84 lines
4.8 KiB
Plaintext
84 lines
4.8 KiB
Plaintext
Self igniting firebomb
|
|
|
|
<<<<<<<<Disclaimer>>>>>>>>
|
|
If you are searching Internet text file dumps for this sort of information you are very probably an idiot & shouldn't be messing with
|
|
dangerous things like this, I'll tell you now that you will fuck up & maime yourself & it won't be my fault because I told you so.
|
|
<<<<<<<<Disclaimer>>>>>>>>
|
|
|
|
Okay now, this is somewhat similar in concept to the internal firebomb discribed by lonewolf but it uses chemical that are easier to obtain
|
|
in a pure or atleast usable form.
|
|
|
|
There are a few ways of doing it.
|
|
|
|
Here are some things common to all the variants I'll be outlining:>
|
|
#2 sealable glass vessels(one must be able to fit inside the other with plenty of space left for liquid, preferably this internal glass
|
|
vessel should be of thinner glass that the larger one)
|
|
|
|
#Some petrol(gasoline to you yanks) or diesel or oil or brake fluid(anything petroleum based)
|
|
|
|
#1 or 2 marble sized steel ball bearings or some stones are optional.
|
|
|
|
For variant 1 you need your glass vessels, your prefered petroleum based liquid(petrol will ignite instantly & probably do the most damage
|
|
although it doesn't stick to things so well without additives, wereas brake fluid for example sticks quite well & spews alot of toxic smoke
|
|
too but it will be slow to ignite), some granulated pool chlorine which you can find at any supermarket(unfortunately in Australia atleast
|
|
5kg is the smallest size), you may also wish to try experimenting with various liquid chlorine products but I can't vouch for the results.
|
|
|
|
Step 1:> Take your smaller vessel(for example a Masterfoods, McCormick or similar spice/herb jar does quite nicely, so does the 50ml Tobasco
|
|
sauce bottle) & fill it up with your pool chlorine & then screw the lid on nice & tight(you might even want to seal up with selastic or the
|
|
like to be sure no liquid can get in there until it's broken).
|
|
|
|
Step 2:> Put a good amount of fuelproof adhesive(one that sticks to glass) on the bottom of your small vessel & insert it into you larger
|
|
vessel(a coffee jar, peanut butter jar, honey jar or the like is a good option) & press it down so that it becomes glued to the bottom of
|
|
your larger vessel.
|
|
|
|
Step 3:> Fill the remaining space in the larger vessel with your chosen petroleum based liquid, at this point you may if you wish also add
|
|
stones or steel balls, seal the lid.
|
|
|
|
You should now have yourself a molitov cocktail that will automatically ignite if the internal jar or both jars are broken.
|
|
|
|
|
|
|
|
|
|
The second variant is pretty much the same as the first one except that the chlorine is substituted for 50%hydrogen peroxide(in Australia
|
|
you can get this at any chemist or as you call it in America drug store you don't have to ask at the counter, head straight for the shelves
|
|
marked "Wound Care"), I'd also suggest that only Petrol or Diesel would be suitable.
|
|
|
|
|
|
|
|
|
|
Finally I have for you a self igniting projectile, it can work in either of the ways above & be fired from an orange gun(the compressed air
|
|
kind, not the ignited aerosole kind for obvious reasons), it takes more work than kinds above.
|
|
|
|
You need:>
|
|
#A light bulb(chosen for its relatively aerodynamic shape & close size relation to an orange or potato)
|
|
|
|
#A test tube of about 20mm outside diametre & the rubber plug that goes with it, or you can find some iodine, eyedrop, food colouring, Cooking
|
|
glycerine bottles etc that are about the right size & probably easier to get than a test tube.
|
|
|
|
#A dremel or similar rotary tool with some slitting/cutting disks
|
|
|
|
Optional:> some cardboard or balsa fins.
|
|
|
|
Step 1:> Take your dremel & your light bulb & carefully cut around the stem where the metal joins the glass, once this is done you should
|
|
be able to pull the whole core of the bulb out & be left with the now completely hollow body of the bulb with a 20mm openening in the stem.
|
|
|
|
Step 2:> take your dremel & your test tube & carefull cut your test tube down so that when inserted into the light bulb it only just pokes
|
|
out of the stem of the light bulb, after this remove the test tube from the light bulb until later.
|
|
(Ignore step 2 if you obtained a suitable sized bottle instead)
|
|
|
|
Step 3:> fill(taking care to leave room for the rubber plug) your test tube up with chlorine or 50% hydrogen peroxide & now plug it up &
|
|
selastic it.
|
|
|
|
Step4:> Fill your light bulb with petrol or diesel & then insert your test tube(there will be overflow as you insert the tube but if you
|
|
had put the tube in first you wouldn't get the liquid in) into the light bulb so that it pretty much plugs the hole in the bulb, you will
|
|
need to seal it with selastic or similar silicon adhesive, at this point you may wish to attach fins to the stem of the bulb.
|
|
|
|
You should now have a spiffy little fire bomb that can be launched from a compressed air cannon(eg: orange gun).
|
|
|
|
Strych9 Milksheikh
|
|
|
|
strych9milksheikh@ausi.com
|
|
|
|
|
|
|
|
|