81 lines
3.3 KiB
Plaintext
81 lines
3.3 KiB
Plaintext
|
|
|
|
Uploaded By: Dark Creaper
|
|
Brought to you by:
|
|
|
|
ShAdOwRuNnEr
|
|
|
|
|
|
-------------------------------------
|
|
|
|
Intro to Automatic Voice Network
|
|
Commonly know as AUTOVON
|
|
Part II 'Silver Boxes'
|
|
|
|
-------------------------------------
|
|
|
|
Warning: This modification could permanently damage you phone!! Read
|
|
information carefully!!!
|
|
|
|
Step One: Unscrew the two large screws on the base of your phone. Take
|
|
cover off and place it and the screws in a safe place.
|
|
Loosen (but don't remove) the screws on the sides of the touch tone keypad
|
|
(These are on the sides, and attach it to its mounting brackets). Now,
|
|
CAREFULLY remove the pad from its brackets (be sure not to trip any wires!!)
|
|
You will notice a plastic cover on the pad. Separate the two halves and put
|
|
them out of your way... Be sure not to destroy them!!!!
|
|
Now, turn over the pad. You should see a mass of wires, gold plated
|
|
contacts( yea, it's real gold!), discrete components, and two fairly large
|
|
black, hmmm, things!
|
|
These are the coils that generate the frequencies. Only one is used for
|
|
standard, so all the coils are capable of generating all 4 primary tones
|
|
(only connections to 3 of the 4 are given, though...). Your about to make
|
|
your connection to the fourth, and make the third column of keys "bank
|
|
switched" between normal and fourth row.
|
|
Now, cut three lengths of wire of different colors about 2 feet long. Look
|
|
at the coil on the left (with the 5 solder contacts facing you) and solder a
|
|
wire to the to the 4th post from the left. This is the 1633 Hz output.
|
|
Solder
|
|
the other end of this wire to the left pole of the smallest SPDT switch you
|
|
can find. This is the point of no return now!!!!..Take a look at the bottom
|
|
edge of the keypad. You should see a row of 3 gold plated contacts. Look at
|
|
the one on the left. This controls the rightmost bank of keys.
|
|
GENTLY separate the two touching connectors (they are soldered together
|
|
with
|
|
a drop of solder with) and spread them apart. Solder a colored wire to the
|
|
top contact, and solder it to the RIGHT pole of the SPDT.
|
|
Now, take another colored wire (different color) and solder it to the
|
|
bottom
|
|
(closest) contact. Solder the other end of this to the CENTER pole of the
|
|
SPDT.
|
|
|
|
You have now completed the mods on your phone!!! Congrats!!!
|
|
When the switch is in one position you'll get normal tones, in the other
|
|
you'll get 1633 tones.
|
|
Operating procedures will be described in the next phile... Stay tuned!!!
|
|
|
|
|
|
____ __ __ __ ______
|
|
/ __ \ / / / / / / / ____/
|
|
/ / / / / / / / / / / /
|
|
/ /_/ / / / / / / / / /__
|
|
/ ____/ / / / / / / / ___/
|
|
/ / / /_/ /_/ / / /____
|
|
/_/hree \___/\___/orld /______/lite
|
|
|
|
(916) xxx-xxxx
|
|
24 Hours/7 Days
|
|
SysOp: Dark Creaper
|
|
Co-Sysop: ShAdOwRuNnEr
|
|
|
|
Downloaded from..
|
|
|
|
The Lost City of Atlantis
|
|
. _ . __ |\ _ .
|
|
. .__ =| |[] |# |# ._ .
|
|
...##.=|.|[].|#:|#.|=|...
|
|
- -- --- ------------ --- - -
|
|
703 - xxx - xxxx
|
|
|
|
|