54 lines
1.6 KiB
Plaintext
54 lines
1.6 KiB
Plaintext
AST RESEARCH TECHNICAL BULLETIN TB-0228 09/18/86
|
||
|
||
|
||
3G FAMILY COMPATIBILITY WITH STSC APL*PLUS SOFTWARE
|
||
|
||
|
||
Configuration:
|
||
|
||
IBM PC-AT (8 MHz) with 512 KB
|
||
30 MB FXD
|
||
3 MB Advantage!
|
||
3GPLUS/PAK/Model 1
|
||
IBM 5154 EGA Display/
|
||
IBM 5153 CGA Display
|
||
|
||
|
||
Software:
|
||
|
||
STSC APL*PLUS Release 5.2 with EGA support.
|
||
|
||
|
||
Results:
|
||
|
||
The software was installed using the three normal installation
|
||
diskettes and the special EGA diskette. There may be some
|
||
confusion during the installation, because there are two
|
||
diskettes labeled "Disk 1" (one of which is the special EGA
|
||
diskette), and both must be installed to properly use an EGA
|
||
adapter. If the user follows the instructions that are supplied
|
||
with the EGA diskette, there will not be any problem.
|
||
|
||
In order to execute the APL*PLUS program, the user MUST set up
|
||
the EGA environment for proper program execution. This is
|
||
accomplished by executing a .COM program provided on the EGA
|
||
special disk. For example, if the user has an EGA monitor
|
||
connected to the 3G board, then he must execute the program
|
||
ECDCHAR.COM prior to running APL*PLUS.
|
||
|
||
|
||
3GPLUS and 3GPAK
|
||
|
||
APL*PLUS PASSED testing without problem with the 3GPLUS/PAK with
|
||
both an EGA and a CGA monitor.
|
||
|
||
|
||
3G Model 1
|
||
|
||
APL*PLUS FAILED with both monitors. Failure occurs after
|
||
executing either ECDCHAR.COM or CLRnCHAR.COM to initialize the
|
||
working environment. With an EGA monitor, all text disappears
|
||
after running ECDCHAR. You have to cold boot to continue. With
|
||
a CGA monitor, garbage is displayed on the screen and a cold boot
|
||
is necessary to continue.
|
||
|