2021-04-15 13:31:59 -05:00

265 lines
12 KiB
Plaintext

(word processor parameters LM=8, RM=75, TM=2, BM=2)
Taken from KeelyNet BBS (214) 324-3501
Sponsored by Vangard Sciences
PO BOX 1031
Mesquite, TX 75150
There are ABSOLUTELY NO RESTRICTIONS
on duplicating, publishing or distributing the
files on KeelyNet except where noted!
February 18, 1994
PYRAMID2.ASC
--------------------------------------------------------------------
This file shared with KeelyNet courtesy of Jeff Johnston.
--------------------------------------------------------------------
PYRAMID POWER AND OTHER EFFECTS
from Jeff Johnston
Some of my research was based on following experiments that other
people have performed. The one item that got me started was an
electron microscopic photograph of a razor blade that had been
treated in a pyramid.
There was a BEFORE and AFTER shot showing how the metal had re-
generated itself at the crystalline level. I found this very
interesting, because to me it seemed like pretty good verification
for some kind of effect. I suspect that multiple frequencies are
involved and that is why I branched out in the direction of bio-
medical effects, i.e. brainwave activity, some form that could be
tried out with different people under different circumstances, to
see any consistancy of effects.
I did this research and other experiments that I haven't described
yet, about 8 or 9 years ago. This pyramid power effect is only part
of what I have been tracking as a larger effect that works in other
areas too. This may sound a little crazy but from what I can tell so
far from my research, it is linked to type of "Earth Energy Effect"
(I need some sort of name to try to describe this) that has been
used in various forms throughout what we know as "recorded history".
When I have more time available I will attempt to write a summary of
experiments performed over the last 20 years. This involves pyramid
power and other related material. One of my conclusions is that
SHAPE has an effect on surrounding matter, and that it doesn't have
to be in the exact shape of a pyramid to have an effect.
For example, I have experimented with altering the base angle to
apex ratio and found that other shapes will work also. This led me
into another area in the design of antennas for capturing this type
of energy. I built a few prototype designs that were not even square
and still got some results. Not always as good results as using a
standard pyramid, but they did something.
To answer your question: YES. The longest running experiment that I
did in this area was a preservation experiment that lasted 18
months. I used a piece of raw pork. If anything is going to go bad,
Page 1
raw pork will in about 48 hours. After 18 months there was no
evidence of it smelling or being bad.
The following is a reply to answer some questions.
In answer to the question what brainwave states did the subjects
experience: Alpha, Beta and Theta. In most subjects alpha was
experienced in the first 15 minutes.
About half of the group experienced theta around the 40 to 50 minute
time frame. I tried several lengths of time, 1 hour, 1 and 1/2
hours, 2 hours, and 3 hours. I experimented with a number of
variables of time length, also the time of day the experiment was
done. I was looking for some connection to some research done in
Germany starting in the 1940's dealing with what had now come to be
known as Cosmobiology. (Today the Russians take this quite seriously
and continue doing research in this area.)
Cosmobiology is still "alive" and well in Germany today, as well as
some research being done in the United States. Cosmobiology deals
with cycles of time. It was some of the original research that
spawned another subject, biorhythms. Now, a lot of what is being
done as biorhythms today has kind of strayed from the original path,
and the type of programs or information I see on the subject today
has been diluted quite a bit and as a result a lot of the accuracy
has been lost.
So please don't judge the Parent Cosmobiology, by the Child,
Biorhythms who, due to misunderstanding and lack of applied methods
has caused some people to question it's validity. For biorhythms to
work properly it has to be based on the exact time of the begining
of the cycle. This means to the nearest minute. Most software
programs available today are only in the ballpark because they are
based on a window of time that is 24 hours wide. This is too wide
for accurate results in my opinion.
Consult the original research done in this area and I think you will
see why. It's a question of methodology. See Rineholt Ebertein et
al.
In answer to the question: Am I still doing research into the
pyramid effect? Yes I am, but not just "pyramid" research. I am in
the slow process of writing a book that includes some of the
information of pyramid effects but the core of the book material is
on some other subjects that are related. These involve some of the
things I stumbled across while doing research on the pyramid effects
and other fields that at first I thought were entirely unrelated.
In answer to what type of control materials to use: I would
recommend using two items as closely matched as possible. For
example, If you are planning on using razor blades in an experiment
then be sure that both the control and the experimented blade are
from the same SET or package from the same manufacturing facility.
If using fruit or organic material, then for example, use one apple
but cut the apple in half using one side for control and one side
for the experiment.
On the subject of controls, be sure that the area that you are doing
Page 2
the experiment in is as closely matched as possible in temperature,
humidity, light, electromagnetic fields, alignment, etc., and that
the area being observed be as secure as possible.
The reason I say that is once upon a time I had an experiment that
ran for several weeks and I got one result. I re-ran it and got
another result. I re-ran it again and got another result. Well by
this time I was wondering what the problem was, and after a lengthy
investigation found out that someone in my household had been
cleaning in the area and unknowingly contaminated the experiment.
(Drove me crazy trying to figure it out.)
If you are doing preservation experiments, or any other for that
matter, be sure you do not exceed 5% of the volume of the pyramid.
In answer to the question: Can you eat fruit preserved in a pyramid?
Yes. I have eaten lots of things preserved this way. (This was done
8 or 9 years ago, I am still alive so I guess there are no known
toxic effects.)
One of my organic subjects was a carrot that at the beginning of the
experiment was about 9 inches long by 1 and 1/4 inch around. 18
months later this carrot was about 3 inches long and about the size
of a pencil around. I ate it. It tasted fine, had a good flavor and
seemed to me not to have changed too much except for the water
content.
In answer to the question: What materials did I build the large
meditation pyramid out of? Well, all together I built several
hundred pyramids, out of all sorts of materials, from 1 inch to 12
feet on the base. The meditation pyramid that I did the brainwave
experiments in was made of aluminum tubing 3/4 inch diameter. On the
subject of materials, I have found that different materials have
different effects.
Some of these effects can be classified as "hardcore scientific" and
some are purely subjective states reported by the person having the
experience. A.K.A. "a feeling inside". If you are using metal
materials then I recommend not to use young plants, because from
what I can tell, the effect is too intense for them at a young age.
If you are dealing with experimenting with purely biological effects
then I recommend using wood or organic materials. I have found that
in some circumstances that if you are looking for effects in VLV
(Very Low Voltage) then the only way to go is pure organic
materials.
I think that covers this batch of questions. I wish you well in your
experiments. The above reminds me of an experiment I did with the
12 foot based aluminum tubing pyramid that I have found very
interesting. I built an insulated copper coil of about 120 winds,
and placed it about 18 inches down from the apex of the pyramid.
I ran the wires down the northeast side of the pyramid aligned to
magnetic north. I connected the wires to a device that sent
electrical signals through it operating at 2 million cycles per
second at 50,000 volts A.C.. I let this run for several hours. I
noticed afterwards that it seemed to magnify the effect of the
pyramid, but what really got me was that there was a faint glow in
Page 3
the dark at the apex. This was related to the charging done before
hand.
What gave me part of the idea to try this was a picture I saw, a
kirlian photograph that showed a glow around the apex of a pyramid.
As far as research goes, a very good book on the subject is called
The Great Pyramid by Christopher Bird. In it he covers the history
and mathematics involved especially in relationship to the solar
system.
I would recommend it as one of the best researched books in this
area. This guy spent years digging through libraries all over the
world, using documents that are preserved in archives, listing some
of the earliest recorded information available.
--------------------------------------------------------------------
If you have comments or other information relating to such topics
as this paper covers, please upload to KeelyNet or send to the
Vangard Sciences address as listed on the first page.
Thank you for your consideration, interest and support.
Jerry W. Decker.........Ron Barker...........Chuck Henderson
Vangard Sciences/KeelyNet
--------------------------------------------------------------------
If we can be of service, you may contact
Jerry at (214) 324-8741 or Ron at (214) 242-9346
--------------------------------------------------------------------
Page 4