106 lines
4.9 KiB
Plaintext
106 lines
4.9 KiB
Plaintext
(55) Fri 5 Apr 91 13:04
|
|
By: Skate Basher
|
|
To: All
|
|
Re: Wicked water pipe
|
|
------------------------------------------------------------------------------
|
|
|
|
Ok peoples, here's a quick, and handy speech on creating a very effective
|
|
water-pipe out of a few household items.
|
|
|
|
Supplies needed:
|
|
|
|
Coke Can
|
|
3 Screw-on bottle-caps
|
|
Screen (grab it outta yer tap)
|
|
Pen Tube (use a clear one for trippiest results)
|
|
Metal tube about 5 inches long (the tube off a tire-gage is what I used)
|
|
Electrical tape, and rubber sealent (Silicone Seal) <-- optional
|
|
|
|
|
|
For those of you who don't know the concept behind the water-pipe.
|
|
It works like this.. You got your metal tube running from the bowl, at the top
|
|
of the can, to the bottom, where the can is about 1/4 filled with chilled
|
|
water, (or beer works even better!) and then ya got your pen tube for a
|
|
mouthpiece. When you spark a bowl, and suck on the mouth-piece, the smoke goes
|
|
from the bowl, through the metal tube, through the water, then up through the
|
|
pen-tube (which of course isn't submerged in the water.. It's about an inch &
|
|
1/2 above the water-line. The result.. cool tokes, no more burning throat, or
|
|
hash coughs :)
|
|
|
|
|
|
Step 1:
|
|
|
|
First we must construct the bowl. Take a knife, and neatly punch a small hole
|
|
through 1 of the bottle-caps. This is for the metal tube to fit through, so
|
|
make the diameter of the hole appropriate for it. Next, stick the metal tube
|
|
through the top side of the cap, so it protrudes out about a 1/2 centimeter
|
|
from the inside of the cap. It should have a snug fit.
|
|
Next, take the other two caps, and cut a hole in each of them, from the TOP
|
|
of the cap. This will be for the screen.
|
|
|
|
_______
|
|
[ ] <-- the actual bowl.
|
|
[_____] (cap is up-side-down)
|
|
Screen --> [ ] <-- secondary chamber
|
|
(fitting between caps) [_____] (cap is right-side up)
|
|
[ ] <-- intake chamber
|
|
[_____] (cap is up-side down)
|
|
Metal tube --> | |
|
|
(plastic would melt!) | |
|
|
|
|
Start with the intake, and secondary chambers. See the little bottle-cap
|
|
tabs on em? Well, take four of those off each cap, then interlock them
|
|
together. Put the screen on the hole of the secondary chamber, then put the
|
|
bowl on top of that, and tape it all together.
|
|
|
|
Step 2:
|
|
|
|
Now, on to the actual pipe part of it. By this time, you should have the bowl
|
|
done (which by the way is the hardest part) Take your can, and pull off it's
|
|
tab too, NEATLY! You want to have the sippin' hole nice and undamaged if you
|
|
wanna have a snuggly fitting bowl mechanism. Take your knife, and cut a small
|
|
hole in the top of the can, opposite the sippin hole, this is for the
|
|
mouthpiece. (pen)
|
|
|
|
Ok. so you should have your bowl thingy done, and it should be inside the
|
|
can, make sure the intake chamber is flush against the top of the can. Got your
|
|
mouthpiece hole drilled? Ok. Stick the pen in that hole, so it's angled out,
|
|
and away from the bowl (so you don't get your hair torched when you try to use
|
|
this thing) Now tape the whole thing up so it's airtight, and the last thing..
|
|
The carb. Punch a hole in the side of the can opposite the mouth- piece about
|
|
3/4 up the can. This is the carb. When you'r almost finished your toke, take
|
|
your finger off this hole, to get all the smoke that was left inside the can.
|
|
Gets ya totally baked. This hole is also useful for filling up the pipe :)
|
|
|
|
|
|
|
|
//
|
|
// <-- Mouth-piece
|
|
_____ //
|
|
Bowl --> [___] //
|
|
_[___]__//_
|
|
/ || // \
|
|
| || / |
|
|
Carb --> || |
|
|
| || |
|
|
|___||______|
|
|
| || |
|
|
/////Basher
|
|
|
|
|
|
|
|
|
|
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|
|
Another file downloaded from: The NIRVANAnet(tm) Seven
|
|
|
|
& the Temple of the Screaming Electron Taipan Enigma 510/935-5845
|
|
Burn This Flag Zardoz 408/363-9766
|
|
realitycheck Poindexter Fortran 510/527-1662
|
|
Lies Unlimited Mick Freen 801/278-2699
|
|
The New Dork Sublime Biffnix 415/864-DORK
|
|
The Shrine Rif Raf 206/794-6674
|
|
Planet Mirth Simon Jester 510/786-6560
|
|
|
|
"Raw Data for Raw Nerves"
|
|
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|