textfiles/survival/magndet.txt

181 lines
9.2 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

(SENSOR HEAD)
Soft Iron Core (rod, must fit tightly)
ロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロロ
レトト<EFBE84><EFBE84><EFBFBD><EFBFBD>トトソ
ウ L1 ウ
R1 ウ D1 ウ O +1.5Vdc
レト/\/\/\/\トトトトトトトトトナトトトトトトッナトトトトエ R2 ウ
ウ テトトトトトトトトトトトト)トト/\/\/\/\トナトトトトトエテトトソ
テトトトトトトトトトエテトトトトトトトナトトトトトナョトトトトトナトト/\/\/\/\ト(トソ C6ヘヘマヘヘ
ヘヘマヘヘ C8 ウ D2 ウ R3 ウ ウ ヘヘヘ
ヘヘヘ レトトトチトトトトトトトトトトトトチトトトソ ウ ウ ヘ
ヘ \ 3 2 / ウ ウ
\ / ウ ウ
レトトトトトトトトトトトト\1 (LM4250) / ウ ウ
ウ \ A1 / ウ ウ
タ/\/\/\/\トトトトトト\5 / ウ ウ
-1.5Vdc R11 トトトトトトトトトトト\4 / ウ ウ
Oトトトトトツトトトトル \ 7 /トトトトトトトトトトトトトトル ウ
タトエテトツト/\/\/\/\トトトト\8 / ウ
C7 ヘヘマヘヘ R4 \ / ウ
ヘヘヘ \/ ウ
ヘ ウ6 ウ
テトトトトトトトトトトトトトトトトトトトル
レトトナソ
Shieldedウ ウテトトトソ
タツトトエ ヘヘマヘヘ
Cable ウ ウ ヘヘヘ
ウ ウ ヘ
レチトトエ
ウ ウウ
タトトナル
V Plug
O
ウ Jack
V to amp box
(AMP BOX)
ウ ウ From sensor head
Shielded cable ト> レトチトトトチトソ
レトトトトトトツエ ウ
ヘヘマヘヘ ウタトトトナトトトル R6 R5
ヘヘヘ テトトトト(トト/\/\/\/\トツト/\/\/\/\トソ
ヘ ウレトトトチトトトトトトトトトトトチトトトトソ ウ
ウ \ 3 2 / ウ
ウ \ / ウ
-6 Oツトトトト(トトト\4 (UA741) / ウ
Vdc タトエテトエC4 \ A2 / ウ
ウ \ / ウ
+6 Oツトトトト(トトトトトト\ 7 / ウ
Vdc タトエテトエC5 \ / ウ *
ウ \ / ウ ロ means 'Yes Virginia
ウ \6 / ウ there _IS_ a
ウ \/ ウ connection".
ウ ウ * R13/S1 ウ
タト/\/\/\/\トトロトトトトトトトトトトトトトトトル
R12ウ タト/\/\/\/\トトトトツトトトトトソ
ウ ウ ヘヘマヘヘ ウ
Shielded >>トトトトトエ D4 ウ ヘヘヘ C1 ウ レトトトソ
Jack テトトトソ タトッナソ ウ ヘ レエテトル R10 ウル Q3ウ
ヘヘマヘヘ タトツエテトエ タトトトトトッナトトチトト/\/\/\/\トツウソNPNウ
ヘヘヘ ウ C2ウ D3 レトトトエテトル タ>トソウ
ヘ レトトチトトソウ テトトトトトトトトトトトルウ
Micro Ampere meterウ uA Mテル ヘヘマヘヘ C1 ウ
(circuit optional) タトトトトトル ヘヘヘ ウ
ヘ ウ
レトトトトトソ レトトトトトトトトトトトトトトトトトトトトトトトトトトトトトトトトル
ウ ウ ウ レトトトトトトトトトトトトトトソ
R7 V R14 ウ ウ ウレトトトトUUUUUUUUトル T1
レト/\/\/\/\トト/\/\/\/\トナトO +6Vdc ウ ウウ ==========
ウ レト/\/\トトソ レ<トトトトル ウ ウウ レト<EFBE9A><EFBE84><EFBFBD><EFBFBD>トトトトトトトトトソ
ウ ウル Q2 R8ウウル Q1 ウ ウウ ウ レチソ/ウ
タトトツウソNPN タエソPNP ウ ウウ ウ タツル\ウSPK1
レトエテル タ>トソ タトトトトトトトトトトトトトトツトト(トルウ タトトトトトトトトトトトトトトトトトトル
タトトトトトトトト(トトトトトトトトトトトト/\/\/\/\トル テトトル
C3 タトトトトトトトトトトトトトトトトトトトトトトトトル
R9 ウ ウ
レトトトトトエウウテトトO - 6Vdc
R13/S1 ウ ウ ウ
レトトトトソ (spst) ウ
ヘヘマヘヘ ウ / ウ ウ ウ
ヘヘヘ タトトトO/ OトトトトトトトチトトトトトエウウテトトトO + 6Vdc
ヘ (on pot) ウ ウ
Component Quantity Description
R1, 3 2 1.5 Meg ohm 1/4 Watt
R2 1 5.6 Meg ohm 1/4 Watt
R4 1 10 Meg ohm 1/4 W
R5 1 1 Meg ohm 1/4 W
R6, 10 2 4.7 K ohm 1/4 W
R7 1 1 K ohm 1/4 W
R8 1 10 K ohm 1/4 W
R9 1 100 ohm 1/4 W
R11, 14 2 100 K ohm potentiometer (trimpot)
R12, 13 2 5 K ohm potentiometer with switch
C1 1 4.7 uf 25V electrolytic (E) capacitor
C2 1 1 uf 50V E cap
C3, 4, 5, 6,
7, 8 6 .1 uf 25V (ceramic disk type good)
A1 1 LM4250 nano-amp amplifier
A2 1 UA741 op-amp
Q1 1 PN2907 PNP
Q2, 3 2 PN2222 NPN
D1, 2, 3, 4 4 1N914 signal diodes
T1 1 Matching transformer/ 1K/8 ohm (audio)
2 Phono plugs
2 Phono jacks
2 Battery holders (4 "AA")
1 Battery holder (2 "AA")
M1 1 100 uA (microampre) Panel meter
SPK1 1 8 ohm speaker (small)
CORE 1 Soft iron (ferrite) core. LONG (2 - 3 ft)
Batteries
Project boxes to suit your needs
* L1 is the high voltage secondary of a transformer. Find an oil burner,
an old flyback from a TV, any coil with as many windings as you can find.
The more windings the better. (Thousands are in flyback secondaries).
The CORE fits snugly into the center of L1 (or must be secured with
glue).
Adjust R11 for ZERO volts on pin 6 of "A2" (referenced to ground).
Adjust R12 to control meter deflection (may also hook jack to voltage sensor
type trigger circuit).
Adjust R13 for desired sensitivity of audio alarm (if used).
Adjust R14 for clean tone (if audio section used).
This circuit, although I have used portions of it many times, is
considered (by me anyway) untested. The principles are sound and I
have found the sections I have used quite effective when modified
for my own purposes.
This circuit will, when properly constructed (shielding VERY
important) will detect any nearby disturbance of the earths
magnetic field. A vehicle passing by, for example, will cause an
audible tone and send the meter to max deflection. I suppose
it would also have no problem, if placed on a path in the bush,
detecting persons walking nearby, if, of course, they carried
any fair amount of metallic objects. (HINT HINT!)
I recommend that you orient this device (the CORE) in an EAST to
WEST direction. That will pick up the best disturbance of the field.
Also, use the shielded cable idea to separate the head as far away
from the amplifier box as possible/practical, and find as LARGE a
piece of ferrite rod (or soft iron) as you can (3 feet good).
This unit is very sensitive when assembled/installed/adjusted
properly. Do not attempt to use this circuit near airports, as
the device, under the proper conditions, may constantly trigger
because of the low flying aircraft (ANOTHER HINT!).
******************* DISCLAIMER DISCLAIMER DISCLAIMER *******************
BUILDERS- If you have any comments (constructive please, life's
enough of a pain in my ass already) please foreword them to the
system operator or individual you obtained these schematics from.
"COMMANDERS" this circuit contains what could be considered
'proprietary' designs. It is submitted as anonymous (sp?!) I
would, however, be interested in any constructive feedback.
Have fun. Stay safe. Survive.
"ALL" I have tried to be as faithful as I could transposing
these plans to a plain ascii form. There are NO guarantees however.
Use this AT YOUR OWN RISK. If you build this and it turns out
to be a subspace phase shifter and your entire world goes
PFZZZT when you turn it on...... Oh WELL !
ah