66 lines
2.1 KiB
Plaintext
66 lines
2.1 KiB
Plaintext
How to Make Plastic/Napalm Explosive
|
|
|
|
Written By: ZERO
|
|
|
|
October 15 2001
|
|
|
|
zerotextspy@yahoo.com
|
|
|
|
File #3
|
|
|
|
|
|
|
|
I am going to explain a Plastic Explosive that is not exactly Plastic, but acts as sort of a
|
|
Napalm. You will understand why once you read the file.
|
|
|
|
|
|
Materials/Ingredients:
|
|
|
|
1 Part Gasoline
|
|
1/2 Part Oil
|
|
1 Part Styrofoam
|
|
2 Pots that you may screw up, one must be deep
|
|
1 spoon
|
|
1 Thermometer
|
|
|
|
|
|
How to Make it
|
|
|
|
|
|
First you need to Melt the Styrofoam in one of the pots. Keep a close eye on this, you don't want
|
|
it to get to hot. If it gets to hot, then it will start turning brown or black, and could flame
|
|
up. But if you keep it at low temperature, then you should be fine. After you have somewhat
|
|
liquified the styrofoam, take it off, and let it cool to a thick viscosity. Now you must add
|
|
these three chemicals in order. Pour the styrofoam in the second pot, then the oil, then the
|
|
gasoline. Be sure to stir this mixture with your spoon to make it mix together. When mixing the
|
|
three ingredients together, be sure not to mix them near any flames, or heat. Also be sure that
|
|
you are mixing these ingredients in the deep pot. Now,stick your thermometer in the mixture, and
|
|
let the mixture cool to about 88 degrees farenheit. Now you may mold the mixture however you
|
|
want. I wouldn't do it with your bare hands. So you should have a mold near by. Or you could just
|
|
leave it in the pot, and scrape it out whenever it is hard.
|
|
|
|
|
|
|
|
How to Use It
|
|
|
|
|
|
You Can throw it against something hard. This does not work that much, but sometimes it does. And
|
|
if it does, I wouldn't want to be the one throwing it.
|
|
|
|
|
|
It can be Wired for an Electrical Charge (recomended). Just Take two copper wires about 50 feet
|
|
long (each), and stick one end of each of them into the explosive. Now stretch the wires out as
|
|
far as they can go, and connect them to a car battery. This will blow it up every time.
|
|
|
|
|
|
also, you could use a fuse to set it off. Just stick your Fuse in the explosive, and light it.
|
|
Personally, I do not trust fuses at all. They can be tricky sometimes.
|
|
|
|
|
|
You can add an electic time detonater. This gives an advantage. You may set it for however many
|
|
hours, or minutes to go off.
|
|
|
|
|
|
|
|
|