219 lines
7.8 KiB
Plaintext
219 lines
7.8 KiB
Plaintext
Edited by James Bond written by some morons.
|
|
|
|
|
|
Pyro Files!!!!
|
|
|
|
To all people who don't believe in giving
|
|
the phone company 25 cents for
|
|
a call, or even a dime, this is for you
|
|
|
|
I don't know about the rest of the
|
|
country but here in N.Y.C. they have
|
|
armoured the pay-phones with steel
|
|
plates surrounding the bottom half of
|
|
the phone. This sheild will withstand
|
|
any attack by M-80's, block-busters,
|
|
super-blockbusters, ash-cans,
|
|
pineapples, etc...... (Except Dynamite)
|
|
to destroy this plating and most of the
|
|
bottom half of the phone, use the
|
|
following device.
|
|
|
|
First you must blow out the hing on the
|
|
coin return slot. This can be done with
|
|
most conventional weapons such as a
|
|
block-buster.
|
|
Then, take a 6 inch section of the same
|
|
type of bendable metal tubing that
|
|
surrounds the wire to the reciever,
|
|
but it must be at least 1 inch in dia-
|
|
meter.
|
|
|
|
Then, solder a piece of sheet metal on
|
|
to one side of the tube to seal that
|
|
side. Then fill the tube with the same
|
|
flash-powder used in block-busters and
|
|
fill that end with strong epoxy to seal
|
|
it.
|
|
|
|
One thing I forgot to mention, before
|
|
soldering the round peice of sheet
|
|
metal to the tube, drill a small hole
|
|
in it just big enough to fit a peice of
|
|
demolition fuse through. Then put the
|
|
peice through before filling it.Seal
|
|
the edges of the fuse with the same
|
|
epoxy used to seal the opposite end of
|
|
the tube.
|
|
|
|
Then, when complete, shove the thing
|
|
up into the coin slot with the epoxy
|
|
end going in first.
|
|
|
|
Next thing you know you've got dimes,
|
|
nickels, and quarters falling all around
|
|
you.
|
|
|
|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
|
|
The way to make an extremely explosive
|
|
and unstable contact substance is as
|
|
follows:
|
|
Take any amount of iodine crystals
|
|
and put them in to a generous amount
|
|
of --CONSENTRATED-- ammonia and mix it
|
|
well. Then let it sit for about 1/2
|
|
hour and then mix it again. Then take
|
|
a coffee filter or real chem
|
|
filter and filter the solution through
|
|
it and collect the residue in the filter
|
|
and rinse it with ether or pure
|
|
alcohol.(ether is better) Do this
|
|
4 or 5 times. The Residue left will be
|
|
--HIGHLY-- unstable and explosive when
|
|
it dries so keep it in a paint form
|
|
with the ether and paint it where you
|
|
want. Since ether dries fast, the
|
|
substance is very good for terror. I've
|
|
already had some blow up in my face and
|
|
it wasn't very pleasurable so be careful
|
|
with it.
|
|
|
|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
|
|
Condensation in a car's tank puts a layer of water on its bottom. Gelatin
|
|
capsules filled with one part calcium carbide and one part pure sodium are
|
|
dropped into a car's gas tank. In a few minutes there is an explosion you
|
|
have to see to believe!!!!
|
|
|
|
Gelatin capsules, filled with more gelatin are bought at the supermarket.
|
|
the gelatin is emptied from the capsules and BB's are put into them so they
|
|
sink to the bottom.
|
|
Slivers of metallic sodium and chunks of carbide are then put into the capsules
|
|
...carry the capsules in a plastic bag to keep them dry.
|
|
|
|
Three or four capsules are dropped into a car's gas tank. Several minutes
|
|
- half an hour later....The capsules disentegrate and the moisture turns
|
|
the carbide into explosive gas and also ignites the sodium. The burning sodium
|
|
ignites the carbide gas there is a:
|
|
|
|
B O O M ! ! !
|
|
|
|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
|
|
|
|
>>>If you have M80's or similiar
|
|
take a seltzer CO2 canister and
|
|
let out the CO2.Now cut out top
|
|
almost off just leave a little
|
|
hinge.Now place the M80 inside
|
|
with fuse out the hole in top
|
|
close the top part and either
|
|
very carefully solder the top
|
|
on or use extremely good epoxy
|
|
*********** LIGHT **********
|
|
BOOOM MINY DYNAMITE
|
|
>>>If you don't have M80's poke a
|
|
hole in the top of the canister
|
|
and fill with black powder put
|
|
fuse in and light.
|
|
>>>If you're using a detonator the
|
|
top is sloped so just saw off
|
|
enough for the det. To fit and
|
|
seal with epoxy.
|
|
|
|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
|
|
Go out and buy a "D" or "E" engine
|
|
rocket that is fairly simple.
|
|
Make the rocket like they say and then
|
|
fill the nose cone with some substance
|
|
that has the same weight or close to
|
|
flash-powder.
|
|
Detach the nose cone from the shock
|
|
cord so that only the body will be
|
|
connected to the parachute. Get a good
|
|
stopwatch and a pair of good binoculars
|
|
and launch the rocket straight up.
|
|
Watch the rocket and start timing when
|
|
the ejection charge blows the cone free
|
|
and stop timing right when the cone
|
|
Impacts on the ground.
|
|
Then retrieve the body and get another
|
|
nose cone. Fill the nose cone with
|
|
flash powder and block up the hole with
|
|
model cement. Make sure to have a nice
|
|
little fuse sticking out of the cement.
|
|
That fuse should be a little smaller
|
|
than the amount of time it took for
|
|
impact. (Smaller time-wise)
|
|
Figure that if it took 30 sec. to fall
|
|
then the fuse should be enough for
|
|
about 25 sec.
|
|
Now this is good for a bomb that will
|
|
go straight up and come straight
|
|
down. Now if you want to shoot it on
|
|
an angle, then you must use some
|
|
formula to figure out how high the
|
|
rocket will be when ejection occurs so
|
|
that you can time your fuse right.
|
|
Remember to use a no-time delay engine
|
|
so that the ejection charge will occur
|
|
immediatly.
|
|
|
|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
|
|
If you really wanna blow the shit out of some loser, someone
|
|
(A friend of mine) told me how to do, I think this is what
|
|
Get a bottle (Glass, any size)
|
|
Buy some ammonia (like the stuff used on floors)
|
|
Get the highest concentration of iodine that you can find.
|
|
|
|
Directions:
|
|
Pour a fuckin hell of a lot of ammonia in bottle. Add all of
|
|
iodine (if possible get at least 95% solution of iodine)
|
|
A lot of white shit will seperate at the bottom. Pour out the liquid
|
|
and then take bottle with shit and knife and spread into and of
|
|
your enemy's tire treads. Put the bottle somewhere in the engine.
|
|
(don't keep it or it'll probably blow up and kill you). Now, The
|
|
phunny shit.
|
|
|
|
As soon as that shit is dried, whenever you apply the least
|
|
amount of pressure, the shit will blow up!!! HaHaHaHaHaHaHaHaHa!!!
|
|
there probably won't be much left of the fag you do this to!!!!!
|
|
|
|
Distributed in part by:
|
|
|
|
Skeleton Crue 415-376-8060 located out of Moraga, California.
|
|
!!Get on the band wagon before it RUNS YOU DOWN!!
|
|
Headquarters for Computer Hackers and Anarchists to Overthrow the State
|
|
(CH&AOS)
|
|
|
|
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=/e
|
|
|
|
|
|
|
|
|
|
|
|
|
|
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|
|
|
|
Another file downloaded from: NIRVANAnet(tm)
|
|
|
|
& the Temple of the Screaming Electron Jeff Hunter 510-935-5845
|
|
Rat Head Ratsnatcher 510-524-3649
|
|
Burn This Flag Zardoz 408-363-9766
|
|
realitycheck Poindexter Fortran 415-567-7043
|
|
Lies Unlimited Mick Freen 415-583-4102
|
|
|
|
Specializing in conversations, obscure information, high explosives,
|
|
arcane knowledge, political extremism, diversive sexuality,
|
|
insane speculation, and wild rumours. ALL-TEXT BBS SYSTEMS.
|
|
|
|
Full access for first-time callers. We don't want to know who you are,
|
|
where you live, or what your phone number is. We are not Big Brother.
|
|
|
|
"Raw Data for Raw Nerves"
|
|
|
|
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|