper Will Do Nicely)
1 9-Volt Battery
1 Solar Igniter
1 Pressure Switch
Instuctions:
------------
1) Connect Wires From Battery To Switch
To Solar Igniter To Battery.
2) Replace Fuse On M-80 With Solar
Igniter
3) Hide Device Under A Light Coat Of
Dirt.
4) Place Switch In The Path
When The Switch Is Pressured The Bomb
Will Go Off.
--------------------
- Trap Light Bulbs -
--------------------
This Is A Method For Turning A Reg
Lightbulb Into A Bomb.
Materials:
----------
The Light Bulb You Wish To Explode
A Small But Powerful Torch
A Gallon Og Gasoline
A Tube Of Epoxy Glue
And Liquid Soap
Instuctions:
------------
1) Remove The Lightbulb From It'S
Proper Place.
2) Place A Hole In The Lightbulb (See
Below).
*
---
[ ]
[ ]
*[ ]*
[ ]
[ :
[ :
[---]
*- Mark Where Hold May Be Placed.
3) Carefully Pour Some Gasoline Through
The Hole. (1/2 Of The Bulb)
4) Carefully Pour Some Liquid Soap In
The Whole (1/2 Of The Bulb)
5) Cover The Whole With Epoxy Glue And
Let Dry.
6) Make Sure Switch Is Off And Screw
The Bulb In.
When The Switch Is Turned On, The Bulb
Will Explode Sending Sharp Fragments Of
Glass All Over. Deadly.
---------------
- Pipe Bomb -
---------------
This Is A Simple Pipe Bomb.
Materials:
----------
1 Threaded Steel Pipe With Caps On The
Ends.
1 Baby Food Or Other Small Jar.
X Some Vinegar
1 Small Torch
X Some Small Rocks
X Some Baking Soda
Instructions:
-------------
1> Fill Glass Jar With Vinegar.
2> Fit Glass Jar Into Steel Pipe.
3> Cap One End Of The Pipe.
4> Weld The Cap On The Pipe.
5> Drop Small Rocks Into Pipe.
6> Fill Pipe With Baking Soda.
7> Screw The Other Cap On Tightly
And Then Weld It Shut.
This Is Usally Used As An Impact
Explosive, Toss It Onto A Hard Suface
The Contact Will Break The Jar, Five
To Ten Minutes Later, It'Ll Explode.
-------------------
- Nitro Explosive -
-------------------
Make A Solution Of:
-------------------
65% Nitric Acid
20% Gliceren
15% Sulfuric Acid
This Should Explode By Heat, Impact
Or Fuse. It Is A Very Powerful Explo-
Sive Mixture.
--------------------
- Thermite -
--------------------
Thermite Is A Very Powerful Explosive.
Materials:
----------
1 Metal Rod
1 Transformer (Dc Power Supply)
1 Jar Of Aluminum Filings
1 Iron Pot
1 Blow Torch
1 Strip Of Magnesium Ribbon
And Some Commen Household Salt.
Instructions:
-------------
1> Attach Postive Wire From Transformer
To The Rod.
2> Place The Rod And The Negative Wire
In A Glass Of Water. (Not Touching)
3> Add Some Salt
4> Wait 24-36 Hours
5> Filter Rust From Glass
6> Heat Rust In An Iron Pot Until A
Light Red Color.
7) Make A Mixture Of:
75% Rust
25% Aluminum Filings
8> Place Magnesium Ribbon With Thermite
In Some Kind Of Container.
Now To Light This Explosive Just Use
The Torch To Ignite The Magnesium Strip
And The Whole Thing Will Explode.
----------------
- Carbide Bomb -
----------------
This Is A Simple But Powerful Carbide
Bomb.
Materials:
----------
Calcium Carbide
Tin Coke Can
Rubber Cement
Water (H2O)
Medium Sized Test Tube (That Will Fit
In The Can)
A Cork (Wider Than The Mouth Of Can)
A Sharp Knife
Instructions:
-------------
Put Calcium Carbide In Can, Filling It 1/4 Of The Way. Fill The Test Tube With
Water And Place The Tube Inside The Can. Take The Cork And Fit It On The Test
Tube. Use The Knife To Wittle It Down To A Proper Size.Once The Cork Is In
Place Seal The Top Of The Can With Rubber Cement.
To Ignite This Very Powerful Exlosive Just Throw It, When The Tube Breaks A
Very Big Boom Will Be Formed. This Is Very Volatile.
--------------------
- Deadly Fume Bomb -
--------------------
This Bomb Produces Both A Explosion
And Deadly Fumes.
Materials:
----------
1 Large Explosive (M-80 Or Above)
1 Large Cylindrical Cardboard Container
Such As Kool Aid Drink Mix.
4 Cans Comet Cleanser
1 Roll Of Black Electrical Tape
Instructions:
-------------
Fill The Container Half-Way With Comet Cleanser. Then Nestle The Explosive On
The Cleanser. Pour More Cleanser Until Container Is Filled, Leave Explosive'S
Wick Sticking Out Above The Comet. Stick Fuse Through Plastic Top To The
Container, Tape The Plastic Top To The Container Tightly.
To Ignite This Bomb Just Light The Fuse And Move Quickly, The Bomb Will Explode
And Fill The Air With Gasous Poison.
-----------
- Cd Bomb -
-----------
This Is A Nice Impact Bomb, Which Is Fairly Safe To Use If You Are Careful.
Materials:
----------
2 Jars With Metal Lids (Baby Food)
1 Bottle Of Chlorox Bleach
1 Bottle Of Liquid Draino
1 Roll Of Black Electrical Tape
Instructions:
-------------
Fill One Of The Jars With Chlorox And Screw The Lid On. Seal The Lid Tightly
With The Electrical Tape. Then Fill The Other Jar With Liquid Draino And Tape
The Lid Tightly Shut. Next, Tape The Two Jars Tightly Together With The
Electrical Tape.
To Ignite This Just Throw Upon A Hard Surface. The Bottles Will Break And A
Explosion Will Occur. The Larger The Bottles (Jars) The Larger The Effect Of
The Bomb.
-------------
- Soda Bomb -
-------------
This Bomb Gives Both An Explosion And
Poison Gas. Twice As Effective.
Materials:
----------
1 Box Granulated Pool Chlorine
1 Bag Of Sugar
1 Bucket Of Water
1 Two-Liter Soda Bottle Or Other Glass Bottle.
1 Small Glass Jar With Metal Lid
Instructions:
-------------
Make A Mixture Of The Following:
50% Chlorine
50% Sugar
And Put It In The Bottle.Then Fill The Glass Jar With Water And Put It In The
Soda Bottle. Thow This Bomb At A Hard Surface, It'Ll Create A Explosion And
Very Harmful Fumes.
----------------
- Chlorine Gas -
----------------
This Will Produce A Deadly Chlorine
Gas Cloud. Very Deadly.
Materials:
----------
1 Two Liter Bottle
1 Measuring Cup
1 Bottle Of Chlorox Bleach
1 Bottle Of Ammonia
Instructions:
-------------
Pour 1/2 A Cup Of Chlorox Into The Bottle. Pour 1/2 Cup Of Ammonia Into The
Bottle. Quickly Screw On The Cap To The Bottle And Throw The Bottle Far Away.
The Cap Will Blow Off Releasing A Deadly Cloud Of Fumes.
--------------
- Gun Powder -
--------------
Make A Mixture Of The Following:
85% Potassium Nitrate
12% Carbon (Charcoal)
03% Sulfur
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
Another file downloaded from: NIRVANAnet(tm)
& the Temple of the Screaming Electron Jeff Hunter 510-935-5845
The Salted Slug Strange 408-454-9368
Burn This Flag Zardoz 408-363-9766
realitycheck Poindexter Fortran 510-527-1662
Lies Unlimited Mick Freen 415-583-4102
Tomorrow's 0rder of Magnitude Finger_Man 415-961-9315
My Dog Bit Jesus Suzanne D'Fault 510-658-8078
New Dork Sublime Demented Pimiento 415-566-0126
Specializing in conversations, obscure information, high explosives,
arcane knowledge, political extremism, diverse sexuality,
insane speculation, and wild rumours. ALL-TEXT BBS SYSTEMS.
Full access for first-time callers. We don't want to know who you are,
where you live, or what your phone number is. We are not Big Brother.
"Raw Data for Raw Nerves"
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X