26 lines
1.4 KiB
Plaintext
26 lines
1.4 KiB
Plaintext
Nitric Acid / Nitroethane Explosive.
|
|
|
|
It is fairly well known that highly concentrated nitric acid (95+ percent)
|
|
can be used in conjunction with various materials to form a simple but
|
|
powerful 2-component high explosive. Highly concentrated nitric acid, how-
|
|
ever, is not commercially available in many areas and is expensive where it
|
|
is. The following mixture uses 70 percent nitric acid, which is the most
|
|
widely available strength.
|
|
Nitroethane is a common industrial solvent that is quite cheap in bulk. It
|
|
is also safer to use and store than most solvents, including acetone. It can
|
|
be detonated by a #8 blasting cap. Because of the corrosive nature of nitric
|
|
acid, the blasting cap and wires should be coated eith wax or acid-resistant
|
|
epoxy paint. This mixture, although not overly sensitive, should still be
|
|
handled with care. Adding the nitroethane to the nitric acid at the blasting
|
|
area provides maximum safety because nitric acid is not an explosive until
|
|
this is done. When priming de sure the blasting cap is centered in the liq-
|
|
uid. The detonating velocity of this explosive is 6,645 meters per second,
|
|
roughly equivalent in power to TNT. A 1-pound charge is prepared as follows:
|
|
|
|
1) Pour 219 milliliters (310 grams) of 70 percent nitric acid into
|
|
a 1-pint acid-resistant container.
|
|
2) Add 144 grams of nitroethane.
|
|
3) Prime and seal with wax or other acid-resistant material.
|
|
4) Blast.
|
|
|