141 lines
8.0 KiB
Plaintext
141 lines
8.0 KiB
Plaintext
______________________________________________________________________________
|
|
| File Name : TOMIFLAT.ASC | Online Date : 05/15/95 |
|
|
| Contributed by : Ossie Callahan | Dir Category : ENERGY |
|
|
| From : KeelyNet BBS | DataLine : (214) 324-3501 |
|
|
| A FREE Alternative Sciences BBS sponsored by Vanguard Sciences |
|
|
| KeelyNet * PO BOX 870716 * Mesquite, Texas * USA * 75187 |
|
|
| Voice/FAX : (214) 324-8741 InterNet - keelynet@ix.netcom.com |
|
|
| WWW sites - http://www.eskimo.com/~billb & http://www.protree.com |
|
|
|----------------------------------------------------------------------------
|
|
The following excellent file shows another way of constructing the TOMI.
|
|
------------------------------------------------------------------------------
|
|
|
|
Author: Ossie Callanan
|
|
|
|
From: Melbourne Australia
|
|
|
|
Introduction:
|
|
|
|
I have been experimenting and conducting research in alternative sciences for
|
|
a number of years. For the last few years I have concentrated mainly on
|
|
alternative, or as it was most commonly known, 'free', energy research as the
|
|
results of such research have far reaching consequences for the future of the
|
|
world as we know it and may decide if we have a future or not.
|
|
|
|
I share the views of most other independant researchers who do not have a
|
|
vested interest financially in the results of their research and are of the
|
|
belief that only full disclosure of all of our results can prevent any
|
|
suppression of this technology that has been taking place for so long.
|
|
|
|
From a very young age I was always interested in electronics and have built
|
|
a great many devices of my own design. It started becoming apparent to me,
|
|
whilst studying for my diploma in electronics, that what I was being taught
|
|
was established electrical and physical principles that had been worked out
|
|
a great many decades ago and all I was being taught was updated uses of what
|
|
was basically old science.
|
|
|
|
It wasn't to long after beginning my research into alternative sciences that
|
|
the reasons for this became all to apparent. I do not wish to bore you with
|
|
the ignorant politics of the suppression that has been taking place as I am
|
|
sure you would be aware of it already. I believe the best way to beat the
|
|
suppression is to share the results so that others may duplicate and further
|
|
develop the technology and not try to selfishly look to the gain of ones self
|
|
at the expense of preventing the gain to a great many.
|
|
|
|
One of the most important aspects of any device is its simplicity and the
|
|
ability for others to duplicate it and its claimed results. One of the best
|
|
I've seen so far that meets this requirement is the TOMI device or Theory Of
|
|
Magnetic Instability device to which I commend the inventor. This is one such
|
|
device that any body new to the new energy seen should build as it definately
|
|
shows them something that works and further inspires one to take a serious
|
|
look into this type of research.
|
|
|
|
The purpose of this text is to give to all, my results and modifications to
|
|
the TOMI device in its linear form so that it is much simpler to duplicate.
|
|
|
|
If this is the first time you've heard of the TOMI device, whilst reading
|
|
this text, I suggest that you first read the original and other previous
|
|
texts written on the device by the inventor (Stewart Harris of Las Vegas) and
|
|
his associates. (see TMIDEVIC, TOMIBILD, TOMIMOTR, & MAGSPIN on KeelyNet)
|
|
------------------------------------------------------------------------------
|
|
The Flat Linear TOMI Device
|
|
|
|
After reading and duplicating the original TOMI device, I was intrigued by
|
|
the need to have a track that consisted of ramps of inclination and
|
|
declination although at the time I percieved that one of the requirements
|
|
for the device to work was for it to utilise both gravitation and magnetic
|
|
anomalies.
|
|
|
|
After considerable experimentation I found that I was able to completly do
|
|
away with the gravitational component of the device, which held the need for
|
|
ramps of inclination and declination, and have a device that was completely
|
|
driven by the magnetic anomally itself on a completely flat horizontal linear
|
|
track of unlimited length. This makes duplication of the device and the result
|
|
almost foolproof.
|
|
|
|
All one needs to make this version of the device is a stack of button magnets
|
|
(I used the round holeless ferrite type- 10mm diameter by 5 mm thick), a role
|
|
of double sided tape, a little bit of masking tape and a flat table top. There
|
|
is no need to make any special ramped track as the table top is used for your
|
|
flat track.
|
|
------------------------------------------------------------------------------
|
|
Construction
|
|
|
|
First make the roller. This is the same as described in the original TOMI
|
|
device text and consists of 7 to 10 magnets of the same polar direction stuck
|
|
together in a role and held together with a bit of masking tape.
|
|
|
|
Next lay two parallel and straight lines of double sided tape on the table
|
|
top. The distance between the two lines of tape should be the length of roller
|
|
plus 1.5 to 2 inches. Peel off the top of the double sided tape and now you
|
|
are ready for the most important part, the laying of the track magnets.
|
|
|
|
This is the most important and unique part that I have developed, which lets
|
|
the device work on a flat linear track. The track magnets are not stuck
|
|
together but are individually seperated by a gap or shall I say a gap of two
|
|
different distances.
|
|
|
|
Place the magnets one by one on the first line of double sided tape all in
|
|
the same polar direction with the polar axis parallel to the tape. In between
|
|
the magnets leave a gap of a certain length and then a gap of double the
|
|
length for every alternate gap. The gap distance I used for the type of
|
|
magnets I had was 5 mm and 10 mm respectively. This alternation of gap
|
|
distance is the key to continuous operation on a flat horizontal track.
|
|
|
|
The gap distance or the fact that one is double the other is not crucial and
|
|
is variable. What is crucial is the alternation of the gap distances because
|
|
if they were all the same distance, the propulsive magnetic anomally will only
|
|
occur at the beginning and the end of the track limiting the length of the
|
|
track, this is why a ramped track was necessary in the original TOMI device.
|
|
|
|
When two alternate gap distances are used, the propulsive anomally is present
|
|
throughout the length of the track allowing an unlimited length of track that
|
|
is flat and horizontal although it may work on a constant incline of which
|
|
depends on the propulsion strength.
|
|
|
|
To complete construction place another row of magnets on the other line of
|
|
double sided tape except the polarities must be opposite that of the first
|
|
line of magnets and parallel to the length of the track. Make sure that the
|
|
magnets line up perpendicular to the length and in line with the magnets on
|
|
the other line of tape.
|
|
|
|
Now that you have finished the track all you have to do is place the roller
|
|
anywhere in the track (perpendicular to the length of the track of course)
|
|
and it will roll in its appropriate polar direction till it reaches the end
|
|
of the track. The roller may be turned over swapping its own polar direction
|
|
and you will find it will also roll in the opposite direction till it reaches
|
|
the end of the track.
|
|
------------------------------------------------------------------------------
|
|
I also recommend people who have duplicated this device, try and develop it
|
|
into some form of rotary rotor type orientation which in effect will make it a
|
|
permanent magnet motor requiring now input energy.
|
|
|
|
I am continuing in this direction myself though at present I make no claims to
|
|
having done so and personally do not release any results of my research until
|
|
I have a working model myself.
|
|
|
|
I recommend anyone researching the field of alternate energy to make this
|
|
device as I feel that a duplicatable working device is worth a thousand
|
|
theories.
|
|
------------------------------------------------------------------------------
|