2021-04-15 13:31:59 -05:00

199 lines
9.1 KiB
Plaintext

(word processor parameters LM=8, RM=75, TM=2, BM=2)
Taken from KeelyNet BBS (214) 324-3501
Sponsored by Vangard Sciences
PO BOX 1031
Mesquite, TX 75150
There are ABSOLUTELY NO RESTRICTIONS
on duplicating, publishing or distributing the
files on KeelyNet except where noted!
February 15, 1992
HYDEHATH.ASC
--------------------------------------------------------------------
This file is from the July/Aug/Sep 1991
ELECTRIC SPACECRAFT JOURNAL
P.O. BOX 18387
Asheville, North Carolina 28814
Subscriptions are $24 for USA, $29 for Canada/Mexico and $39 for
other countries. All subscriptions must be in US dollars.
Electric Spacecraft Journal is an interactive platform addressed to
those doing creative research and experiments in electric and
magnetic technologies useful for spacecraft, and to those interested
in the subject. Its goal is to help individuals to communicate and
cooperate, both formally and informally, and to encourage individual
capabilities.
--------------------------------------------------------------------
Vangard Note...
Though ESJ has only been in publication for three issues now, we
find it most stimulating and informative. The best part is that
the authors actually DO experiments and document them in the
articles so that the readers can try it themselves. This can
lead to many other ideas for experiments as seen through the
diverse perspectives of others. THIS MAGAZINE IS WORTH
SUBSCRIBING TO IF YOU HAVE A PENCHANT FOR EXPERIMENTATION!
--------------------------------------------------------------------
Page 41
Network Notes
Information from : George Hathaway
39 Kendall Avenue
Toronto, Ontario
Canada M5R1L5
Hyde Generator Report
George Hathaway has built the electrostatic portion of the Hyde
generator. He explains :
"Between stator segments we only saw some 10 volts P-P when
excited by up to 5,000 volts on the 'Excitor' end plates and
operation at up to 4,000 rpm with an 8-1/2" diameter rotor.
Page 1
This was unaffected by gap distance between excitor plates
(and the) rotor, as well as adjustment of the commutator.
Hyde states that he has seen up to 300 KV between rotor
segments! Either he still is withholding some information
from the patent, or has been fooling himself.
His little diode/capacitor circuit for stepping down high
voltage is useless, as shown in the patent, [US Patent #
4,897,592 as reported in out last issue, Ed.] (listed on
KeelyNet with diagrams as HYDEGIF) for doing what Hyde
claims.
In fact, I believe that only an actively-switched voltage
divider will do what he claims that circuit should do. My
tests have been witnessed by two others, an engineer and a
physicist. My device has 24 stator and 12 rotor segments
each side."
--------------------------------------------------------------------
The following is taken from Moray Kings paper regarding
the Hyde device and listed on KeelyNet as ZPE3.
It shows that Hyde has gone beyond his patent specifications.
--------------------------------------------------------------------
The rotors in the patent description were electrically connected
by brushes to their adjacent stators, BUT HYDE HAS SINCE
IMPROVED HIS INVENTION HIS INVENTION BY REMOVING THESE CONTACT
(66). The field from the excitor plates induces a polarization
between the connected rotors.
The segments on both rotors are aligned to allow them to shield
an aligned pair of stator segments. As the rotor spins, aligned
stator segments are ALTERNATELY EXPOSED and SHEILDED from the
excitor polarization field.
Each stator segment is electrically connected to its counterpart
on the other stator through a PULSE RECTIFIER CIRCUIT in which
the transient voltage pulses are stepped down and then channeled
to a combining rectifier output circuit (not shown).
It is a surprise that such a simple device as Hyde's could
output anomalous power. An analysis using just classical physics
would predict that the voltage induced across a stator segment
pair would swing between zero and the excitor plate voltage since
this is the steady state limit for the shielded and exposed
conditions. This is observed when the rotor is spun slowly.
However, when the rotor is spun on the order of 6000 rpm, a 3 KV
potential across the excitor plates yields stator pulses in
excess of 300 KV with a very small drag on the rotor (67).
--------------------------------------------------------------------
The following is from the Hyde Patent (listed as text only under
HYDEPTNT on KeelyNet or with .GIFs and text as HYDEGIF) :
--------------------------------------------------------------------
It was therefore found that working embodiments of the present
invention require less than ten percent of the electrical
Page 2
output energy for the mechanical input.
Further, ACCORDING TO ONE PROTOTYPE model of the invention, a
relatively high output voltage of 300,000 volts was obtained
across the stators.
By reason of such high voltage, an output circuit 30 having a
voltage reducing and current multiplying attribute as
hereinbefore described was selected so as to render the system
suitable for many practical applications.
--------------------------------------------------------------------
Of course, inventors who seek patents do so with the hope of
financial recompense for their efforts, that is the primary
inducement to seek the patent in the first place.
Put yourself in the inventors place as to just how much detail you
would place in a patent open to public access for the price of
$1.00? Patents are SUPPOSED to be written with sufficient detail
that anyone "skilled in the art" would be able to duplicate the
invention.
It would be very helpful if the inventor would provide full details
and possibly a video showing his device in operation. That video
could then be sold for extra income. He could additionally offer
detailed plans if he wanted confirmation that his device worked from
independent sources. This would further accelerate interest in the
device and no doubt lead to vast improvements in the technology.
As in the HYDEOFFR file on KeelyNet, the lawyers have been empowered
to offer a non-negotiable, non-exclusive license for 5 million plus
$2 per machine produced. Since the inventor is in hiding due to
threats against his life, the only contact possible is through the
lawyers and possibly Moray King.
We will continue to keep you posted on what goes on with this
particular free energy device based on our sources of information.
--------------------------------------------------------------------
If you have comments or other information relating to such topics
as this paper covers, please upload to KeelyNet or send to the
Vangard Sciences address as listed on the first page.
Thank you for your consideration, interest and support.
Jerry W. Decker.........Ron Barker...........Chuck Henderson
Vangard Sciences/KeelyNet
--------------------------------------------------------------------
If we can be of service, you may contact
Jerry at (214) 324-8741 or Ron at (214) 242-9346
--------------------------------------------------------------------
Page 3