118 lines
5.1 KiB
Plaintext
118 lines
5.1 KiB
Plaintext
][==================================][
|
||
|| ||
|
||
|| Circuit Switched Digital ||
|
||
|| Capability ||
|
||
|| ------------------------- ||
|
||
|| Written by ||
|
||
|| ||
|
||
|| The Executioner ||
|
||
|| ||
|
||
|| and the ||
|
||
|| ||
|
||
|| [+] PhoneLine Phantoms [+] ||
|
||
|| - - - ||
|
||
][==================================][
|
||
|
||
The Circuit Switched Digital Capability feature provides for the end-to-end
|
||
digital transmission of 56 kilobits per second (kb/s) data and, alternately,
|
||
the transmission of analog voice signals on a circuit switched basis. The CSDC
|
||
feature was formerly known as PSDC (Public Switched Digital Capability). Both
|
||
terms are used in practice because of translations, set cards and etc.
|
||
requiring the PSDC term. The CSDC term is used for customer identification and
|
||
explanation. The CSDC feature provides an alternate voice/data capability. If
|
||
the loop is a wire loop, CSDC utilizes time compression multiplexing (TCM)
|
||
which allows for the transmission of digital signals over a common path using a
|
||
separate time interval for each direction. During a CSDC call the caller may
|
||
alternate between voice and data as many times as desired. CSDC can support
|
||
subvariable data rates but a 56 kb/s is used in the network.
|
||
|
||
Some applications for CSDC:
|
||
|
||
1. Audiographic teleconferencing
|
||
2. Secure voice
|
||
3. Facsimile
|
||
4. Bulk data
|
||
5. Slow scan television
|
||
|
||
A typical CSDC call is originated over a 2-wire loops which can be used for
|
||
message telecommunications service (MTS) and touch tone is required. Calling
|
||
can be done by automatic calling equipment (ACE) or manually. Digit reception,
|
||
transmission, and signalling follow the same procedures used for MTS outgoing
|
||
calls on CCIS or non-CCIS trunks. However, CSDC calls are always routed over
|
||
digital transmission facilities.
|
||
|
||
=================
|
||
=Long term plans=
|
||
=================
|
||
|
||
The long term plan allows for Equal Access Multi-frequency (EA-MF) signalling
|
||
and improved AMA. A CSDC call attempt is screened to ensure that the calling
|
||
party has CSDC and the carrier used provides 56 kb/s alternate voice/data at
|
||
the office. A blocked call is routed to a special error message. A CSDC call is
|
||
routed directly to the carrier or indirectly via the access tandem (AT) or
|
||
signal conversion point (SCP). The call is terminated directly from the carrier
|
||
to the end office or indirectly via the AT or SCP. Signalling for direct
|
||
routing is either CCIS or EA-MF and is assigned on a trunk group basis.
|
||
|
||
The AT is a 1A ESS switch which allows access to carriers form and end office
|
||
without requiring direct trunks. Signalling between the end office and the AT
|
||
is either EA-MF or CCIS, Trunk groups using EA-MF signalling can have combined
|
||
carrier traffic. Separate trunk groups for each carrier are required for CCIS
|
||
signalling.
|
||
|
||
The SCP is a 1A ESS switch which allows access to carriers using only CCIS
|
||
signalling from offices without the CCIS capability. Separate trunk groups for
|
||
each are used between the originating end office and the SCP. Separate trunk
|
||
groups are optional between the SCP and the terminal end office. Signaling
|
||
between the end office and the SCP is MF. The SCP must have direct connection
|
||
to the carrier using CCIS.
|
||
|
||
CSDC is also available for Centrex/ESS X-1customers. Most of the capabilities
|
||
of centrex service can be applied to the CSDC feature. CSDC provides the
|
||
following for the centrex group:
|
||
|
||
1. Message Network Basis
|
||
2. Intracentrex group basis
|
||
3. Intercentrex group basis
|
||
4. Any combo of above
|
||
|
||
|
||
=========
|
||
=Dialing=
|
||
=========
|
||
|
||
To establish a CSDC call, a user dials the following:
|
||
|
||
#99 AB (1+) 7 or 10 digits (#)
|
||
|
||
The user dials '#99' to access CSDC and AB is the carrier being used. The '#'
|
||
is used optional for end of dialing indicator. The long-term dialing plan is as
|
||
follows:
|
||
|
||
#56 (10XXX) (1+) 7 or 10 (#)
|
||
|
||
Dialing 56 means 56 kb/s. The 10XXX identifies the carrier. If 10XXX is not
|
||
dialed on an Inter-LATA call, the primary subscriber is used. If 10XXX is not
|
||
dialed on an Intra-LATA call then the local Telco handles it.
|
||
|
||
=================
|
||
=Switching Modes=
|
||
=================
|
||
|
||
Suppose Party A wants to switch from voice to data. Party A issues a mode
|
||
switch command and then receives a signal called a far end voice (FEV) bipolar
|
||
sequence (2031 hz at 60 ipm). Party A can now hang up any time. Party B
|
||
receives a far end data tone at 2031 hz at 39 ipm indicating that Party A wants
|
||
to do some data transfer. Then Party B must initiate a mode switch command.
|
||
Party B then hangs and transmission is possible.
|
||
|
||
TO switch back to voice, Party A initiates a mode switch command and this
|
||
time receives an FED tone, and B gets an FEV tone. Party B then picks up and
|
||
does a switch then the voice is established.
|
||
|
||
=====================================
|
||
= (C) 1985 Sexy-Exy & The PLP =
|
||
=====================================
|
||
|
||
Dedicated to The Guardian Demon.
|