75 lines
2.4 KiB
Plaintext
75 lines
2.4 KiB
Plaintext
|
||
|
||
|
||
|
||
AST RESEARCH, INC. TECHNICAL BULLETIN #TB-0343 11/19/87
|
||
AST-5250/GATEWAY INSTALLATION
|
||
|
||
|
||
This technical bulletin is written as a guide for installation
|
||
of the AST-5250/Gateway.
|
||
|
||
I. THINGS TO CHECK BEFORE RUNNING GATEWAY EMULATION:
|
||
|
||
A. On the master gateway bring up emulation for all the
|
||
sessions that will be used on the gateway. Perform this
|
||
by defining the sessions under STATION as regular
|
||
displays, not GATEWAY displays, in the CFG5251 program
|
||
and running KERNEL and APS without GATE5251. This will
|
||
verify that those sessions are available and correctly
|
||
configured on the host.
|
||
|
||
B. Ensure the network (NETBIOS) is running.
|
||
|
||
II. SETTING UP THE GATEWAY:
|
||
|
||
A. Master Gateway: CFG5251 program configuration
|
||
|
||
1. Type "CFG5251"
|
||
|
||
2. Answer YES to Master Gateway question.
|
||
|
||
3. Define sessions to be used by the master as DISPLAYS
|
||
or PRINTERS under the STATION option.
|
||
|
||
4. Define sessions to be distributed on the network as
|
||
GATEWAY DISPLAYS or GATEWAY PRINTERS.
|
||
|
||
Give unique SESSION NAMES for each GATEWAY session
|
||
that will be on the network. Make a note of these
|
||
names and their corresponding sessions numbers.
|
||
|
||
5. If more than one gateway is being used, define a
|
||
unique NETWORK NAME in the GATEWAY option. If only
|
||
one gateway will be used leave the NETWORK NAME
|
||
blank.
|
||
|
||
6. SAVE configurations and QUIT.
|
||
|
||
7. In DOS type "KERNEL, GATE5251" and then "APS". These
|
||
commands could also be put in a batch file.
|
||
B. Slave Gateway: CFG5251G program configuration
|
||
|
||
1. Type "CFG5251G"
|
||
|
||
2. Answer NO to all initial questions.
|
||
|
||
3. Define all sessions to be used by this slave PC as
|
||
DISPLAYS or PRINTERS under the STATION option.
|
||
|
||
a. Ensure the session numbers and corresponding
|
||
SESSION NAMES match the master gateway
|
||
definitions, the name is case dependent.
|
||
|
||
b. If several gateways are being used make sure
|
||
the GATEWAY NAME matches the NETWORK NAME of
|
||
the desired master gateway.
|
||
|
||
4. SAVE configurations and QUIT.
|
||
|
||
5. In DOS type "KERNELGW" and then "APS". These
|
||
commands could also be put in a batch file.
|
||
|
||
|
||
|
||
|