95 lines
3.5 KiB
Plaintext
95 lines
3.5 KiB
Plaintext
ALPINE 9511, 9525 and 9530.
|
||
|
||
NOTE: These units are manufactured by Fujitsu and have four NAMS.
|
||
The ESN prefix is 150 decimal, 96 hex.
|
||
New units will remain locked until programed.
|
||
Alpine: 310-326-8000, Outside CA 1-800-421-2284
|
||
|
||
NAM 1 programing:
|
||
|
||
1: Turn on power.
|
||
|
||
2. Confirm unit is locked, if not press F + * (LOCK).
|
||
|
||
3. Turn power off and on again. Press #626#7764726, this spells
|
||
#NAM#PROGRAM on the keypad. This code must be entered within
|
||
ten seconds of power up.
|
||
|
||
4. You will hear a continuous tone once the above step has been
|
||
completed. Hold down the * key during this tone. The tone
|
||
becomes intermittent. Continue to hold * until the tone
|
||
stops. Release *.
|
||
|
||
5. You are now in program mode, the phone will display the NAM
|
||
program step number and the data for that step.
|
||
|
||
6. The STOR key enters data and increments the step number.
|
||
|
||
7. The SEND key completes and exits programing mode.
|
||
|
||
8. If all data has been entered correctly the phone will wake
|
||
up in the locked mode. Enter the 3 or 4 digit lock code.
|
||
|
||
9. If any data was entered incorrectly the phone will emit a
|
||
short high tone. Scroll thru ALL entries to confirm, then
|
||
press SEND again. NOTE: Even if only one step is incorrect
|
||
you must step thru all entries for the phone to recycle when
|
||
you press SEND.
|
||
|
||
TO PROGRAM NAMS 2 THRU 4:
|
||
|
||
1. With phone powered up and unlocked press F+7+N where N = the
|
||
NAM number 2, 3 or 4.
|
||
|
||
2. Lock the phone. (F+*)
|
||
|
||
3. Program the additional NAM(S) by following the above
|
||
procedures from step 3.
|
||
|
||
|
||
|
||
PROGRAMING DATA:
|
||
|
||
STEP# #OF DIGITS/RANGE DESCRIPTION
|
||
|
||
01 00001-32767 SIDH
|
||
02 0 OR 1 LOCAL USE
|
||
03 0 OR 1 MIN MARK
|
||
04 10 DIGITS MIN (PHONE #)
|
||
05 00-15 STATION CLASS
|
||
06 0333 OR 0334 INITIAL PAGING CHANNEL
|
||
07 2 DIGITS ACCESS OVERLOAD
|
||
08 0 OR 1 PREFERRED SYSTEM
|
||
09 2 DIGITS GROUP ID (10 FOR USA)
|
||
10 3 OR 4 LOCK CODE
|
||
11 1 - 4 CALL TIMER
|
||
1 = user changeable, timer off.
|
||
2 = 6 second increments.
|
||
3 = 30 second increments.
|
||
4 = 60 second increments.
|
||
12 1 - 4 LOCK MODE
|
||
1 = user changeable, manual lock, no
|
||
outgoing calls.
|
||
2 = manual lock, no incoming or
|
||
outgoing calls.
|
||
3 = Auto lock, no outgoing calls.
|
||
4 = Auto lock, no incoming or
|
||
outgoing calls.
|
||
13 1 - 5 CALL RESTRICTION MODE
|
||
1 = No restriction.
|
||
2 = No memory access.
|
||
3 = No long distance.
|
||
4 = 2 & 3 combined
|
||
5 = Memory dialling only.
|
||
14 0 - 32767 SIDH INHIBIT
|
||
15 0 - 32767 SIDH INHIBIT
|
||
16 0 - 32767 SIDH INHIBIT
|
||
|
||
NOTE: Alpine 9511 does not have SIDH inhibit and will return to step
|
||
one having completed step 13.
|
||
|
||
|
||
LOCK: F LOCK. UNLOCK: Three or Four digit code.
|
||
|
||
SYSTEM SELECT: F11 = A/B, F12 = B/A, F13 = A ONLY, F14 = B ONLY,
|
||
F15 = HOME ONLY |