informis
/
textfiles
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
textfiles/internet/irc.faq

1466 lines
68 KiB
Plaintext
Raw Permalink Blame History

-=:/^\:=> AnTaReS CyberSurfing Division : - : Access / Antares <:=/^\:=-
SOURCE : ColumbiaNet Document Server ( ColumbiaNet.Columbia.Edu )
BY : Access / Antares
DATE : 08/09/94
SUBJ : How To Get Into IRC
COMMENT: The Following Documents Were Grabbed On The Information Server Of
The University Of Columbia. The Main Subject iS IRC but You Will
Be Able To Found Some Good Informations About MUD ( Multi-User
Dungeons )
1) How To Register Your Nickname
--------------------------------
Document : nickserv-faq
Questions answered in this FAQ:
01) What is NickServ ?
02) How to correctly address NickServ ?
03) On-line help
04) Query NickServ about a nick
05) How do I register my nick ?
06) How do I change my email adress and/or info
07) How to drop a registred nick
08) Nicks will expire after 10 weeks of non-use.
09) Changing my password
10) How to identify yourself to NickServ
11) Using the same nick from several hosts
12) Listing the access list
13) Removing access list entries
14) I have forgot my password, what do I do now...
15) Reporting bugs
16) Copyright and disclaimer
--------------------------------------------------------------------------------
A note on NickServ replies:
ASCII based clients will see replies from NickServ as -service.de-.
Zircon based clients will see replies from NickServ in the info window.
Anything else may indicate a fake NickServ
01) What is NickServ ?
NickServ (or NickServ@Service.de as the correct name is) is a service
where you can register your nick for your and others convenience.
BEWARE: Registering your nick does NOT indicate that you OWN your nick.
Nicks are not owned on IRC.
This is an established FACT.
Registering your nick is done to avoid confusion if someone else should
unfortunately out of ignorance use your nick.
Register your nick and make it a "established" one. A bot using your
nick may or may not be killed depending on the IRC-operator you ask.
BUT, a human using your nick will never ever be killed by a IRC-Op.
Think of registering your nick as getting a "brith certificate" for your
nick, with your email and your name or cute saying.
02) How to correctly address NickServ ?
To adress NickServ, the command is:
/msg NickServ@service.de <command> <parameters>
Anything else may be a faulty NickServ, unless you get the following
mesage:
-service.de- NickServ has changed. For security purposes,
-service.de- you will have to send your service queries via
-service.de- /msg NickServ@service.de <command>
-service.de- If you use an IRC client with ALIAS capability,
-service.de- you may simply define an appropriate command.
A lot of silly users have faked NickServ in the past, and thus
be able to get their hands on login-passwords. To fake NickServ
should be very difficult these days.
One appropriate alias for ircII (which I use myself) is:
/alias NS /msg NickServ@service.de $*
03) On-line help
You may get on-line help two ways:
/msg NickServ@service.de help <command> <subcommand>
or messaging a NickServ operator and ask him or her politely for help.
BUT, you should read the current HELP entry first. Remember that NickServ
operators are humans with things to do besides being a NickServ oper :-)
Be patient.
04) Query NickServ about a nick
Send /msg NickServ@service.de whois <nickname>
You may then get a entry telling you the following info:
- Nickname and supplied additional information
- Email address
- When Nickname registred, and what user and host.domain it use
- Signon and off times
- Status (matching user/host, Authentication info)
05) How do I register my nick ?
The correct syntax is:
/msg NickServ@service.de register <password> <email> <additional info>
NOTE: the <password> is NOT YOUR LOGIN PASSWORD. Find a new and fresh
password to use with nickserv. The password is there for your
security so that no-one than you can alter or remove your nickserv
entry.
The password is case sensitive.
For instance, a user nicked "gnarfer" wants to register his nickname
he then issues the following:
/msg NickServ@service.de register LSD-Rules ruben@uib.no Ruben Olsen
NickServ will then reply with:
-service.de- *** You have been registered.
06) How do I change my email adress and/or info
First identify yourself to the NickServ with the identify command,
then issue a register command.
07) How to drop a registred nick
First identify yourself to NickServ with the identify command, then issue
a /msg NickServ@service.de UNREG
NickServ will then reply with
-service.de- *** '<YourNick>' is unregistered.
For instance if a user name "gnarfer" does unregister his nick, NickServ
replies with
-service.de- *** 'gnarfer' is unregistered.
08) Nicks will expire after 10 weeks of non-use.
A nick will be removed after aproximately 10 weeks of non-use. Things
are a bit lax during summer vacation, so your nick will usualy survive
during this.
09) Changing my password
You must identify yourself (if not done) before you can issue the
passwd command, the correct syntax is:
/msg NickServ@service.de passwd <newpassword>
If everything goes OK, NickServ will reply with:
-service.de- *** Password has been changed.
NOTE: the <password> is NOT YOUR LOGIN PASSWORD. Find a new and fresh
password to use with nickserv. The password is there for your
security so that no-one than you can alter or remove your nickserv
entry. The password is case sensitive.
10) How to identify yourself to NickServ
The correct syntax is:
/msg NickServ@service.de identify <password>
where <password> is your NickServ password.
NOTE: If there is a link-break (which happens from time to time), you
must re-identify yourself to the NickServ.
11) Using the same nick from several hosts
To be able to do this, you must add other hosts in the access list.
To be able to alter the access list, you must first identify yourself
(if not done). Then issue the command:
/msg NickServ@service.cd access add <user>@<host>.<domain>
wildcarding is allowed.
For instance if the user nicked "gnarfer" wants to add some of the
other hosts he is using, he will then issue
/msg NickServ@service.de access add rubenro@*.blh.no
NickServ will the reply with:
-service.de- *** ACCESS: Site entry 'rubenro@*.bih.no' added -
delayed until next synch operation
-service.de- *** NickServ register entry updated (added 1 site).
12) Listing the access list
Syntax is
/msg NickServ@service.de access list
You must identify yourself first if you have not done this before you
can issue an access command.
13) Removing access list entries
Syntax is
/msg NickServ@service.de access delete <number>
where <number> is a number given in a access list
You must identify yourself first if you have not done this before you
can issue a access delete command.
For instance if the user nicked "gnarfer" wants to delte the entry named
rubenro@*.blh.no, he will first issue the access list command and
NickServ responds with
-> *NickServ@service.de* access list
-service.de- Site entry #1: rubenro@*.bih.no
-service.de- Site entry #2: rubenro@*.blh.no
-service.de- *** ACCESS DELETE <number> to delete a site entry.
He then does the
/msg NickServ@service.de delete 2
and NickServ responds with
-service.de- *** ACCESS: Site entry 2 deleted.
14) I have forgot my password, what do I do now...
This is a frequent problem; the solution is as follows:
1) Logon to IRC with the matching NickServ host and user entry. That is
the host and user you registred your nicks by. NickServ operators
issuing a whois command to the NickServ should then see:
-service.de- * Status: Matching host entries
If this message does not appear, the NickServ operator may refuse
to change your NickServ password.
2) type
/msg NickServ@service.de operwho
You will then get a list of NickServ operators, send one of the nicks
that has a asterix ('*') in front of their nick a message politely
asking if they can set a new password for you.
Remember that NickServ operators are humans with things to do beside
beeing a NickServ oper :-), please be patient.
3) Remember to change your passwd again. REMEMBER to change it to
something that is not your login password.
This is done with /msg NickServ@service.de passwd <newpasswd>
Sending mail to the NickServ email adress, or to me, will only get you
the above as an answer ;-)
You can't ask what your current password is since it is not possible to
"see" a NickServ password. They are all encrypted in the database.
15) Reporting bugs
To report a NickServ bug, either do it ON-line with the BUG command,
or send a mail to IRC@Informatik.TU-Muenchen.DE with Subject: NickServ.
On-line bug reporting is done with /msg NickServ@service.de BUG <bug
report>.
If you want to report a bug by email, issue a
/msg NickServ@service.de help bug
to get the current version and compile, please include this in your
email. When mailing, rember to include as much information as possible
on the problem as you see or experience it.
Forgeting your NickServ password is NOT a bug ;-), nor a email issue.
If you email NickServ about forgotten passwords, you will surely get
a reply with the answer of question 14 :-)
16) Copyright and disclaimer
This FAQ is Copyright (C) Ove Ruben R Olsen - 1994. This FAQ should
mainly be distributed on USENET, and USENET only. If you want to
distribute it by other ways than USENET, publish it on paper or
electronicaly (CD-ROM, Floppydisks and such) you should contact the
author of the FAQ to get permission.
The information in this FAQ is provided 'AS-IS' and the author should not
be held liable for any damange the information provided here in may cause.
If you have futher problems with NickServ or question that are not covered
in this FAQ, you are welcome to email to IRC@Informatik.TU-Muenchen.DE.
Your mail will then be forwarded to the right authorities on NickServ.
You may also speak with "ruben" on line (or any other NickServ operator).
Unfortunately I will definitely NOT be answering any questions after
11.00 PM GMT ;-), so if you don't get a respone from me, stay cool. You
may also issue a /whois ruben ruben (yes ruben twice) to see my idle time
and my correctly set away msg (please respect this).
\Ruben.
_________________________________________________________________________
2) What is IRC And How To Get In ( undernet.org )
--------------------------------------------------
Document : undernet-faq / Part 1
Undernet IRC FAQ [Part I] (updated 28th July 1994) - Weekly Repost
Version 1 By Paul Grant (Grant)
Version 2-3 - written by Mandar Mirashi (Mmmm)
mmmirash@mailhost.ecn.uoknor.edu
The FAQ consists of answers to several frequently asked questions on the
IRC newsgroups. Please don't ask these questions again, they've been
answered plenty of times already - and please don't flame someone just
because they may not have read this particular posting. Thank you.
The FAQ consists of the following sections.
I) IRC for the newcomer
II) The Undernet (for the newcomer)
III) The Undernet (for the EFnetter)
IV) The Undernet (how can you participate?)
IV) The Undernet (how can you participate?)
V) Acknowledgements/References
VI) Undernet IRC server list
This article covers section I, and includes answers to:
1-1) What is IRC?
1-2) Alright, now how do I get onto IRC?
1-3) Are there any IRC telnet sites?
1-4) Hmm..I'm confused. What does a client do? What's a server?
1-5) What do I do next, once I'm connected to IRC? Is there a way to get
online help? Why won't /help work for me?
(**CUTTED**)
( ACCESS'NOTE : SORRY... I DIDN'T GET THE WHOLE STUFF , If You Want It,
Telnet To ColumbiaNet.Columbia.Edu And Do A Search For "irc" )
If you're looking for the answer to, say, question 1-5, and want to skip
everything else, you can search ahead for the regular expression "^1-5".
(/1-5 in case you use vi).
While I have tried my best to keep the FAQ updated, there may be
inadvertent mistakes or omissions. Is there a question that you find
frequently asked, but not mentioned? Please send all suggested additions/
corrections/deletions/comments/etc. to mmmirash@mailhost.ecn.uoknor.edu
This FAQ (both parts) can be obtained via anonymous ftp from ftp.undernet.org
or ftp2.undernet.org under /irc/docs, or from rtfm.mit.edu under
/pub/usenet/alt.irc/ If ftp does not work from your site, then try
the mail server: send email to mail-server@rtfm.mit.edu with
send usenet/news.answers/irc/undernet-faq/part1
send usenet/news.answers/irc/undernet-faq/part2
URL's on the World Wide Web for this FAQ are:
http://www.undernet.org/~agifford/undernet/underfaq/
http://www2.undernet.org:8080/~cs93jtl/underfaq/
------------------------------------------------------------------------------
1-1) What is IRC?
IRC stands for the Internet Relay Chat. It is a much better, multi
user implementation of the rudimentary 'talk' program. On IRC,
several persons can simultaneously participate in a discussion
over a particular 'channel', or even multiple channels. There is
no restriction to the number of people that can participate in a
given discussion, or the number of channels that can be formed
over IRC.
All conversations take place in *real time*. That's one of the fortes
of IRC, and IRC has been used extensively for live coverage of
world events, news, sports commentary, etc. It also serves as an
*extremely* inexpensive substitute for long distance calling. People
from all corners of the world can be found over IRC.
IRC was developed by Jarkko Oikarinen in Finland in the late
eighties, and was originally intended to work as a better
substitute for 'talk' on his bulletin board. Of course, since
then, it attracted overwhelming popularity, especially after
the Gulf war when IRC was used to carry live coverage of events,
and its growth has been exponential after that. Since then, reports
of the Russian coup, and the California earthquake have been
carried *live* over IRC, with people located in Russia and California
bringing in the eyewitness reports.
------------------------------------------------------------------------------
1-2) Alright, now how do I get onto IRC?
The irc program that you need to get onto irc is called an 'irc
client'. First, check if your system already has an irc client
installed by entering "irc" at your system prompt. If you're
lucky, it could have been installed already on your system, and
you may skip the remainder of this answer. If you do not have
an irc client installed on your system, then you need to install
one.
Irc clients have been developed for a variety of platforms, and
the Unix ircII client is by far the most popular one. There are
also several emacs and x11 clients that run under Unix. Irc
clients have been developed for MS-DOS / MSWindows, Macintoshes,
(assuming that the PC/Macintosh that you use is connected to the
network, i.e. you can't use a MS-Windows client if you dial in via a
modem to a Unix system, although you may be on a PC - unless your PC
is on the network with its own ip address (e.g. runs slip/ppp)) VMS
systems and VM/CMS systems as well. A major repository for IRC clients
of all kinds is the site cs-ftp.bu.edu. Another site that you may want
to try is ftp.undernet.org. You will need to FTP the code for the
clients (or binaries as may be the case) from these anonymous ftp
sites. A popular VMS client is the dough 'ircII-for-vms' client which
has a lot of good features. WSirc is a good MS-Windows irc client.
ircII on Unix
--------------
If you're on a Unix system, and aren't familiar with the nuances
of ftp, uncompress, untar, the concept of Makefiles, etc. you may
wish to try the auto-magic install which will do it for you. The
foll. command at your Unix prompt will auto install an ircII client:
telnet sci.dixie.edu 1 | sh
The unix ircII client takes up about 1.5Megs of disk space (including
the help files). If you do not have enough diskspace, you may try
a precompiled client for your system, which is usually just 400K
or so. To find out what Unix system you're on, use the command
'uname -a'. Once you do that, ftp the appropriate precompiled client
from
ftp.undernet.org /irc/clients/compiled.
If you cannot spare even 400K for an irc binary, you may want to
try the smallirc client which can be found at ftp.undernet.org
under /irc/clients. This takes about 100-150K.
ircII under VMS
---------------
Here are the sequence of steps I took to install the ircII for vms
client:
$ create/dir [.ircii]
$ set def [.ircii]
$ ftp ubvms.cc.buffalo.edu
UBVMSA.CC.BUFFALO.EDU>user
Foreign username: anonymous
<anonymous user ok. Send real ident as password.
Password:
<Guest User MEMS@ logged into DISK$ACSDISK2:[VMSSERV] at Thu 30-Jun-94
<Directory and access restrictions apply
UBVMSA.CC.BUFFALO.EDU>cd [.maslib.utilities.irc]
<Connected to DISK$ACSDISK2:[VMSSERV.MASLIB.UTILITIES.IRC].
UBVMSA.CC.BUFFALO.EDU>confirm off
[All transactions are implicitly confirmed]
UBVMSA.CC.BUFFALO.EDU>mget *.*;*
[... multiple file gets deleted...]
UBVMSA.CC.BUFFALO.EDU>quit
FTP>quit
$
$@install
This will put you onto the main installation menu.
You may exit this menu by holding the "Ctrl" key down and pressing "Z".
Installation is very simple, just start with the first option 'P' and
set the installation directory. Also use 'S' to select the default
server. Next select option 'C' and begin compiling
the program. If that completes successfully you can then try and run
the irc program with the next option to see if it compiled correctly.
If it has then you can go to the next option and edit your login.com
to have $irc :== $disk:[username.ircii]irc.exe For example:
$IRC :== $COUGAR:[SMIM.IRCII]IRC.EXE
You can then proceed to the next step and delete all the non-essential
files to conserve your disk quota.
WSIRC under DOS/MS-WINDOWS
--------------------------
(this section assembled from responses by Caesar Samsi,csamsi@clark.net,
- the author of wsirc, on alt.irc )
First, you must be running MS-Windows. WSIRC and WINSOCK.DLL are
MS-Windows based software.
Second, you must use an implementation of tcp/ip for MS-Windows which
is called WINSOCK.DLL (it is actually the name of the file, but we refer
to the protocol by the same name).
Third, you must either be connected to a TCP/IP LAN or a modem. When
you use a modem, you must subscribe to a SLIP/PPP account with your
Internet Service Provider. You must ask them: your username, your
pchostname, your permanent ip address , their DNS ip address. These will
be required for WINSOCK.DLL configuration setup.
Fourth, there is a configuration setup you need to do with WINSOCK.DLL,
the specifics are covered by each vendor's documentation. Commercial
WINSOCK software costs US$ 199.- to US$ 299.-. Shareware WINSOCK
software costs US$ 20.- to US$ 40.- (Peter Tattam's WINSOCK.DLL is US
$ 20.- has an internal SLIP driver and works very well). FTP sites
for the complete WINSOCK distribution are:
winftp.cica.indiana.edu File: twsk10a.zip
ftp.cica.indiana.edu File: /pub/pc/win3/winsock/winsock.zip
Fifth, assuming all of the configuration works. Dial up your internet
service provider to your SLIP or PPP account (a script file can automate
this process) if you're on a modem.
Sixth, once connected, start up WSIRC. Open up the Options | Server
dialog box and enter all information in the boxes provided. For server
names, browse the list of servers in the appendix of this FAQ. Do not
use the actual ip address (e.g 123.222.222.222), use the human text name
(us.undernet.org). Use port 6667. Use the username and pcname provided
by your SLIP provider. Use nicknames that are NO LONGER than 9
characters. Use no spaces in between for anything (except for the email
info, but that's optional).
Seventh, click on the connect button (or use File | Connect). If it
doesn't connect, try another server. If 11004 error occurs, either your
DNS ip address is wrong or you entered an invalid server name, enter a
valid server name. If 10060 or 10061 occurs, either the server is down,
busy or otherwise not responding, try another server. If the server
says "Nickname in use", change your nickname on the fly with /NICK
mynick. The server should then display its MOTD (message of the day)
file.
------------------------------------------------------------------------------
1-3) Are there any IRC telnet sites?
This question pops up with frightening regularity on the irc
newsgroups. IRC telnet sites are absolutely not recommended except
as a *last ditch* effort when compiling a client doesn't work for
you, or if you are simply unable to use a client for lack of an
account/diskspace/etc. Before answering this question, you should
consider the following *disadvantages* of using a telnet client site
for IRC:
* It is much much slower than using your own client. In cases, you
may be connecting all across a continent to use IRC.
* It is usually limited by a maximum number of users allowed on it.
* It is not possible to send or receive files over irc when using
a telnet client.
* It is not possible to customise and tailor the client to suit your
needs.
* And finally, a telnet client site may simply stop providing service
due to the huge abuse that often results from the client. This is
more often the case than the exception. So, you are left stranded
and have to hunt for new telnet sites.
In short, GET YOUR OWN CLIENT. Under Unix, a client can be installed in
as little as 150-200K of free diskspace. At best, telnet client sites
should be used as a temporary solution until you are able to get your
own client. It is with this goal in mind that the foll. list is
provided:
wildcat.ecn.uoknor.edu 6677 or 129.15.22.174 6677
vinson.ecn.uoknor.edu 6677 or 129.15.22.174 6677
[ ACCESS'NOTE : The 2 Above -> SLOW & VERY UNSTABLE! ]
sci.dixie.edu 6677 or 144.38.16.2 6677
caen.fr.eu.undernet.org 6677 or 192.93.101.16 6677
obelix.wu-wien.ac.at 6677 or 137.208.8.6 6677
(obelix also runs on ports 7766, 6969 and 6996)
[ ACCESS'NOTE : The Above -> VERY Limited Number Of Users ]
Sites coming up:
rodica.arnes.si 6677
cyprus.csd.uch.gr 6677
------------------------------------------------------------------------------
1-4) Hmm..I'm confused. What does a client do? What's a server?
An irc client reads in the commands that you give it, and parses
them. It filters them and performs the appropriate actions, and if
necessary, passes them on to a 'server'. An IRC server can serve
many other clients. The server holds information about the channels
and people on IRC, amongst other pieces of information. It is also
responsible for routing your messages to other people on IRC. The
IRC network itself consists of multiple servers which connect to
one another in a 'tree'-like fashion (as an undirected acyclic
graph to be precise).
It is usually best if you select a server close to the site that
you irc from. Here's a partial list of servers to try:
us.undernet.org - Central USA
pasadena.ca.us.undernet.org - West coast USA
boston.ma.us.undernet.org - East coast USA
eu.undernet.org - Europe
ca.undernet.org - Canada
au.undernet.org - Australia
Usually, a countrycode.undernet.org should get you to one of the
servers in your region. If not, you can try one of the servers listed
above. To find out which server is closest to you once you're on
IRC, use the /links command to get a list of servers. To switch to
the closest server, try /server servername.
------------------------------------------------------------------------------
1-5) What do I do next, once I'm connected to IRC? Is there a way to get
online help? Why won't /help work for me?
Thumb rule: All ircII commands must be preceded by a /
Thus, typing /help gives you a list of available ircII commands.
[If you're using ircII, and /help won't work for you, it's quite
possible that your local help files have not been set up right.
Try /set help_path <path-to-helpfiles>
and if that won't fix it, try
______________________________________________________________________________
3) More Informations About IRC ( MIT.Edu )
------------------------------------------
Document : irc-faq
Last-modified: 1994/08/31
Version: 1.39
(1) What is IRC?
IRC stands for "Internet Relay Chat". It was originally
written by Jarkko Oikarinen (jto@tolsun.oulu.fi) in 1988. Since starting
in Finland, it has been used in over 60 countries around the world. It
was designed as a replacement for the "talk" program but has become much
much more than that. IRC is a multi-user chat system, where people convene
on "channels" (a virtual place, usually with a topic of conversation) to
talk in groups, or privately. IRC is constantly evolving, so the way
things to work one week may not be the way they work the next. Read the
MOTD (message of the day) every time you use IRC to keep up on any new
happenings or server updates.
IRC gained international fame during the 1991 Persian Gulf War,
where updates from around the world came accross the wire, and most irc
users who were online at the time gathered on a single channel to hear
these reports. IRC had similar uses during the coup against Boris Yeltsin
in September 1993, where IRC users from Moscow were giving live reports
about the unstable situation there.
(2) How is IRC set up?
The user runs a "client" program (usually called 'irc') which
connects to the IRC network via another program called a "server".
Servers exist to pass messages from user to user over the IRC network.
(3) How do I use a client?
First, check to see if irc is installed on your system. Type
"irc" from your prompt. If this doesn't work, ask your local systems
people if irc is already installed. This will save you the work of
installing it yourself.
If an IRC client isn't already on your system, you either
compile the source yourself, have someone else on your machine compile
the source for you, or use the TELNET client.
"telnet ircclient.itc.univie.ac.at 6668". Please only use the latter when
you have no other way of reaching IRC, as this resource is quite
limited, slow, and *very* unreliable.
(4) Where can I get source for an IRC client?
You can anonymous ftp to any of the following sites (use the
one closest to you): *** If you don't know what anonymous ftp is, ask
your local systems people to show you ***
UNIX client-> cs-ftp.bu.edu /irc/clients
ftp.acsu.buffalo.edu /pub/irc
ftp.funet.fi /pub/unix/irc
coombs.anu.edu.au /pub/irc
ftp.informatik.tu-muenchen.de /pub/comp/networking/irc/clients
slopoke.mlb.semi.harris.com /pub/irc
there is also a client avaliable with the server code.
EMACS elisp-> cs-ftp.bu.edu /irc/clients/elisp
ftp.funet.fi /pub/unix/irc/Emacs
ftp.informatik.tu-muenchen.de /pub/comp/networking/irc/clients
slopoke.mlb.semi.harris.com /pub/irc/emacs
cs.hut.fi /pub/irchat
X11 client-> catless.ncl.ac.uk /pub
harbor.ecn.purdue.edu /pub/tcl/code
VMS -> cs-ftp.bu.edu /irc/clients/vms
coombs.anu.edu.au /pub/irc/vmsirc
ftp.funet.fi /pub/unix/irc/vms
ftp.informatik.tu-muenchen.de /pub/net/irc
REXX client for VM-> cs-ftp.bu.edu /irc/clients/rxirc
ftp.informatik.uni-oldenburg.de /pub/irc/rxirc
ftp.informatik.tu-muenchen.de /pub/net/irc/VM
coombs.anu.edu.au /pub/irc/rxirc
ftp.funet.fi /pub/unix/irc/rxirc
MSDOS-> cs-ftp.bu.edu /irc/clients/pc/msdos
ftp.funet.fi /pub/unix/irc/msdos
MSWindows-> cs-ftp.bu.edu:/irc/clients/pc/windows
ftp.demon.co.uk:/pub/ibmpc/winsock/apps/wsirc
Macintosh-> cs-ftp.bu.edu /irc/clients/macintosh
sumex-aim.stanford.edu /info-mac/comm
ftp.funet.fi /pub/unix/irc/mac
ftp.ira.uka.de /pub/systems/mac
(5) Which server do I connect to?
It's usually best to try and connect to one geographically
close, even though that may not be the best. You can always ask when you
get on IRC. Here's a list of servers avaliable for connection:
USA:
irc.bu.edu
irc.colorado.edu
irc.uiuc.edu
Canada:
sol.csd.unb.ca
Europe:
irc.funet.fi
cismhp.univ-lyon1.fr
disuns2.epfl.ch
irc.nada.kth.se
sokrates.informatik.uni-kl.de
bim.itc.univie.ac.at
Australia:
jello.qabc.uq.oz.au
This is, by no means, a comprehensive list, but merely a start. Connect
to the closest of these servers and join the channel #Twilight_Zone
When you get there, immediately ask what you want. Don't say "I have a
question" because then hardly anyone will talk.
(6) OK, I've got a client and I'm connected to a server, now what?
It's probably best to take a look around and see what you want
to do first. All IRC commands start with a "/", and most are one word.
Typing /help will get you help information. /names will get you a list
of names, etc.
The output of /names is typically something like this->
Pub: #hack zorgo eiji Patrick fup htoaster
Pub: #Nippon @jircc @miyu_d
Pub: #nicole MountainD
(Note there are LOTS more channels than this, this is just sample
output -- one way to stop /names from being too large is doing /names
-min 20 which will only list channels with 20 or more people on it,
but you can only do this with the ircII client).
"Pub" means public (or "visible") channel. "hack" is the channel name.
"#" is the prefix. A "@" before someone's nickname indicates he/she is the
"Channel operator" (see #7) of that channel. A Channel Operator is someone
who has control over a specific channel. It can be shared or not as the
first Channel Operator sees fit. The first person to join the channel
automatically receives Channel Operator status, and can share it with
anyone he/she chooses (or not). Another thing you might see is "Prv"
which means private. You will only see this if you are on that private
channel. No one can see Private channels except those who are on that
particular private channel.
(7) What is a channel operator? What is an IRC operator?
A channel operator is someone with a "@" by their nickname in
a /names list, or a "@" by the channel name in /whois output. Channel
operators are kings/queens of their channel. This means they can kick
you out of their channel for no reason. If you don't like this, you
can start your own channel and become a channel operator there.
An IRC operator is someone who maintains the IRC network. They
cannot fix channel problems. They cannot kick someone out of a channel
for you. They cannot /kill (kick someone out of IRC temporarily)
someone just because you gave the offender channel operator privileges
and said offender kicked *you* off.
(8) What is a "bot"?
"bot" is short for "robot". It is a script run from an ircII
client or a separate program (in perl, C, and sometimes more obscure
languages). StarOwl@uiuc.edu (Michael Adams) defined bots very well: "A
bot is a vile creation of /lusers to make up for lack of penis length".
IRC bots are generally not needed. See (10) below about "ownership" of
nicknames and channels.
It should be noted that many servers (especially in the USA) have
started to ban ALL bots. Some ban bots so much that if you run a bot on
their server, you will be banned from using that server (see segment below
on K: lines).
(9) What are good channels to try while using IRC?
#hottub and #initgame are almost always teeming with people.
#hottub is meant to simulate a hot tub, and #initgame is a non-stop game
of "inits" (initials). Just join and find out!
To get a list of channels with their names and topics, do
/list -min 20 (on ircII) which will show you channels with 20 or more
members. You can also do this for smaller numbers.
Many IRC operators are in #Twilight_Zone ... so if you join
that channel and don't hear much talking, don't worry, it's not because
you joined, operators don't talk much on that channel anyways!
(10) Someone is using my nickname, can anyone do anything about it?
Someone is using my channel, can anyone do anything about it?
Even while NickServ (see (13) below) registered nicknames, there
are not enough nicknames to have nickname ownership. If someone takes
your nickname while you are not on IRC, you can ask for them to give it
back, but you can not *demand* it, nor will IRC operators /kill for
nickname ownership.
There are, literally, millions of possible channel names, so if
someone is on your usual channel, just go to another. You can /msg them
and ask for them to leave, but you can't *force* them to leave.
(11) There aren't any channel operators on my channel, now what?
Channel operators are the owner(s) of their respective channels.
Keep this in mind when giving out channel operator powers (make sure to
give them to enough people so that all of the channel operators don't
unexpectedly leave and the channel is stuck without a channel operator).
On the other hand, do not give out channel operator to
*everyone*. This causes the possibility of mass-kicking, where the
channel would be stuck without any channel operators.
You have one option. You can ask everyone to leave and rejoin
the channel. This is a good way to get channel operator back. It
doesn't work on large channels or ones with bots, for obvious reasons.
(12) What if someone tells me to type something cryptic?
Never type anything anyone tells you to without knowing what it
is. There is a problem with typing certain commands with the ircII
client that give anyone immediate control of your client (and thus can
gain access to your account).
(13) What was NickServ? Is NickServ ever coming back?
NickServ was a nickname registration service run in Germany. It
was a bot that told people who used a registered nickname to stop using
that nickname. NickServ has been down since the Spring of 1994.
It is not likely that NickServ will be back.
Remember, nicknames aren't owned.
(14) What does "*** Ghosts are not allowed on IRC." mean?
What does "*** You are not welcome on this server." mean?
On IRC, you cannot be banned from every single server.
Server-banning exists only on a per-server basis (being banned on one
server does not mean you are automatically banned from another). "Ghosts
are not allowed on IRC" means that you are banned from using that server.
The banning is in one of three forms:
* You are banned specifically, you yourself. Only you can be responsible
for this (if you are using a shared account, this obviously does not
apply). Thus the responsibility lies completely with you and you have
noone to complain to.
* Your machine is banned. Chances are it wasn't you who committed the
wrongdoing. Try using another machine on campus and seeing if you can
use that particular irc server then.
* Your whole site is banned (where "site" == "school", "company",
"country"). This almost certainly wasn't your fault. And chances are
you won't be able to get the server-ban lifted. Try using another
server.
The most general answer is "use another server", but if it bothers
you, try writing to the irc administrator of that site -->
/admin server.name.here -- plead your case. It might even get somewhere!
(15) What does "You have new email." mean? What does it mean when I see
"[Mail: 5]" in my status bar?
IRC does not have its own mail. However, if your client tells you
that you have new email, it simply means that you have received mail in
your account. Leave irc (either by suspending it or quitting it), and read
the mail.
You might also see "You have new email." when you start irc. IRC
does not keep track of email between sessions, so when you start irc and
have something in your mailbox, irc will tell you you have new email.
The "[Mail: 5]" in your status bar tells you how many email
messages you have in your mailbox. Again, to access them, leave irc and
read them using your normal mail reader.
(16) Where can I find GIF archives of IRC people?
GIF archives of IRC people are available:
ftp.funet.fi:/pub/pics/people/misc/irc (NORDUnet only)
ftp.informatik.tu-muenchen.de /pub/comp/networking/irc/RP
(17) Where can I learn more?
The best, basic, IRC user's manual is the IRC Primer,
available in plain text, PostScript, and LaTeX from
cs-ftp.bu.edu:/irc/support ... Another good place to start might be
downloading the IRC tutorials. They're avaliable via anonymous ftp
from cs-ftp.bu.edu in /irc/support/tutorial.*
You can also join various IRC related mailing lists:
* "operlist" is a list that discusses current (and past) server code,
routing, and protocol. You can join by mailing
operlist-request@kei.com.
* "ircd-three" is a list that exists to discuss protocol revisions
for the 3.0 release of the ircd (irc server), currently in
planning. Mail ircd-three-request@kei.com to be added.
NOTE! These are not "Help me, where can I get started?" lists. For
that information, read the IRCprimer noted above.
Those looking for more technical information can get the IRC
RFC (rfc1459) available at all RFC ftp sites, as well as
cs-ftp.bu.edu:/irc/support/rfc1459.txt
(18) Where can I get an updated copy of this FAQ?
this FAQ is available from several sources:
cs-ftp.bu.edu:/irc/support/alt-irc-faq
ftp.kei.com:/pub/irc/alt-irc-faq
The latest copy will always be posted to these two ftp sites.
(18) What do I do if I'm still confused or have additions to this posting?
email hrose@kei.com or ask for help (in #Twilight_Zone) on IRC.
--
Helen Trillian Rose <hrose@kei.com, hrose@eff.org>
Kapor Enterprises, Inc. Check out my homepage! -->
Systems and Networks Administration http://www.kei.com/homepages/hrose.html
I like: DL, WN, Boeing I don't like: NW, HP, Airbus
_________________________________________________________________________
4) More & More Informations About IRC, MUDs
-------------------------------------------
Chapter Eleven: IRC, MUDs and other things that are more fun than t...
Chapter 11: IRC, MUDs AND OTHER THINGS THAT ARE MORE FUN THAN THEY SOUND
Many Net systems provide access to a series of interactive
services that let you hold live "chats" or play online games with
people around the world. To find out if your host system offers
these, you can ask your system administrator or just try them -- if
nothing happens, then your system does not provide them. In general,
if you can use telnet and ftp, chances are good you can use these
services as well.
11.1 TALK
This is the Net equivalent of a telephone conversation and
requires that both you and the person you want to talk to have access
to this function and are online at the same time. To use it, type
talk user@site.name
where user@site.name is the e-mail address of the other person. She will
see something like this on her screen:
talk: connection requested by yourname@site.name
talk: respond with: talk yourname@site.name
To start the conversation, she should then type (at her host system's
command line):
talk yourname@site.name
where that is your e-mail address. Both of you will then get a top
and bottom window on your screen. She will see everything you type in
one window; you'll see everything she types in the other. To
disconnect, hit control-C.
One note: Public-access sites that use Sun computers sometimes have
trouble with the talk program. If talk does not work, try typing
otalk
or
ntalk
instead. However, the party at the other end will have to have the same
program online for the connection to work.
11.2 INTERNET RELAY CHAT
IRC is a program that lets you hold live keyboard conversations
with people around the world. It's a lot like an international CB
radio - it even uses "channels." Type something on your computer and
it's instantly echoed around the world to whoever happens to be on the
same channel with you. You can join in existing public group chats or
set up your own. You can even create a private channel for yourself
and as few as one or two other people. And just like on a CB radio,
you can give yourself a unique "handle" or nickname.
IRC currently links host systems in 20 different countries, from
Australia to Hong Kong to Israel. Unfortunately, it's like telnet --
either your site has it or it doesn't. If your host system does have it,
Just type
irc
and hit enter. You'll get something like this:
*** Connecting to port 6667 of server world.std.com
*** Welcome to the Internet Relay Network, adamg
*** Your host is world.std.com, running version 2.7.1e+4
*** You have new mail.
*** If you have not already done so, please read the new user information with
+/HELP NEWUSER
*** This server was created Sat Apr 18 1992 at 16:27:02 EDT
*** There are 364 users on 140 servers
*** 45 users have connection to the twilight zone
*** There are 124 channels.
*** I have 1 clients and 3 servers
MOTD - world.std.com Message of the Day -
MOTD - Be careful out there...
MOTD -
MOTD - ->Spike
* End of /MOTD command.
23:13 [1] adamg [Mail: 32] * type /help for help
----------------------------------------------------------------------
_________________________________________________________________________
You are now in channel 0, the "null" channel, in which you can look
up various help files, but not much else. As you can see, IRC takes over
your entire screen. The top of the screen is where messages will
appear. The last line is where you type IRC commands and messages. All
IRC commands begin with a /. The slash tells the computer you are about
to enter a command, rather than a message. To see what channels are
available, type
/list
and hit enter. You'll get something like this:
*** Channel Users Topic
*** #Money 1 School CA$H (/msg SOS_AID help)
*** #Gone 1 ----->> Gone with the wind!!! ------>>>>>
*** #mee 1
*** #eclipse 1
*** #hiya 2
*** #saigon 4
*** #screwed 3
*** #z 2
*** #comix 1 LET'S TALK 'BOUT COMIX!!!!!
*** #Drama 1
*** #RayTrace 1 Rendering to Reality and Back
*** #NeXT 1
*** #wicca 4 Mr. Potato Head, R. I. P.
*** #dde^mhe` 1 no'ng chay? mo*? ...ba` con o*iiii
*** #jgm 1
*** #ucd 1
*** #Maine 2
*** #Snuffland 1
*** #p/g! 4
*** #DragonSrv 1
Because IRC allows for a large number of channels, the list might
scroll off your screen, so you might want to turn on your computer's
screen capture to capture the entire list. Note that the channels
always have names, instead of numbers. Each line in the listing tells
you the channel name, the number of people currently in it, and whether
there's a specific topic for it. To switch to a particular channel,
type
/join #channel
where "#channel" is the channel name and hit enter. Some "public"
channels actually require an invitation from somebody already on it. To
request an invitation, type
/who #channel-name
where channel-name is the name of the channel, and hit enter. Then ask
someone with an @ next to their name if you can join in. Note that
whenever you enter a channel, you have to include the #. Choose one
with a number of users, so you can see IRC in action.
If it's a busy channel, as soon as you join it, the top of your
screen will quickly be filled with messages. Each will start with a
person's IRC nickname, followed by his message.
It may seem awfully confusing at first. There could be two or
three conversations going on at the same time and sometimes the
_________________________________________________________________________
28% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
three conversations going on at the same time and sometimes the
messages will come in so fast you'll wonder how you can read them all.
Eventually, though, you'll get into the rhythm of the channel and
things will begin to make more sense. You might even want to add your
two cents (in fact, don't be surprised if a message to you shows up on
your screen right away; on some channels, newcomers are welcomed
immediately). To enter a public message, simply type it on that bottom
line (the computer knows it's a message because you haven't started the
line with a slash) and hit enter.
Public messages have a user's nickname in brackets, like this:
<tomg>
If you receive a private message from somebody, his name will be
between asterisks, like this:
*tomg*
_________________________________________________________________________
30% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
*tomg*
11.3 IRC COMMANDS
Note: Hit enter after each command.
/away When you're called away to put out a grease fire
in the kitchen, issue this command to let others know
you're still connected but just away from your terminal
or computer for awhile.
/help Brings up a list of commands for which there is a help
file. You will get a "topic:" prompt. Type in the
_________________________________________________________________________
33% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
file. You will get a "topic:" prompt. Type in the
subject for which you want information and hit enter.
Hit enter by itself to exit help.
/invite Asks another IRC to join you in a conversation.
/invite fleepo #hottub
would send a message to fleepo asking him to join you on
the #hottub channel. The channel name is optional.
/join Use this to switch to or create a particular channel,
like this:
/join #hottub
_________________________________________________________________________
36% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
/join #hottub
If one of these channels exists and is not a private
one, you will enter it. Otherwise, you have just
created it. Note you have to use a # as the first
character.
/list This will give you a list of all available public
channels, their topics (if any) and the number of users
currently on them. Hidden and private channels are not
shown.
/m name Send a private message to that user.
/mode This lets you determine who can join a channel you've
created.
_________________________________________________________________________
39% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
created.
/mode #channel +s
creates a secret channel.
/mode #channel +p
makes the channel private
/nick This lets you change the name by which others see you.
/nick fleepo
would change your name for the present session to
fleepo. People can still use /whois to find your e-mail
_________________________________________________________________________
41% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
fleepo. People can still use /whois to find your e-mail
address. If you try to enter a channel where somebody
else is already using that nickname, IRC will ask you to
select another name.
/query This sets up a private conversation between you and
another IRC user. To do this, type
/query nickname
Every message you type after that will go only to that
person. If she then types
/query nickname
where nickname is yours, then you have established a
private conversation. To exit this mode, type
_________________________________________________________________________
44% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
private conversation. To exit this mode, type
/query
by itself. While in query mode, you and the other
person can continue to "listen" to the discussion on
whatever public channels you were on, although neither
of you will be able to respond to any of the messages
there.
/quit Exit IRC.
/signoff Exit IRC.
/summon Asks somebody connected to a host system with IRC to
join you on IRC. You must use the person's entire e-mail
address.
_________________________________________________________________________
47% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
address.
/summon fleepo@foo.bar.com
would send a message to fleepo asking him to start IRC.
Usually not a good idea to just summon people unless you
know they're already amenable to the idea; otherwise you
may wind up annoying them no end. This command does not
work on all sites.
/topic When you've started a new channel, use this command to let
others know what it's about.
/topic #Amiga
would tell people who use /list that your channel is meant
for discussing Amiga computers.
_________________________________________________________________________
50% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
for discussing Amiga computers.
/who <chan> Shows you the e-mail address of people on a particular
channel.
/who #foo
would show you the addresses of everybody on channel foo.
/who
by itself shows you every e-mail address for every person
on IRC at the time, although be careful: on a busy night
you might get a list of 500 names!
/whois Use this to get some information about a specific IRC
user or to see who is online.
_________________________________________________________________________
52% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
user or to see who is online.
/whois nickname
will give you the e-mail address for the person using
that nickname.
/whois *
will list everybody on every channel.
/whowas Similar to /whois; gives information for people who
recently signed off IRC.
11.4 IRC IN TIMES OF CRISIS
_________________________________________________________________________
55% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
IRC has become a new medium for staying on top of really big
breaking news. In 1993, when Russian lawmakers barricaded themselves
inside the parliament building, some enterprising Muscovites and a couple
of Americans set up a "news channel" on IRC to relay first-person
accounts direct from Moscow. The channel was set up to provide a
continuous loop of information, much like all-news radio stations that
cycle through the day's news every 20 minutes. In 1994, Los Angeles
residents set up a similar channel to relay information related to the
Northridge earthquake. In both cases, logs of the channels were archived
somewhere on the Net, for those unable to "tune in" live.
How would you find such channels in the future? Use the /list
command to scroll through the available channels. If one has been set up
to discuss a particular breaking event, chances are you'll see a brief
description next to the channel name that will tell you that's the place
to tune.
_________________________________________________________________________
58% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
to tune.
11.5 MUDs
Multiple-User Dimensions or Dungeons (MUDs) take IRC into the
realm of fantasy. MUDs are live, role-playing games in which you
enter assume a new identity and enter an alternate reality through
your keyboard. As you explore this other world, through a series of
simple commands (such as "look," "go" and "take"), you'll run across
other users, who may engage you in a friendly discussion, enlist your
aid in some quest or try to kill you for no apparent reason.
Each MUD has its own personality and creator (or God) who was
willing to put in the long hours required to establish the particular
MUD's rules, laws of nature and information databases. Some MUDs
stress the social aspects of online communications -- users frequently
_________________________________________________________________________
61% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
stress the social aspects of online communications -- users frequently
gather online to chat and join together to build new structures or
even entire realms. Others are closer to "Dungeons and Dragons" and
are filled with sorcerers, dragons and evil people out to keep you
from completing your quest -- through murder if necessary.
Many MUDs (there are also related games known as MUCKs and MUSEs)
require you to apply in advance, through e-mail, for a character name
and password. One that lets you look around first, though, is
HoloMuck at McGill University in Montreal. The premise of this game
is that you arrive in the middle of Tanstaafl, a city on the planet
Holo. You have to find a place to live (else you get thrown into the
homeless shelter) and then you can begin exploring. Magic is allowed
on this world, but only outside the city limits. Get bored with the
city and you can roam the rest of the world or even take a trip into
orbit (of course, all this takes money; you can either wait for your
weekly salary or take a trip to the city casino). Once you become
familiar with the city and get your own character, you can even begin
_________________________________________________________________________
64% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
familiar with the city and get your own character, you can even begin
erecting your own building (or subway line, or almost anything else).
To connect, telnet to
collatz.mcrcim.mcgill.edu 5757
When you connect, type
connect guest guest
and hit enter. This connects you to the "guest" account, which
has a password of "guest."
You'll see this:
The Homeless Shelter(#22Rna)
You wake up in the town's Homeless Shelter, where vagrants are put for
protective holding. Please don't sleep in public places-- there are plenty of
_________________________________________________________________________
66% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
protective holding. Please don't sleep in public places-- there are plenty of
open apartments available. Type 'apartments' to see how to get to an
apartment building with open vacancies.
There is a small sign on the wall here, with helpful information. Type 'look
sign' to read it.
The door is standing open for your return to respectable society. Simply walk
'out' to the center.
Of course, you want to join respectable society, but first you
want to see what that sign says. So you type
look sign
and hit enter, which brings up a list of some basic commands. Then
you type
out
_________________________________________________________________________
69% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
followed by enter, which brings up this:
You slip out the door, and head southeast...
Tanstaafl Center
This is the center of the beautiful town of Tanstaafl. High Street runs north
and south into residential areas, while Main Street runs east and west into
business districts.
SW: is Tanstaafl Towers. Please claim an apartment... no sleeping in public!
SE: the Public Library offers both information and entertainment.
NW: is the Homeless Shelter, formerly the Town Jail.
NE: is Town Hall, site of several important services, including: Public
Message Board, Bureau of Land Management (with maps and regulations), and
other governmental/ bureaucratic help.
Down: Below a sign marked with both red and blue large letter 'U's, a
staircase leads into an underground subway passage.
(Feel free to 'look' in any direction for more information.)
_________________________________________________________________________
72% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
(Feel free to 'look' in any direction for more information.)
[Obvious exits: launch, d, nw, se, w, e, n, s, ne, sw]
Contents:
Instructions for newcomers
Directional signpost
Founders' statue
To see "Instructions for newcomers", type
look Instructions for newcomers
and hit enter. You could do the same for "Directional signpost" and
"Founders' statue." Then type
SW
and enter to get to Tanstaafl Towers, the city housing complex, where
_________________________________________________________________________
75% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
and enter to get to Tanstaafl Towers, the city housing complex, where
you have to claim an apartment (you may have to look around; many will
already) be occupied. And now it's off to explore Holo! One command
you'll want to keep in mind is "take." Periodically, you'll come
across items that, when you take them will confer certain abilities or
powers on you. If you type
help
and enter, you'll get a list of files you can read to learn more about
the MUD's commands.
The "say" command lets you talk to other players publicly. For
example,
say Hey, I'm here!
would be broadcast to everybody else in the room with you. If you
_________________________________________________________________________
77% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
would be broadcast to everybody else in the room with you. If you
want to talk to just one particular person, use "whisper" instead of
"say."
whisper agora=Hey, I'm here!
would be heard only by agora. Another way to communicate with
somebody regardless of where on the world they are is through your
pager. If you suddenly see yours go off while visiting, chances are
it's a wizard checking to see if you need any help. To read his
message, type
page
To send him a message, type
page name=message
_________________________________________________________________________
80% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
page name=message
where name is the wizard's name (it'll be in the original message).
Other MUDs and MUCKs may have different commands, but generally
use the same basic idea of letting you navigate through relatively
simple English commands.
When you connect to a MUD, choose your password as carefully as
you would one for your host system; alas, there are MUD crackers who
enjoy trying to break into other people's MUD accounts. And never,
never use the same password as the one you use on your host system!
MUDs can prove highly addicting. "The jury is still out on
whether MUDding is 'just a game' or 'an extension of real life with
gamelike qualities'," says Jennifer Smith, an active MUD player who
wrote an FAQ on the subject.
She adds one caution: "You shouldn't do anything that you
wouldn't do in real life, even if the world is a fantasy world. The
important thing to remember is that it's the fantasy world of possibly
_________________________________________________________________________
83% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
important thing to remember is that it's the fantasy world of possibly
hundreds of people, and not just yours in particular. There's a
human being on the other side of each and every wire! Always remember
that you may meet these other people some day, and they may break
your nose. People who treat others badly gradually build up bad
reputations and eventually receive the NO FUN Stamp of Disapproval."
11.6 GO, GO, GO (AND CHESS, TOO)!
Fancy a good game of go or chess? You no longer have to head for
the nearest park with a board in hand. The Internet has a couple of
machines that let you engage people from around the world in your
favorite board games. Or, if you prefer, you can watch matches in
progress.
To play go,
_________________________________________________________________________
86% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
To play go,
telnet hellspark.wharton.upenn.edu 6969
log on as: guest
You'll find prompts to various online help files to get you started.
For a chess match,
telnet news.panix.com 5000
log on as: guest
You'll find prompts for online help files on the system, which lets you
choose your skill level.
11.7 THE OTHER SIDE OF THE COIN
_________________________________________________________________________
88% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
All is not fun and games on the Net. Like any community, the Net
has its share of obnoxious characters who seem to exist only to make
your life miserable (you've already met some of them in chapter 4).
There are people who seem to spend a bit more time on the Net than many
would find healthy. It also has its criminals. Clifford Stoll writes in
"The Cuckoo's Egg" how he tracked a team of German hackers who were
breaking into U.S. computers and selling the information they found to
the Soviets. Robert Morris, a Cornell University student, was convicted
of unleashing a "worm" program that effectively disabled several thousand
computers connected to the Internet.
Of more immediate concern to the average Net user are crackers
who seek to find other's passwords to break into Net systems and people
who infect programs on ftp sites with viruses.
There is a widely available program known as "Crack" that can
decipher user passwords composed of words that might be found in a
_________________________________________________________________________
91% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
decipher user passwords composed of words that might be found in a
dictionary (this is why you shouldn't use such passwords). Short of
that, there are the annoying types who take a special thrill in trying to
make you miserable. The best advice in dealing with them is to count to
10 and then ignore them -- like juveniles everywhere, most of their fun
comes in seeing how upset you can get.
Meanwhile, two Cornell University students pleaded guilty in 1992 to
uploading virus-infected Macintosh programs to ftp sites. If you plan
to try out large amounts of software from ftp sites, it might be wise to
download or buy a good anti-viral program.
But can law enforcement go too far in seeking out the criminals?
The Electronic Frontier Foundation was founded in large part in
response to a series of government raids against an alleged gang of
hackers. The raids resulted in the near bankruptcy of one game
company never alleged to have had anything to do with the hackers,
when the government seized its computers and refused to give them
back. The case against another alleged participant collapsed in court
_________________________________________________________________________
94% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
back. The case against another alleged participant collapsed in court
when his attorney showed the "proprietary" and supposedly hacked
information he printed in an electronic newsletter was actually
available via an 800 number for about $13 -- from the phone company
from which that data was taken.
11.8 FYI
You can find discussions about IRC in the alt.irc newsgroup.
"A Discussion on Computer Network Conferencing," by Darren Reed
(May, 1992), provides a theoretical background on why conferencing
systems such as IRC are a Good Thing. It's available through ftp at
nic.ddn.mil in the rfc directory as rfc1324.txt.
Every Friday, Scott Goehring posts a new list of MUDs and related
games and their telnet addresses in the newsgroup rec.games.mud.announce.
There are several other mud newsgroups related to specific types of MUDs,
_________________________________________________________________________
97% seen P=prev-page N=next-page T=top B=bottom H=help X=exit
>
There are several other mud newsgroups related to specific types of MUDs,
including rec.games.mud.social, rec.games.mud.adventure,
rec.games.mud.tiny, rec.games.mud.diku and rec.games.mud.lp.
For a good overview of the impact on the Internet of the Morris
Worm, read "Virus Highlights Need for Improved Internet Management," by
the U.S. General Accounting Office (June, 1989). You can get a copy via
ftp from cert.sei.cmu.edu in the pub/virus-l/docs directory. It's
listed as gao_rpt.
Clifford Stoll describes how the Internet works and how he tracked
a group of KGB-paid German hackers through it, in "The Cuckoo's Egg:
Tracking a Spy through the Maze of Computer Espionage," Doubleday
(1989).
_________________________________________________________________________
Reference in New Issue View Git Blame Copy Permalink