354 lines
12 KiB
Plaintext
354 lines
12 KiB
Plaintext
(>---------------------------------------------------------------------------<)
|
||
The LOD/H Technical Journal: File #6 of 12
|
||
|
||
|
||
+--------------------------------+
|
||
| Building Your Own Blue Box |
|
||
+--------------------------------+
|
||
|By|
|
||
|Jester Sluggo|
|
||
|Released: Nov. 27, 1986 |
|
||
+--------------------------------+
|
||
|
||
|
||
|
||
This Blue Box is based on the Exar 2207 Voltage Controlled Oscillator.
|
||
There are other ways to build Blue Boxes, some being better and some not as
|
||
good, but I chose to do it this way. My reason for doing so: because at the
|
||
time I started this project, about the only schematic available on BBS's was
|
||
the one written by Mr. America and Nickie Halflinger. Those plans soon (in
|
||
about 90 seconds) became very vague in their context with a couple in-
|
||
consistencies, but I decided to "rough it out" using those plans (based on the
|
||
Exar 2207 VCO) and build the Blue Box using that as my guide. During the
|
||
construction of the Blue Box, I decided to type-up a "more complete and clear"
|
||
set of Blue Box schematics than the file that I based mine on, in order to help
|
||
others who may be trying/thinking of building a Blue Box. I hope these help.
|
||
|
||
Note: You should get a copy of the Mr. America/Nickie Halflinger Blue Box
|
||
plans. Those plans may be of help to anyone who may have difficulty
|
||
understanding these plans. Also, these plans currently do not support CCITT.
|
||
|
||
+---------------------------------+
|
||
| Why should I build a Blue Box ? |
|
||
+---------------------------------+
|
||
|
||
Many of you may have that question, and here's my answer. Blue Boxing was
|
||
the origin of phreaking (excluding whistling). Without the advent of Blue
|
||
Boxes, I feel that some of the advances in the telecommunications industry
|
||
would've taken longer to develop (The need to stop the phone phreaks forced
|
||
AT+T Bell Laboratories to "step up" their development to stop those thieves!).
|
||
There is no harm in building a Blue Box (except the knowledge you will
|
||
gain in the field of electronics). Although there are software programs (Soft
|
||
Blue Boxes) available for many micro's that will produce the Blue Box
|
||
Multi-Frequency (MF) tones, they are not as portable as an actual Blue Box (you
|
||
can't carry your computer to a telephone, so you must use it from home which
|
||
could possibly lead to danger).
|
||
Many phreaks are announcing the end of the Blue Box Era, but due to
|
||
discoveries I have made (even on ESS 1A and possibly ESS 5), I do not believe
|
||
this to be true. Although many people consider Blue Boxing "a pain in the
|
||
ass", I consider Blue Boxing to be "phreaking in its' purest form". There is
|
||
much to learn on the current fone network that has not been written about, and
|
||
Blue Boxes are necessary for some of these discoveries. The gift of free fone
|
||
calls tends to be a bonus.
|
||
|
||
Note: Blue Boxes also make great Christmas gifts!
|
||
|
||
+---------------------------------------+
|
||
| Items needed to construct a Blue Box. |
|
||
+---------------------------------------+
|
||
Here is the list of items you will need and where you can get them. It
|
||
may be a good idea to gather some of the key parts (the chips, and especially
|
||
the potentiometers, they took about 6 months to back order through Digi-key. A
|
||
whole 6 fucking months!) before you start this project. Also, basic
|
||
electronics tools will be necessary, and you might want to test the circuit on
|
||
a bread board, then wire-wrap the final project. Also, you will need a box of
|
||
some sort to put it in (like the blue plastic kind at Radio Shack that cost
|
||
around $5.00).
|
||
|
||
Note: An oscilliscope should be used when tuning in the
|
||
potentiometers because the Bell system allows
|
||
only a 7-10% tolerance in the precision of the
|
||
frequencies.
|
||
|
||
Qty. ItemPart No.Place
|
||
---------------------------------------------------
|
||
1 | 4 x 4 Keypad|| Digi-Key
|
||
6 | Inverter Chip| 74C04|
|
||
32 | Potentiometer||
|
||
1 | 4-16 Converter Chip| 74LS154|
|
||
1 | 16 Key Decoder| 74C922|
|
||
2 | 2207 VCO| XR2207CP | Exar Corp.
|
||
3 | .01 uf Capacitor | 272-1051 | Radio Shack
|
||
5 | .1 uf Capacitor | 272-135| Radio Shack
|
||
2 | 1.5K Ohn Resistor || Radio Shack
|
||
2 | 1.0K Ohm Resistor || Radio Shack
|
||
1 | Speaker|| From an old Autovon fone.
|
||
1 | 9 Volt Battery|| Anywhere
|
||
|
||
The resistors should be a +/- 5% tolerance.
|
||
The speaker can be from a regular telephone (mine just happened to be from
|
||
an old Autovon phone). But make sure that you remove the diode.
|
||
The Potentiometers should have a 100K Ohm range (but you may want to make
|
||
the calculations yourself to double check).
|
||
The 9-volt battery can be obtained for free if you use your Radio Shack
|
||
Free Battery Club card.
|
||
The Exar 2207 VCO can be found if you call the Exar Corp. located in
|
||
Sunnyvale, California. Call them, and tell them the state you live in, and
|
||
they'll give the name and phone number to the distributor that is located
|
||
closest to you. The 2207 will vary from about $3.00 for the silicon-grade
|
||
(which is the one you'll want to use) to about $12.00 for the high-grade
|
||
Military chip.
|
||
Note: When you call Exar, you may want to ask them to send you the
|
||
spec-sheets that gives greater detail as to the operation and construction of
|
||
the chip.
|
||
|
||
+-------------------+
|
||
| Schematic Diagram |
|
||
+-------------------+
|
||
|
||
+--------------++-------------+
|
||
| 1 2 3 A || Figure #1 |
|
||
| 4 5 6 B |+-------------+
|
||
| 7 8 9 C || Logic Side |
|
||
| * 0 # D |+-------------+
|
||
++-+-+-+-+-+-+-+
|
||
1 | 3 | 5 | 7 |(VCC)
|
||
| 2 | 4 | 6 | 8(+5 Volts) +----+
|
||
| | | < u | | |[+]| _|_
|
||
| | | | | | | ||| \_/GND
|
||
+--+-+-+-+-+-+-+-+----++--+----------+---+
|
||
| 2 | 11| 10| 7 | || 147 |
|
||
(.01C) | | 3 | 4 | 8 | 1 12+------+1|
|
||
+--||---+513+------+2 (*74C04*) |
|
||
_|_||||
|
||
\_/GND |(*74C922*)|+-----------------+
|
||
+--||-+6|
|
||
|(.1C)||
|
||
_|_ ||
|
||
\_/GND | 9 17 16 15 14 18|
|
||
+--+--+--+--+--+---+--+
|
||
| | | | | |
|
||
_|_ A B C D |
|
||
GND\_/ | | | | [+] (VCC)[+] (VCC)
|
||
| | | |(+5 volts) | (+5 volts)
|
||
| | | ||
|
||
-------+--+--+--+------------------+-----------------
|
||
|23 22 21 202418+-+
|
||
+-----+12| +--+
|
||
||(*74LS154*)19+-+ _|_
|
||
_|_ || \_/
|
||
\_/GND | 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 | GND
|
||
+--+--+--+--+--+--+--+--+--+-+--+--+--+--+--+--+----+
|
||
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
|
||
| | | | | | | | | | | | | | | |
|
||
| (Connects)
|
||
| +---------->
|
||
+------------------------+ | (Figure 2)
|
||
|+--++-------+
|
||
|| ||
|
||
+--+-------+--+-------+---+
|
||
| 3--|>o--4 5--|>o--6 |
|
||
| (Invtr.) (Invtr.) |
|
||
+---------------+7|
|
||
_|_|(*74C04*)|
|
||
GND\_/ (VCC) [+]--+14|
|
||
(+5 volts) ||
|
||
+-------------------------+
|
||
|
||
|
||
|
||
+-------------+_
|
||
| Figure #2 |/ |
|
||
+---+-------------+----++----------------+ |
|
||
| Tone Generation Side |_|_| | SPKR
|
||
+----------------------+GND\_/ +---+--+---+ |
|
||
| |\_|
|
||
| |
|
||
| | +---------------+
|
||
+-------+| | ||
|
||
|_|_| +--+14|
|
||
|\_/GND|| (Repeat of) |
|
||
||| (First) |
|
||
----- (.1C)|| (Circuit) |
|
||
-----|||
|
||
||| (*XR2207CP*) |
|
||
|+-----------------+ | +--+6|
|
||
||| | | ||
|
||
[+]-----+-------+114+--+ | +---------------+
|
||
(VCC)||+--------------------+
|
||
(+9 Volts) +----+2||
|
||
| |12+---------------------+|
|
||
(.01C) ----- ||_|_ |
|
||
----- | (*XR2207CP*) |\_/GND |
|
||
| ||1.5K Ohms|
|
||
+----+311+---+---\/\Rx/\/---+--+|
|
||
|| || _|_ |
|
||
|| +---\/\Rx/\/---+ \_/GND |
|
||
||1.0K Ohms|
|
||
|10+----+|
|
||
+-------------+69+----+---+|
|
||
||8+----+ ||
|
||
|||----- (.1C)|
|
||
|+-----------------+-----|
|
||
+---------+_|_+----------+
|
||
|| Pot.GND\_/ Pot. ||
|
||
|\/\/\/\/--+-----------------------\/\/\/\/|
|
||
|1400 Hz. |1600 Hz.|
|
||
+---------+|+----------+
|
||
|| Pot. |Pot. ||
|
||
|\/\/\/\/--+----------------+------\/\/\/\/|
|
||
|1500 Hz. ||900 Hz.|
|
||
||||
|
||
|14 more||14 More|
|
||
| Potentiometers ||Potentiometers |
|
||
|in this||in this|
|
||
| area left out ||area left out|
|
||
| for simplicity ||for simplicity |
|
||
||||
|
||
||||
|
||
|
|
||
(Connects) |
|
||
<-------------+
|
||
(Figure 1)
|
||
|
||
|
||
+-------------------------+
|
||
| Multiplex Keypad System |
|
||
+-------------------------+
|
||
|
||
First, the multiplex pattern used in the 4x4 keypad layout. I suggest that
|
||
keys 0-9 be used as the Blue Box's 0-9 keys, and then you can assign A-D, *, #
|
||
keys to your comfort (ie. * = Kp, # = St, D = 2600, and A-C as Kp1, Kp2 or
|
||
however you want).
|
||
|
||
Note: On your 2600 Hz. key (The D key in example above)
|
||
it may be a good idea to tune in a second
|
||
potentiometer to 3700 Hz. (Pink Noise).
|
||
|
||
KeypadKey Assignments Multiplex Pattern
|
||
+---------+ +-------------+ +------------+
|
||
| 1 2 3 A | | 1 2 3 4 | | 1 2 3 A |----Y1=8 X1=3
|
||
| 4 5 6 B | | 5 6 7 8 | | 4 5 6 B |----Y2=1 X2=5
|
||
| 7 8 9 C | | 9 10 11 12 | | 7 8 9 C |----Y3=2 X3=6
|
||
| * 0 # D | | 13 14 15 16 | | * 0 # D |----Y4=4 X4=7
|
||
+---------+ +-------------+ +------------+
|
||
| | | |
|
||
X1 X2 X3 X4
|
||
|
||
+----------------------+
|
||
| Blue Box Frequencies |
|
||
+----------------------+
|
||
|
||
This section is taken directly from Mark Tabas's "Better Homes and Blue
|
||
Boxing" file Part 1.
|
||
|
||
Frequenies (Hz) Domestic Int'l
|
||
----------------------------------
|
||
700+90011
|
||
700+110022
|
||
900+110033
|
||
700+130044
|
||
900+130055
|
||
1100+130066
|
||
700+150077
|
||
900+150088
|
||
1100+150099
|
||
1300+150000
|
||
|
||
700+1700ST3pCode 11
|
||
900+1700STpCode 12
|
||
1100+1700KPKP1
|
||
1300+1700ST2pKP2
|
||
1500+1700STST
|
||
2600+3700*Trunking Frequency*
|
||
|
||
Note: For any further information about the uses or duration of the
|
||
frequencies, read the Mark Tabas files.
|
||
|
||
+----------------+
|
||
| Schematic Help |
|
||
+----------------+
|
||
|
||
This is the Key to the diagrams in the schematic. I hope that they help
|
||
more then they might hurt.
|
||
|
||
_|_
|
||
\_/GND is the Ground symbol
|
||
|
||
| |
|
||
---| |-- is the Capacitor symbol
|
||
| |(.1C) stands for a .1 uf Capacitor
|
||
(.01C) stands for a .01 uf Capacitor
|
||
|
|
||
-----
|
||
-----is another Capacitor symbol
|
||
|
|
||
|
||
--\/\Rx/\/-- is the Resistor symbol (The 1.5K Ohm and 1.0K Ohm
|
||
Resistors are at +/- 5% )
|
||
---+
|
||
|
|
||
\/\/\/\/-- is the Potentiometer symbol (The frequncies I supplied
|
||
above are just examples.)
|
||
--|>o--is the Inverter symbol
|
||
|
||
+------------+
|
||
| Conclusion |
|
||
+------------+
|
||
|
||
This is just one way to build a Blue Box. If you choose this way, then I
|
||
hope this file is adequate enough to aid you in the construction. Although
|
||
these are not the best plans, they do work. This file does not tell you how to
|
||
use it or what to do once it's built. For that information I mention that you
|
||
read Mark Tabas's "Better Homes and Blue Boxing" files, or any other files/BBS
|
||
subboards that deal with that realm.
|
||
If you need help, I sluggest (thanks for that one Taran) that you ask a
|
||
close friend, possibly an electronics teacher, or a phreak friend to help you.
|
||
Also, if you need help or have questions or comments about this file, you can
|
||
address them to me. I can be contacted through the LOD/H Technical Journal
|
||
Staff account on the boards listed in the Intro, or on the few boards I call.
|
||
|
||
+-------------+
|
||
! Credentials !
|
||
+-------------+
|
||
|
||
At last, this article would not be possible without the help of the
|
||
following people/places whom contributed to it in one way or another (it may
|
||
not be apparent to them, but every minute bit helps).
|
||
|
||
Deserted Surfer (Who helped immensly from Day 1 of this project.)
|
||
(Without his help this file would not be.)
|
||
Mark Tabas(For the BHBB files which inspired my interests.)
|
||
Nickie Halflinger (For the original Blue Box plans I used.)
|
||
Mr. America(For the original Blue Box plans I used.)
|
||
Lex Luthor
|
||
Cheap Shades
|
||
Exar Corp.
|
||
|
||
Lastly, I would like to thank the United States government for furnishing
|
||
federal grants to this project. Without their financial help, I would have had
|
||
to dish out the money from my own pocket (Approximately $80.00. Egads!)
|
||
|
||
|
||
|
||
Jester Sluggo
|
||
|
||
(>---------------------------------------------------------------------------<)
|
||
|
||
|
||
|
||
|
||
///////////////////////////////////////////////////////
|
||
//The PIRATES' HOLLOW//
|
||
//415-236-2371//
|
||
//over 12 Megs of Elite Text Files//
|
||
//ROR-ALUCARD//
|
||
//Sysop: Doctor Murdock//
|
||
// C0-Sysops: That One, Sir Death, Sid Gnarly & Finn //
|
||
////
|
||
// "The Gates of Hell are open night and day;//
|
||
//Smooth is the Descent, and Easy is the way.." //
|
||
///////////////////////////////////////////////////////
|
||
|
||
Downloaded From P-80 International Information Systems 304-744-2253
|