216 lines
12 KiB
Plaintext
216 lines
12 KiB
Plaintext
______________________________________________________________________________
|
||
| File Name : MRA.ASC | Online Date : 12/13/94 |
|
||
| Contributed by : Joel McClain | Dir Category : ENERGY |
|
||
| From : KeelyNet BBS | DataLine : (214) 324-3501 |
|
||
| KeelyNet * PO BOX 870716 * Mesquite, Texas * USA * 75187 |
|
||
| A FREE Alternative Sciences BBS sponsored by Vanguard Sciences |
|
||
|----------------------------------------------------------------------------|
|
||
The following requires the file MRA.GIF also on KeelyNet.
|
||
The file MRA.ZIP contains both this file MRA.ASC and the image MRA.GIF.
|
||
------------------------------------------------------------------------------
|
||
|
||
***** Please NOTE!! *****
|
||
|
||
This is a preliminary report that will be followed by updates with more
|
||
detail. Future versions will include various measurements of the components
|
||
used in the ciruit that is currently running. From all appearances at this
|
||
date, the circuit components will simply give varying outputs and do not
|
||
appear to be all that critical.
|
||
|
||
It was felt that this information should be released to the public as
|
||
rapidly as possible, rather than risk loss of the information or the demo by
|
||
'circumstances' beyond our control. There have been too many discoveries
|
||
which have disappeared by not being openly shared. We would rather risk
|
||
being 'flamed' by other experimenters who actually BUILD THE CIRCUIT than
|
||
take the chance of the information being lost by keeping it within a select
|
||
group.
|
||
|
||
Our two primary fears are that someone will attempt to patent what is
|
||
intended to be a gift to humanity, possibly with an intent to profit from
|
||
others work or to lock it away, the other that it might be suppressed in
|
||
some other fashion.
|
||
|
||
Therefore, the widest possible distribution is requested, and duplication
|
||
attempted wherever possible. At the time of this correction to the original
|
||
file, we have confirmation as to the numbers and others are working on the
|
||
circuit on their own. Please take this information in the spirit of how it
|
||
is given, as a gift to humanity.
|
||
|
||
The inventors are Joel McClain and Norman Wootan.
|
||
You can contact them via KeelyNet or directly.
|
||
|
||
The circuit is being tested at various levels and attempts at duplication
|
||
are under way. At this point, there is only one circuit. We will openly
|
||
post other successful duplications or failures. Please feel free to try it
|
||
yourself. The cost is minimal.
|
||
|
||
One other point, the crystal transducer was thought to be barium titanate
|
||
and there is reason to believe it is in fact titanium zirconate. These are
|
||
disc shaped, about 3" in diameter with a 1" diameter hole in the center. The
|
||
disc is about 3/8" thick and is coated with silver on both sides. Thank you
|
||
for your open-mindedness. They are advertised in the back of many
|
||
electronics magazines for about $5 each. We have access to a small stock
|
||
and might offer them for experiments should people ask for them.
|
||
|
||
Good luck and SEIZE THE DAY!
|
||
|
||
------------------------------------------------------------------------------
|
||
|
||
The Magnetic Resonance Amplifier (MRA)
|
||
|
||
Discovered and proven December 12, 1994
|
||
and shared with the world on December 13, 1994
|
||
|
||
by Joel McClain and Norman Wootan
|
||
|
||
MRA is the Magnetic Resonance Amplifier. With low level ultrasonic input
|
||
signals, the MRA produces usable direct current power at levels above unity.
|
||
This circuit is based upon the work and theories of John Ernst Worrell Keely,
|
||
and is offered into the public domain in his memory.
|
||
|
||
Without lengthy discussion about the ether, tetrahedral geometric virtual
|
||
rotation, mass aggregate resonance or the rule of nines, it is possible to
|
||
understand this circuit as basically a tuned magnetic and quartz amplifier.
|
||
|
||
However, it WAS necessary to study those subjects in order to design and build
|
||
the MRA, so if you want to fully realize how it works, avail yourself of the
|
||
files on KeelyNet which contain all of that and much, much more.
|
||
|
||
In the schematic, MRA.GIF, there is a tunable low power oscillator, which
|
||
supplies a signal to one side of a barium titanite transducer. The opposite
|
||
side of the transducer is connected to a primary coil, which is wrapped around
|
||
a barium ferrite magnet core. The opposite end of the primary goes back to
|
||
the oscillator.
|
||
|
||
A secondary is wrapped around the primary, and is connected to an ordinary
|
||
bridge rectifier, and the output of the bridge is applied to a DC load. A
|
||
filter capacitor can be used on the output of the bridge, and was used on the
|
||
MRA which we built. Additionally, a load resistor across the capacitor will
|
||
keep the output DC from getting too high as the circuit is tuned. We found
|
||
that a 30 ohm, 10 watt resistor was sufficient.
|
||
|
||
Once this has been assembled, put a voltmeter across the output resistor to
|
||
monitor the voltage rise as the circuit is tuned. Adjust the oscillator
|
||
frequency to provide the highest DC output. During this process, be aware
|
||
that the voltages across the piezo and the coil will be VERY MUCH HIGHER than
|
||
the signal level which you are applying. We have seen combined voltages of
|
||
almost 1000VAC with only 30VAC of signal input.
|
||
|
||
When the circuit is tuned, the magnet will be "singing" at around 8000 to
|
||
11000Hz. If the piezo sings, you are exceeding its power capabilities, and
|
||
will need to reduce the number of turns on your primary. The frequency that
|
||
resonates both the piezo and the magnet at optimum resonance will be three
|
||
times (three octaves above) the frequency at which the magnet is singing.
|
||
This is the nine harmonics that are mentioned in the Rule of Nines.
|
||
|
||
To test the circuit, place a precision, high wattage, low ohm resistor in
|
||
series with the output from the oscillator to the piezo, and measure the
|
||
voltage drop. It should be very small, less than 0.1VAC. Use this value to
|
||
determine current in the series circuit, and then calculate power.
|
||
|
||
Next, measure the DC voltage across your output load resistor, and once again
|
||
calculate power. You should be between three to four times above the
|
||
previously calculated input power.
|
||
|
||
Once the circuit is in operation, you will note that the voltage will vary by
|
||
0.1VDC or more, depending upon the time of day. This is due to the nature of
|
||
etheric forces inherent to the earth's magnetic field. Watch for peak voltage
|
||
at or before sunrise.
|
||
|
||
In our circuit, we measured 0.084VAC drop across a two ohm series resistor,
|
||
for a total of 0.685W dissipation in the primary. With this, we attained
|
||
2.75W of output power, and used this to drive a lamp and a motor. Increasing
|
||
the signal voltage had the effect of decreasing the primary current while
|
||
boosting output power, thus improving the power gain ratio. We believe that
|
||
larger power systems can be built by using larger coils, more piezos, and a
|
||
lower frequency, as long as the aggregate combination is within the resonant
|
||
frequency range of the components.
|
||
|
||
The MRA is essentially a means of releasing the electrical energy stored in
|
||
magnets. As such, it is an AC battery with DC output. It can be used for a
|
||
portable, self-charging power supply with a solid state oscillator and
|
||
rechargable battery. For those who want a synopsis of the technology, the
|
||
following paragraphs are offered, but it is strongly suggested that you follow
|
||
up this reading with a more thorough study of the KeelyNet files.
|
||
|
||
Matter = energy. To change the matter, change the energy. Creation of a
|
||
magnet is achieved by a process which causes the matter to be both expanded
|
||
and compressed at the same time, with the result that a magnet is in a constant
|
||
state of collapse. This is why magnets attract material with similar lattice
|
||
structures, as they attempt to fill the energy void which created them. The
|
||
"domains" of the magnet are fixed after the process of magnetization, and the
|
||
only way to extract electrical energy is to physically spin a coil relative to
|
||
a magnet.
|
||
|
||
However, it is also possible to induce virtual rotation by applying the
|
||
resonant frequency of the magnet, which causes the lattices and the domains to
|
||
vibrate. However, the power required to do this is greater than the energy
|
||
released by the virtual rotation. Therefore, it is necessary to increase the
|
||
vibration without using excessive current.
|
||
|
||
The piezo has a virtually inexhaustable supply of free electrons, and it
|
||
releases them when it is stressed. Using the piezo in series with the primary
|
||
coil will almost eliminate primary current, because it is voltage which
|
||
stresses the piezo, not current. Therefore, the piezo can be stressed with
|
||
very little actual power, and provide the current to the primary coil, which
|
||
vibrates the domains of the magnet.
|
||
|
||
The piezo is the catalyst for the circulating current with the primary coil.
|
||
The circulating current is additive, and this is the reason for the high
|
||
potentials developed across both the piezo and the primary coil.
|
||
|
||
It is at this point that resonance becomes important. You MUST have three
|
||
octaves of separation between the magnet resonant frequency and the signal
|
||
applied to the piezo. The circulating current is rich in harmonics, and this
|
||
is necessary for the operation of the circuit.
|
||
|
||
Although the circuit is simple, it utilizes the concepts of PHI, of virtual
|
||
rotation, of tetrahedral geometry, piezo and transformer theory, and
|
||
electrical knowledge. It is not suggested as a beginner project as a result
|
||
of the high voltages present. For engineers and technicians of experience, it
|
||
may be difficult to accept that the MRA is above unity. The ramifications are
|
||
emormous. Hopefully, it will help to build a better world.
|
||
------------------------------------------------------------------------------
|
||
Vangard Note
|
||
|
||
This device incorporates power multiplication principles using multiple
|
||
resonances as claimed by Keely and Hendershott. It also corresponds in some
|
||
ways with Floyd Sweet's VTA and Joe Parr's energy spheres from pyramids.
|
||
|
||
Joel called Sunday night in an excited state. He and Norman took turns
|
||
explaining what they had achieved using this circuit. The power input
|
||
measurements were about 600mWatts and yet the circuit was generating about
|
||
2.5 Watts on the output. Norman hooked up a DC motor and he said it was
|
||
spinning like crazy in addition to a light bulb glowing brightly.
|
||
|
||
Norman was laughing and said they'd beat Harold Puthoffs' One Watt Challenge
|
||
as issued at the 1994 ISNE conference in Denver. This has created quite a
|
||
bit of excitement and Puthoff now has a FAX'd copy of the circuit. No doubt
|
||
it will be everywhere in a very short time. The hope by Joel and Norman is
|
||
that others will duplicate the initial effect and be able to expand on it to
|
||
derive useful power.
|
||
|
||
Sweet claimed something on the order of 1:3,000,000 over-unity. The input
|
||
power to his device was 10 VAC at 29uamps (290mWatts). The output had been
|
||
loaded to as high as 3,000 Watts.
|
||
|
||
The initial MRA circuit is something on the order of 1:5 and is believed to
|
||
be scalable. Joel says the coil he had wound around the barium ferrite
|
||
magnet was not in the least precision and he is of the mind that a huge coil
|
||
surrounding the magnet will produce a proportional increase in power.
|
||
|
||
Early talks with various KeelyNetters about the Sweet circuit led many of us
|
||
to believe that Barium, when excited, rings for a long time when the exciter
|
||
is removed. At the ISNE conference, Don Watson confirmed this with his
|
||
analogy of glowing luciferase as found in fireflys or other phosphorescent
|
||
materials. A weak stimulation continues to produce light for a time after
|
||
the stimulation is removed.
|
||
|
||
So, here is a wonderful opportunity to build a pioneering device. If you
|
||
have questions or suggestions, you may direct them to Joel McClain or Norman
|
||
Wootan at KeelyNet.
|
||
|
||
I think they both need to be commended for their willingness to share what
|
||
many would keep proprietary or die with the secret.............>>> Jerry
|
||
|
||
------------------------------------------------------------------------------ |