69 lines
2.6 KiB
Plaintext
69 lines
2.6 KiB
Plaintext
ACTUALLY DEMUFFINING A DISK: Using Castle Wolfenstein as an
|
||
example. (I used this because it is the only thing that I that
|
||
have that wasn't cracked!)
|
||
|
||
1) Boot up Castle Wolfenstein. Before the cursor appears press
|
||
CTRL-C. The one character buffer in the keyboard will
|
||
remember it and when DOS asks for a character it will give
|
||
the CTRL-C. The CTRL-C will cause Castle Wolfenstein's hello
|
||
program to break into BASIC after it is loaded.
|
||
|
||
2) Enter the monitor with "CALL-151". Enter "4000<B800.BFFFM"
|
||
this will move MUSE's RWTS down to a "safe" area of memory.
|
||
|
||
3) Insert a "slave" disk in drive one and boot the disk with
|
||
6 CTRL-P (If your disk drive is in slot 6 of course). Press
|
||
RESET when the prompt (]) appears. This will prevent your
|
||
"hello" program from erasing MUSE's DOS.
|
||
|
||
4) Insert a disk with at least 10 free sectors on it. Save out
|
||
the RWTS with "BSAVE MUSE-RWTS,A$4000,L$800".
|
||
|
||
5) Brun Advanced Demuffin. Move the light bar to "LOAD A NEW
|
||
RWTS MODULE" and press RETURN.
|
||
|
||
6) Type the page number to load the RWTS at ($B8). Then type
|
||
the file name that you saved it under and press RETURN.
|
||
|
||
7) Move the light bar to "CONVERT DISK" and press RETURN. You
|
||
do want to change default values.
|
||
|
||
8) The disk is a thirteen sector disk, so enter a "3" for
|
||
the question "SECTORS PER TRACK? (13/16)".
|
||
|
||
9) You want to copy from track $03,sector $00 to track $22,
|
||
sector $0c. The increment is $1. (you are copying from track
|
||
$03 because you don't need MUSE's DOS.)
|
||
|
||
10) You might encounter some errors, so use "1""as the number or
|
||
retries.
|
||
|
||
11) If you have two drives in the same slot, enter a "2" for
|
||
drive to copied to.
|
||
|
||
12) If you only have one drive, enter a "1" for drive to be
|
||
copied to.
|
||
|
||
13) Insert the proper disk(s) when Advanced Demuffin prompts you.
|
||
|
||
|
||
Advanced Demuffin will then start converting the disk. After the
|
||
disk has been converted, and Advanced Demuffin displays this
|
||
message "PRESS ANY KEY TO CONTINUE", you should write down all
|
||
the sectors that read errors on them. If you have a printer, all
|
||
you have to do is press the slot number of the printer, and
|
||
Advanced Demuffin will dump the screen to the printer.
|
||
|
||
You should then re-convert the sectors that had read errors (use
|
||
at least 2-retries). If those sectors don't convert this time,
|
||
they are probably just un-written DOS 3.2 sectors.
|
||
|
||
Use Super Copy III or Master Create to copy dos on to the target
|
||
disk. You should then rename the "hello" program from ^HELLO to
|
||
HELLO.
|
||
|
||
You should then have (hopefully) a cracked copy of Castle
|
||
Wolfenstein!
|
||
|
||
|