56 lines
2.6 KiB
Plaintext
56 lines
2.6 KiB
Plaintext
|
|
+----------------HARDWARE HACK-----------------+
|
|
Machine : Lynx I
|
|
Addition : 24MHz Quartz
|
|
Hacked By : HardwareSchreck
|
|
Translated By : MegaJerk
|
|
+----------------------------------------------+
|
|
|
|
Last month we told you about the 24MHz Lynx. I didn't have enough time to
|
|
translate the manual for it. As it was written in German, and neither
|
|
English or German being my native language, it took some time. But here it
|
|
is.
|
|
|
|
(KEEP IN MIND THAT THIS IS DESCRIPTION IS FOR THE LYNX I ONLY ! WE HAVEN'T
|
|
TESTED IT ON THE LYNX II YET (HAVEN'T OPENED IT UP YET).
|
|
NEITHER PORTABLE ADDICTION OR THE INTERNATIONAL LYNX CLUB IS AT FAULT IF
|
|
WHEN YOU BRAKE SOMETHING WHILE DOING THIS)
|
|
|
|
1) Take cartridge and batteries out of your Lynx.
|
|
2) Take out the 4 skrews on the underside of your Lynx.
|
|
3) Lay down your Lynx with the screen down and remove the back of your
|
|
Lynx.
|
|
4) You will now see the cartridge holder. Underneath it you will see a
|
|
metal plate. It covers the RAM's, Mickey, Suzy and the quartz.
|
|
The metal plate is soldered. Use soldering iron to remove it. While
|
|
doing this you will automatically remove the metal protection on the
|
|
other side of your Lynx.
|
|
5) Turn your Lynx around and take off the top half (NOW, DON'T TOUCH THE
|
|
SCREEN !!!).
|
|
6) The 16MHz quartz is directly under the cartridge holder. Take it out.
|
|
7) Now take the 16MHz and 24MHz crystal and connect them in this way:
|
|
|
|
Connection with mass
|
|
. Quartz 1 ....:----------------> } Connect these with the
|
|
. |----| |.|...| Switch } points where you took
|
|
. | | | | } the 16MHz quartz off.
|
|
....|----| | | }
|
|
. | | | | }
|
|
. | :------------: | }
|
|
. :-------------------;---------------> }
|
|
. | :----------------
|
|
. | |
|
|
....|----|
|
|
| |
|
|
|----|
|
|
Quartz 2
|
|
|
|
8) You need to make a mass, else the quartz will be disturbed by the rest
|
|
of the Lynx electronics.
|
|
9) You can now fit the quartzes with double sided tape somewhere in your
|
|
Lynx. We suggest you stick them on the back of the battery compartment.
|
|
10) To use the switch, you have to punch a little hole in your Lynx.
|
|
Why to use a switch was explained by Stephen Landrum in Portable
|
|
Addiction # 09.
|
|
|