textfiles/bbs/KEELYNET/GRAVITY/pzt1.asc

434 lines
22 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

(word processor parameters LM=8, RM=75, TM=2, BM=2)
Taken from KeelyNet BBS (214) 324-3501
Sponsored by Vangard Sciences
PO BOX 1031
Mesquite, TX 75150
There are ABSOLUTELY NO RESTRICTIONS
on duplicating, publishing or distributing the
files on KeelyNet!
July 15, 1991
PZT1.ASC
--------------------------------------------------------------------
This file was originally inspired by the file CENTER8.ASC in
addition to private researches into the work of John Worrell Keely.
The essence of the file was written in July of 1991.
--------------------------------------------------------------------
The Pressure Zone Theory (PZT)
by
Jerry W. Decker / Vangard Sciences / Dallas
John Worrell Keely used vibrating waveplates in his compound
vibrational research. These waveplates were inspired by the
original work of Ernst Chladni and used by Keely as analytical
devices.
The basic principle of a Chladni Waveplate involves the use of a
surface capable of stimulation by sonic sources. When the surface
is covered with a loose powder, usually lycopodium, (although it can
be sand for all practical purposes), is excited by various musical
tones, fascinating patterns will form; dictated by :
1) the modes of vibration of the reflecting medium, i.e, the
sand,
2) the acoustic properties of the vibrating body
3) and the frequency(ies) used.
The most famous modern day researcher into such modes of vibration
was the late Hans Jenny of Switzerland. Prior to his death, he had
been working on a system for the generation of three dimensional
images of complex vibrations. A most excellent film created by
Jenny is incorporated into a video by Dr. Peter Guy Manners,
entitled "Cymatics."
This film shows the most wondrous patterns formed from single and
multiple vibrations. In his advanced work, Jenny used a type of
fine plastic powder which had cohesive abilities leading to the
formation of shapes much like those found in nature. He also used
ferrous particles (iron filings) as a vibratory reflector (as in
sand), energized from below by a magnet. These formed patterns
which danced over the vibrating surface with fascinating effects.
The patterns remind one of those found in fractal generation
programs with either (or both) inflowing or outflowing forces. The
matter is therefore distributed using either a DISPERSING technique
when outflowing or a CONCENTRATING movement when inflowing.
Page 1
If you can find the video (usually from new age type bookstores or
sources), we highly recommend it, the name of the tape is "Cymatics"
and is by Dr. Peter Guy Manners of England.
Now, when considering excitation, we find that Nature uses two
different effects as indicators of a flow of force. That flow of
force can manifest as one of three possible modes of action AS
TAUGHT BY KEELY, i.e. PUSH, PULL OR BALANCE.
--------------------------------------------------------------------
THE INVERSE SQUARE LAW
(dissipation of force over expanding area)
In the case of a speaker exciting the flexible medium of air, we
find that a central shaft (the magnet), generates fluctuating
magnetic fields to PULL or PUSH a coil of wire attached to a
vibrating paper cone. The cone becomes the EXCITER for the air
emanating FROM A CENTRAL SOURCE.
Here we find the inverse square law in full control of the release
of energy from the CENTRALLY EXCITED AREA. As the energy expands
from the central area, it becomes ever more diffuse due to the
spreading out over a larger surface area.
Waves measured close to the central exciter will have a SMALLER
length than those measured at various distances from the center.
Thus, Nature uses various mediums (air, water, physical mass, etc..)
as a means of DIVIDING frequencies. Of course, as the wavelength
becomes longer the amplitude is also reduced due to expression over
a greater area.
It can be argued that this is NOT ALWAYS the case ESPECIALLY in the
event that a continuous wave is emitted from the central source.
When this occurs, reflections from the resistive/impeding effects of
the propagating medium can cause standing waves whose measured
distance will show the actual excitation freqency. The presence or
absence of a restraining wall will determine such phenomena.
But for all practical purposes, single high amplitude waves will
LESSEN in amplitude and INCREASE in wavelength (longer waves = lower
frequencies) depending on the resistive/impeding properties of the
medium in which the energy is dissipated and the presence of a
restraining boundary.
--------------------------------------------------------------------
THE RECIPROCAL INVERSE SQUARE LAW
(concentration of force over diminishing area)
In the case of a medium which vibrates over its entire volume, any
mass held within that volume will be INFLUENCED TO "CHARGE" (itself)
TO AN ENERGY STATE EQUIVALENT TO THE AVERAGE LEVEL FOR THE EXCITED
MEDIUM.
Higher energy charges will DISSIPATE BY A GRADUAL RELEASE OF ENERGY
into the overall localized area, while lower energy charges will
PULL ENERGY FROM THE BACKGROUND until all potentials equalize. (This
is one of the primary principles used in TRUE occult studies to
Page 2
generate various "miraculous" effects.)
Indications from various Biblical and metaphysical sources lead one
to believe that "beings" from higher dimensions (greater energy
levels) suffer great pain when making themselves known in our
dimension. Precisely due to this continual tugging of their energy
level DOWN to that of our dimension. This pain would be experienced
as a weakening of energy and ability including thought processes,
etc...
This is also the basic principle for the ZPE (Zero Point Energy).
That we are immersed in a SEA OF ENERGY, invisible to ourselves and
our instruments because we all EXIST AT THE SAME ENERGY LEVEL as our
background IN NORMAL CIRCUMSTANCES.
Without a difference of potential (i.e. a zero reference or ground),
we cannot effectively or reliably measure such an energy level.
Therefore, to actually tap such energy, we must create a "WELL" of
negativity (lesser energy) in order to create a ground.
To continue, when the medium is EXCITED, any mass WITHIN THAT MEDIUM
MUST BE PULLED UP TO THE AVERAGE ENERGY LEVEL OF THAT EXCITED
MEDIUM.
Those masses RESISTANT TO SUCH INFLUENCE MUST OF NECESSITY
"GRAVITATE" to areas of less energy. In other words, the energy
level of any given mass will serve as a level of DENSITY which will
seek to FIND ITS OWN LEVEL.
--------------------------------------------------------------------
CONDUCTION ZONES
Studies of lightning have shown that electrical energy as
encountered in the Earth's atmosphere can equalize from :
1) Cloud to Earth discharges
2) Earth to Cloud discharges (reverse lightning)
3) Cloud to Cloud discharges
All Nature strives to maintain balance between like forces through
seepage or discharges, depending on the amplitude (buildup) of the
energy.
In any medium, the energy level measured at any given point will NOT
NECESSARILY be a reliable indicator of the AVERAGE ENERGY LEVEL as
measured at any other point. Homogeneity (uniform structure) is
rarely accomplished in Nature as a direct result of Keely's PUSH
continually fighting the PULL. A BALANCE is achieved on rare
occasions and can present interesting effects.
If one imagines a tank of water with various substances floating in
it (note, IN, not ON the surface) as "clouds" of relatively
homogenous mass, though highly attenuated (spread out) due to the
presence of the supporting medium (i.e. the water), then these
"clouds" would act as resistors or areas of greater or lesser
conductance.
Page 3
Such "clouds" will cause variations in any measurements taken at
various points within the medium.
In the case of lightning, we see how areas of conductance can be
biased with a more negative or a more positive charge.
Since the Earth is generally regarded as being negative, it can have
areas of greater negativity or LESSER NEGATIVITY (resulting in earth
to cloud discharges).
A rapid buildup of positive charge in a localized area would not
have time to disperse within the overall surrounding negative medium
of the earth due to various properties of that surrounding soil.
When this occurs, we h ave "reverse lightning."
These soil properties would be much like N and P type conductors in
solid state components, reducing the speed with which the potentials
would equalize from one soil area to another.
In the same vein, ANY OTHER MEDIUM (INCLUDING THE KING OF ALL,
AETHER), can have such CONDUCTION ZONES.
--------------------------------------------------------------------
PRINCIPLE OF LEAST ACTION
Considering this phenomenon from a less energetic standpoint, we
will use physical matter as a more understandable analogy.
A stream of water such as a river (or any other medium), has a
general speed of flow. Other streams which blend with the primary
stream usually flow slower and are attracted by the Venturi effect
(suction generated from high velocity flow, as also demonstrated
with ORGONE by Reich and Constable, SINCE ORGONE ATTRACTS MOISTURE).
Victor Schauberger found that in any natural flow of water, the path
would take on the form of curves AND NOT STRAIGHT LINES. These
curves produce a braking effect on the overall speed of the water.
Additionally, water has a cohesiveness (wetting) which causes it to
stick to other mass. As a direct result of this, moving water as
measured from the center of the flow will have a much faster speed
than that measured at the retaining wall.
This creates overlapping "shells" of flowing water dictated by the
amount of turbulence encountered from the walls and the re-combining
of the water through deflection from various layers moving at
different speeds.
The phenomenon is generally referred to as LAMINAR FLOW because the
water will separate into tubes within tubes of ever more rapidly
flowing fluid. The closer one gets to the center, the faster will
be the flow.
Now, when you have a flow of material moving at one speed, water in
this case, coming into contact with another flow of the same
material, moving at a greater or lesser speed, you have interesting
phenomena. The fluids will strive to achieve balance between the
two separate speeds, which in effect will CREATE A THIRD SPEED.
Page 4
In electronics, this is known as the principle of heterodyning. It
involves the mixing of two signals to generate TWO ADDITIONAL
FREQUENCIES for a total of four. The other two are the SUM and
DIFFERENCE of the two primary frequencies.
For instance, if we have F1=1000 CPS, F2=8000 CPS, then we subtract
F1 from F2 and get 7000 CPS, then we add F1 plus F2 to get 9000 CPS.
This gives us four separate frequencies (though there are more) from
such a simple process. (i.e. 1000, 7000, 8000, 9000 CPS)
Nature takes full advantage of such simple principles to generate
ever more complex forms from ever more complex wave blending.
Now as these waves BLEND or INTERFERE WITH EACH OTHER, they create
zones of lesser physical activity. The closer one goes to the
center of the flow, the greater will be the overall activity level
(equate activity to energy).
In the case of physical mass, the smaller the body, the easier it is
to move at a fast rate of motion. The larger the body, the more
difficult it is to move AT A FAST RATE OF SPEED.
Particles of mass will in general seek the area or level of least
physical movement which Nature provided to prevent the particles
from being destroyed by the INCESSANT PERCUSSION of the high
activity motion.
BECAUSE OF THIS NATURAL TENDENCY, all mass will seek the activity
(energy) level of least motion.
Remaining within the context of water flow, the curves of a river
tend to "attract" loose materials as a DIRECT RESULT of the
REDUCTION IN MOTION of the water in that LOCALIZED AREA.
These loose materials take the form of floating objects such as wood
or other objects with densities greater than that of the water
itself and can include rocks on the river bottom. The accumulation
of mass to the areas of lesser motion PRESENTS THE LEAST ACTION on
the surface of the mass.
This principle expands into one of Universal importance (As Above,
So Below) which offers astounding possibilities.
--------------------------------------------------------------------
We can therefore consider all physical structures as Chladni
Waveplates, with the Universe as a giant 3 dimensional Chaldni
Waveplate.
In the book, "How to Build a Flying Saucer", Thom Pawlicki offers a
theory on how the planets are sustained within our Solar System and
why they rotate around our Solar System. He likens the sun to the
magnet of a speaker with the various standing waves creating the
orbits of the planets. These standing waves have their own internal
motion which acts to propel each planet around the Sun.
Additionally, each planet or mass aggregation or sun will function
AS IT'S OWN EXCITER, thus creating a waveplate DRIVEN and CONTROLLED
by the amplitude and frequencies of the controlling exciter (the
Page 5
planet), yet still under control of the Solar Exciter (the Sun).
To expand our PZT concept to Universal proportions, we can see how
each of these aggregations will be a series of layers, quantized if
you will, into successively MORE INTENSE ENERGY LEVELS as one
proceeds AWAY FROM THE ACCUMULATIONS OF MASS. Remember that mass
will be seeking levels of LEAST activity (or energy level).
Einstein's famous E=MC squared shows how mass converts to energy and
energy converts to mass. Now if Aether is in fact, extremely high
frequencies (ergo, levels of high energy) and that energy is slowed
down sufficiently (see NEUTRAL1 on KeelyNet), then the energy will
convert to mass AS A PRE-REQUISITE for the ability of that mass TO
REMAIN in a level of low energy density.
This "LEVEL OF LOW ENERGY DENSITY" directly points to the
probability that the Aether is HIGHLY ATTENUATED (tenuous in Keely's
terms) in areas WHICH SUSTAIN mass aggregations.
Each of these layers becomes ever more dense (has a higher energy
level) as one goes deeper into space until the maximum density
(energy level) is achieved, the GODHEAD if you will.
Now that you have this pictured in your mind, you can see how the
interactions of the various energy layers around a mass would serve
to establish a background level equivalent to the largest mass
aggregation (the ruling body) which would provide the first level of
background energy density.
Note also, that since Aether is more diffuse in the areas of mass
due to its conversion into matter from E=MC squared, then THE MASS
WILL PROVIDE THE RULING BACKGROUND ENERGY LEVEL. As opposed to the
energy levels found in deep space.
These various energy levels would in turn interfere to cause nodes
of relative stillness which FORCE THE MASS TO LOCATE TO THE MOST
STILL POINT or area of LEAST ACTIVITY. However, even that can be
argued by the tendency of a mass to seek its OWN energetic level and
NOT NECESSARILY the point of LEAST activity.
Not gravity as we currently conceive it but a PUSHING FORCE from the
rapidly moving energy levels TOWARDS the areas of GREATEST STILLNESS
(least energy or activity).
With the inverse square law, an excited mass from a central point
causes energy to DISSIPATE as it moves farther from that exciting
point or mass center.
In the case of the Pressure Zone Theory,
the BACKGROUND IS THE EXCITED MASS
and therefore consists of "ripples in the fabric of space" which act
like waves of water to force particulate matter INTO the areas of
stillness. Thus, the RECIPROCAL of the Inverse Square Law prevails
in this case. The energy remains the same except that it is
"crystallized" in the form of mass. As it is released, it SEEKS ITS
LEVEL OF DENSITY (energetically speaking).
Page 6
The realization here is that the areas of least activity ARE A
DIRECT RESULT OF INTERFERENCE BETWEEN HIGH ENERGY FLOWS, forming
"nodes" of stillness or least activity when measured with
surrounding energy flows or activity levels.
Force is thus continually concentrated from the outside movements of
energy and high activity with the end result of "deflecting" mass
towards those "zones of stillness" resulting from interference.
In order to protect the integrity of a structure from being torn
apart by excess vibration stimulated by the medium in which it
resides, the mass will naturally locate to the areas of least
activity.
Thus, levitation (and a host of other phenomena including free
energy) is simply the establishment of a sufficiently high ENERGY
DENSITY in a contained area which causes the mass to "escape" to the
density layer which matches itself. Just like ballast in a
submarine.
That is why Searle, Tesla, Keely, Carr and Biefeld/Brown as well as
others LOCALIZED ENERGY to ever higher densities. They all did it
but using different types of energy.
Searle used both rotation and high voltage DC, Tesla used high
voltage/high frequency AC, Keely used high intensity sound waves
(remember "shock excitation"), Carr used physical rotation greater
than the Earth's circumference thereby increasing the magnetic field
of the craft, and Biefeld/Brown used high voltage DC and later
rotation, all to generate lift TO AN ENERGY DENSITY (or level)
CLOSER TO THAT OF THE EXCITED BODY.
--------------------------------------------------------------------
If you have comments or other information relating to such topics
as this paper covers, please upload to KeelyNet or send to the
Vangard Sciences address as listed on the first page.
Thank you for your consideration, interest and support.
Jerry W. Decker.........Ron Barker...........Chuck Henderson
Vangard Sciences/KeelyNet
--------------------------------------------------------------------
If we can be of service, you may contact
Jerry at (214) 324-8741 or Ron at (214) 242-9346
--------------------------------------------------------------------
Page 7