102 lines
4.4 KiB
Plaintext
102 lines
4.4 KiB
Plaintext
NOKDROPS.TXT - Can't get a girl? Then try...
|
|
NOCK OUT DROPS
|
|
Knock-Out Drops
|
|
*-*-*-*-*-*-*-*
|
|
|
|
Cloral Hydrate knock-out drops
|
|
|
|
|
|
Chemicals: Equipement:
|
|
Bleach Distilling set (see below)
|
|
Sani-flush Clorine bottle
|
|
Ethyl alcohol Glass tubing
|
|
Sulfuric acid Rubber tubing
|
|
Calcium oxide Aquarium aerator
|
|
Basting syringe
|
|
Cooking thermometer
|
|
600 ml Beaker
|
|
Water glass
|
|
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
------ -------
|
|
/ \./ \...
|
|
./ ||| \ Bucket of ice water
|
|
| | ||| .....\ ..... |
|
|
/---|.| / | \ | \ | .........../
|
|
/ / o \ | \ |
|
|
Bleach |.....| |........\...| To outside
|
|
& \ ................/
|
|
Sani-flush | \../
|
|
600 ml | |
|
|
w/ aerator |..| .... Collection
|
|
Glass
|
|
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
A piece of glass is fitted into the bottom of the stopper for the flask.
|
|
To that is placed an 8 in. lenght rubber tubing and at the end of this the
|
|
aerator. Two more pieces of glass are put in the top of the stopper.
|
|
|
|
First, you will need pure alcohol, so but some 100 proof vodka and distill
|
|
it until you have 12 oz.
|
|
|
|
Put the alcohol in the flask. Put 2 in. of bleach and a teaspoon of
|
|
Sani-flush in the chlorine bottle. This will generate the chlorine gas
|
|
that you will need. Start the chlorine through the alcohol while the flask
|
|
is still cold. Watch it carefully to see when the alcohol stops absorbing
|
|
the chlorine. Then light an alcohol lamp and place it under the 600 ml.
|
|
flask. Keep the flame low until the alcohol stops absorbing again. Raise
|
|
the flame and repeat. Continue this until the alcohol is boiling. Some of
|
|
the alcohol will distill off into the collection bottle. Several times
|
|
during the process, pour this back into the 600 ml. beaker.
|
|
|
|
When the alcohol is totally clorinated the flask is poured into a
|
|
porcelain dish and allowed to cool. If you have done this right the cooled
|
|
product should be unrefined Cloral Hydrate.
|
|
|
|
Now, pour strong sulfuric acid, 3 times the volume of the Cloral Hydrate,
|
|
into a pan. Place this pan on your stove over gentle heat. When the cloral
|
|
hydrate is melted, it and the sulfuric acid are stirred thoroughly ,
|
|
poured into the flask and heated again. But this time use the thermometer
|
|
and don't let the temperature get above 200 F.
|
|
|
|
As the mixture heats up, the still impure cloral hydrate will rise to the
|
|
surface. When it stops rising, use the basting syringe and draw the top
|
|
off of the sulfuric acid. Repeat this until the pan is empty.
|
|
|
|
Put the cloral hydrate you drew off in the last step, into the beaker and
|
|
heat to about 190 F. for 20 minutes. This will get rid of any alcohol or
|
|
acid still in it. Pour this back into the flask and add an equal amount of
|
|
sulfuric acid. Swirl this around to mix it.
|
|
|
|
Once again you must distill the mixture. But this time it is easy since
|
|
the cloral hydrate will boil at 210 F. and the sulfuric will boil at 722
|
|
F. When finished pour out the acid, then wash & dry the flask. Now, put
|
|
the powdered calcium oxide, equal in volume to the cloral hydrate , into
|
|
the flask and add the cloral hydrate and distill it again. Stop as soon
|
|
as the surface of the oxide is dry.
|
|
|
|
To use, add 1 part water to 2 part <by volume> of the finished product.
|
|
The dose is one gram. The best way to use it is to put it in a mixed
|
|
drink, because it has a bitter taste.
|
|
|
|
Distributed by -
|
|
|
|
I
|
|
d A
|
|
e n M
|
|
a a o
|
|
l r v
|
|
i c e
|
|
s h m
|
|
t y e
|
|
n
|
|
t
|
|
|
|
|