textfiles/phreak/static.box
2021-04-15 13:31:59 -05:00

98 lines
3.3 KiB
Plaintext

+---------------------------------------------------------------+
| You have received this information courtesy of .neXus. We do |
| not claim to be hackers, phreaks, pirates, traitors, etc. We |
| only believe that an alternative to making certain info/ideas |
| illegal as a means to keep people from doing bad things - is |
| make information free, and educate people how to handle free |
| information responsibly. Please think and act responsibly. |
| Don't get cockey, don't get pushy. There is always gonna be |
| someone out there that can kick your ass. Remember that. |
| |
| Keep the net connected......... - .gKo. |
+---------------------------------------------------------------+
----------
STATIC BOX
----------
By: The Usurper and The Raver
------------
Introduction
------------
We were looming at the Aqua Box plans and we saw something about
static on long-distance calls in the file. It said that you get
static because the voltage is not getting regulated very well.
So why not have a box that keeps the voltage regulated so that
you can avoid static? This would be very useful when calling a
BBS with an extender that flakes-out and gives you garbage on the
screen. So here it is...
---------
Materials
---------
1. (2) Size 'AA' Batteries, and holder (You could use a
adapter, so you won't have to buy batteries...ex. A 3,6,9,12
volt adapter in one!)
2. (1) Two fone line connector (Has two plugs from one)
3. (1) Modular plug w/6 inches of colored wire connected.
4. 2 feet of telephone wire
5. (1) 100k Resistor
6. Soldering Iron
7. Solder.....get all of this at Radio Shack of course!
----------
Schemantic
----------
__________ Two-way
Static box -> | Plug 1 \ plug
|___________\
Telephone -> | Plug 2 |__\__
|_________|_____|
+-------------Green-wire F/plug----+__\__
| _____|
+-----|-----\/\/\----Red-wire F/plug-----+
| | 100k Modular plug
- + resistor
+-| |---| |-+
| +---+---+ |
| | - | + | |
| | t |1.5| |
| | l | V | |
| | o | o | | <- I reccomend 3 volts for most connections.
| | V | l | |
| |1.5| t | |
| +---+---| |
+-----------+
Have your phone connected to one of the plugs, then if you want
to use the Static box plug it into the other one and put the bat-
teries in the case. That will remove static. This will be use-
ful in using 2400 baud on an extender (because of shitty lines).
You may want to make the voltage 9 volts, with a 9 volt battery
holder. What the hell, make two, one for 3 volts (Normal stuff),
and one for 9 volts (Special connections like 2400 baud on a ex-
tender). Be sure not to leave it hooked up, because it may make
your phone act funny, and people may not get calls through! You
could use even a bigger voltage, an use it as "Lock 'n Trace",
and make some asshole squirm!
+++EOF