121 lines
4.4 KiB
Plaintext
121 lines
4.4 KiB
Plaintext
|
|
|
|
Public Message
|
|
Message # 1662 *MM1 TECH Echo*
|
|
To : John A Donaldson
|
|
From : George Hine
|
|
Subject : Kterm
|
|
Date : 94/02/03 03:11:06
|
|
Next Reply is Message 1678
|
|
|
|
Dear John:
|
|
While using Kterm I opened a capture file, downloaded the Tech Echo,
|
|
and then closed the capture file. I proceded with a file download and
|
|
went to another window to read the just downloaded capture file while
|
|
Kterm was still running and found that the file was busy and remained so
|
|
until I terminated Kterm. Would it be possible to change the program to
|
|
unlock the capture file when it is closed instead of when the program is
|
|
terminated? Thanks, George
|
|
|
|
--- RiBBS v2.10
|
|
* Origin: Ocean Beach BBS 619-224-4878 MM1 TECH moderator (1:202/343)
|
|
|
|
|
|
Public Message
|
|
Message # 1678 *MM1 TECH Echo*
|
|
To : George Hine
|
|
From : Warren Hrach
|
|
Subject : Re: Kterm
|
|
Date : 94/02/03 09:39:40
|
|
Previous Reply is Message 1662
|
|
|
|
On Thursday, February 3rd, 1994 - George Hine wrote:
|
|
|
|
GH> While using Kterm I opened a capture file, downloaded the Tech Echo,
|
|
GH> and then closed the capture file. I proceded with a file download and
|
|
GH> went to another window to read the just downloaded capture file while
|
|
GH> Kterm was still running and found that the file was busy and remained
|
|
GH> so until I terminated Kterm. Would it be possible to change the
|
|
GH> program to unlock the capture file when it is closed instead of when
|
|
GH> the program is terminated? Thanks, George
|
|
|
|
George,
|
|
I have tested this feature of Kterm both over my null modem and
|
|
over a Anchor 2400 modem. I have used the /t3 port for the null modem
|
|
and /t0 port for my Anchor modem. I find that I have no problems
|
|
listing the file in another window even with the capture file still
|
|
open (ALT C) Of course it lists with extra spacing and if I call Ved
|
|
and list the file I can set it up with real CR's and then the extra
|
|
spacing is gone.
|
|
This is after I close the capture buffer.
|
|
Now I have hardware handshaking set but doubt that is what the diff. is,
|
|
maybe it is your 68340 cpu ? I recall something about the 68340 UG
|
|
having new serial drivers for the rs232 ports, could this be it ??
|
|
BTW I recall you mentioned sending me your revised 8 Meg upgrade
|
|
documentiation file when you got it debugged. Can you still do this ??
|
|
|
|
-Warren
|
|
|
|
--- RiBBS v2.10
|
|
* Origin: Ocean Beach BBS 619-224-4878 MM1 TECH moderator (1:202/343)
|
|
|
|
|
|
Public Message (Rec)
|
|
Message # 1777 *MM1 TECH Echo*
|
|
To : Warren Hrach
|
|
From : Paul Myles
|
|
Subject : Re: Modem Speed
|
|
Date : 94/02/05 03:01:00
|
|
Next Reply is Message 1786
|
|
|
|
WH> Are you using V.42b error control or none ?
|
|
WH> -Warren
|
|
|
|
Warren,
|
|
I have the compression turned off. V.42 is still ON(MNP2-4). I think
|
|
this is right.
|
|
Paul Myles
|
|
|
|
--- GEcho 1.00
|
|
* Origin: Zuul's Catacombs, Coraopolis PA (412) 264-9787 (1:129/164)
|
|
|
|
|
|
Public Message
|
|
Message # 1786 *MM1 TECH Echo*
|
|
To : Paul Myles
|
|
From : Warren Hrach
|
|
Subject : Re: Modem Speed
|
|
Date : 94/02/06 12:43:50
|
|
Previous Reply is Message 1777
|
|
|
|
On Saturday, February 5th, 1994 - Paul Myles wrote:
|
|
|
|
PM> I have the compression turned off. V.42 is still ON(MNP2-4). I think
|
|
PM> this is right.
|
|
|
|
Paul,
|
|
I have always stuck with V.42b but my ZyXEL will connect with
|
|
MNp1-4. I have mnp5 disabled on someone elses advice.
|
|
The biggest thing is the fact I just discovered that RiBBS and lock
|
|
baud will work fine, just so long as you disable flow control on the
|
|
modem. I am useing Aciadrv and its /t2 for my bbs along with Nitros9
|
|
and the ZyXEL set up with flow control off and lock baud on at 9600.
|
|
The problems with the hardware handshaking are gone and noone
|
|
connecting at 12, 24, 9600, 14,400 or 16,800 baud has one bit of char.
|
|
loose or up/downloading problem. Previous to this I had hardware
|
|
handshaking enabled and the RS232pak could not handle the interupts.
|
|
Now with it disabled no more dropped chars. Its great, I am very pleased
|
|
with my ZyXEL at this time.
|
|
So anyone that calls here and had to use v.32 in lieu of v.32b can
|
|
just call at v.32b no problem now.
|
|
-Warren, RiBBS beta sysop, MM/1 Sales Rep.
|
|
|
|
--- RiBBS v2.10 (Beta)
|
|
* Origin: Ocean Beach BBS 619-224-4878 MM1 TECH moderator (1:202/343)
|
|
|
|
=*= FIDO ECHO MESSAGES MENU =*=
|
|
|
|
<1> Scan \
|
|
<2> Read > OS9 Echo mail
|
|
<3> Leave /
|
|
<4> Scan \ |