66 lines
2.9 KiB
Plaintext
66 lines
2.9 KiB
Plaintext
|
|
_______________________________________________________________________
|
|
STACKER NOTE Stac Electronics Technical Note
|
|
|
|
Subject: I Stacked my PS/1 before I reconfigured the way it starts.
|
|
Now what?
|
|
|
|
Tech027- 2/20/92
|
|
Page 1 of 1
|
|
______________________________________________________________________
|
|
|
|
Note: If Stacker has not yet been installed, see Tech020: INSTALLING
|
|
STACKER ON AN IBM PS/1.
|
|
|
|
BACKGROUND:
|
|
The PS/1 is a ROM based machine. It normally boots from its
|
|
"Built-In-DOS" on the ROM D: drive and reads config.sys and Autoexec.bat
|
|
from there as well. The PS/1 can be reconfigured, using"CUSTOMIZE",
|
|
to read Config.sys and Autoexec.bat from C: so that the Stacker devices
|
|
may be loaded. If the boot process is not "CUSTOMIZed" before loading
|
|
Stacker, the data may appear to be "missing" because the STACKER.COM device
|
|
has not been loaded.
|
|
|
|
A 4 Quadrant system menu is normally loaded from ROM upon boot. It consists
|
|
of 1.Information 2.Microsoft works 3. Your software and 4. IBM DOS. You can
|
|
shell to a DOS prompt by pressing <shift F9>. It is installed in Config.sys:
|
|
"INSTALL=D:\SHELLSTB.COM".
|
|
|
|
"CUSTOMIZE How System Starts" is a program normally in the C:\DOS directory,
|
|
but is copied into the Stacker drive upon "STACKING... the existing drive".
|
|
The program also should be on the DOS diskettes that came with the
|
|
machine. In the Customize program you can configure the computer to
|
|
Read the system files, Config.sys, and Autoexec.bat from C: or D:
|
|
Note: THE CUSTOMIZE DEFAULTS CAN BE RESTORED BY POWERING DOWN THE
|
|
SYSTEM, HOLDING DOWN THE 2 MOUSE BUTTONS, AND POWERING BACK UP.
|
|
|
|
RECOVERY:
|
|
Note: You MUST have the DOS program diskette containing CUSTOMIZ.EXE
|
|
or a bootable floppy to proceed. Nothing can be done until you have
|
|
one of these!
|
|
|
|
If you have the DOS program diskette:
|
|
1. Insert the DOS diskette in A: and Run the CUSTOMIZE program from the
|
|
Dos Quadrant. (You can also <shift> F9 to get to a prompt and run
|
|
A:Customiz.)
|
|
|
|
If you do not have the DOS diskette but have a bootable system
|
|
diskette:
|
|
1. Insert the system diskette in A: and from the system menu press
|
|
Alt+SysRq to force the system to boot from A: (the D: Rom drive
|
|
will not be accessible after this.)
|
|
2. Copy config.sys to A: and reboot
|
|
3. From the DOS directory on the Stacker drive (C:) run CUSTOMIZ.
|
|
|
|
Running CUSTOMIZE:
|
|
1. The third line from the bottom of the screen says "Read
|
|
Config.sys:". Click on "from Disk"
|
|
2. The next line down says " Read Autoexec.bat". Click on "From Disk"
|
|
3. The last line says "Disk to Read from". Click on C:
|
|
4. Press <ENTER> to save changes and exit.
|
|
5. Reboot the machine.
|
|
6. This will bring you to a C: prompt. Edit the Config.sys on C:\ and
|
|
add the line:
|
|
Install=D:\SHELLSTB.COM to restore the system Quadrant menu.
|
|
7. Restart the system for changes to take affect.
|