45 lines
2.1 KiB
Plaintext
45 lines
2.1 KiB
Plaintext
AST RESEARCH TECHNICAL BULLETIN TB-0131 11-01-85
|
||
|
||
|
||
COMPATIBILITY OF AST-5251/12 WITH HAYES 2400 BAUD MODEM
|
||
|
||
|
||
The Communications Department has completed testing of the Hayes 2400
|
||
baud modem. Our test showed that the Hayes modem will work with the
|
||
AST-5251/12 as long as the modem is configured properly.
|
||
|
||
To accomplish this, you will first need to attach the modem to an
|
||
asynchronous port, and then initialize it for 2400 baud with a
|
||
communications software package. After this has been accomplished,
|
||
you will want to send a set of "AT" commands to the modem.
|
||
|
||
For the modem that will reside at the PC, the commands are as follows:
|
||
|
||
AT&F................Sets modem to synchronous mode
|
||
AT&M2...............Store Number Dial (Auto-Dial mode)
|
||
AT&Z(Phone #).......Store telephone number
|
||
AT&R0...............CTS tracks RTS
|
||
ATS26=50............Sets RTS-CTS time delay
|
||
ATQ1................Disables result codes back to the terminal
|
||
ATE0................Inhibits Command Echo
|
||
AT&W................Writes configuration to nonvolatile memory
|
||
|
||
This will set the modem to Synchronous Auto-Dial. For the modem that
|
||
will reside at the host, the commands are as follows:
|
||
|
||
AT&F................Sets modem to synchronous mode
|
||
ATS0=1..............Sets modem to Auto Answer
|
||
AT&M3...............Manual dial through DTR control
|
||
AT&R0...............CTS tracks RTS
|
||
ATS26=50............Sets RTS-CTS time delay
|
||
ATQ1................Disables result codes back to the terminal
|
||
ATE0................Inhibits Command Echo
|
||
AT&W................Writes configuration to nonvolatile memory
|
||
|
||
This will set the modem to Synchronous Auto-Answer. After this has
|
||
been accomplished and the modems are attached to the system, you would
|
||
then bring up the AST-5251/12 package. When the 5251/12 is brought
|
||
up, it will cause DTR to rise and in turn the modem will start
|
||
dialing. When the two modems establish communications the squelch
|
||
will stop and the 5251/12 will be on-line.
|
||
|