informis
/
textfiles
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
textfiles/computers/opcodes.lst

1380 lines
32 KiB
Plaintext
Raw Permalink Blame History

[File provided by Alex V. Potemkin <avk@netserv2.free.net>]
Last Change 10/23/94
------------------------------------------------------------
This is DOC about undocumented instructions and documented
instructions of any last processors
------------------------------------------------------------
(C) (P) Potemkin's Hackers Group 1994
------------------------------------------------------------
Revision 1. 1 September 1994
------------------------------------------------------------
--------------------------------------------------
BSWAP - Bytes Swap
---------------------------------------------------
CPU: I486 +
Type of Instruction: Operation
Instruction: BSWAP dwordr
Description:
XCHG BYTE dwordr[31:24], dwordr[7:0]
XCHG BYTE dwordr[23:16], dwordr[15:8]
; Need Good Picture to Show It
Notes: This instruction used for converting big-endian
(Intel) format to little-endian (Motorolla etc.) format.
Flags Affected: None
CPU mode: RM, PM, VM, SMM
Physical Form: BSWAP r32
COP (Code of Operation): 0FH 11001rrr
Clocks: Cyrix Cx486SLC : 4
i486 : 1
Pentium : 1
---------------------------------------------------
CMPXCHG8B - Compare and exchange 8 bytes
---------------------------------------------------
CPU: Pentium (tm)
Type of Instruction: Operation
Instruction: CMPXCHG8B dest
Note: dest is memory operand: QWORD PTR [memory]
Description:
IF (QWORD (EDX:EAX) = dest) THEN
{
ZF <- 1;
dest <- QWORD (ECX:EBX);
}
ELSE
{
ZF <- 0;
EDX:EAX <- dest
}
END
Flags Affected: ZF
CPU mode: RM, PM, VM, SMM
Physical Form: CMPXCHG8B mem64
COP (Code of Operation) : 0FH C7H Postbyte
Clocks: Pentium : 10
Note: Postbyte MMRRRMMM: MM<>11 if (==) then INT 6
---------------------------------------------------
CMPXCHG - Compare and exchange
---------------------------------------------------
CPU: i486+
Type of Instruction: Operation
Instruction: CMPXCHG dest, src
Description:
Acc = if OperationSize (8) -> AL
OperationSize (16) -> AX
OperationSize (32) -> EAX
IF (Acc = dest) THEN
{
ZF <- 1;
dest <- sorc;
}
ELSE
{
ZF <- 0;
Acc <- dest;
}
END
Note: This instruction used to support semaphores
Flags Affected: ZF (see description)
OF, SF, AF, PF, CF (like CMP instruction) (see description)
CPU mode: RM, PM, VM, SMM
+++++++++++++++++++++++
Physical Form: CMPXCHG r/m8, r8
COP (Code of Operation) : 0FH A6H Postbyte ; i486 (A-B0 step)
: 0FH B0H Postbyte ; i486 (B1+ step clones
; and upgrades)
Clocks:
Intel i486 : 6/7 if compare OK
: 6/10 if compare FAIL
Cyrix Cx486SLC : 5/7
Pentium (tm) : 6
Penalty if cache miss :
Intel i486 : 2
Cyrix Cx486SLC : 1
+++++++++++++++++++++
Physical Form: CMPXCHG r/m16, r16
CMPXCHG r/m32, r32
COP (Code of Operation) : 0FH A7H Postbyte ; i486 (A-B0 step)
: 0FH B1H Postbyte ; i486 (B1+ step clones
; and upgrades)
Clocks:
Intel i486 : 6/7 if compare OK
: 6/10 if compare FAIL
Cyrix Cx486SLC : 5/7
Pentium (tm) : 6
Penalty if cache miss :
Intel i486 : 2
Cyrix Cx486SLC : 1
---------------------------------------------------
CPUID - CPU Identification
---------------------------------------------------
CPU: Intel 486DX/SX/DX2 SL Enhanced and all later
Intel processors include (IntelDX4, IntelSX2,
Pentium etc.)
Note: i.e. 1993+ years processors produced by Intel
Note: To know if your CPU support CPUID instruction
try to set ID flag (bit 21 of EFLAGS) to 1, and
if it sets this mean that CPUID support.
Type of Instruction: Operation
Instruction: CPUID
Description:
IF (EAX=0) THEN
{
EAX <- Maximum value of EAX to CALL CPUID instruction
1 for all processors (date 1 September 1994)
may be >1 in future microprocessors
EBX <- 756E6547H i.e. 'Genu'
EDX <- 49656E69H i.e. 'ineI'
ECX <- 6C65746EH i.e. 'ntel'
;; EBX, EDX and ECX contain a OEM name string
;; for Intel this string is 'GenuineIntel'
}
ELSEIF (EAX=1) THEN
{
EAX[3:0] <- Stepping ID
EAX[7:4] <- Model
EAX[11:8] <- Family
; 4 - i486 family
; 5 - Pentium family
EAX[15:12] <- Reserved
; set to 0 now
; but I'm sure that for Pentium OverDrive for P54C
;this field will be set to 1
EAX[31:16] <- Reserved and set to 0s now
EDX <- Compability flags
;; below all info if bit flag =1
EDX[0] <- FPU on Chip
EDX[1] <- Virtual Mode Extention present
EDX[2] ??
EDX[3] ??
EDX[4] ?? somethere here TSC support
EDX[5] ??
EDX[6] ??
EDX[7] <- Machine Check exception present
EDX[8] <- CMPXCHG8B instruction present
EDX[9] <- APIC on Chip
EDX[31:10] <- Reserved and set to 0s now
}
ELSEIF (EAX > 1) THEN
{
EAX, EBX, ECX, EDX <- Undefined
}
END.
Global Note:
This file contain open i.e nonconfiderential information about
CPUID information.
If you want MORE try to contact Intel, may be (but I'm sure that not)
Intelers give you "Yellow Pages" (i.e Supplement to Pentium (tm)
Processor User's Manual) to read inside office if you not a
designer of compiler or operation system.
Flags Affected: None
CPU mode: RM, PM, VM, SMM
Physical Form: CPUID
COP (Code of Operation): 0FH A2H
Clocks: 486s & Pentium (EAX=1) : 14
486s & Pentium (EAX=0 or EAX>1) : 9
---------------------------------------------------
F4X4 - FPU: Multiplicate vector on Matrix 4x4
---------------------------------------------------
FPU: IIT FPUs.
Type of Instruction: FPU instruction
Instruction: F4X4
Description:
; This Instruction Multiplicate vector on
; Matrix 4X4
_ _ _ _ _ _
| | | | | |
| Xn | | A00 A01 A02 A03 | | X0 |
| Yn | = | A10 A11 A12 A13 | X | Y0 |
| Zn | | A20 A21 A22 A23 | | Z0 |
| Wn | | A30 A31 A31 A33 | | W0 |
|_ _| |_ _| |_ _|
; Data fetches/stores from/to FPU registers:
# of F E T C H E S STORE
Register Bank0 Bank1 Bank2 Bank0
ST X0 A33 A31 Xn
ST (1) Y0 A23 A21 Yn
ST (2) Z0 A13 A11 Zn
ST (3) W0 A03 A01 Wn
ST (4) A32 A30
ST (5) A22 A20
ST (6) A12 A10
ST (7) A02 A00
Note: See FSBP0, FSBP1, FSBP2 for more information
FPU Flags Affected: S
FPU mode: Any
Physical Form: F4X4
COP (Code of Operation): DBH F1H
Clocks: IIT 2c87 : 242
IIT 3c87 : 242
IIT 3c87SX : 242
---------------------------------------------------
FNSTDW - FPU Not wait Store Device Word register
---------------------------------------------------
FPU: i387SL Mobile
Type of Instruction: FPU instruction
Instruction: FNSTDW dest
Description:
dest <- Device Word
Format of Device word:
bit (s) Description
0-7 Reserved
8 S - Status bit:
if S=1 then FP device is a static design and OS
or APM Bios may set CLK slow to 0 Mhz without
lost any data.
9-15 Reserved
Note: Device word register valid only after FNINIT
FPU Flags Affected: None
CPU mode: Any
Physical Form: FNSTDW AX
COP (Code of Operation): DFH E1H
Clocks: i387SL Mobile: 13
---------------------------------------------------
FNSTSG - FPU Not wait Store Signature Word register
---------------------------------------------------
FPU: i387SL Mobile
Type of Instruction: FPU instruction
Instruction: FNSTSG dest
Description:
dest <- Signature Word
Format of Signature word:
bit (s) Description
3-0 Revision
7-4 Steppin
11-8 Family
15-12 Version
Note:
For i387 (tm) SL Mobile Signature is:
Version = 2
Family = 3 ; 387
Stepping = 1 ; Ax step
Revision = 0 ; x0 step
i.e i387 (tm) SL is A0 step
Note: This FPU is out of life
Note: Signature word register valid only after FNINIT
FPU Flags Affected: None
CPU mode: Any
Physical Form: FNSTSG AX
COP (Code of Operation): DFH E2H
Clocks: i387SL Mobile: 13
---------------------------------------------------
FRICHOP - FPU: Round to Integer chop method
---------------------------------------------------
FPU: Cyrix FPUs and 486s with FPU on chip
Type of Instruction: FPU instruction
Instruction: FRICHOP
Description:
ST <- ROUND (ST, CHOP)
Note:
This instruction calculate rounding ST toward zero
i.e. ignoring part righter that decimal .
Examples:
1.2 -> 1.0
-1.2 -> -1.0
3.0 -> 3.0
0.0 -> 0.0
1.5 -> 1.0
-2.0 -> -2.0
FPU Flags Affected: S, P, D, I, C1
FPU mode: Any
Physical Form: FRICHOP
COP (Code of Operation): DDH FCH
Clocks: Cx83D87 : 15
Cx83S87 : 15
CxEMC87 : 15
Cx487DLC :
---------------------------------------------------
FRINEAR - FPU: Round to Integer Nearest method
---------------------------------------------------
FPU: Cyrix FPUs and 486s with FPU on chip
Type of Instruction: FPU instruction
Instruction: FRINEAR
Description:
ST <- ROUND (ST, NEAREST)
Note:
This instruction calculate rounding ST toward nearest
Examples:
1.2 -> 1.0
-1.2 -> -1.0
3.0 -> 3.0
0.0 -> 0.0
1.5 -> 1.0
1.8 -> 2.0
-2.0 -> -2.0
FPU Flags Affected: S, P, D, I, C1
FPU mode: Any
Physical Form: FRINEAR
COP (Code of Operation): DFH FCH
Clocks: Cx83D87 : 15
Cx83S87 : 15
CxEMC87 : 15
Cx487DLC :
---------------------------------------------------
FRINT2 - FPU: Round to Integer
---------------------------------------------------
FPU: Cyrix FPUs and 486s with FPU on chip
Type of Instruction: FPU instruction
Instruction: FRINT2
Description:
IF (exact half) THEN
{
ST <- SIGN (ST) * ROUND (ABS (ST)+0.5, NEAREST)
}
ELSE
{
ST <- ROUND (ST, NEAREST)
}
END
Note:
This instruction calculate rounding ST toward nearest,
but if number is exact half then this instruction round
it toward signed infinity. Sign of this infinity is same
with sign of number.
Examples:
1.2 -> 1.0
-1.2 -> -1.0
3.0 -> 3.0
0.0 -> 0.0
1.5 -> 2.0
1.8 -> 2.0
-2.0 -> -2.0
-1.5 -> -2.0
FPU Flags Affected: S, P, D, I, C1
FPU mode: Any
Physical Form: FRINT2
COP (Code of Operation): DBH FCH
Clocks: Cx83D87 : 15
Cx83S87 : 15
CxEMC87 : 15
Cx487DLC :
---------------------------------------------------
FRSTPM - FPU Reset Protected Mode
---------------------------------------------------
FPU: i287XL i287XLT
Type of Instruction: FPU instruction
Instruction: FRSTPM
Description:
Reset Cooprocessor from Protected Mode
to Real Address mode.
FPU Flags Affected: None
CPU mode:Any ???
Physical Form: FRSTPM
COP (Code of Operation): DBH E5H
Clocks: i287XL : 12
i287XLT : 12
---------------------------------------------------
FSBP0 - FPU: Set Bank pointer to Bank # 0
---------------------------------------------------
FPU: IIT FPUs.
Type of Instruction: FPU instruction
Instruction: FSBP0
Description:
; This Instruction set current bank pointer to
; Bank # 0.
; Each bank contain eight 80bit registers
; There are 3 banks (0, 1, 2) in Chip
; After initialization FPU select bank # 0.
FPU Flags Affected: None
FPU mode: Any
Physical Form: FSBP0
COP (Code of Operation): DBH E8H
Clocks: IIT 2c87 : 6
IIT 3c87 : 6
IIT 3c87SX : 6
---------------------------------------------------
FSBP1 - FPU: Set Bank pointer to Bank # 1
---------------------------------------------------
FPU: IIT FPUs.
Type of Instruction: FPU instruction
Instruction: FSBP1
Description:
; This Instruction set current bank pointer to
; Bank # 1.
; Each bank contain eight 80bit registers
; There are 3 banks (0, 1, 2) in Chip
; After initialization FPU select bank # 0.
FPU Flags Affected: None
FPU mode: Any
Physical Form: FSBP1
COP (Code of Operation): DBH EBH
Clocks: IIT 2c87 : 6
IIT 3c87 : 6
IIT 3c87SX : 6
---------------------------------------------------
FSBP2 - FPU: Set Bank pointer to Bank # 2
---------------------------------------------------
FPU: IIT FPUs.
Type of Instruction: FPU instruction
Instruction: FSBP2
Description:
; This Instruction set current bank pointer to
; Bank # 2.
; Each bank contain eight 80bit registers
; There are 3 banks (0, 1, 2) in Chip
; After initialization FPU select bank # 0.
FPU Flags Affected: None
FPU mode: Any
Physical Form: FSBP2
COP (Code of Operation): DBH EAH
Clocks: IIT 2c87 : 6
IIT 3c87 : 6
IIT 3c87SX : 6
---------------------------------------------------
INVD - Invalidate Cache Buffer
---------------------------------------------------
CPU: I486 +
Type of Instruction: System
Instruction: INVD
Description:
FLUSH INTERNAL CACHE
(It means that all lines of internal caches sets as
invalid)
SIGNAL EXTERNAL CACHE TO FLUSH
Notes: This instruction not work in Real Mode and in
Protected mode work only in ring 0 ;
Flags Affected: None
CPU mode: PM0, SMM?
Physical Form: INVD
COP (Code of Operation): 0FH 08H
Clocks: Cyrix Cx486SLC : 4
i486 : 4
Pentium : 15
---------------------------------------------------
INVLPG - Invalidate Page Entry In TLB
---------------------------------------------------
CPU: I486 +
Type of Instruction: System
Instruction: INVLPG mem
Description:
IF found in data or code (if both) (or common if single)
TLB entry with linear address (page part) same as
memory operand <mem> then mark this entry as Invalid;
Notes: This instruction not work in Real Mode and in
Protected mode work only in ring 0 ;
Flags Affected: None
CPU mode: RM, PM, VM, SMM
Physical Form: INVLPG mem
COP (Code of Operation): 0FH 01H mm111mmm
Clocks: Cyrix Cx486SLC : 4
i486 : 12 if hit
: 11 if not hit
Pentium : 25
---------------------------------------------------
LOADALL - Load All Registers
---------------------------------------------------
CPU: Intel 386+ +all clones
Type of Instruction: System Operation
(Work only then CPL=0)
Instruction: LOADALL
Description:
Load All Registers (Include Shadow Registers) from Table
Which Begin on place pointed ES:EDI
Format of LOADALL Table:
Offset Len Description
0H 4 CR0
4H 4 EFLAGS
8H 4 EIP
CH 4 EDI
10H 4 ESI
14H 4 EBP
18H 4 ESP
1CH 4 EBX
20H 4 EDX
24H 4 ESX
28H 4 EAX
2CH 4 DR6
30H 4 DR7
34H 4 TR (16 bit, zero filled up)
38H 4 LDT ---------
3CH 4 GS ---------
40H 4 FS ---------
44H 4 DS ---------
48H 4 SS ---------
4CH 4 CS ---------
50H 4 ES ---------
54H 4 TSS.attrib
58H 4 TSS.base
5CH 4 TSS.limit
60H 4 0s
64H 4 IDT.base
68H 4 IDT.limit
6CH 4 0s
70H 4 GDT.base
74H 4 GDT.limit
78H 4 LDT.attrib
7CH 4 LDT.base
80H 4 LDT.limit
84H 4 GS.attrib
88H 4 GS.base
8CH 4 GS.limit
90H 4 FS.attrib
94H 4 FS.base
98H 4 FS.limit
9CH 4 DS.attrib
A0H 4 DS.base
A4H 4 DS.limit
A8H 4 SS.attrib
ACH 4 SS.base
B0H 4 SS.limit
B4H 4 CS.attrib
B8H 4 CS.base
BCH 4 CS.limit
C0H 4 ES.attrib
C4H 4 ES.base
C8H 4 ES.limit
Format of Attrib field:
Byte Description
0 0s
1 AR (Access Right) byte in the Descriptor format
Note:
P bit is a valid bit
if valid bit=0 then Shadow Register is invalid and
INT 0DH - General Protection Fault call
DPL of SS, CS det. CPL
2-3 0s
Flags Affected: All (FLAGS Register Reload)
CPU mode: RM, PM0
Physical Form: LOADALL
COP (Code of Operation): 0FH 07H
Clocks: i386XX : n/a
i486XX : n/a
Note: This operation used 102 data transfer cycles on 32bit bus
Typical clocks:
i386SX: ~350
i386DX: ~290
i486XX: ~220
---------------------------------------------------
LOADALL - Load All Registers From Table
---------------------------------------------------
CPU: Intel 80286 and all its clones
Type of Instruction: System Operation
(Work only then CPL=0)
Instruction: LOADALL
Description:
Load All Registers (Include Shadow Registers) from Table
Which Begin on 000800H Address, Len of this table is
66H
Format of LOADALL Table:
Address Len Description
800H 6 None
806H 2 MSW
808H 14 None
816H 2 TR
818H 2 FLAGS
81AH 2 IP
81CH 2 LDTR
81EH 2 DS
820H 2 SS
822H 2 CS
824H 2 ES
826H 2 DI
828H 2 SI
82AH 2 BP
82CH 2 SP
82EH 2 BX
830H 2 DX
832H 2 CX
834H 2 AX
836H 6 ES Shadow Descriptor
83CH 6 CS Shadow Descriptor
842H 6 SS Shadow Descriptor
848H 6 DS Shadow Descriptor
84EH 6 GDTR
854H 6 LDT Shadow Descriptor
85AH 6 IDTR
860H 6 TSS Shadow Descriptor
Format of Shadow Descriptor:
Byte Description
0-2 24bit Phisical Address
3 AR (Access Right) byte
4-5 16bit Segment Limit
Format of GDTR and IDTR:
Byte Description
0-2 24bit Phisical Address
3 0s
4-5 16bit Segment Limit
Flags Affected: All (FLAGS Register Reload)
CPU mode: RM, PM0
Physical Form: LOADALL
COP (Code of Operation): 0FH 05H
Clocks: 80286 : 195
---------------------------------------------------
RDMSR - Read From Model Specified Register
---------------------------------------------------
CPU: Pentium (tm)
Type of Instruction: Operation
Instruction: RDMSR
Description:
IF (ECX is valid number of MSR) and (CPL=0) THEN
{
EDX:EAX <- MSR [ECX];
}
ELSE
{
General Protection Fault INT 0DH (0)
}
END
Flags Affected: None
CPU mode: RM, PM0, SMM
Physical Form: RDMSR
COP (Code of Operation): 0FH 32H
Clocks: Pentium : 20-24
---------------------------------------------------
RDTSC - Read From Time Stamp Counter
---------------------------------------------------
CPU: Pentium (tm)
Type of Instruction: Operation
Instruction: RDTSC
Description:
IF (CR4.TSD=0) or ( (CR4.TSD=1) and (CPL=0)) THEN
{
EDX:EAX <- TSC;
}
ELSE
{
General Protection Fault INT 0DH (0)
}
END
Note: TSC is one of MSR and after global hardware reset (not SRESET , but
RESET) it clear to 0000000000000000H.
(But what about frequency ???)
Flags Affected: None
CPU mode: RM, PM0, SMM
; PM, VM if enable
Physical Form: RDTSC
COP (Code of Operation): 0FH 31H
Clocks: Pentium : n/a [20-24]
---------------------------------------------------
REPC - Repeat While Carry Flag
---------------------------------------------------
CPU: NEC V20, NEC V30, etc [ Vxx seria ]
Sony V20, Sony V30
Type of Instruction: Prefix
Instruction: REPC
Description:
DO
CX=CX-1;
SERVICE_PENDING_INTERRUPT;
STRING_INSTRUCTION;
LOOPWHILE ( (CX<>0) AND (CF==1));
Flags Affected: None
CPU Mode: RM 8086
Physical Form: REPC
COP (Code of Operation): 65H
Clocks: NEC V20 : 2
NEC V30 : 2
---------------------------------------------------
REPNC - Repeat While Not Carry Flag
---------------------------------------------------
CPU: NEC V20, NEC V30, etc [ Vxx seria ]
Sony V20, Sony V30
Type of Instruction: Prefix
Instruction: REPNC
Description:
DO
CX=CX-1;
SERVICE_PENDING_INTERRUPT;
STRING_INSTRUCTION;
LOOPWHILE ( (CX<>0) AND (CF<>1));
Flags Affected: None
CPU mode: RM 8086
Physical Form: REPNC
COP (Code of Operation): 64H
Clocks: NEC V20 : 2
NEC V30 : 2
---------------------------------------------------
RES3 - Restore All CPU Registers
---------------------------------------------------
CPU: AMD Am386SXLV, Am386DXLV
also all AMD's 486 which support SMM
Type of Instruction: System Operation
(Work only then CPL=0)
Instruction: RES3
Description:
Load All Registers (Include Shadow Registers) from Table
Which Begin on place pointed ES:EDI
Note:
This instruction is AMD analog Intel's LOADALL instruction
but it's more i.c. return from SMM used this instruction.
Then in SMM table is in SMRAM, then non SMM then table is
in main memory.
Format of RES3 Table:
Offset Len Description
0H 4 CR0
4H 4 EFLAGS
8H 4 EIP
CH 4 EDI
10H 4 ESI
14H 4 EBP
18H 4 ESP
1CH 4 EBX
20H 4 EDX
24H 4 ESX
28H 4 EAX
2CH 4 DR6
30H 4 DR7
34H 4 TR (16 bit, zero filled up)
38H 4 LDT ---------
3CH 4 GS ---------
40H 4 FS ---------
44H 4 DS ---------
48H 4 SS ---------
4CH 4 CS ---------
50H 4 ES ---------
54H 4 TSS.attrib
58H 4 TSS.base
5CH 4 TSS.limit
60H 4 Reserved
64H 4 IDT.base
68H 4 IDT.limit
6CH 4 REP OUTS overrun flag
70H 4 GDT.base
74H 4 GDT.limit
78H 4 LDT.attrib
7CH 4 LDT.base
80H 4 LDT.limit
84H 4 GS.attrib
88H 4 GS.base
8CH 4 GS.limit
90H 4 FS.attrib
94H 4 FS.base
98H 4 FS.limit
9CH 4 DS.attrib
A0H 4 DS.base
A4H 4 DS.limit
A8H 4 SS.attrib
ACH 4 SS.base
B0H 4 SS.limit
B4H 4 CS.attrib
B8H 4 CS.base
BCH 4 CS.limit
C0H 4 ES.attrib
C4H 4 ES.base
C8H 4 ES.limit
Unknown Unusable area
100H 4 Temporary register
104H 4 -------------
108H 4 -------------
10CH 4 -------------
110H 4 -------------
114H 4 -------------
118H 4 -------------
11CH 4 -------------
120H 4 -------------
124H 4 Last EIP (Last instruction EIP for Restart)
Format of Attrib field:
Byte Description
0 0s
1 AR (Access Right) byte in the Descriptor format
Note:
P bit is a valid bit
if valid bit=0 then Shadow Register is invalid and
INT 0DH - General Protection Fault call
DPL of SS, CS det. CPL
2-3 0s
Flags Affected: All (FLAGS Register Reload)
CPU mode: RM, PM0, SMM
Physical Form: RES3
COP (Code of Operation): 0FH 07H Note: Code is same with Intel's LOADALL
Clocks: Am386SXLV : 366
Am386DXLV : 291
---------------------------------------------------
RSM - Resume from System Managment Mode
---------------------------------------------------
CPU: I486 SL Enhanced+, i486SL, i386CX, i386EX
Type of Instruction: System
Instruction: RSM
Description:
Restore execution state from SMRAM and
return to previous CPU mode
CPU mode: SMM only
(INT 6 - Undefined Opcode in all other mode)
Flags Affected: All
Note: CPU state restored from dump created entrance to SMM.
The CPU leave SMM and return to previous mode.
If CPU detect any invalid state it enters shutdown.
This invalid states is:
* The value stored in State Dump Base field is not 32K aligned
address
* Any Reserved bit of CR4 is set to 1 (Pentium only)
* Any illegal Combination of CR0:
** (PG=1 and PE=0)
** (NW=1 and CD=0)
Physical Form: RSM
COP (Code of Operation) : 0FH AAH
Clocks: i386CX : 338
i486 SL Enhanced : ???
IntelDX4 : 452 ; SMBASE relocation
: 456 ; AutoHALT restart
: 465 ; I/O Trap restart
Pentium : 83
---------------------------------------------------
SETALC - Set AL to Carry Flag
---------------------------------------------------
CPU: Intel 80286 and all its clones and upward
compatibility chips
Type of Instruction: Operation
Instruction: SETALC
Description:
IF (CF=0) THEN AL:=0 ELSE AL:=FFH;
Flags Affected: None
CPU mode: RM, PM, VM, SMM
Physical Form: SETALC
COP (Code of Operation): D6H
Clocks: 80286 : n/a [3]
80386 : n/a [3]
Cx486SLC : n/a [2]
i486 : n/a [3]
Pentium : n/a [3]
---------------------------------------------------
SMI - System Managment Interrupt
---------------------------------------------------
CPU: AMD Am386SXLV, Am386DXLV
AMD 486s
Type of Instruction: System
Instruction: SMI
Description:
IF (SMIE=1) THEN
{
SAVE STATUS OF EXECUTION TO SMRAM;
ENTER SMM;
SMMS <- 1;
}
ELSE
{
INT 1;
}
END
Notes: SMIE is <Soft SMI Enable> (DR7.bit12)
=1 Enable soft SMI
=0 Disable soft SMI
SMMS is <SMM status bit> (DR6.bit12)
=1 SMM was entered
=0 SMM status cleared
Flags Affected: None
CPU mode: RM?, PM0
Physical Form: SMI
COP (Code of Operation): F1H
Clocks: Am386SXLV : 357
Am386DXLV : 325
Am486xxxx : Don't know, do you?
---------------------------------------------------
UMOV - Mov Data to Main (User) Memory
---------------------------------------------------
CPU: AMD Am386SXLV, Am386DXLV
AMD 486s
Type of Instruction: Operation
Instruction: UMOV dest, sorc
Description:
dest <- sorc;
Note!!!!!: But all memory operands placed in Main memory only !
(i.e. not in SMRAM then in SMM)
Flags Affected: None
CPU mode: RM?, PM?, VM?, SMM
+++++++++++++++++++++++
Physical Form: UMOV r/m8, r8
COP (Code of Operation) : 0FH 10H Postbyte
Clocks:
Am386SXLV or AM386DXLV: 2/2
+++++++++++++++++++++
Physical Form: UMOV r/m16, r16
UMOV r/m32, r32
COP (Code of Operation) : 0FH 11H Postbyte
Clocks:
Am386SXLV or AM386DXLV: 2/2
+++++++++++++++++++++++
Physical Form: UMOV r8, r/m8
COP (Code of Operation) : 0FH 12H Postbyte
Clocks:
Am386SXLV or AM386DXLV: 2/4
+++++++++++++++++++++
Physical Form: UMOV r16, r/m16
UMOV r32, r/m32
COP (Code of Operation) : 0FH 13H Postbyte
Clocks:
Am386SXLV or AM386DXLV: 2/4
---------------------------------------------------
WBINVD - Write Back and Invalidate Cache
---------------------------------------------------
CPU: I486 +
Type of Instruction: System
Instruction: WBINVD
Description:
IF (internal cache is WB) THEN
{
Write Back Internal Cache;
}
Flush internal cache;
Signal external cache to Write Back;
Signal external cache to Flush;
Notes: This instruction not work in Real Mode and in
Protected mode work only in ring 0 ;
Flags Affected: None
CPU mode: PM0, SMM
Physical Form: INVD
COP (Code of Operation): 0FH 09H
Clocks: Cyrix Cx486SLC : 4
i486 : 5
Pentium : 2000+
---------------------------------------------------
WRMSR - Write to From Model Specified Register
---------------------------------------------------
CPU: Pentium (tm)
Type of Instruction: Operation
Instruction: WRMSR
Description:
IF (ECX is valid number of MSR) and (CPL=0) THEN
{
MSR [ECX] <- EDX:EAX;
}
ELSE
{
General Protection Fault INT 0DH (0)
}
END
Flags Affected: None
CPU mode: RM, PM0, SMM
Physical Form: WRMSR
COP (Code of Operation): 0FH 30H
Clocks: Pentium : 30-45
---------------------------------------------------
XADD - Exchange and addition
---------------------------------------------------
CPU: i486+
Type of Instruction: Operation
Instruction: XADD dest, sorc
Description:
Temporary <- dest;
dest <- dest + sorc;
sorc <- Temporary;
Flags Affected: ZF, OF, SF, AF, PF, CF (like ADD instruction) (see description)
CPU mode: RM, PM, VM, SMM
+++++++++++++++++++++++
Physical Form: XADD r/m8, r8
COP (Code of Operation) : 0FH C0H Postbyte
Clocks:
Intel i486 : 3/4
Cyrix Cx486SLC : 3/6
Pentium (tm) : 3/4
Penalty if cache miss :
Intel i486 : 6/2 ; Unlocked/Locked
Cyrix Cx486SLC : 0 ; N/A
+++++++++++++++++++++
Physical Form: XADD r/m16, r16
XADD r/m32, r32
COP (Code of Operation) : 0FH C1H Postbyte
Clocks:
Intel i486 : 3/4
Cyrix Cx486SLC : 3/6
Pentium (tm) : 3/4
Penalty if cache miss :
Intel i486 : 6/2 ; Unlocked/Locked
Cyrix Cx486SLC : 1 ; N/A
---end of file---end of file---
Reference in New Issue View Git Blame Copy Permalink