248 lines
12 KiB
Plaintext
248 lines
12 KiB
Plaintext
*******************************************************************************
|
||
Bridging Heads, Residential and Business Multiline Distribution boxes, Line and
|
||
Trunk Splitters, and Other Bell System Wire Terminations.
|
||
|
||
- How to Use, And/Or Abuse Them -
|
||
|
||
(Including a tutorial on basic telephone eavesdropping techniques.)
|
||
***************************************
|
||
Written by : Agent 07/29/84
|
||
04
|
||
***************************************
|
||
|
||
In this article, I will first describe the termination, wiring, and terminal
|
||
hardware most commonly used in the bell system, and I will include a section on
|
||
methods of using them.
|
||
***************************************
|
||
|
||
-------------
|
||
Local Network
|
||
-------------
|
||
|
||
the local telephone network between the central office/exchange and the
|
||
telephone subscribers can be breifly described as follows:
|
||
|
||
from the central office (or local exchange) of a certain prefix (es),
|
||
underground area trunks go to each area that has that prefix. (Usu- ally more
|
||
than one prefix per area) at every few streets or tract areas, the underground
|
||
cables surface. They then go to the telephone pole (or back underground,
|
||
depending on the area) and then to the subsribers house (or in the case of an
|
||
apartment building or mutliline business, to a splitter or distribution
|
||
box/panel).
|
||
|
||
***************************************
|
||
|
||
Now that we have the basics, I'll try and go in-depth on the subject.
|
||
|
||
------------------
|
||
Underground Cables
|
||
------------------
|
||
|
||
these are sometimes interoffice trunks, but usually in a residential area
|
||
they are trunk lines that go oto bridging heads or distribution cases. the
|
||
cables are about 2-3 inches thick (varies), and are either in a metal or
|
||
pvc-type pipe (or similar). Rarely (maybe not in some remote rural areas) are
|
||
the cables just 'alone' in the ground. Instead, they are usually in an
|
||
underground cement tunnel (resembles a small sewer or stormdrain) . The
|
||
manholes are >heavy< and will say 'bell system' on them. They can be opened
|
||
with a 1/2 inch wide crowbar (hook side) inserted in the top rectangular hole.
|
||
if you get it open, go inside!! There are ladder rungs to help you climb down.
|
||
you will see the cable pipes on the wall, with the blue and white striped one
|
||
being the interoffice trunk (at least in my area). The others are local lines,
|
||
and are usually marked or color coded. there is almost always a posted color
|
||
code chart on the wall, not to mention telco manuals describing the cables and
|
||
terminals, so I need not get into detail. Again: >if you can get into a bell
|
||
manhole, do it!, it will pay off <. Also, there is usually some kind of test
|
||
equipment, and often bell test sets are left in there. so get your crowbars!
|
||
|
||
***************************************
|
||
|
||
--------------
|
||
bridging heads
|
||
--------------
|
||
|
||
the innocent-looking grayish-green boxes. These can be either trunk bridges
|
||
or bridging for residen ces. The major trunk bridging heads are usually
|
||
larger, and they have the 'western electric' logo at the bottom, whereas the
|
||
normal bridging heads (which may be different in some areas depending on the
|
||
company you are served by. GTE b.h.'s look slightly different. Also, do not
|
||
be fooled by sprinkler boxes!) can be found in just about every city.
|
||
|
||
to open a bridging head: if it is locked (and you're feeling destructive),
|
||
put a hammer or crowbar (the same one you used on the manhole ) in the slot
|
||
above the top hinge of the right door. pull hard, and the dorr will rip off.
|
||
very effective!
|
||
|
||
if it isn't locked (as usual), take a 7/16 inch hex socket and with it, turn
|
||
the bolt about 1/8 of a turn to the right (you should hear a spring release
|
||
inside). Holding the bolt, turn the handle all the way to the left and pull
|
||
out.
|
||
|
||
now inside, first check for a test-set (which are often left by bell
|
||
employees). There should be a panel of terminals and wires. Push the panel
|
||
back about an inch or so, and rotate the top latch (round with a flat section)
|
||
downward. Release the panel and it will fall all the way forward. There is
|
||
usually a large amount of wire and extra terminals. The test-sets are often
|
||
hidden here, so dont overlook it (manuals, as well, are sometimes placed in the
|
||
head) . On the right door is a metal box of alligator clips. Take a few
|
||
(complimen- ts of bell...). On each door is a useful little round metal
|
||
device. (Says 'insert gently' or 'clamp gently-do not overtighten' etc..) on
|
||
the front of the disc, you should find two terminals. These are for your test
|
||
set. (If you dont have one, dont depair-I'll show you ways to make basic
|
||
test sets later in this article). Hooking the ring (-) wire to the 'r'
|
||
terminal; and the tip (+) wire to the other. (By the way, an easy way to
|
||
determine the correct polarity is with a 1.5v led. Tap it to the term. Pair,
|
||
if I doesnt light, switch the poles until it does. When it lights, find the
|
||
longer of the two led poles. This one will be on the tip wire (+)) behind the
|
||
disc is a coiled up cord. This should have two alligator clips on it..its very
|
||
useful, because you dont have to keep connecting and disconnecting the fone
|
||
(test set) itself, and the clips work nicely.
|
||
|
||
on the terminal board, there should be about 10 screw terminals per side.
|
||
follow the wires, and you can see which cable pairs are active. Hook the clips
|
||
to the terminal pair , and you're set! Dial out if you want, or just listen
|
||
(if someone's on the line). Later, I'll show you a way to set up a true 'tap'
|
||
that you can set up, and will let the person dial out on his line and receive
|
||
calls as normal, and you can listen in the whole time. more about this
|
||
later...
|
||
|
||
on major prefix-area bridging heads, you can see 'local loops', which are two
|
||
cable pairs (cable pair = ring+tip, a fone line) that are directly connected to
|
||
each other on the terminal board. These 'cheap loops' as they are called, do
|
||
not work nearly as well as the existing ones set up in the switching hardware
|
||
at the exchange office. (Try scanning your prefixes' 00xx or 99xx #'s. The
|
||
tone sides will announce themselves with the 1000 hz loop tone, and the hang
|
||
side will give no response. The first person should dial the 'hang' side, and
|
||
the other person dial the tone side, and the tone should stop if you have got
|
||
the right loop)
|
||
|
||
if you want to find the number of the line that you're on, you can either try
|
||
to decipher the 'bridging log' (or whatever), which is on the left door. If
|
||
that doesnt work, you can use the follwing:
|
||
|
||
---
|
||
ANI # (automatic number indentication)
|
||
---
|
||
this is a telco test number that reports to you the number that youre calling
|
||
from (it's the same, choppy 'bell bitch' voice that you get when you reach a
|
||
disconnected #)
|
||
|
||
for the 213 NPA - dial 1223
|
||
408 NPA - dial 760
|
||
914 NPA - dial 990
|
||
|
||
these are extremely useful when messing with any kind of line terminals,
|
||
house boxes, etc.
|
||
|
||
now that we have bridging heads wired, we can go on... (Dont forget to close
|
||
and latch the box after..wouldnt want to get and telco people mad, now, would
|
||
we?)
|
||
***************************************
|
||
------
|
||
"cans" - telephone pole distribution
|
||
------ boxes
|
||
|
||
basically, two types:
|
||
|
||
|
||
basically, two types:
|
||
|
||
1> large, rectangular silver box at the end of each street.
|
||
2> black, round or rectangular thing at every telephone pole.
|
||
|
||
type 1 - this is the case that takes the underground cable from the bridger
|
||
and runs it to the telephone pole cable (the lowest, largest wire on the
|
||
telephone pole). The box is always on the pole nearest the briging head, where
|
||
the line comes up. Look for the 'call before you dig-underground cable'
|
||
stickers..
|
||
|
||
the case box is hinged, so if you want to climb the pole, you can open it
|
||
with no problems. These usually have 2 rows of terminal sets. these are all
|
||
the cable pairs for your street . (Its similar to a miniature bridging head).
|
||
use/abuse it in the same manner as we did before. (Note: all the active lines
|
||
carry from 15 to 48 vdc, and even 90vac (when ringing), so be careful - it's
|
||
not very wise to touch an open wire with one hand on a conducting thing and a
|
||
hand from a tel. Pole, it >can< be harmful!)) oh, by the way, if you use ANI
|
||
on every pair and you find one that isnt in use on your street, you can hook it
|
||
up for yourself (almost). Also, you have to be able to imper- sonate a telco
|
||
technician and report the number as 'new active' (giving a fake name and fake
|
||
report, etc) I dont recommend this and it probably wont (almost positively
|
||
wont) work, but this is basically what telco linemen do).
|
||
|
||
type 2 - this is the splitter box for the group of houses around the pole.
|
||
(usually 4 or 5 houses). Use it like I mentioned before. The terminals (8 or
|
||
so) will be in 2 horizontal rows of sets. The extra wires that are just
|
||
'hanging there' are provisions for extra lines to residences (1 extra line per
|
||
house, thats why the insane charge for line #3!) if its the box for your house
|
||
also, have fun and swap lines with your neighbor! 'Piggyback' them and wreak
|
||
havoc on the neighborh ood (it's eavesdropping time...) again, I dont recommend
|
||
this, and its difficult to do it correctly. Moving right along..
|
||
***************************************
|
||
------------------------------
|
||
apartment / business multiline
|
||
distribution boxes
|
||
------------------------------
|
||
|
||
found outside the buliding (most often on the right side, but not
|
||
always..just follow the wire from the telephone pole) or in the basement. It
|
||
has the terminals for all the lines in the building. Use it just like any
|
||
other termination box as before. Usually says 'bell system' or similar. Has
|
||
up to 20 terminals on it (usually) the middle ones are grounds (forget these).
|
||
the wires come from the cable to one row (usually the left one) , with the
|
||
other row of terminals for the building fone wire pairs. The ring (-) wire is
|
||
usually the top term inal if the set in the row (1 of 10 or more), and the tip
|
||
is in the clamp/ screw below it. This can be reversed, but the cable pair is
|
||
always terminated one-on-top-of-each-other, not on the one next to it. (im not
|
||
sure why the other one is there, probably as a provision for extra lines) dont
|
||
use it though, it is usually to close to the other terminals, and in my
|
||
experiences you get a noisy connection.
|
||
|
||
final note: almost every apartment, business, hotel, or anywhere there is
|
||
more than 2 lines this termination method is used. If you can master this
|
||
type, you can be in control of many things... Look around in your area for a
|
||
building that uses this type, and practice hooking up to the line, etc.
|
||
|
||
as an added help, here is the basic 'standard' color-code for multiline
|
||
terminals/wiring/etc...
|
||
|
||
single line: red = ring
|
||
green = tip
|
||
yellow = ground (connected to l1 ringer coil in individual and
|
||
bridged ringer phones (bell only)) usually connected to the
|
||
green (tip)
|
||
|
||
ring (-) = red
|
||
white/red stripe
|
||
brown
|
||
white/orange stripe
|
||
black/yellow stripe
|
||
|
||
tip (+) = green (sometimes yellow, see above ^)
|
||
white/green stripe
|
||
white/blue stripe
|
||
blue
|
||
black/white stripe
|
||
|
||
ground = black
|
||
yellow
|
||
***************************************
|
||
----------------------
|
||
residence terminal box
|
||
----------------------
|
||
|
||
small, gray (can be either a rubber (pacific telephone) or hard plastic (at &
|
||
t) housing) deal that connects the cable pair from the splitter box (see type
|
||
2, above) on the pole to your house wiring. Only 2 (or 4, the 2 top terminals
|
||
are hooked in parallel with the same line) terminals , and is very easy to use.
|
||
this can be used to add more lines to your house or add an external line
|
||
outside the house.
|
||
***************************************
|
||
well, now you can consider yourself a minor expert on the terminals and
|
||
wiring of the local telephone network. now you can apply it to whatever you
|
||
want to do..
|
||
|
||
I hope the article was informative. Be looking for 'invading the bell system
|
||
- part II'
|
||
***************************************
|
||
Call The Works BBS - 1600+ textfiles! - [914]/238-8195 - 300/1200 - Always open
|
||
|